Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FIELD CONFIGURATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

TH-AB-BRA-11: Using 3D Dosimeters for the Investigation of the Electron Return Effect (ERE) in MR-Guided Radiation Therapy: A Feasibility Study

Purpose: To demonstrate the capability of 3D radiochromic PRESAGE and Fricke-type dosimeters to measure the influence of magnetic fields on dose distribution, including the electron return effect (ERE), for MR-guided radiation therapy applications. Methods: Short cylindrical 3D dosimeters with PRESAGE and Fricke-type formulations were created in-house prior to irradiations in a 1.5T/7MV MR-linac. Each dosimeter was prepared with a concentric cylindrical air cavity with diameters of 1.5 cm and 2.5 cm, and the diameters of the dosimeters were 7.2 cm and 8.8 cm for PRESAGE and Fricke-type respectively. The dosimeters were irradiated within the bore of the MR-linac with the flat face of the dosimeters perpendicular to the magnetic field. Dosimeters were irradiated to approximately 9 Gy and 29 Gy to the center of dosimeters with a 15×15 cm{sup 2} field. The PRESAGE dosimeter was scanned using an optical-CT 2 hours post-irradiation; the Fricke-type dosimeter was immediately imaged with the MR component of the MR-linac post-irradiation. Results: Axial slices of the dose distributions show a clear demonstration of the dose enhancement due to the ERE above the cavity and the region of reduced dose below the cavity. The regions of increased and reduced dose are rotated with respect to the radiation beam axis due to the average directional change of the electrons. Measurements from line profiles show the dose enhanced up to ∼0.5 cm around the cavity by up to a factor of 1.3 and 1.4 for PRESAGE and Fricke-type dosimeters respectively. Conclusion: PRESAGE and Fricke-type dosimeters are able to qualitatively measure the ERE with good agreement with previously published simulation and 2D dosimetry demonstrations of the ERE. Further investigation of these 3D dosimeters as promising candidates for quality assurance of MR-guided radiation therapy systems is encouraged to assess changes in response and measurement accuracy due to the magnetic field.

60 APPLIED LIFE SCIENCES↗

Magnetic and magnetocaloric properties of Gd 1 - x Y x 2 NiSi 3 compounds (x = 0.25, 0.5, 0.75)

Here, we report the magnetic dilution effect on the magnetic and magnetocaloric properties of Gd 1 - x Y x 2 NiSi 3 (x = 0.25, 0.5, 0.75) compounds by partial substitution of Y ions in Gd 2 NiSi 3 . The X-ray diffraction studies indicate all theses compounds form in AlB 2 type hexagonal crystal structure. The dc magnetic measurements reveal the compounds undergo antiferromagnetic like phase transition below 11.5, 7.2, and 3.1 K for x = 0.25, 0.5 and 0.75 compositions, respectively. The magnetic ground state of the compounds becoming increasingly fragile with the increase in Y concentration, and results in magnetic field induced ferromagnetic transition. Such change in magnetic spin configuration is responsible for moderately large magnetic entropy change (ΔS M ~ 19.3 J/kg-K, 14.8 J/kg-K and 9.8 J/kg-K for (x = 0.25, 0.5, 0.75), respectively, for ΔH = 7T) in the cryogenic temperature region. The relative cooling power (RCP) has also been measured for all the compounds that appears to be modest (~503 J/kg for 7T magnetic field change) for x = 0.25 analogue and reduces further with magnetic dilution effect caused by Y substitution.

36 MATERIALS SCIENCE↗

CDAW 9 analysis of magnetospheric events on May 3, 1986 - Event C

An intense geomagnetic substorm event on May 3, 1986, occurring toward the end of a strong storm period, is studied. The auroral electrojet indices and global imaging data from both the Northern and Southern Hemispheres clearly revealed the growth phase and expansion phase development for a substorm with an onset at 0111 UT. An ideally located constellation of four spacecraft allowed detailed observation of the substorm growth phase in the near-tail region. A realistic time-evolving magnetic field model provided a global representation of the field configuration throughout the growth and early expansion phase of the substorm. Evidence of a narrowly localized substorm onset region in the near-earth tail is found. This region spread rapidly eastward and poleward after the 0111 UT onset. The results are consistent with a model of late growth phase formation of a magnetic neutral line. This reconnection region caused plasma sheet current diversion before the substorm onset and eventually led to cross-tail current disruption at the time of the substorm onset.

Baker, D. N.↗

Extended MHD modeling of tearing-driven magnetic relaxation

Discrete relaxation events in reversed-field pinch relevant configurations are investigated numerically with nonlinear extended magnetohydrodynamic modeling, including the Hall term in Ohm’s law and first-order ion finite Larmor radius effects. Our results show variability among relaxation events, where the Hall dynamo effect may help or impede the MHD dynamo effect in relaxing the parallel current density profile. The competitive behavior arises from multi-helicity conditions where the dominant magnetic fluctuation is relatively small. The resulting changes in parallel current density and parallel flow are aligned in the core, consistent with experimental observations. Analysis of simulation results also confirms that force density from fluctuation-induced Reynolds stress arises subsequent to the drive from fluctuation-induced Lorentz force density. Transport of momentum density is found to be dominated by the fluctuation-induced Maxwell stress over most of the cross section with viscous and gyroviscous contributions being large in the edge region. The findings resolve a discrepancy with respect to the relative orientation of current density and flow relaxation, which had not been realized or investigated in Ref. [King et. al. Phys. Plasmas 19, 055905 (2012)], where only the magnitude of flow relaxation is actually consistent with experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of Small Multiaperture Negative Ion Beam Sources and Related Simulation Tools

In the design of extraction systems for negative ion sources several fundamental questions still deserve further investigation, as the distribution of particles near the extraction sheath, the optimal magnetic structure and the space charge compensation length after acceleration. Large (and undesired) deflection differences may develop between beamlets of a multiaperture source, so that equalization of the magnetic field effect is necessary. To guarantee an uniform strength of filter field at extraction and in the acceleration, several configuration of arrays of permanent magnets were studied and fast simulation tools were developed. As an example of optimized magnetic configuration and as a possible experimental tool, the design of NIO1 (Negative Ion Optimization try 1) is here discussed. This project consists of a 3x3 matrix of 8 mm extraction holes, aimed at a total H{sup -} current about 130 mA with an extraction voltage V{sub s} = -60 kV. A modular design is used, so several parts (the extraction grid, the acceleration grid, the filter assembly, the source multipoles) can be rotated by 90 degrees for versatility. Space charge compensation was included into a two dimensional self consistent code for negative beams, here used for NIO1 simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effects of magnetic nozzle configurations on plasma thrusters

Magnetoplasmadynamics (MPD) arc devices have been operated at power levels from 10 KW to 0.1 MW. When these devices have magnetic fields applied to them, they show marked increases in thrust in direct proportion to the magnitide of the applied field. Electrode erosion may be influenced by applied fields. This proposal will study the application of variable magnetic fields over a range of thruster powers, gas densities, and thruster configurations. It is proposed to examine this behavior with numerical codes and limited but relevant experimental tests.

York, Thomas M.↗

Manipulating topological states by imprinting non-collinear spin textures

Topological magnetic states, such as chiral skyrmions, are of great scientific interest and show huge potential for novel spintronics applications, provided their topological charges can be fully controlled. So far skyrmionic textures have been observed in noncentrosymmetric crystalline materials with low symmetry and at low temperatures. We propose theoretically and demonstrate experimentally the design of spin textures with topological charge densities that can be tailored at ambient temperatures. Tuning the interlayer coupling in vertically stacked nanopatterned magnetic heterostructures, such as a model system of a Co/Pd multilayer coupled to Permalloy, the in-plane non-collinear spin texture of one layer can be imprinted into the out-of-plane magnetised material. We observe distinct spin textures, e.g. vortices, magnetic swirls with tunable opening angle, donut states and skyrmion core configurations. We show that applying a small magnetic field, a reliable switching between topologically distinct textures can be achieved at remanence

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energetic electron acceleration during multi-island coalescence

The mechanisms for the production of relativistic electrons associated with the coalescence/reconnection of multiple magnetic islands are investigated using two-dimensional particle-in-cell simulations for the case where the initial island half width L is comparable to the ion inertia length. Configurations without and with a uniform magnetic guide field are considered. Significant energization occurs only when the number of islands is reduced to 2 or 3 with wavelength satisfying k{sub x}L(less-or-similar sign)0.2. The energization proceeds in two distinct stages. In the first stage, a small number of electrons are accelerated to relativistic energies at the X-line by the inductive electric field, corresponding to perpendicular acceleration in the absence of the guide field and parallel/anti-parallel acceleration with a guide field. The second stage is associated with the final coalescence into one large island and produces a considerably larger number of relativistic electrons. With a guide field, this stage is dominated by the formation of elongated density cavities along one pair of separatrices and continued direct acceleration at the X-line. Without the guide field, the direct X-line acceleration becomes unimportant, and the acceleration is localized in the flux pile-up regions and results from the curvature drift interacting with the localized inductive electric field. Typically, some 15%-20% of the decrease in magnetic field energy is transferred to the electrons, with a few percent appearing in relativistic (E/m{sub e}c{sup 2}>0.3) electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phase-coherence and symmetry in four-terminal magnetotransport measurements on InN nanowires

Universal conductance fluctuations in n-type doped InN nanowires are investigated at temperatures down to 0.35 K. The nanowires were grown by molecular beam epitaxy. The effect of the contact resistance is eliminated by performing the measurements in a four-terminal configuration. We find that the decrease in the conductance fluctuation amplitude with temperature is due to small energy transfer phase-breaking processes and thermal broadening. In contrast to measurements in a two-terminal configuration, the symmetry of the conductance under magnetic field reversal is lost.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electron cyclotron resonance ion source plasma characterization by X-ray spectroscopy and X-ray imaging

An experimental campaign aiming to investigate electron cyclotron resonance (ECR) plasma X-ray emission has been recently carried out at the ECRISs—Electron Cyclotron Resonance Ion Sources laboratory of Atomki based on a collaboration between the Debrecen and Catania ECR teams. In a first series, the X-ray spectroscopy was performed through silicon drift detectors and high purity germanium detectors, characterizing the volumetric plasma emission. The on-purpose developed collimation system was suitable for direct plasma density evaluation, performed “on-line” during beam extraction and charge state distribution characterization. A campaign for correlating the plasma density and temperature with the output charge states and the beam intensity for different pumping wave frequencies, different magnetic field profiles, and single-gas/gas-mixing configurations was carried out. The results reveal a surprisingly very good agreement between warm-electron density fluctuations, output beam currents, and the calculated electromagnetic modal density of the plasma chamber. A charge-coupled device camera coupled to a small pin-hole allowing X-ray imaging was installed and numerous X-ray photos were taken in order to study the peculiarities of the ECRIS plasma structure.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hopfions, heliknotons, skyrmions, torons and both abelian and nonabelian vortices in chiral liquid crystals

Widely known for their uses in displays and electro-optics, liquid crystals are more than just technological marvels. They vividly reveal the topology and structure of various solitonic and singular field configurations, often markedly resembling the ones arising in many field theories and in the areas ranging from particle physics to optics, hard condensed matter and cosmology. In this review, we focus on chiral nematic liquid crystals to show how these experimentally highly accessible systems provide valuable insights into the structure and behavior of fractional, full, and multi-integer two-dimensional skyrmions, dislocations and both abelian and non-abelian defect lines, as well as various three-dimensionally localized, often knotted structures that include hopfions, heliknotons, torons and twistions. Finally, we provide comparisons of some of these field configurations with their topological counterparts in chiral magnets, discussing close analogies between these two condensed matter systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Implementation of the 3D edge plasma code EMC3-EIRENE on NSTX

The 3D edge transport code EMC3-EIRENE has been applied for the first time to the NSTX spherical tokamak. A new disconnected double null grid has been developed to allow the simulation of plasma where the radial separation of the inner and outer separatrix is less than characteristic widths (e.g. heat flux width) at the midplane. Modelling results are presented for both an axisymmetric case and a case where 3D magnetic field is applied in an n = 3 configuration. In the vacuum approximation, the perturbed field consists of a wide region of destroyed flux surfaces and helical lobes which are a mixture of long and short connection length field lines formed by the separatrix manifolds. This structure is reflected in coupled 3D plasma fluid (EMC3) and kinetic neutral particle (EIRENE) simulations. The helical lobes extending inside of the unperturbed separatrix are filled in by hot plasma from the core. The intersection of the lobes with the divertor results in a striated flux footprint pattern on the target plates. As a result, profiles of divertor heat and particle fluxes are compared with experimental data, and possible sources of discrepancy are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Azimuthal and axial structures in 3D particle-in-cell simulation of Penning discharge

We report the results of a 3D particle-in-cell simulation of cylindrical Penning discharge with the axial magnetic field in the so-called reflex configuration, where the cathode and anti-cathode are biased to the same negative potential. The discharge is supported by thermal electron emission from the cathode. Electron and ion collisions, including ionization, are fully accounted for. The emphasis is on a specific regime in which the plasma potential at the center of the discharge is positive with respect to the chamber walls, serving as an anode. Spatial and temporal scales of the observed azimuthal and axial fluctuations and structures are characterized. It is suggested that azimuthal structures are caused by the dissipative gradient-drift instability. We find that the axial fluctuations related to the plasma-beam instabilities are weakly correlated with the azimuthal perturbations of the density, so that the azimuthal modes rotate as a whole and do not show any axial shear. The behavior of the electric potential is more involved, demonstrating intermittent standing wave and propagating structures in the axial direction that modulate the electron transport, producing the standing wave pattern (along the z-direction) in the radial electron flux.

3D PIC simulation of discharge↗

The dependence of divertor power sharing on magnetic flux balance in near double-null configurations on Alcator C-Mod

We report management of power exhaust will be a crucial task for tokamak fusion reactors. Reactor concepts are often proposed with double-null divertors, i.e. having two magnetic separatrices in an up-down symmetric configuration. This arrangement is potentially advantageous since the majority of the tokamak exhaust power tends to flow to the outer pair of divertor legs at large major radius, where the geometry is favorable for spreading the heat over a large surface area and there is more room for advanced divertor configurations. Despite the importance, there have been relatively few studies of divertor power sharing in near double null configurations and no studies at the poloidal magnetic fields and scrape-off layer power widths anticipated for a reactor. Motivated by this need we have undertaken a systematic study on Alcator C-Mod, examining the effect of magnetic flux balance on the power sharing among the four divertor legs in near double-null plasmas. Ohmic L-modes at three values of plasma current and ICRF-heated enhanced D-alpha (EDA) H-modes and I-modes at a single value of plasma current are explored, producing poloidal magnetic fields of 0.42, 0.62 and 0.85 Tesla. For Ohmic L-modes and ICRF-heated EDA H-modes, we find that the point of equal power sharing between upper and lower divertors occurs remarkably close to a balanced double null. Power sharing amongst the outer (upper versus lower) and inner (upper versus lower) pairs of divertors can be described in terms of a logistic function of magnetic flux balance, consistent with heat flux mapping along magnetic field lines to the outer midplane. Power sharing between inner and outer legs is found to follow a Gaussian-like function of magnetic flux balance with non-zero power to the inner divertors at double null. The overall behavior of H-modes operated near double null and for I-modes operating to within one heat flux e-folding of double null are found similar to Ohmic L-modes, with a significant reduction of power on the inner divertor legs. The results are encapsulated in terms of empirically-informed analytic functions of magnetic flux balance. When combined with magnetic equilibrium control system specifications, these relationships can be used to specify the power flux handling requirements for each of the four divertor target plates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Valley filtering in strain-induced α-$\mathcal{T}_3$ quantum dots

We test the valley filtering capabilities of a quantum dot inscribed by locally straining an α-$\mathcal{T}_3$ lattice. Specifically, we consider an out-of-plane Gaussian bump in the center of a four-terminal configuration and calculate the generated pseudo-magnetic field having opposite direction for electrons originating from different valleys, the resulting valley-polarized currents, and the conductance between the injector and collector situated opposite one another. Depending on the quantum dot’s width and width-to-height ratio, we detect different transport regimes with and without valley filtering for both the α-$\mathcal{T}_3$ and Dice lattice structures. In addition, we analyze the essence of the conductance resonances with high valley polarization in terms of related (pseudo) Landau levels, the spatial distribution of the local density of states and the local current densities. The observed local charge and current density patterns reflect the local inversion symmetry-breaking by the strain, besides the global inversion symmetry breaking due to the scaling parameter α. By this way we can also filter out different sublattices

36 MATERIALS SCIENCE↗

Modeling of the parametric dependence of the edge toroidal rotation

Modeling of the edge toroidal rotation and its dependence on the edge plasma parameters is performed by means of the B2SOPS5.0 transport code for ohmic shots both for MAST and ASDEX Upgrade configurations. The impact of plasma current, toroidal magnetic field, plasma density, and temperature is investigated. The connection between the toroidal rotation and edge radial electric field is also studied. The results of the simulation are consistent with the parametric dependence predicted analytically.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

LANSCE CCL Performance Limits

This report summarizes the performance limits of the LANSCE Coupled-Cavity Linac (CCL). These results are captured or summarized directly from the references cited. This report was written in support of the LANSCE Modernization Project (LAMP). Many factors contribute to the performance limits of the CCL accelerator system. One performance limit is set by the CCL mechanical structure and available cooling. Heating of the structure is ultimately linked to the operating RF duty factor of the CCL. Another performance limit is set by the maximum RF and beam duty factors that can be supported by the 805-MHz klystrons and associated HVDC power supplies. The RF and HVDC systems also set limits for the maximum peak beam current that can be accelerated in the CCL. And finally, a maximum beam current limit is set by the beam dynamics determined by the details of the CCL physics design (number of cells per CCL tank, accelerating gradients, magnetic focusing lattice, beam losses, etc.). This limit can be informed by both simulation results and beam measurement data, if available. A detailed explanation of each performance limit is given in the sections below. The results are summarized in the table below. In all cases, it is assumed that the CCL and the RF system are operating in their nominal beam production configuration – nominal magnet set points and nominal cavity fields, unless otherwise specified.

43 PARTICLE ACCELERATORS↗

The dependence of divertor power sharing on magnetic flux balance in near double-null configurations on Alcator C-Mod

Management of power exhaust will be a crucial task for tokamak fusion reactors. Reactor concepts are often proposed with double-null divertors, i.e. having two magnetic separatrices in an up-down symmetric configuration. This arrangement is potentially advantageous since the majority of the tokamak exhaust power tends to flow to the outer pair of divertor legs at large major radius, where the geometry is favorable for spreading the heat over a large surface area and there is more room for advanced divertor configurations. Despite the importance, there have been relatively few studies of divertor power sharing in near double null configurations and no studies at the poloidal magnetic fields and scrape-off layer power widths anticipated for a reactor. Motivated by this need we have undertaken a systematic study on Alcator C-Mod, examining the effect of magnetic flux balance on the power sharing among the four divertor legs in near double-null plasmas. Ohmic L-modes at three values of plasma current and ICRF-heated enhanced D-alpha (EDA) H-modes and I-modes at a single value of plasma current are explored, producing poloidal magnetic fields of 0.42, 0.62 and 0.85 Tesla. For Ohmic L-modes and ICRF-heated EDA H-modes, we find that the point of equal power sharing between upper and lower divertors occurs remarkably close to a balanced double null. Power sharing amongst the outer (upper versus lower) and inner (upper versus lower) pairs of divertors can be described in terms of a logistic function of magnetic flux balance, consistent with heat flux mapping along magnetic field lines to the outer midplane. Power sharing between inner and outer legs is found to follow a Gaussian-like function of magnetic flux balance with non-zero power to the inner divertors at double null. The overall behavior of H-modes operated near double null and for I-modes operating to within one heat flux e-folding of double null are found similar to Ohmic L-modes, with a significant reduction of power on the inner divertor legs. The results are encapsulated in terms of empirically-informed analytic functions of magnetic flux balance. When combined with magnetic equilibrium control system specifications, these relationships can be used to specify the power flux handling requirements for each of the four divertor target plates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗