Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Influence of doping (Ti, V, Zr, W) and annealing on the sp{sup 2} carbon structure of amorphous carbon films

The influence of the transition metal (Ti, V, Zr, W) doping on the carbon matrix nanostructuring during the thin film growth and subsequent annealing is investigated. Pure and metal-doped amorphous carbon films (a-C, a-C:Me) were deposited at room temperature by nonreactive magnetron sputtering. The carbon structure of as-deposited and postannealed (up to 1300 K) samples was analyzed by x-ray diffraction (XRD) and Raman spectroscopy. The existence of graphenelike regions in a-C is concluded from a (10) diffraction peak. A comparison of the XRD and Raman results suggests that XRD probes only the small amount of 2-3 nm large graphenelike regions, whereas the majority of the sp{sup 2} phase is present in smaller distorted aromatic clusters which are probed only by Raman spectroscopy. Annealing leads to an increase in the graphene size and the aromatic cluster size. During the carbon film growth the addition of metals enhances ordering of sp{sup 2} carbon in sixfold aromatic clusters compared to a-C; Ti, and Zr showing the strongest effect, W the lowest. This order qualitatively corresponds with the catalytic activity of the respective carbides found during graphitization of carbide-doped graphites published in the literature. With annealing, carbide crystallite formation and growth occurs in a-C:Me films, which destroys the initial carbon structure, reduces the size of the initially formed aromatic clusters and the differences in carbon structure introduced by different dopants. For high annealing temperatures the carbon structure of a-C:Me films is similar to that of a-C, and is determined only by the annealing temperature.

36 MATERIALS SCIENCE↗

The effect of the sputtering gas (Ar, Xe) on FePt clusters formation: structural and magnetic properties

It will be reported about the effect of the sputtering gases, Ar and Xe, on FePt clusters formation by magnetron sputtering deposition at high working pressures. All layers, with bulk equivalent thicknesses between 3 to 5 nm, were realized at RT by a sequential layer by layer deposition or a co-deposition of Fe and Pt. After rapid thermal annealing at 500 deg. C, the highest L1{sub 0} fraction was found using Xe as sputtering gas: Xe decreases the transformation activation energy and therefore, reduces the critical thickness necessary to obtain the high anistropic ferromagnetic phase. Ar assisted growths lead to FePt clusters in the L1{sub 0} phase only if the sequential layer deposition is used, whereas for Xe no differences in the deposition techniques were observed.

36 MATERIALS SCIENCE↗

Effect of residual stress on the ferroelectric property of (Pb{sub 0.90}La{sub 0.10})Ti{sub 0.975}O{sub 3} thin films

Highly (001)-, (100)-, (101)-, and (110)-oriented (Pb{sub 0.90}La{sub 0.10})Ti{sub 0.975}O{sub 3} (PLT) thin films were deposited on the LaNiO{sub 3}(001)/Pt(111)/Ti/SiO{sub 2}/Si(100), LaNiO{sub 3}/SiO{sub 2}/Si(100), PbTiO{sub 3}/Pt(111)/Ti/SiO{sub 2}/Si(100), and LaNiO{sub 3}(110)/Pt(111)/Ti/SiO{sub 2}/Si(100) substrates by rf magnetron sputtering. The orientation dependence of ferroelectric properties of the PLT films was investigated. The result shows that the (001)-oriented PLT thin films exhibit enhanced ferroelectric properties (2P{sub r}=61.1 {mu}C/cm{sup 2} and 2E{sub c}=179 kV/cm). The residual stress of the PLT thin films with different orientations was measured by x-ray diffraction (sin{sup 2} {psi} method) for illuminating the related physical mechanisms. The result shows that the enhanced ferroelectric properties of (001)-oriented PLT thin films should be attributed to low residual stress.

36 MATERIALS SCIENCE↗

Fe-Al interface intermixing and the role of Ti, V, and Zr as a stabilizing interlayer at the interface

Fe-Al bilayer interfaces with and without interface stabilizing layers (Ti, V or Zr) were fabricated using dc magnetron sputtering. Intermixing layer thickness and the effectiveness of the stabilizing layer (Ti, V, Zr) at the interface were studied using Rutherford backscattering spectrometry (RBS) and X-ray reflectometry (XRR). The result for the intermixing thickness of the AlFe layer is always larger when Fe is deposited on Al as compared to when Al is deposited on Fe. By comparing measurements with computer simulations, the thicknesses of the AlFe layers were determined to be 20.6 Å and 41.1 Å for Al/Fe and Fe/Al bilayer systems, respectively. The introduction of Ti and V stabilizing layers at the Fe-Al interface reduced the amount of intermixing between Al and Fe, consistent with the predictions of model calculations. The Zr interlayer, however, was ineffective in stabilizing the Fe-Al interface in spite of the chemical similarities between Ti and Zr. In addition, analysis suggests that the Ti interlayer is not effective in stabilizing the Fe-Al interface when the Ti interlayer is extremely thin (~3 Å) for these sputtered metallic films.

36 MATERIALS SCIENCE↗

Zinc oxide nanolevel surface transformation for liquid crystal orientation by ion bombardment

This paper introduces the characteristics of the zinc oxide (ZnO) inorganic film deposited by radio-frequency magnetron sputtering as an alternative alignment layer for liquid crystal display (LCD) applications. The crystalline structure related to the texture formation of ZnO (1013) was observed with a tilt angle of approximately 28.1 deg. to the ZnO (0001) plane, leading to a smooth surface and high-density structure. Ion beam (IB) bombardment at various incident angles was used to induce liquid crystal (LC) alignment and cause the measured pretilt angle on ZnO films to assume a triangular contour. The orientation order of liquid crystal molecules was due to the van der Waals force for the vertical alignment of LCs with selective breaking of O-Zn bonds by IB bombardment. The contact angle contour as a function of the IB incident angle resembled the behavior of the pretilt angle. The pretilt angle is controllable by adjusting the surface features on ZnO films with IB bombardment. The electro-optic characteristics of vertically aligned (VA)-LCD based on ZnO film were comparable to those of VA-LCD based on polyimide, showing good potential of ZnO film as a LC alignment layer.

36 MATERIALS SCIENCE↗

Electrical properties of epitaxial SrTiO{sub 3} tunnel barriers on (001) Pt/SrTiO{sub 3} substrates

Coherent, epitaxial Pt films with root-mean-square surface roughness values of less than one unit cell were grown on (001) SrTiO{sub 3} substrates by dc sputtering. These Pt films served as bottom electrodes for epitaxial SrTiO{sub 3} tunnel barriers grown by rf magnetron sputtering. The SrTiO{sub 3} barriers were free of pinholes and showed mean surface roughness values of less than one unit cell. Barriers with a thickness of 4.5 nm showed excellent insulating properties and nonlinear current-voltage characteristics. At high bias fields, a reproducible hysteresis and deviation from the ideal tunneling behavior were observed.

36 MATERIALS SCIENCE↗

Resputtering of zinc oxide films prepared by radical assisted sputtering

Sputtering losses of zinc oxide films prepared by radical assisted sputtering were studied. It was found that the sputtering loss can be very severe in oxygenous sputtering processes of zinc oxide films. In general, resputtering caused by negative oxygen ions dominates the sputtering loss, while diffuse deposition plays a minor role. Resputtering is strongly correlated with the sputtering threshold energy of the deposited films and the concentration of O{sup -} in the sputtering zone. The balance between the oxygen concentration in the sputtering zone and the oxidation degree of the growing films depends on the sputtering rate. Our research suggests that a lower oxygen concentration in the sputtering zone and a higher oxidation degree of the growing films are favorable for reducing the resputtering losses. The sputtering loss mechanisms discussed in this work are also helpful for understanding the deposition processes of other magnetron sputtering systems.

36 MATERIALS SCIENCE↗

Preparation and Characterization of Ti-Zr-V Non-Evaporable Getter Films to Be Used in Ultra-High Vacuum

An appealing procedure to obtain operating pressures in the 10{sup -8} Pa range, which is necessary for the insertion devices elements of synchrotron sources, is to coat the inner ultra-high vacuum chamber walls with a thin film of non-evaporable getter (NEG) metals. Titanium, zirconium, vanadium, and their alloys are used as NEG materials due to their low activation temperature, high chemical activity, large solubility, and high diffusivity for gases. In this work, magnetron sputtering was employed to deposit thin films of Ti-Zr-V on a Si(111) substrate. The morphological, structural, and chemical analyses were carried out by atomic force microscopy (AFM), scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS)

36 MATERIALS SCIENCE↗

Strong plasmon absorption in InN thin films

We have fabricated InN thin films using rf magnetron sputtering from an indium (In) metal target. Optical and electrical measurements show that these as-grown films are n-type with carrier concentrations ranging from 10{sup 20} to 10{sup 21} cm{sup -3}. This variation in carrier density is produced by controlling the conditions during the deposition. We used Rutherford backscattering spectrometry to identify possible sources for n-type carriers. We found that in addition to strong direct bandgap optical absorption ranging from 1.4 to 2.0 eV, a large plasmon absorption peak in the infrared region (0.45-0.8 eV) is also observed. This tunable IR absorption suggests that these highly degenerate InN films could be used for a number of applications, including optical filters and infrared devices.

36 MATERIALS SCIENCE↗

Thermal transport properties of polycrystalline tin-doped indium oxide films

Thermal diffusivity of polycrystalline tin-doped indium oxide (ITO) films with a thickness of 200 nm has been characterized quantitatively by subnanosecond laser pulse irradiation and thermoreflectance measurement. ITO films sandwiched by molybdenum (Mo) films were prepared on a fused silica substrate by dc magnetron sputtering using an oxide ceramic ITO target (90 wt %In{sub 2}O{sub 3} and 10 wt %SnO{sub 2}). The resistivity and carrier density of the ITO films ranged from 2.9x10{sup -4} to 3.2x10{sup -3} {omega} cm and from 1.9x10{sup 20} to 1.2x10{sup 21} cm{sup -3}, respectively. The thermal diffusivity of the ITO films was (1.5-2.2)x10{sup -6} m{sup 2}/s, depending on the electrical conductivity. The thermal conductivity carried by free electrons was estimated using the Wiedemann-Franz law. The phonon contribution to the heat transfer in ITO films with various resistivities was found to be almost constant ({lambda}{sub ph}=3.95 W/m K), which was about twice that for amorphous indium zinc oxide films.

36 MATERIALS SCIENCE↗

Epitaxial Mn{sub 2.5}Ga thin films with giant perpendicular magnetic anisotropy for spintronic devices

We report on epitaxial growth and magnetic properties of Mn{sub 2.5}Ga thin films, which were deposited on Cr/MgO single crystal substrates by magnetron sputtering. X-ray diffraction results revealed the epitaxial relationships as Mn{sub 2.5}Ga(001)[100] parallel Cr(001)[110] parallel MgO(001)[100]. The presence of (002) and (011) superlattice peaks indicates that the films were crystallized into DO{sub 22} ordered structures. The perpendicular magnetic anisotropy (PMA) properties were found to be related to the extent of DO{sub 22} chemical ordering. A giant PMA (K{sub u}{sup eff}=1.2x10{sup 7} erg/cm{sup 3}) and low saturation magnetization (M{sub s}=250 emu/cm{sup 3}) can be obtained for the film with highest chemical ordering parameter (S=0.8)

36 MATERIALS SCIENCE↗

Enhancement of conductivity and transmittance of ZnO films by post hydrogen plasma treatment

We studied the effects of hydrogen plasma treatment on the electrical and optical properties of ZnO films deposited by radio frequency magnetron sputtering. It is found that the ZnO:H film is highly transparent with the average transmittance of 92% in the visible range. Both carrier concentration and mobility are increased after hydrogen plasma treatment, correspondingly, the resistivity of the ZnO:H films achieves the order of 10{sup -3} OMEGA cm. We suggest that the incorporated hydrogen not only passivates most of the defects and/or acceptors present, but also introduces shallow donor states such as the V{sub O}-H complex and the interstitial hydrogen H{sub i}. Moreover, the annealing data indicate that H{sub i} is unstable in ZnO, while the V{sub O}-H complex remains stable on the whole at 400 deg. C, and the latter diffuses out when the annealing temperature increases to 500 deg. C. These results make ZnO:H more attractive for future applications as transparent conducting electrodes.

36 MATERIALS SCIENCE↗

Residual stress and magnetic behavior of multiferroic CoFe{sub 2}O{sub 4}/Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} thin films

Multiferroic composite thin films consisting of CoFe{sub 2}O{sub 4} (CFO) and Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) layers were deposited through a combined route of rf magnetron sputtering and sol gel on Pt(111)/TiO{sub 2}/SiO{sub 2}/Si substrates. The coupling effects in the bilayered thin film were studied by looking at the relationships among the crystallite orientation, magnetic behavior, and the in-plane residual stress. Phase selective residual stress analysis conducted by using x-ray method demonstrated a close correlation between the stress imposed on the PZT layer and its texture. A change in the PZT layer orientation from (111) to (010) with the increasing layer thickness was observed in the multiferroic thin film as the system changes from an interface energy minimizing texture to a strain energy density minimizing texture. The CFO phase in the multiferroic thin films was preferably oriented in the (111) orientation. However, there is a change in magnetization as well as coercivity of the multiferroic thin films when the top PZT layer was varied in thickness. A close correlation between the magnetization and the in-plane stress in the CFO bottom layer imposed by the PZT film thickness was observed.

36 MATERIALS SCIENCE↗

Ultraviolet-light-emitting AlN:Gd thin-film electroluminescence device using an energy transfer from Gd{sup 3+} ions to N{sub 2} molecules

An ultraviolet (UV)-light-emitting AlN:Gd thin-film electroluminescence device (TFELD) was demonstrated for application to flat-panel lighting. AlN:Gd thin films were deposited by rf magnetron sputtering at 200 deg. C and applied to an ac-voltage-driven TFELD with a double-insulating structure as an emission layer. UV-light emission was observed over a threshold voltage of 270 V for a 5 kHz sinusoidal ac voltage. Electroluminescence (EL) spectra were compared with photoluminescence and cathodoluminescence spectra of AlN:Gd originating from Gd{sup 3+} {sup 6}P{sub j}->{sup 8}S{sub 7/2} transitions and with an emission spectrum of the second positive system (C{sup 3}PI{sub u}->B{sup 3}PI{sub g}) of N{sub 2} molecules. As a result, an energy transfer from Gd{sup 3+} {sup 6}P{sub j}->{sup 8}S{sub 7/2} to N{sub 2}C{sup 3}PI{sub u}->B{sup 3}PI{sub g} is discussed as a likely mechanism for the UV EL. Finally, a preliminary result, associated with the conversion from UV light into blue-green light via a phosphor, is demonstrated for the color tunability of the TFELD.

36 MATERIALS SCIENCE↗

Effect of elemental composition and size on electron confinement in self-assembled SiC quantum dots: A combinatorial approach

A high level of control over quantum dot (QD) properties such as size and composition during fabrication is required to precisely tune the eventual electronic properties of the QD. Nanoscale synthesis efforts and theoretical studies of electronic properties are traditionally treated quite separately. In this paper, a combinatorial approach has been taken to relate the process synthesis parameters and the electron confinement properties of the QDs. First, hybrid numerical calculations with different influx parameters for Si{sub 1-x}C{sub x} QDs were carried out to simulate the changes in carbon content x and size. Second, the ionization energy theory was applied to understand the electronic properties of Si{sub 1-x}C{sub x} QDs. Third, stoichiometric (x=0.5) silicon carbide QDs were grown by means of inductively coupled plasma-assisted rf magnetron sputtering. Finally, the effect of QD size and elemental composition were then incorporated in the ionization energy theory to explain the evolution of the Si{sub 1-x}C{sub x} photoluminescence spectra. These results are important for the development of deterministic synthesis approaches of self-assembled nanoscale quantum confinement structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic and structural properties of molybdenum thin films as determined by real-time spectroscopic ellipsometry

Real-time spectroscopic ellipsometry (RTSE) is shown to be an effective contactless probe of radio frequency magnetron sputtered molybdenum thin films used as the back electrode in chalcopyrite [Cu(In,Ga)Se{sub 2}] solar cells. A series of Mo thin films was sputtered onto soda-lime glass substrates at Ar pressures ranging from 4 to 20 mTorr. RTSE measurements reveal how Ar pressure affects the nucleation and growth mechanisms that influence the films' ultimate grain structure and properties. Determinations of the free electron relaxation times at optical frequencies reveal that higher pressures lead to a smaller average grain size and increased void volume fraction.

36 MATERIALS SCIENCE↗

Photoinduced current transient spectroscopy technique applied to the study of point defects in polycrystalline CdS thin films

CdS thin films of variable thickness (between 160 and 1200 nm) were prepared using rf magnetron sputtering. X-ray diffraction measurements showed that the films have hexagonal structure and that the crystallites are preferentially oriented with the <002> axis perpendicular to the substrate surface. The results of electrical conductivity measurements as a function of film thickness and of temperature provide evidence that the conductivity is controlled by a thermally activated mobility in the presence of an intergrain barrier. The room temperature barrier height phi decreases with the increase in film thickness. Values of phi between 0 and 0.25 eV were determined. Photoinduced current transient spectroscopy performed on five samples having different thicknesses showed the presence of 11 traps with activation energies in the range 0.08-1.06 eV; deeper traps being observed on thinner films. By comparison with literature results, seven traps are attributed to native defects and foreign impurities (mainly Cu, Au, and Ag). Four other traps, not previously observed, are attributed to residual defects. The observation that deeper traps are detected in samples with larger barrier heights has been discussed and interpreted in terms of the energy band profile near the grain boundary.

36 MATERIALS SCIENCE↗

Radiation damage to amorphous carbon thin films irradiated by multiple 46.9 nm laser shots below the single-shot damage threshold

High-surface-quality amorphous carbon (a-C) optical coatings with a thickness of 45 nm, deposited by magnetron sputtering on a silicon substrate, were irradiated by the focused beam of capillary-discharge Ne-like Ar extreme ultraviolet laser (CDL=capillary-discharge laser; XUV=extreme ultraviolet, i.e., wavelengths below 100 nm). The laser wavelength and pulse duration were 46.9 nm and 1.7 ns, respectively. The laser beam was focused onto the sample surface by a spherical Sc/Si multilayer mirror with a total reflectivity of about 30%. The laser pulse energy was varied from 0.4 to 40 muJ on the sample surface. The irradiation was carried out at five fluence levels between 0.1 and 10 J/cm{sup 2}, accumulating five different series of shots, i.e., 1, 5, 10, 20, and 40. The damage to the a-C thin layer was investigated by atomic force microscopy (AFM) and Nomarski differential interference contrast (DIC) optical microscopy. The dependence of the single-shot-damaged area on pulse energy makes it possible to determine a beam spot diameter in the focus. Its value was found to be equal to 23.3+-3.0 mum using AFM data, assuming the beam to have a Gaussian profile. Such a plot can also be used for a determination of single-shot damage threshold in a-C. A single-shot threshold value of 1.1 J/cm{sup 2} was found. Investigating the consequences of the multiple-shot exposure, it has been found that an accumulation of 10, 20, and 40 shots at a fluence of 0.5 J/cm{sup 2}, i.e., below the single-shot damage threshold, causes irreversible changes of thin a-C layers, which can be registered by both the AFM and the DIC microscopy. In the center of the damaged area, AFM shows a-C removal to a maximum depth of 0.3, 1.2, and 1.5 nm for 10-, 20- and 40-shot exposure, respectively. Raman microprobe analysis does not indicate any change in the structure of the remaining a-C material. The erosive behavior reported here contrasts with the material expansion observed earlier [L. Juha et al., Proc. SPIE 5917, 91 (2005)] on an a-C sample irradiated by a large number of femtosecond pulses of XUV high-order harmonics.

36 MATERIALS SCIENCE↗