Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Hybridized polymer matrix composites

The extent to which graphite fibers are released from resin matrix composites that are exposed to fire and impact conditions was determined. Laboratory simulations of those conditions that could exist in the event of an aircraft crash and burn situation were evaluated. The effectiveness of various hybridizing concepts in preventing this release of graphite fibers were also evaluated. The baseline (i.e., unhybridized) laminates examined were prepared from commercially available graphite/epoxy, graphite/polyimide, and graphite/phenolic materials. Hybridizing concepts investigated included resin fillers, laminate coatings, resin blending, and mechanical interlocking of the graphite reinforcement. The baseline and hybridized laminates' mechanical properties, before and after isothermal and humidity aging, were also compared. It was found that a small amount of graphite fiber was released from the graphite/epoxy laminates during the burn and impact conditions used in this program. However, the extent to which the fibers were released is not considered a severe enough problem to preclude the use of graphite reinforced composites in civil aircraft structure. It also was found that several hybrid concepts eliminated this fiber release. Isothermal and humidity aging did not appear to alter the fiber release tendencies.

House, E. E.↗

Laser anemometer measurements at the exit of a T63 combustor

In the first practical application of laser anemometry to an actual gas turbine engine combustor, the mean velocity and turbulent intensity profiles were measured in a steady-flow combustion rig across an annulus simulating a turbine inlet; to establish a basis for comparison with similar measurements to be made in an operating engine and to confirm current turbine aerodynamics and heat transfer design assumptions. It was necessary to develop a new experimental technique for traversing the annulus due to differential thermal expansion of the cantilevered combustion rig and a new computer-graphics analysis technique for analyzing the velocity histograms due to the high background light intensity. The axial mean velocity and turbulent intensity were uniform across the annulus under all operating conditions and the flow had little or no swirl component. The isothermal mean velocity was doubled by the burning of fuel, however, the isothermal turbulent intensity was relatively unaffected.

Zimmerman, D. R.↗

Residual fluctuations in the matter and radiation distribution after the decoupling epoch

The residual spectra of matter and radiation fluctuations in the early universe are investigated, and the evolution of primordial adiabatic and isothermal fluctuations through the decoupling epoch is studied. Amplification of adiabatic density fluctuations during decoupling, or velocity 'overshoot', is largely suppressed by Compton drag. Consequently, the amplitude of density fluctuations entering the horizon prior to decoupling is larger than hitherto assumed in the adiabatic theory. Damping of primordial adiabatic density fluctuations by an order of magnitude occurs on mass-scales of 3 x 10 to the 13th solar masses (Omega = 1) or 10 to the 14th solar masses (Omega = 0.2). Comparison of the residual radiation fluctuations with observational limits indicates that the adiabatic theory is only acceptable if re-ionization of the intergalactic medium results in additional scattering of the radiation after decoupling. Primordial isothermal fluctuations are found to yield radiation fluctuations which are insensitive to the assumed spectrum and lie a factor of about 5 below current limits

Silk, J.↗

Laboratory investigations of cloud nuclei from combustion of Space Shuttle propellant

Small quantities of solid rocket motor propellant, of the type to launch the Space Shuttle, were burned at ambient pressure in the laboratory to provide aerosol samples for characterization. A portion of each sample was injected into an isothermal cloud chamber and the remainder into a 770-liter holding tank. Portable ice nucleus (IN) counters, filter devices for IN determinations and a cloud condensation nucleus (CCN) counter sampled from the tank. The measurements show that particles resulting from the combustion of the propellant are active IN (3.3 times 10 to the 8th to 1.5 times 10 to the 11th/g active at 20 C). The portable counters and filters detected significantly fewer IN than the isothermal cloud chamber. The propellant aerosol is a prolific source of CCN that swamped the instrument.

Hindman Ii, E. E.↗

A contribution to the knowledge of HMX decomposition and application of results

The decomposition of cyclotramethylenetetranitramine (HMX) in the solid and liquid phase was studied by isothermal and nonisothermal heating at atmospheric pressure. Decomposition rates of solid HMX changed with sample size and gaseous environment. Kinetic parameters were obtained from weight loss measurements in the temperature range 229 C - 269 C. These tests also yielded highly porous solid residues. Qualitative aspects of solid and liquid phase decomposition of HMX with additives were also investigated in isothermal and nonisothermal tests.

Kraeutle, K. J.↗

Cooling of young neutron stars and the Einstein X-ray observations

Cooling of neutron stars is calculated using an exact stellar evolution code. The full general relativistic version of the stellar structure equations are solved, with the best physical input available. For neutron stars with a stiff equation of state, it is found that the deviation from the isothermality in the interior is significant and that it takes at least a few thousand years to reach the isothermal state. By comparing theoretical and observational results, it is concluded that for Cas A, SN1006, and probably Tycho, standard cooling is inconsistent with the results from the Einstein Observatory, if neutron stars are assumed to be present in these objects. On the other hand, the detection points for RCW103 and the Crab are consistent with these theoretical results.

Nomoto, K.↗

Generalization of low pressure, gas-liquid, metastable sound speed to high pressures

A theory is developed for isentropic metastable sound propagation in high pressure gas-liquid mixtures. Without simplification, it also correctly predicts the minimum speed for low pressure air-water measurements where other authors are forced to postulate isothermal propagation. This is accomplished by a mixture heat capacity ratio which automatically adjusts from its single phase values to approximately the isothermal value of unity needed for the minimum speed. Computations are made for the pure components parahydrogen and nitrogen, with emphasis on the latter. With simplifying assumptions, the theory reduces to a well known approximate formula limited to low pressure.

Bursik, J. W.↗

The diffuse extreme-ultraviolet background - Constraints on hot coronal plasma

The Apollo-Soyuz data and data reported by Cash et al. (1976) have been reanalyzed in terms of both isothermal models and temperature distribution models. In the latter case, a power-law form is assumed for the relation between emission measure and temperature. A new upper limit on diffuse flux in the 20-73 eV band derived from Apollo-Soyuz observations made in the earth's shadow has been incorporated in the calculation. In the considered investigation the results of the new analysis are presented and the implications for the physical properties of the hot component of the interstellar medium are discussed. The analysis of the Berkeley extreme ultraviolet (EUV) diffuse background measurements using either isothermal or power law temperature distribution models for the emitting plasma indicates excellent qualitative agreement with hard X-ray data that suggest the sun to be immersed in a hot plasma that pervades most of space out to approximately 100 pc.

Paresce, F.↗

Degradation Mechanisms in Aluminum Matrix Composites: Alumina/Aluminum and Boron/Aluminum

The effects of fabrication and long term thermal exposure (up to 10,000 hours at 590 K) on two types of aluminum matrix composites were examined. An alumina/aluminum composite, was made of continuous alpha Al2O3 fibers in a matrix of commercially pure aluminum alloyed with 2.8% lithium. The mechanical properties of the material, the effect of isothermal exposure, cyclic thermal exposure, and fatigue are presented. Two degradation mechanisms are identified. One was caused by formation of a nonstoichiometric alumina during fabrication, the other by a loss of lithium to a surface reaction during long term thermal exposure. The other composite, boron/aluminum, made of boron fibers in an aluminum matrix, was investigated using five different aluminum alloys for the matrices. The mechanical properties of each material and the effect of isothermal and cyclic thermal exposure are presented. The effects of each alloy constituent on the degradation mechanisms are discussed. The effects of several reactions between alloy constituents and boron fibers on the composite properties are discussed.

Olsen, G. C.↗

Heat content and evolution of cometary nuclei

The heat flux into cometary nuclei at various distances from the sun, before and after perihelion, is investigated for both the isothermal case and that of the fixed subsolar point. It is found that the heat flux may be a large fraction of the incident total heat input, so that surface temperature and the associated evaporation rate are lower than usually calculated, and that the effect depends on the porosity of the nucleus. An ideal, initially spherical and homogeneous nucleus cannot remain isothermal, so that it must develop surface nonuniformities through localized phase changes, evaporation, and breakaway. The splitting of comets as far as 9 AU from the sun may be explained in terms of the heating of a CO2-rich inclusion in the nucleus.

Smoluchowski, R.↗

Some observations in high pressure rheology of lubricants

Experimental data are presented on viscosity, elastic shear modulus, and limiting shear stress of 12 liquid lubricants. It is shown that transition histories do affect the limiting shear stress of the materials in the form of isothermal compression resulting in a lower density and lower limiting stress than isobaric cooling. The measured limiting shear stress agrees with EHD traction data at slide-to-roll ratios of 0.1 or more. In pressure viscosity measurements of the polymer solutions, it is found that for some temperatures, the pressure viscosity coefficient of the blend is slightly less than that of the base, which results in the crossing of the viscosity-pressure isotherms at high pressures.

Bair, S.↗

A new component of hard X-rays in solar flares

High-resolution (approximately 1 keV FWHM) spectral measurements from 13 to 300 keV of a solar flare hard X-ray burst observed on 1980 June 27 by a balloon-borne array of cooled germanium planar detectors are presented. At energies below about 35 keV, a new component of solar flare hard X-rays is identified. This component is characterized by an extremely steep spectrum which fits closely to that from a Maxwellian electron distribution with a maximum temperature of about 34 x 10 to the 6th K and an emission measure of 2.9 x 10 to the 48th per cu cm. This hot isothermal component appears at the peak of the normal power-law-like impulsive X-ray burst component, and it remains isothermal and dominates the X-ray emission below about 30 keV through the decay of the flare event.

Lin, R. P.↗

Ice depolarization of the Comstar beacon at 28.56 GHz during low fades and correlation with radar backscatter

Radar correlation with significant ice depolarization events accompanied by low copolarization fades of the 28.56-GHz Comstar beacon signal are described for an experimental program at Wallops Island, VA. Using a Faraday switch at the front end of the receiver, the copolarization and cross-polarization levels of the 28.56-GHz beacon signal are sequentially monitored. A nearby high resolution S-band radar pointing along the earth-satellite path monitors the simultaneous ice and rain reflectivity. For a first case considered, excellent correlation is noted between the cross-polarization events and relatively large and extended ice reflectivities along a segment of the earth-satellite path at altitudes near and above the 0 C isotherm. In a second case, the radar and receiver data strongly suggest the cross-polarization mechanism is due to a hailshaft which intersects the path at altitudes well below the 0 deg isotherm.

Goldhirsh, J.↗

X-ray observations of Abell 2218 and implications for the Sunyaev-Zel'dovich effect

The Einstein Observatory was used to obtain a high-resolution X-ray image and an X-ray flux measurement of the galaxy cluster Abell 2218. The combined system of intracluster medium and galaxies is modeled as a gas in hydrostatic equilibrium in a common gravitational potential with an isothermal galaxy component. This model is then fitted in the least-squares sense to the X-ray surface brightness distribution and to the optically determined galaxy surface density profile to determine model parameters. The gas is found to be nominally isothermal, moderately dense, and very hot (10-30 keV); these conditions are consistent with the Sunyaev-Zel'dovich effect, i.e., the diminution in the cosmic microwave background radiation intensity in the direction of this cluster. It is noted that the considerable imprecision inherent in the method of distance measurement based on the combination of microwave measurements with X-ray and optical data makes it impossible to make a definitive statement about the distance to Abell 2218.

Boynton, P. E.↗

The cosmic microwave background radiation as a probe of the large-scale structure of the universe

Cosmological and astrophysical implications of large scale fluctuations in the cosmic microwave background are discussed, with attention given to galaxy formation. Angular anisotropies are mentioned as yielding information on the matter distribution during early epochs, characterized by inhomogeneities which persist on large scales. Factors such as the curvature of the universe and the hypothesis of massive neutrinos with m more than 30 eV affect the observed anomalies, which can be traced backwards to determine the source of nonlinear structures. Neutrino rest masses of less than a few eV imply isothermal fluctuations in the initial conditions, while gaseous fragmentation of adiabatic pancakes does provide a basis for an acceptable galaxy formation and clustering scenario. However, the primordial isothermal fluctuations fit well with observational constraints imposed by a neutrino-dominated universe.

Silk, J.↗

Experiments in dilution jet mixing

Experimental results are given on the mixing of a single row of jets with an isothermal mainstream in a straight duct, to include flow and geometric variations typical of combustion chambers in gas turbine engines. The principal conclusions reached from these experiments were: at constant momentum ratio, variations in density ratio have only a second-order effect on the profiles; a first-order approximation to the mixing of jets with a variable temperature mainstream can be obtained by superimposing the jets-in-an isothermal-crossflow and mainstream profiles; flow area convergence, especially injection-wall convergence, significantly improves the mixing; for opposed rows of jets, with the orifice centerlines in-line, the optimum ratio of orifice spacing to duct height is one half of the optimum value for single side injection at the same momentum ratio; and for opposed rows of jets, with the orifice centerlines staggered, the optimum ratio of orifice spacing to duct height is twice the optimum value for single side injection at the same momentum ratio.

Holdeman, J. D.↗

Low-gravity experiments on Liquid Phase Miscibility Gap (LPMG) alloys: Materials Experiments Assembly (MEA)

Space shuttle experiments which study the massive separation which occurred during sounding rocket Al-In alloy tests are described. The gradient cool experiment studies surface tension driven droplet migration and particle pushing in an LPMG alloy. Isothermal experiments on the Te-Tl alloys test the hypothesis that LPMG systems with low surface energies produce relatively fine, and uniform emulsions and dispersions. It also examines the effect of droplet concentration on phase separation kinetics. Isothermal plunger experiments on Al-In alloys determine whether surface tension driven convection currents originating at a free surface contribute to massive separation. They ascertain whether In-rich droplets migrate under the action of a temperature gradient when they are not influenced by the crucible walls.

Gelles, S. H.↗

The influence of coastal shape on winter mesoscale air-sea interaction

In cold air outbreaks, the combination of coastal shape and sea surface isotherms has a profound effect in the establishment of mesoscale atmospheric circulation, due to differential heating resulting from both overwater path length and underlying sea surface temperature (SST) variations. Where coastal effects are dominant, a mesoscale front forms downstream of the point which marks the major bend in the coastline's orientation. The strength of the induced mesoscale circulation depends on the original contrast between the land air temperature and the SST. It is noted that where the coastline and the isotherm pattern are approximately normal to the mean boundary layer flow, and thermal contrast is sufficiently large, the cloud streets formed downstream will be convective in nature, and oriented with the axis of roll vortices along the wind direction.

Atlas, D.↗