Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Performance Tools”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Experimental validation of solid oxide fuel cell polarization modeling: An LSM-YSZ/YSZ/Ni-YSZ case study

Polarization modeling based on the measured I-V curves is a useful tool for analyzing SOFC performance and diagnosing performance limitations. Using the polarization model, the overpotential of a cell is usually separated into different polarization contributions, including area specific ohmic polarization, activation polarization, and anodic and cathodic concentration polarizations. In this study, we aim to experimentally validate the accuracy of the polarization model. As a case study, anode-supported cells with LSM-YSZ/YSZ/Ni-YSZ configuration are used. By curve-fitting the I-V curves of a cell tested under different cathode oxygen partial pressures into the polarization model, the contributions of different polarization losses are quantified. To validate the polarization model, independent experiments/studies including electrochemical impedance spectroscopy, cathode kinetics study, ex-situ diffusivity measurement, and tortuosity measurement using 3D reconstructed anode are conducted. The results from polarization modeling and from validation studies are in good agreement, thereby validating the polarization model for SOFC performance analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vacuum vessel design with lofted toroidal surfaces for a QHS configuration

A vacuum vessel in between the hot plasma and the magnetic coils is crucial for a fusion reactor. In this study, a tool is presented to perform the initial design of such a vessel automatically. Starting from the last closed flux surface, an algorithm is developed which lofts this manifold out as much as possible. At the same time, the algorithm makes sure that no intersection with the coils takes place. In the presented work, this algorithm is applied to the HSX stellarator and it has been verified that the resulting vessel wall can be built from an engineering perspective. Using field line tracing, the strikepoints on the vessel wall indicate the initial locations for a divertor.

HSX↗

The dissolution behavior of borosilicate glasses in far-from equilibrium conditions

In far-from-equilibrium conditions, the dissolution of borosilicate glasses used to immobilize nuclear waste is known to be a function of both temperature and pH. The aim of this paper is to study effects of these variables on three model waste glasses (SON68, ISG, AFCI). To do this, experiments were conducted at temperatures of 23, 40, 70, and 90 °C and pH(RT) values of 9, 10, 11, and 12 with the single-pass flow-through (SPFT) test method. The results from these tests were then used to parameterize a kinetic rate model based on transition state theory. Both the absolute dissolution rates and the rate model parameters are compared with previous results. Discrepancies in the absolute dissolution rates as compared to those obtained using other test methods are discussed. Rate model parameters for the three glasses studied here are nearly equivalent within error and in relative agreement with previous studies. The results were analyzed with a linear multivariate regression (LMR) and a nonlinear multivariate regression performed with the use of the Glass Corrosion Modeling Tool (GCMT), which is capable of providing a robust uncertainty analysis. This robust analysis highlights the high degree of correlation of various parameters in the kinetic rate model. As more data are obtained on borosilicate glasses with varying compositions, the effect of glass composition on the rate parameter values could possibly be obtained. This would allow for the possibility of predicting the forward dissolution rate of glass based solely on composition

Neeway, James J.↗

Risk assessment and ventilation modeling for hydrogen releases in vehicle repair garages

The availability of repair garage infrastructure for hydrogen fuel cell vehicles is becoming increasingly important for future industry growth. Ventilation requirements for hydrogen fuel cell vehicles can affect both retrofitted and purpose-built repair garages and the costs associated with these requirements can be significant. A hazard and operability (HAZOP) study was performed to identify risk-significant scenarios related to light-duty hydrogen vehicles in a repair garage. Detailed simulations and modeling were performed using appropriate computational tools to estimate the location, behavior, and severity of hydrogen release based on key HAZOP scenarios. Here, this work compares current fire code requirements to an alternate ventilation strategy to further reduce potential hazardous conditions. Modeling shows that position, direction, and velocity of ventilation have a significant impact on the amount of instantaneous flammable mass in the domain.

08 HYDROGEN↗

Green micromachining of ceramics using tungsten carbide micro-endmills

This paper presents an experimental analysis on micromachining of green-state silicon carbide (SiC) and aluminum nitride (AlN) using uncoated tungsten carbide (WC) micro-endmills. Although the unique properties of ceramics make them ideal materials for many applications involving micro-scale features, the industrial adaptation of ceramics at the micro-scale has been hindered due to the lack of viable ceramic micro-manufacturing techniques. Green micromachining (GMM), where micro-scale features are created by micromachining green-state ceramics that contain ceramic particles and a polymer binder, offers a potential solution for this problem by affording tremendous improvements in micromachinability with respect to sintered ceramics. After the completion of GMM, the green parts are debound and sintered to obtain the final component with the desired microscale features. In this work, we evaluated GMM characteristics of powder-injection molded green-state SiC and AlN to correlate process conditions and green-material compositions with the micromachining forces, quality, and tool wear. An experimental study that involves full immersion micromilling tests with 254 μm diameter micro-endmills at different cutting speeds and feed rates is conducted. For each of the two materials, two binder states (with and without wax) and two powder states (with micro particles only, or with both micro- and nanoparticles) are investigated. Green micromachining forces, specific energies and the resulting surface roughness are analyzed quantitatively. A qualitative analysis of burr formation and channel quality, as well as a preliminary study on micro-tool wear are also performed. Both the machining conditions and the material compositions are seen to have a strong effect on micro-machinability of green-state ceramics. Overall, we conclude that GMM can be a viable ceramic micro-manufacturing strategy if favorable (or optimal) micromachining and material parameters are identified through the presented (or a similar) micromachinability study.

36 MATERIALS SCIENCE↗

Evaluation of Preoperative and Intraoperative Mobile Gamma Camera Imaging in Sentinel Lymph Node Biopsy for Melanoma Independent of Preoperative Lymphoscintigraphy

Sentinel lymph node biopsy (SLNB) is standard practice for staging cutaneous melanoma. High false negative rates have increased interest in adjunctive techniques for localizing SLNs. Mobile gamma cameras (MGCs) represent potential tools to enhance SLNB performance. Twenty eligible melanoma patients underwent 99mTc sulfur colloid injection and standard lymphoscintigraphy with a fixed gamma camera (FGC). A survey using a 20 cm square MGC, performed immediately preoperatively by the study surgeon, was used to establish an operative plan while blinded to the FGC results. Subsequently, SLNB was performed using a gamma probe and a novel 6 cm diameter handheld MGC. A total of 24 SLN basins were detected by FGC. Prior to unblinding, all 24 basins were identified with the preoperative MGC, and the operative plan established by preoperative MGC imaging was confirmed accurate by review of the FGC images. All individual SLNs were identified during intraoperative MGC imaging, and in 5/24 (21%) cases, additional clinical information was obtained from the MGC. Preoperative MGC images provide information consistent with FGC images for planning SLNB and in some cases provides additional information that aided in surgical decision-making.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

High fidelity multiphysics tightly coupled model for a lead cooled fast reactor concept and application to statistical calculation of hot channel factors

A tightly coupled multiphysics code system is established using the MOOSE framework for hot channel factor (HCF) evaluation on a Lead Fast Reactor (LFR) concept. The coupled system is driven by the Griffin multiphysics coupling capability under which the MOOSE Heat Transfer module and NekRS computational fluid dynamics solver are coupled for conjugate heat transfer using the Cardinal application. The coupled capability is demonstrated on an LFR assembly model based on materials and geometry of a prototypical lead-cooled fast reactor design by Westinghouse Electric Company, LLC. Moreover, the work integrates the Multiphysics Object Oriented Simulation Environment (MOOSE) Stochastic Tools Module (STM) to perform calculations for statistical analysis of HCF. Furthermore, the coupling strategy and workflow demonstrated in this paper is not only useful for predicting accurate hot channel factors for different kinds of advanced reactors but also for other engineering applications such as control rod worth assessment, generation of high-fidelity database for Artificial intelligence (AI)/machine learning (ML) training, design optimization and multi-resolution modeling.

Cardinal↗

Performance evaluation of surface riding wave energy converter with linear electric generator

In this work, we devised a new WEC (wave energy converter) called SR-WEC (Surface Riding WEC). The SR-WEC consists of two bodies: the outer cylinder with an armature assembly (body #1) and a magnet assembly (body #2) sliding inside the armature. For the SR-WEC, the relative sliding displacement and velocity are caused by gravity acceleration and the outer cylinder's motions, and they lead to electrical power generation. To evaluate its performance, a numerical simulation tool was developed, which solves the fully-coupled floater-mooring-generator dynamics. During the developing stage, the appropriate hydrodynamics model, sliding mechanics model, mooring dynamics model, and LEG (linear electric generator) electro-magnetic model were independently developed and then fully coupled in time domain to account for the cross-coupling interactions among them. Then, the developed simulation tool was verified component by component against various laboratory tests. Subsequently, systematic parametric studies were conducted with several important design parameters under various wave conditions to enhance power generation. After that, the average output power was evaluated in enlarged operational wave conditions. The present SR-WEC is particularly designed to be efficient at low sea states, which is good since they cover the majority of typical annual sea states.

42 ENGINEERING↗

Changes in Electronic Structure upon Li Deintercalation from LiCoPO 4 Derivatives

On the path toward the design of Li-ion batteries with increased energy densities, efforts are focused on the development of positive electrodes that can maximize the voltage of the full cell. However, the development of novel materials that operate at high voltage, while also showing high efficiency and meeting strict safety standards, is an ongoing challenge. LiCoPO 4 is being explored as a possible candidate, as the Co 2+/3+ redox couple operates at 4.8 V versus Li + /Li 0 . The presence of phosphate groups is typically expected to stabilize the compound against oxygen loss, yet the changes in Co-O bonding upon Li extraction have not been ascertained. In addition, LiCoPO 4 is riddled with problems relating to poor transport and strain in the crystal structure of the delithiated phase, which handicap its use as a high-voltage electrode. In this work, substituting ions to generate Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 is found to stabilize both the electronic structure and crystal structure and, therefore, substantially improve the ability to fully utilize the redox capacity of the material. A thorough study by spectroscopic tools, combined with computations of the electronic structure, was used to probe changes in chemical bonding. The measurements revealed the existence of redox gradients between surface and bulk that are common in other materials that react at high potential. Lastly, the study offers a comprehensive understanding of the fundamental reactions in LiCoPO 4 -type frameworks, while further demonstrating that ion substitution is an effective tool for improving their performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterizing bonding patterns in diradicals and triradicals by density-based wave function analysis: A uniform approach

Density-based wave function analysis enables unambiguous comparisons of electronic structure computed by different methods and removes ambiguity of orbital choices. Here, we use this tool to investigate the performance of different spin-flip methods for several prototypical diradicals and triradicals. In contrast to previous calibration studies that focused on energy gaps between high and low spin-states, we focus on the properties of the underlying wave functions, such as the number of effectively unpaired electrons. Comparison of different density functional and wave function theory results provides insight into the performance of the different methods when applied to strongly correlated systems such as polyradicals. We also show that canonical molecular orbitals for species like large copper-containing diradicals fail to correctly represent the underlying electronic structure due to highly non-Koopmans character, while density-based analysis of the same wave function delivers a clear picture of bonding pattern.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequential Doping of Ladder-Type Conjugated Polymers for Thermally Stable n-Type Organic Conductors

Doping of organic semiconductors is a powerful tool to optimize the performance of various organic (opto)electronic and bioelectronic devices. Despite recent advances, the low thermal stability of the electronic properties of doped polymers still represents a significant obstacle to implementing these materials into practical applications. Hence, the development of conducting doped polymers with excellent long-term stability at elevated temperatures is highly desirable. Here, we report on the sequential doping of the ladder-type polymer poly(benzimidazobenzophenanthroline) (BBL) with a benzimidazole-based dopant (i.e., N-DMBI). By combining electrical, UV–vis/infrared, X-ray diffraction, and electron paramagnetic resonance measurements, we quantitatively characterized the conductivity, Seebeck coefficient, spin density, and microstructure of the sequentially doped polymer films as a function of the thermal annealing temperature. Importantly, we observed that the electrical conductivity of N-DMBI-doped BBL remains unchanged even after 20 h of heating at 190 °C. This finding is remarkable and of particular interest for organic thermoelectrics.

36 MATERIALS SCIENCE↗

Powerful Organic Molecular Oxidants and Reductants Enable Ambipolar Injection in a Large-Gap Organic Homojunction Diode

Doping has proven to be a critical tool for enhancing the performance of organic semiconductors in devices like organic light-emitting diodes. However, the challenge in working with high-ionization-energy (IE) organic semiconductors is to find p-dopants with correspondingly high electron affinity (EA) that will improve the conductivity and charge carrier transport in a film. Here, we use an oxidant that has been recently recognized to be a very strong p-type dopant, hexacyano-1,2,3-trimethylene-cyclopropane (CN6-CP). The EA of CN6-CP has been previously estimated via cyclic voltammetry to be 5.87 eV, almost 300 meV higher than other known high-EA organic molecular oxidants. We measure the frontier orbitals of CN6-CP using ultraviolet and inverse photoemission spectroscopy techniques and confirm a high EA value of 5.88 eV in the condensed phase. The introduction of CN6-CP in a film of large-band-gap, large-IE phenyldi(pyren-1-yl)phosphine oxide (POPy 2 ) leads to a significant shift of the Fermi level toward the highest occupied molecular orbital and a 2 orders of magnitude increase in conductivity. Using CN6-CP and n-dopant (pentamethylcyclopentadienyl)(1,3,5-trimethylbenzene)ruthenium (RuCp*Mes)2, we fabricate a POPy 2 -based rectifying p–i–n homojunction diode with a 2.9 V built-in potential. Blue light emission is achieved under forward bias. Furthermore, this effect demonstrates the dopant-enabled hole injection from the CN6-CP-doped layer and electron injection from the (RuCp*Mes) 2 -doped layer in the diode.

36 MATERIALS SCIENCE↗

UniKP: a unified framework for the prediction of enzyme kinetic parameters

Prediction of enzyme kinetic parameters is essential for designing and optimizing enzymes for various biotechnological and industrial applications, but the limited performance of current prediction tools on diverse tasks hinders their practical applications. Here, we introduce UniKP, a unified framework based on pretrained language models for the prediction of enzyme kinetic parameters, including enzyme turnover number (k cat ), Michaelis constant (K m ), and catalytic efficiency (k cat / K m ), from protein sequences and substrate structures. A two-layer framework derived from UniKP (EF-UniKP) has also been proposed to allow robust k cat prediction in considering environmental factors, including pH and temperature. In addition, four representative re-weighting methods are systematically explored to successfully reduce the prediction error in high-value prediction tasks. We have demonstrated the application of UniKP and EF-UniKP in several enzyme discovery and directed evolution tasks, leading to the identification of new enzymes and enzyme mutants with higher activity. UniKP is a valuable tool for deciphering the mechanisms of enzyme kinetics and enables novel insights into enzyme engineering and their industrial applications.

59 BASIC BIOLOGICAL SCIENCES↗

Comparison of G4beamline and ICOOL Simulations of a Neutrino Factory/Muon Collider Front End and Simplification in RF Structure Requirements

Earlier studies on the front end of a neutrino factory or muon collider have relied on a single simulation tool, ICOOL. We present here a cross-check against another simulation tool, G4beamline. We also perform a study to simplify the RF structure requirements by reducing the number of RF cavity frequencies and gradients. This investigation is also pertinent to engineering tolerances expected of these structures. We conclude with a discussion of future studies.

43 PARTICLE ACCELERATORS↗

PP composites with Hybrid Nanofillers: NTC phenomenon

Electric conductive plastic composites have a wide potential for commercial applications, some examples are EMI shielding housings and components in automotive industry and in consumer electronics, equipments in health care sector and fuel cell components. A phenomenon in conductive composites, especially in composites with carbon based fillers, is change of thermal induced change in conductivity as a result of morphological transitions. Usually the observed changes are practically irreversible. The phenomenon may cause increasing resistivity, usually called as 'positive temperature coefficient' (PTC) or decreasing resistivity, called 'negative temperature coefficient' (NTC), where the new morphology created by heat treatment is more favorable for electric conductivity compared to the original state. The existence of NTC is a sing of the lost potential in material design and processing. Therefore detailed information about the phenomenon gives us tools to develop high performance conductive materials. It this paper we discuss about NTC phenomenon observed in PP composites with CNT or in-situ synthesized CNT-PANi hybrid nanofiller with an amphiphilic dispersing agent. The goal of the paper is not to present a comprehensive model of this phenomenon; we present some experimental results which may be related to polymer-filler interactions. These details are a part of this complicated phenomenon.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

New developments for a chiral effective theory of nuclear matter

We report on the recent developments of a new effective field theory for nuclear matter. We present first the nuclear matter chiral power counting that takes into account both short- and long-range inter-nucleon interactions. It also identifies non-perturbative strings of diagrams, related to the iteration of nucleon-nucleon interactions, which have to be re-summed. The methods of unitary chiral perturbation theory has been shown to be a useful tool in order to perform those resummations and provide sensible results up-to next-to-leading order for the ground state energy per particle of nuclear matter, in-medium chiral quark condensate and the self-energy and axial-vector couplings of the pion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An analysis of HS6-5-2 steel viscosity in the semi-solid state

The main objective of this study was an analysis of the rheological properties of selected steel alloy in the semi-solid state. A knowledge of the rheological properties of material is crucial for the numerical modeling of the shaping technology. Semi-solid processing of metal alloys, also known as thixoforming processes, is an innovative method which has many advantages in comparison with classical metal forming and foundry processes. The most significant achievement of this particular study is the application of a viscometer which was specially designed for material tests executed at extremely high temperatures, such as the measurement of liquid or semi-liquid steel viscosity. This paper presents the results of a rheological analysis of HS6-5-2 (PN SW7M) tool steel. It was performed using a rotational viscometer with a stationary external cup. The results were used for the development of mathematical models of the apparent viscosity.

36 MATERIALS SCIENCE↗

Ion and electron cyclotron wall conditioning in stellarator and tokamak magnetic field configuration on WEGA

Discharge wall conditioning is an effective tool to improve plasma performance in tokamaks and stellarators. RF Discharge Conditioning (RFDC) techniques are envisaged for use during operational campaigns on superconducting devices like the ITER tokamak and W7-X stellarator, as alternative to DC Glow Discharge Conditioning which is inefficient in presence of magnetic fields. This contribution investigates RFDC in both the ion and electron cyclotron range of frequencies (ICRF and ECRF) on the WEGA device (Max-Planck-Institute for Plasma Physics, Greifswald, Germany) as preparation for W7-X operation. ECRF discharges produced by localised absorption of RF power at EC resonance layers suffer from poor radial discharge homogeneity in the tokamak vacuum magnetic field configuration, severely limiting the plasma wetted wall areas and consequently the conditioning efficiency. The non-localised production of ICRF discharges by collisional RF power absorption features much improved discharge homogeneity making Ion Cyclotron Wall Conditioning (ICWC) the favoured RFDC technique for superconducting tokamaks. RFDC with the stellarator vacuum magnetic field needs to aim at sufficient plasma densities at and outside the last closed flux surface (LCFS), maximising the convective plasma flux along the open field lines to the wall. Whereas for ICRF discharges this condition is easily fulfilled, on WEGA for He-ECRF discharges this could be achieved as well by off axis heating close to the LCFS. In stellarator magnetic field configuration it is found that He-ICWC for wall desaturation is at least one order of magnitude more efficient than He-ECWC. Novel ECWC methods are proposed that can decrease this efficiency gap with ICWC to a factor 2-3. The efficiency difference is less pronounced in case of H{sub 2}-ICWC and ECWC for isotopic exchange.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗