Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPLEMENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

NASA/NOAA implementation of the USAID-sponsored satellite ground station and data processing facility for Bangladesh

A description is given of a project to transfer multiple environmental satellite data reception, processing, and interpretation capabilities from the U.S. to Bangladesh. The goal of the project is to improve the management of resources related primarily to agriculture, water development, forestry, and fisheries. It is also hoped to improve the existing cyclone/storm surge warning system. An account is given of the interagency and international cooperation underlying the project. The remote-sensing installation in Dhaka, Bangladesh, is described, and the most likely system applications are summarized. Attention is also given to the special requirements concerning this type of technology transfer, and an assessment is made of the project's practical value to Bangladesh.

Dodge, J. C.↗
NASA NTRS1983

Space Station needs, attributes and architectural options. Volume 2, book 2, part 1: Mission implementation concepts

The overall configuration and modules of the initial and evolved space station are described as well as tended industrial and polar platforms. The mass properties that are the basis for costing are summarized. User friendly attributes (interfaces, resources, and facilities) are identified for commercial; science and applications; industrial park; international participation; national security; and the external tank option. Configuration alternates studied to determine a baseline are examined. Commonality for clustered 3-man and 9-man stations are considered as well as the use of tethered platforms. Requirements are indicated for electrical, communication and tracking; data management Subsystem requirements for electrical, data management, communication and tracking, environment control/life support system; and guidance navigation and control subsystems are identified.

Source record↗
NASA NTRS1984

Implementation of Large Antennas for Deep Space Mission Support

The large antennas of the DSN support reception of low power telemetry signals from spacecraft (S/C), transmission of high power commands to S/C, and navigation of S/C by precision radiometric data. The specification and design of antennas were driven by the requirement to support those functions with high reliability. The number of antennas required in the DSN is determined by the number of S/C to be supported and their level of activity. A given size antenna aperture can be realized with a single element or by arraying smaller elements with the same total area. That approach can be applied to meeting many DSN requirements. There is a cost vs capability trade-off in arrayed vs single element designs. The operating microwave frequency is an important parameter for the antenna. Major radio astronomy antennas can be arrayed with DSN antennas to increase reception capability. The specification, design, and development of DSN antennas are examined.

Stevens, R.↗
NASA NTRS1984

A Kosloff/Basal method, 3D migration program implemented on the CYBER 205 supercomputer

Conventional finite difference migration has relied on approximations to the acoustic wave equation which allow energy to propagate only downwards. Although generally reliable, such approaches usually do not yield an accurate migration for geological structures with strong lateral velocity variations or with steeply dipping reflectors. An earlier study by D. Kosloff and E. Baysal (Migration with the Full Acoustic Wave Equation) examined an alternative approach based on the full acoustic wave equation. The 2D, Fourier type algorithm which was developed was tested by Kosloff and Baysal against synthetic data and against physical model data. The results indicated that such a scheme gives accurate migration for complicated structures. This paper describes the development and testing of a vectorized, 3D migration program for the CYBER 205 using the Kosloff/Baysal method. The program can accept as many as 65,536 zero offset (stacked) traces.

Pyle, L. D.↗
NASA NTRS1984

Development and implementation of advanced diagnostic techniques

Two techniques were identified which offer great potential in the measurement of sprays. The first is referred to as IMAX, and it consists of a nonintrusive pulse height analyzer. The second is referred to as Visibility/Intensity (V/I) and it performs a size measurement by examining the visibility and the pedestal intensity that the IMAX technique provides a larger dynamic range and higher accuracy than V/I. It also shows that the two-color IMAX concept provides a higher S/N primarily because of the high efficiency in spectrally separating the two signals. The size distribution of two kinds of sprays are reported. The first spray was produced by a Berglund-Liu droplet generator with dispersion air. The second spray was produced by a pressure nozzle.

Hess, C. F.↗
NASA NTRS1984

Experiences with the design and implementation of flutter suppression systems

Research efforts aim at flutter suppression are discussed. The application of active controls technology to reduce the aeroelastic response of aircraft structures is discussed. Feedback control, control law design processes and synthesis, wind tunnel studies, and delta-wing wind tunnel models are discussed.

Newsom, J. R.↗
NASA NTRS1984

RIM as an implementation tool for a distributed heterogeneous database

The another distributed database system (ADDS) prototype supports interactive, d hoc retrieval from several of the Amoco/Standard DHDBMS. The ADDS conceptual design, the usage of RIM in several components of ADDS, and some enhancements ot RIM that were used by the developers of the ADDS prototype are outlined. Topics covered include: (1) ADDS Overview; (2) composite database dictionary/directory; (3) user interface and user profiles; (4) subrequest execution; (5) merger/formatter; and (6) a transportable implamentation.

Breitbart, Y. J.↗
NASA NTRS1983

Decoding: Codes and hardware implementation

The MST radars vary considerably from one installation to the next in the type of hardware, operating schedule and associated personnel. Most such systems do not have the computing power to decode in software when the decoding must be performed for each received pulse, as is required for certain sets of phase codes. These sets provide the best signal to sidelobe ratio when operating at the minimum band length allowed by the bandwidth of the transmitter. The development of the hardware phase decoder, and the applicability of each to decoding MST radar signals are discussed. A new design for a decoder which is very inexpensive to build, easy to add to an existing system and is capable of decoding on each received pulse using codes with a band length as short as one microsecond is presented.

Sulzer, M. P.↗
NASA NTRS1983

A study of space station needs, attributes, and architectural options, volume 2, technical. Book 2: Mission implementation concepts

Space station systems characteristics and architecture are described. A manned space station operational analysis is performed to determine crew size, crew task complexity and time tables, and crew equipment to support the definition of systems and subsystems concepts. This analysis is used to select and evaluate the architectural options for development.

Source record↗
NASA NTRS1984

Implementation of the Sun Position Calculation in the PDC-1 Control Microprocessor

The several computational approaches to providing the local azimuth and elevation angles of the Sun as a function of local time and then the utilization of the most appropriate method in the PDC-1 microprocessor are presented. The full algorithm, the FORTRAN form, is felt to be very useful in any kind or size of computer. It was used in the PDC-1 unit to generate efficient code for the microprocessor with its floating point arithmetic chip. The balance of the presentation consists of a brief discussion of the tracking requirements for PPDC-1, the planetary motion equations from the first to the final version, and the local azimuth-elevation geometry.

Stallkamp, J. A.↗
NASA NTRS1984

Implementation of uniform perturbation method for potential flow past axisymmetric and two-dimensional bodies

The aerodynamic characteristics of potential flow past an axisymmetric slender body and a thin airfoil are calculated using a uniform perturbation analysis method. The method is based on the superposition of potentials of point singularities distributed inside the body. The strength distribution satisfies a linear integral equation by enforcing the flow tangency condition on the surface of the body. The complete uniform asymptotic expansion of its solution is obtained with respect to the slenderness ratio by modifying and adapting an existing technique. Results calculated by the perturbation analysis method are compared with the existing surface singularity panel method and some available analytical solutions for a number of cases under identical conditions. From these comparisons, it is found that the perturbation analysis method can provide quite accurate results for bodies with small slenderness ratio. The present method is much simpler and requires less memory and computation time than existing surface singularity panel methods of comparable accuracy.

Wong, T. C.↗
NASA NTRS1984

User's manual for a fuel-conservative descent planning algorithm implemented on a small programmable calculator

A simplified flight management descent algorithm was developed and programmed on a small programmable calculator. It was designed to aid the pilot in planning and executing a fuel conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The algorithm may also be used for planning fuel conservative descents when time is not a consideration. The descent path was calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard temperature effects. An explanation and examples of how the algorithm is used, as well as a detailed flow chart and listing of the algorithm are contained.

Vicroy, D. D.↗
NASA NTRS1984

Configuration and Implementation

The main objectives of a Planetary Data System (PDS) are to curate planetary data - that is to store and maintain complete planetary data sets and the necessary supporting documentation to make them useful - and to facilitate scientific study of these data through improved organization and access. A hardware system, no matter how sophisticated and supportive, cannot replace the live colleague interaction needed for good science.System users with only a general knowledge of a data file or data set will need guidance in determining whether that data is most appropriate to support a theory. The PDS is meant to allow easy access to data, to provide useful presentations of that data, and to facilitate data analysis; however it is not designed to supercede the critical examination and interactions that data analysis requires. The Planetary Data System will be a powerful research tool which allows the entire planetary science community access to a complete data and will facilitate the archiving of pass, current, and future mission data sets.

Source record↗
NASA NTRS1983

Retention of ion-implemented-xenon in olivine - Dependence on implantation dose

The diffusion of Xe in olivine, a major mineral in both meteorites and linear samples, was studied. Xe ions were implanted at 200 keV into single-crystal synthetic-forsterite targets and the depth profiles were measured by alpha particle backscattering before and after annealing for 1 hour at temperatures up to 1500 C. The fraction of implanted XE retained following annealing was strongly dependent on the implantation dose. Maximum retention of 100 percent occurred for an implanting dose of 3 x 10 to the 15th power Xe ions/sq cm. Retention was less at lower doses, with approximately more than or = 50 percent loss at one hundred trillion Xe ions/sq cm. Taking the diffusion coefficient at this dose as a lower limit, the minimum activation energy necessary for Xe retention in a 10 micrometer layer for ten million years was calculated as a function of metamorphic temperature. Previously announced in STAR as N83-18528

Melcher, C. L.↗
NASA NTRS1983

Design and implementation of a multigrid code for the Euler equations

The steady-state equations of inviscid fluid flow, the Euler equations, are a nonlinear nonelliptic system of equations admitting solutions with discontinuities (for example, shocks). The efficient numerical solution of these equations poses a strenuous challenge to multigrid methods. A multigrid code has been developed for the numerical solution of the Euler equations. In this paper some of the factors that had to be taken into account in the design and development of the code are reviewed. These factors include the importance of choosing an appropriate difference scheme, the usefulness of local mode analysis as a design tool, and the crucial question of how to treat the nonlinearity. Sample calculations of transonic flow about airfoils will be presented. No claim is made that the particular algorithm presented is optimal.

Jespersen, D. C.↗
NASA NTRS1984

Numerical studies of motion of vortex filaments - Implementing the asymptotic analysis

A computational code is developed for the integro-differential equations governing the motion of the centerlines of vortex filaments submerged in a background potential flow. These equations, which are derived from the method of matched asymptotic analysis, include the effect of the decaying large-magnitude circumferential and axial velocity components in the vortical cores. Numerical examples are presented to assess the effect of a large axial velocity and that of nonsimilar initial profiles in the vortical cores. The initial configurations of the filaments are chosen so as to fulfill the basic assumption of the asymptotic analysis, which is that the effective vortical core size is much smaller than all the other length scales in the flowfield, e.g., the radius of curvature and the interfilament distance. The computations are continued until the basic assumption is no longer valid, that is when the merging or intersection of filaments has begun. A classification of the various types of local or global merging or intersection of filaments is made and demonstrated by numerical examples. It is then shown that the asymptotic solution not only provides the initial data but also can be used to formulate the appropriate boundary conditions for the numerical solution of a merged region.

Liu, C. H.↗
NASA NTRS1982

ACEE program rationale and implementation

The impact of the Aircraft Energy Efficiency program (ACEE) on commercial aviation is examined. In addition to the emphasis on air transport fuel efficiency, topics such as airline operating costs, air transport effects on U.S. trade, and fuel price forecasts are addressed. An overview of the program and its contribution to aviation technology is included.

Aiken, W. S., Jr.↗