Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Multiple contrail streamers observed by radar

An unusual case of multiple streamers or filaments with the characteristic mare's tail pattern in vertical section has been observed by radar where the generating elements were condensation trails laid by high-altitude aircraft. The contrails were laid perpendicular to the wind, and, as they drifted, a multitude of streamers formed along each trail. The streamers extended from 9 km to the ground. RHI and PPI photographs at X and S band taken over a 2-hr period show the three-dimensional shape of the streamers due to the wind shear. Doppler measurements were also taken. The resulting velocity spectra are very narrow indicating little or no turbulence. Reflectivity factors were measured at various altitudes and show a decrease in reflectivity with distance from the generating line. Fall velocities based on the slopes of the streamer patterns varied from 0.4 to 1.4 m/sec. In general, the characteristics of the precipitation streamers were quite similar to those previously measured in naturally occurring cloud forms such as cirrus uncinus.

Konrad, T. G.↗

Investigations of multiple jets in a crossflow

Study was conducted to determine penetration and mixing characteristics of multiple jets of ambient temperature air injected perpendicularly into ducted mainstream of hot combustion gases.

Walker, R. E.↗

Improved multiple-target sputtering equipment

Sputtering chamber has been developed with multiple target. Several film layers can be deposited without repeated evacuation and refilling. Contamination through exposure to air is eliminated.

Shima, R.↗

Solving multiple scattering problems in planetary atmospheres

Multiple scattering problems, radiative transfer problems in planetary atmospheres within extended visible portion of the spectrum, are examined. The direct and inverse problems and the extinction coefficient are defined, along with other scattering characteristics. Albedos in semi-infinite and finite atmospheres are considered, as well as surface illumination, energy deposition, and polarization. The Eddington approximation figures prominently in the calculations. Precise numerical methods and analytical solutions are included.

Irvine, W. M.↗

A three parameter analytic phase function for multiple scattering calculations

A simple procedure was developed to fit the first three moments of an actual phase function with a three parameter analytic phase function. The exact Legendre Polynomial decomposition of this function is, suitable for multiple scattering calculations. The use of this function is expected to yield excellent flux values at all depths within a medium. Since it is capable of reproducing the glory, it can be used in synthetic spectra computations from planetary atmospheres. Accurate asymptotic radiance values can also be achieved as long as the single scattering albedo omega sub 0 is greater than or equal to 0.9.

Kattawar, G. W.↗

Study of multiple hologram recording in lithium niobate

The results of detailed experimental and theoretical considerations relating to multiple hologram recording in lithium niobate are reported. The following problem areas are identified and discussed: (1) the angular selectivity of the stored holograms, (2) interference effects due to the crystal surfaces, (3) beam divergence effects, (4) material recording sensitivity, and (5) scattered light from material inhomogeneities.

Gaylord, T. K.↗

TRW vortex-lattice method subsonic aerodynamic analysis for multiple-lifting-surfaces (N. surface) TRW program number HA010B

The program was designed to provide solutions of engineering accuracy for determining the aerodynamic loads on single- or multiple-lifting-surface configurations that represent vehicles in subsonic flight, e.g., wings, wing-tail, wing-canard, lifting bodies, etc. The preparation is described of the input data, associated input arrangement, and the output format for the program data, including specification of the various operational details of the program such as array sizes, tape numbers utilized, and program dumps. A full description of the underlying theory used in the program development and a review of the program qualification tests are included.

Gomez, A. V.↗

Standardized multiple output power supply

A comprehensive program to develop a prototype model of a standardized multiple output power supply for use in space flight applications is described. The prototype unit was tested and evaluated to assure that the design would provide near optimum performance for the planned application. The prototype design used a dc-to-dc converter incorporating reqenerative current feedback with a time-ratio controlled duty cycle to achieve high efficiency over a wide variation of input voltage and output loads. The packaging concept uses a mainframe capable of accommodating up to four inverter/regulator modules with one common input filter and housekeeping module. Each inverter/regulator module provides a maximum of 100 watts or 10 amperes. Each module is adaptable to operate at any voltage between 4.0 volts and 108 volts. The prototype unit contains +5, + or - 15 and +28 volt modules.

Ragusa, E. V.↗

Multiple jet study data correlations

Correlations are presented which allow determination of penetration and mixing of multiple cold air jets injected normal to a ducted subsonic heated primary air stream. Correlations were obtained over jet-to-primary stream momentum flux ratios of 6 to 60 for locations from 1 to 30 jet diameters downstream of the injection plane. The range of geometric and operating variables makes the correlations relevant to gas turbine combustors. Correlations were obtained for the mixing efficiency between jets and primary stream using an energy exchange parameter. Also jet centerplane velocity and temperature trajectories were correlated and centerplane dimensionless temperature distributions defined. An assumption of a Gaussian vertical temperature distribution at all stations is shown to result in a reasonable temperature field model. Data are presented which allow comparison of predicted and measured values over the range of conditions specified above.

Walker, R. E.↗

Multiple scattered radiation emerging from continental haze layers. 2: Ellipticity and direction of polarization

The ellipticity and the direction of polarization are calculated for radiation that has undergone multiple scattering from plane parallel layers. Both the radiation emerging from the top of the layer and that transmitted through the bottom are considered. Two different phase functions are used for the scattering layer: Rayleigh and haze L. The direction of polarization of the reflected radiation shows little variation as the optical depth of the layer increases, while there is a much larger variation for the transmitted radiation. When the optical thickness is small, the direction of polarization for haze L varies rapidly with zenith angle near those angles at which the single scattered polarization is zero. The ellipticity of the radiation from haze L layers increases at first in direct proportion to the optical thickness of the layer. In general the ellipticity of the transmitted radiation is considerably greater than that of the reflected because of the greater average number of photon collisions in the former case.

Plass, G. N.↗

Multiple docking adapter window for the S-190 experiment

Martin Marietta/NASA subcontracted the design, fabrication, testing, and installation of the multiple docking adapter S-190 experiment window assembly to Actron. In this paper, we primarily treat the thermal-optical analysis aspect of the design phase. The window is a pane of BK 7 glass 59.18 cm by 44.91 cm by 4.06 cm. Though it must meet many mechanical specifications, the optical requirements, dictated by the high acuity, distortion-free S-190 multiband camera system, are the most severe. Under operating conditions over any 7.6-cm circular area, the maximum rms deviation from the best-fitting plane must be less than 12.0 nm, and from the reference plane through the entire window, 60.0 nm.

Gimlett, J. I.↗

Optimum testing of multiple hypotheses in quantum detection theory

The problem of specifying the optimum quantum detector in multiple hypotheses testing is considered for application to optical communications. The quantum digital detection problem is formulated as a linear programming problem on an infinite-dimensional space. A necessary and sufficient condition is derived by the application of a general duality theorem specifying the optimum detector in terms of a set of linear operator equations and inequalities. Existence of the optimum quantum detector is also established. The optimality of commuting detection operators is discussed in some examples. The structure and performance of the optimal receiver are derived for the quantum detection of narrow-band coherent orthogonal and simplex signals. It is shown that modal photon counting is asymptotically optimum in the limit of a large signaling alphabet and that the capacity goes to infinity in the absence of a bandwidth limitation.

Yuen, H. P.↗

Estimation and detection of signals in multiplicative noise

We define a class of detection-estimation problems on matrix Lie groups in which the observation noise is multiplicative in nature. By examining the differential versions of the hypotheses, which are bilinear, we are able to derive the relevant likelihood ratio formula and the associated optimal estimation equations for the signal given the observations and the assumption that the signal is present. These estimation equations are of interest in their own right, in that they represent a finite-dimensional optimal solution to a nonlinear estimation problem and consist of a Kalman-Bucy filter along with the on-line computation of the solution of the associated Riccati equation, which is driven by the observations. The usefulness of these results is illustrated via an example concerning the detection of an actuator failure in a rigid-body rotational control system.

Willsky, A. S.↗

Pioneer 9 and OGO 5 observations of an interplanetary multiple shock ensemble on February 2, 1969

A multiple shock system was observed upstream (0.13 AU) of the earth by Pioneer 9 on February 2, 1969. The same system was observed at earth by Ogo 5 and was reported separately in the literature. This paper compares the two sets of observations in still further detail. Both magnetic-field and plasma data are used in a least-squares best-fit method to compute the characteristics of the fast forward shock wave (Pioneer 9 only) and two fast reverse shock waves. Nearly all major features (shock, piston, and tangential discontinuity) retained their characteristics during the transit of the shock ensemble from Pioneer 9 to Ogo 5. The genesis of the ensemble is believed to be due to a complex stream-stream interaction. A substantial density increase (including a large rise of alpha/proton abundance) at Ogo 5, but unobserved at Pioneer 9, is explained by a sudden meridional shift to a flow from below the ecliptic plane while the streams were en route to earth. This study demonstrates a spatial and temporal plasma inhomogeneity which is superimposed on the persistent major features.

Dryer, M.↗

Diagnostic accuracy of an ultrasonic multiple transducer cardiac imaging system

An ultrasonic multiple-transducer imaging system for intracardiac structure visualization is developed in order to simplify visualization of the human heart in vivo without radiation hazard or invasion of the body. Results of the evaluation of the diagnostic accuracy of the devised system in a clinical setting for adult patients are presented and discussed. Criteria are presented for recognition of mitral valva prolapse, mitral stenosis, pericardial effusion, atrial septal defect, and left ventricular dyssynergy. The probable cause for false-positive and false-negative diagnoses is discussed. However, hypertrophic myopathy and congestive myopathy were unable to be detected. Since only qualitative criteria were used, it was not possible to differentiate patients with left ventricular volume overload from patients without cardiac pathology.

Popp, R. L.↗

Multiple-bubble detector

Device is segmented multiple-input detector. Bubbles are fed into each section simultaneously. Detector output is improved by using passive replicators.

George, P. K.↗

Automatic multiple applicator electrophoresis

Easy-to-use, economical device permits electrophoresis on all known supporting media. System includes automatic multiple-sample applicator, sample holder, and electrophoresis apparatus. System has potential applicability to fields of taxonomy, immunology, and genetics. Apparatus is also used for electrofocusing.

Grunbaum, B. W.↗