Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heat Load”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Dissociative Recombination (DR) and Associative Ionization (AI) Cross Section Calculations for the NO+ + e yields N + O (2D+3P, 2P+3P, and 2D+1D) Reaction for Atmospheric Entry Modeling

During entry of a space craft into Earth atmosphere, the flow surrounding the vehicle becomes partially ionized leading to significant cation and free-electron production. Subsequently, electron impact excitation and dissociation form radiating excited state species that contribute to the heat load on the vehicle. While experimental data on selected total cross sections are available, few experiments address the need for accurate AI cross sections for metastable atomic states at the high temperatures realized in atmospheric re-entry. In order to maintain desired safety margins during atmospheric entry of a space vehicle, chemical reaction models need to accurately account for this process. For the present study, we have computed vibrationally resolved cross sections for the DR of NO+ for electron energies between 0.01 to 10 eV and apply microscopic reversibility to obtain the AI cross sections and rate coefficients. For the DR cross section calculations, we use state-of-the-art MRCI potential energy curves. The resulting adiabatic potential curves are transformed to a diabatic representation, which is used in time-dependent wave packet calculations to describe the nuclear motion of the dissociating cation upon collision with an electron. Based on the wave function evolution in time, these calculations provide T-matrix and cross sections for the DR including recombination into the low energy metastable atomic states. The DR and AI rate coefficients are compared with the available experimental data.

Ewa Papajak↗

Thermal Analysis of an In-Space Heat Shield Exposed to a Rocket Plume During Stage Separation

Thermal analyses were conducted to evaluate the thermal response of various individual materials and multi-layer configurations for an in-space heat shield exposed to a rocket plume during stage separation. Frequently used, readily available thermal protection materials consisting of cork, carbon cloth phenolic (CCP), and silica cloth phenolic (SCP) were selected for an initial screening analysis. SCP was chosen as the primary material for further evaluation using an updated thermal environment calculated using computational fluid dynamics (CFD) results. A multi-layer configuration consisting of SCP providing erosion resistance and a Nomex honeycomb providing thermal protection was then evaluated as a solution for more mass-efficient performance. Pyrolysis depth, bondline temperature, back-side temperature, and a thermal factor of safety were used to define the necessary material thickness profile. Adhesives were included in the analyses with considerations for maximum temperature and application method. One dimensional thermal analyses at several stations along the heat shield surface were performed for the initial screening and follow-on analyses. The methodology used standard processes and computer programs applicable to solid rocket motor internal insulation and nozzle thermal analysis such as Chemical Equilibrium and Applications (CEA), Aerotherm Chemical Equilibrium (ACE), Momentum/Energy Integral Technique (MEIT), and Insulation Thermal Response and Ablation Code (ITRAC). The baseline SCP/Nomex honeycomb multi-layer configuration thermal performance predictions satisfied the objectives with an acceptable mass estimate for the design maturity. The EA9673 film adhesive and SCP resin were the best performing bonding agents considered for the SCP/Nomex honeycomb and Nomex honeycomb/structural substrate interfaces. The baseline mass estimate was lowest when the resin was the bonding agent due to the higher maximum service temperature. These thermal analyses evaluated typical internal and external nozzle materials using a calculated thermal environment and heat loads that were lower than a typical rocket motor internal environment but greater than standard external aeroheating.

Andrew T Hiatt↗

Application of OpenFOAM to Plume Impingement in Space Environments

After 30 years of continuous human presence in low-earth orbit, NASA is returning to the moon and eventually will go to Mars. Travelling beyond low earth orbit requires NASA to learn how humans can live in Deep Space environments – beyond the protection of Earth’s magnetosphere and at distances from Earth that prevent a quick return in case of trouble. To this end, NASA is constructing the Lunar Gateway, an ISS-like space station to be put in orbit around the moon to act as a home base for Lunar exploration for NASA astronauts. The Gateway Lunar outpost will be built incrementally, via modules which will arrive at separate times and dock to the existing structure. The incremental addition of Gateway modules, and the docking of visiting vehicles, is achieved via a sequence of firings from the approaching body’s onboard reaction control system (RCS) thrusters to achieve the required approach trajectory. The typical hypergolic chemical RCS thrusters work by firing hot gases to produce adverse thrust and the needed change in velocity to safely finish the docking process. The exhaust gas from the RCS thrusters form plumes that expand into the vacuum of space and can impinge onto the outer surfaces of the Lunar Gateway, causing unwanted forces and moments, heat loads, sediment deposition, and in extreme cases, even surface erosion - all mechanisms that can damage the Lunar Gateway and must be minimized. Both permanent and visiting modules will have this RCS thruster exhaust impingement problem. This research aims to establish existing OpenFOAM solvers as a methodology for improving simulation techniques of rocket exhaust plume impingement in space environments. The flow structure of a plume in a space environment is complex; a plume that originates from a hypergolic chemical RCS thruster and expands into a vacuum will experience several regimes of rarefication. This range includes the continuum flow in the rocket nozzle through the fully rarefied free molecular flow further from the nozzle. The flow physics is different at these two extremes, and as such, the simulation approach for plumes is generally divided into a traditional computational fluid dynamics (CFD) simulation in and near the nozzle which is coupled to a subsequent direct simulation Monte Carlo (DSMC) simulation. At this time, the scope of this research is developing, verifying, and validating a method using existing solvers in the OpenFOAM framework for performing coupled CFD/DSMC calculations to determine the extent of plume impingement loading on generic space structures. This presentation will detail code-to-code comparisons between the hyStrath dsmcFoam+ solver, developed using OpenFOAM and available as open-source, and NASA’s in-house DSMC Analysis Code (DAC). Comparisons to several open-source publication findings using DAC [3,4] are presented, and advantages of using an OpenFOAM based solver are also discussed. The presentation concludes with a discussion of future work, and a plan for coupling the dsmcFoam+ solver with CFD simulations of chemical rocket engines for unified coupled plume simulation.

DSMC↗

Human Thermal Assessment of Traverse and Geology Task Iterations During Simulated Lunar Extravehicular Activity

Spacewalks or extravehicular activities (EVA) in microgravity are mentally and physically demanding. Current microgravity EVAs are predominantly focused on upper body tasks on engineered surfaces; however, the introduction of gravity means that crew members during future lunar EVAs will be required to perform tasks that generate full body workloads such as navigating natural lunar terrain while conducting geological sampling. To date, only 12 people have walked on the surface of the Moon resulting in limited knowledge of suited thermal regulation under lunar-relevant physical workloads. To address this gap, a study is underway to focus on spacesuit operations with simulated lunar EVA workloads. This study presents methodology for collecting standard thermal measures during suit testing. In this pilot study, two suited subjects underwent simulated lunar EVAs using the NASA Active Response Gravity Offload System (ARGOS) to simulate the effects of partial gravity. Each lunar EVA, lasting three to five hours, included various metabolically demanding EVA tasks. Subjects donned the NASA Mark III (MK III) space suit and were offloaded to 1/6th G (lunar gravity). A subset task circuit from one of these simulations replicated an EVA traverse to a lunar crater, taking a geological sample, and returning to base. The suited subject walked one 1500 m (0% grade) and three 500 m traverses at three different grades (10, 20, 30%). Between each traverse, subjects performed geology sampling tasks (0 and 10% grade). Thermal measurements included core and skin temperature, liquid cooling garment (LCG) inlet and outlet temperature, and spacesuit gas inlet and outlet temperature and humidity. Compared to baseline core temperature (S1 = 37.07±0.32 °C, S2 = 37.27±0.01 °C) and mean skin temperature (S1 = 32.38±0.34 °C, S2 = 33.62±0.03 °C), after a 1500 m traverse, each suited subject showed an increased core temperature (S1 = 37.23±0.12 °C, S2 = 37.41±0.11°C) and decreased mean skin temperature (S1 = 32.16±0.17 °C, S2 = 31.53±1.15 °C) at a delta LCG temperature (S1 = 1.86±0.24 °C, S2 = 2.20±0.76 °C) and delta suit humidity (S1 = 9.66±1.49 %, S2 = 11.50±1.58 %). Core temperature continued to increase from compounding traverse and geology tasks (S1 = 38.04±0.03 °C, S2 = 38.1±0.02 °C) accompanied by an increase in delta LCG temperature (S1 = 2.24±0.13 °C, S2 = 2.67±0.12 °C) and delta suit humidity (S1 = 28±2.42 %, S2 = 31±2.13 %). Conversely, as the circuit progressed, mean skin temperature continued to decrease due to sustained LCG heat rejection (S1 = 30.08±0.15 °C, S2 = 30.28±0.07 °C). During the simulated EVA circuit core temperature increased to elevated values and remained elevated as heat was retained while mean skin temperature decreased due to peripheral heat offloaded to the LCG. The thermal measures collected during this study provided critical heat loading dynamics during lunar EVA tasks. Including core and skin temperatures along with suited thermal measures provides a standard data collection scheme for human thermal metrics during EVA task management. Data collected in this configuration can be used to build future lunar EVA task circuits and human thermal predictions.

Bradley Hoffmann↗

Feasibility and Performance Analysis of Magnetohydrodynamics Control for Aerocapture at Neptune

NASA’s most recent Decadal Survey posed a mission to one of the Ice Giants as the top priorityfor flagship missionsin the organization’s future. However, current technologieslimit the amount of scientific payload available for future Uranian and Neptunian missions due to the need for fuel for orbit insertion maneuvers. Thus, to maximize the scientific potential of futuremissions, atmospheric aerocapture has been heavily researched. While atmospheric aerocapture simulations have proven enabling for capturing around Neptune, its deep atmospheric pass requiresan aeroshell with thermal protection systems(TPS).Magnetohydrodynamically-controlled aerocapture serves as a potential solution to both fully-propulsive orbit insertion and atmospheric aerocapture. Through NASA Langley’s high-fidelity flight dynamics simulation, the Program to Optimize Simulated Trajectories II, both the atmospheric and magnetohydrodynamic aerocapture methods were simulated and compared for identical missions to Neptune. After applying a guidance algorithm for both methods, the results showed that magnetohydrodynamics has not only the control authority to successfully capture around Neptune, but also the unique advantage of a shallower atmospheric pass which decreases the maximum heat load and the required TPS mass.

Danny N Nguyen↗

Towards Plume Impingement Modeling in Space Environments

After 30 years human presence in low-earth orbit, NASA is returning to the moon and eventually will go to Mars. To this end, NASA is constructing the Lunar Gateway, an ISS-like space station to act as a home base for Lunar exploration. A large space station must be assembled while in orbit, using a “piecemeal” approach. In this context, it means that the different modules will arrive at different times and attach to what is already in service. The ISS provides an excellent example of this approach, and the proposed Lunar Gateway will undergo a similar assembly process. This assembly is achieved via “docking” maneuvers between modules, which are made possible by sequential firings of the onboard reaction control system (RCS) thrusters. They work by firing hot gases to produce adverse thrust and the needed change in velocity to safely finish the docking approach. The issue is that the gas from these thrusters' forms flow structures described as “plumes” and can impinge onto the outer surfaces of the space station, causing unwanted forces and moments, heat loads, sediment deposition, and in extreme cases, even surface erosion. All mechanisms that can damage the space station and must be avoided. Both permanent and visiting modules will have these RCS thruster exhaust impingement problems. Accurately and efficiently modeling these plume is an involved multi-physics calculation but also an important tool when designing the control algorithms of approaching modules. This poster presents progress towards this simulation on two fronts. First is the verification of OpenFOAM for rarefied plume impingement calculations by direct comparison to published DAC cases. Second is the estimation of plume impingement strikes over the time scale of an entire docking event. This is done by using a simple plume source flow model and a prescribed motion visualizer—coded in Python. Together these tools help push NASA's capabilities for simulating these plume impingement effects.

Rarefied Flows↗

Feasibility and Performance Analysis of Magnetohydrodynamics Control for Aerocapture at Neptune

NASA’s most recent Decadal Survey posed a mission to one of the Ice Giants as the top priority for flagship missions in the organization’s future. However, current technologies limit the amount of scientific payload available for future Uranian and Neptunian missions due to the need for fuel for orbit insertion maneuvers. Thus, to maximize the scientific potential of future missions, atmospheric aerocapture has been heavily researched. While atmospheric aerocapture simulations have proven enabling for capturing around Neptune, its deep atmospheric pass requires an aeroshell with thermal protection systems(TPS). Magnetohydrodynamically-controlled aerocapture serves as a potential solution to both fully-propulsive orbit insertion and atmospheric aerocapture. Through NASA Langley’s high-fidelity flight dynamics simulation, the Program to Optimize Simulated Trajectories II, both the atmospheric and magnetohydrodynamic aerocapture methods were simulated and compared for identical missions to Neptune. After applying a guidance algorithm for both methods, the results showed that magnetohydrodynamics has not only the control authority to successfully capture around Neptune, but also the unique advantage of a shallower atmospheric pass which decreases the maximum heat load and the required TPS mass.

Danny Nguyen↗

Current State of NASA Continuously Rotating Detonation Cycle Engine Development

NASA is currently investigating continuous detonation cycle engines for the application of lander and interplanetary space exploration missions. The performance benefits of a detonation cycle engine may allow for a broader design trade space and more compact geometry required for future missions to the Moon and onwards towards Mars. However, the technology readiness level (TRL) within the US was found to be low with several major risk factors that require understanding prior to full engine system development. One area of uncertainty is the extreme heat loads expected during thermal steady state conditions. To achieve this, an announcement for collaborative opportunity (ACO) partnership between IN Space LLC and NASA Marshall Space Flight Center (MSFC) was established to explore integration of additive manufacturing (AM) processes and the high conductance copper-based alloys, GRCop-42 and GRCop-84. This work outlines the hot fire testing of a 7K lbf thrust class fully AM GRCop-alloy rotating detonation rocket engine (RDRE). Two annular thrust chamber configurations emulating a lander engine system were tested with LOx/GH2 and LOx/LCH4. In both configurations, select hardware was actively cooled using de-ionized water and regeneratively cooled using LCH4. All primary hardware survived long duration tests to thermal steady state up to 133 seconds in a single burn. In total, 18 starts and 802 seconds of duration were achieved with and without visual confirmation of waves present. The proportion of burned propellant, or level of complete combustion, was found to be high compared to the theoretically achievable mean chamber pressure in all cases.

Thomas Teasley↗

Stagnation Point Convective Heating Correlations for Entry Into H2/He Atmospheres

New convective heating correlations have been developed over a broad range of entry conditions into H2/He atmospheres. The correlations are based on calculations of stagnation point convective heat fluxes over a large range of velocities, densities, and effective nose radii. The heat fluxes and corresponding flowfields are computed using NASA’s hypersonic computational fluid dynamics code, DPLR. Cases in this study have been computed using both a temperaturelimited, radiative equilibrium wall and a cold wall temperature boundary condition. The results for the scaled heat flux, as a function of the difference in freestream and wall enthalpies, show a clear deviation from the linear trend predicted by the method of Sutton and Graves. Therefore, updated non-linear correlations are proposed for the prediction of stagnation point convective heat fluxes. Generally, these updated correlations predict lower heat loads and therefore smaller required TPS thicknesses when compared to previous correlations for a range of test cases in the Neptune, Saturn, and Uranus atmospheres.

Alex T. Carroll↗

Designed Experiment Results for Constituent Effects on NBR Based Solid Rocket Motor Insulation Performance

Solid rocket motor internal insulations are facing serious issues with obsolescence of constituents and the need for improved performance. The design community is at a unique point with a large number of rocket motors requiring reformulation of insulation or design upgrades at the same time. Unfortunately, performance data related to component choice is not generally available to aid development. A study of insulation component materials, conducted at Marshall Space Flight Center over the last four years, used designed experiments to understand the contribution of each material to the performance of a formulation. This report covers work with Nitrile Butadiene Rubber (NBR) based formulations. In-house compounding provided modified formulations allowing for isolation of both individual and synergistic effects. All formulas were tested for mechanical, thermal and producibility properties to evaluate performance. This presentation will describe the methodology for, and results from, identifying the individual and combined effects of components used in our formulations. Specific properties investigated include, rheology, cure characteristics, density, tensile strength, along with erosion/ablation under various heat loads and flame chemistries. Scale up of several formulas from lab to production size batches was accomplished. We will discuss troubleshooting problems of scale and the new set of designed experiments with Ethylene Propylene Diene Monomer (EPDM) based formulations.

Insulation↗

Stagnation Point Convective Heating Correlations for Entry Into H2/He Atmospheres

New convective heating correlations have been developed over a broad range of entry conditions into H2/He atmospheres. The correlations are based on calculations of stagnation point convective heat fluxes over a large range of velocities, densities, and effective nose radii. The heat fluxes and corresponding flow fields are computed using NASA’s hypersonic computational fluid dynamics code, DPLR. Cases in this study have been computed using both a temperature limited, radiative equilibrium wall and a cold wall temperature boundary condition. The results for the scaled heat flux, as a function of the difference in freestream and wall enthalpies, show a clear deviation from the linear trend predicted by the method of Sutton and Graves. Therefore, updated non-linear correlations are proposed for the prediction of stagnation point convective heat fluxes. Generally, these updated correlations predict lower heat loads and therefore smaller required TPS thicknesses when compared to previous correlations for a range of test cases in the Neptune, Saturn, and Uranus atmospheres.

Alex T. Carroll↗

Single and Multi-Node Modeling of Direct, Submerged, and Self-Pressurization of A Cryogenic Propellant Tank Using Nodal Tools

The pressurization of cryogenic propellant tanks will always be an important process so long as cryogenic liquids are being considered as fuel sources or used for other in-space applications. Pressure control of the tank ullage is necessary for managing propellant flowrates to an engine or a receiver tank, and modeling of the process is used to predict the pressurant requirements and the amount of propellant boiloff. Direct ullage pressurization is the more traditional approach to tank pressurization, as the physics are straight-forward, and ample test (flight) data have been collected and analyzed over the past several decades. Submerged injection pressurization is an alternate method for tank pressurization and has been shown to reduce pressurant requirements, subcool the propellant, and reduce the risk of ullage collapse. Additionally, the pressurant gas entering the ullage is usually much colder when using the submerged pressurization approach, resulting in reduced propellant boiloff. These benefits are at the expense of vaporizing a small percentage of the propellent. Both tank pressurization methods are viable options for current and future space missions, and it is important to have the capability of analyzing the tank ullage conditions for both approaches. Our previous work has demonstrated the development of a Generalized Fluid System Simulation Program (GFSSP) model, which contains a thermodynamic equilibrium heat and mass transfer subroutine capable of effectively analyzing both direct and submerged pressurization systems [1-2]. This subroutine has most recently been enhanced to include the non-equilibrium effect of pressurant dissolution into the propellant. To date the ullage has always been represented as a single node, and although the simulated single-node temperatures have good comparison with the volume-averaged ullage temperatures computed from test data, the physics of the thermal stratification in the ullage were never captured, and adjustment factors in the model were required. The purpose of this paper is to introduce the development of a multi-node ullage model using GFSSP and to discuss the improvements of the simulated ullage temperature distribution and its resulting effects on ullage heat transfer processes. Test data from the Cryogenic Propellant Storage and Transfer Engineering Developmental Unit (CPST EDU) was used for model validation. For additional comparison, a Thermal Desktop (TD) model was also developed to analyze the CPST EDU direct ullage pressurization tests using both a single node and multi-node approach. The model includes the direct pressurant line, vent line, fill/drain line, and a TD FloCAD Compartment. The TD FloCAD Compartment is employed to represent the liquid and ullage as single volumes inside the tank, to include a liquid/vapor interface, and to generate network level objects such as lumps (analogous to nodes in GFSSP), paths, and ties between the fluid and thermal elements. An established heat load on the model tank was leveraged from a pre-existing higher-fidelity model correlated to CPST EDU test data.

pressurization↗

In-Orbit Selection of Cryocooler Drive Frequencies for XRISM/Resolve

The XRISM/Resolve instrument cooling system uses adiabatic demagnetization refrigerators (ADRs) to cool the detectors to 50 mK and two types of cryocoolers to reduce heat load on the He tank, Joule-Thomson and Stirling cryocoolers. Resolve was designed with tunable cryocooler frequencies so that any mechanical interference and its effect on performance could be minimized. Measurements at different cryocooler drive frequencies were used to quantify the interference and narrow the acceptable range of frequency options. For Resolve the choice of cryocooler drive frequencies dramatically influences the instrument performance. Poor choices have been shown to degrade ADR cooling power and degrade the spectroscopic performance of the instrument. However, good choices have been shown to be free of undesirable features, allowing the instrument to satisfy its performance requirements with significant margin. Thus, the choice of drive frequencies is a critical factor for overall instrument performance. The drive frequencies of the Joule-Thomson cooler operating near 52 Hz, and the Stirling coolers operating near 15 Hz were adjusted in three distinct scan sequences to efficiently narrow the candidate frequency options. The frequency choices were based on stability of the 50 mK control thermometer, changes in the ADR demagnetization rate, and changes in detector noise. Scans across the drive frequency range of each cryocooler were performed multiple times during ground testing. Surprisingly, the results were not repeatable across test campaigns and did not conform to any discernable trend, but they were repeatable when remeasured within a single cool-down cycle. The conclusion was that the good/bad drive frequencies changed during Dewar warmup/cooldown, and possibly after mechanical vibration tests. Therefore, the settings could not be finalized before launch, and scans during instrument commissioning were necessary. This paper describes the cryocooler frequency scan measurements and compares the results during instrument commissioning to those performed during ground tests.

Gary A. Sneiderman↗

Aeroheating Environments of Aerocapture Systems for Uranus Orbiters

Aeroheating environments for an aerocapture system enabling flagship-class science at Uranus are presented. Applicability of a low lift-to-drag entry vehicle aeroshell with flight heritage for Martian entries is considered in the context of an end-to-end Uranus orbiter and probe mission design using aerocapture for orbit insertion. A feasible trajectory space for aerocapture orbit insertion based on various launch opportunities and interplanetary trajectories yield atmosphere-relative entry velocities between 22 km/s and 31 km/s with maximum freestream densities on the order of 10−5 kg/m3. A preliminary study of the aerothermal environments for the entire trajectory space is discussed followed by a more detailed study of the nominal design trajectories. Design conditions are based on laminar, thermochemical nonequilibrium Navier-Stokes flowfield simulations with coupled radiation transport for full lift-up (deep) and lift-down (shallow) design trajectories. Convective heating is found to be the dominant heating mode, with radiation accounting for only 1 % to 5 % of the total heat flux for the design trajectories. The peak design conditions are found to be 422 W/cm2 for heat flux, 10.5 kPa for pressure, 149 Pa for shear stress, and 88.1 kJ/cm2 for the total heat load.

Uranus↗

Design Implications for Aerocapture Systems Placing Flagship-class Uranus Orbiters

Aerocapture has the capability to deliver spacecraft to Ice Giant orbits while increasing on-orbit payload mass. Due to the aerodynamic forces and heat loads encountered during an aerocapture maneuver, the spacecraft must be contained by an entry vehicle, such as a typical rigid aeroshell used for planetary entry. This paper provides a preliminary design concept for an aerocapture system capable of delivering a flagship-class orbiter and planetary probe to Uranus orbit using heritage flight systems. The constraints of packaging large subsystems (radioisotope power systems, high gain antennas) and their effect on final aerocapture system design will be discussed. Mass properties will be presented for the system, with mass risks evaluated by margin policy implemented using standard mass properties control.

Andrew Gomez-Delrio↗

Loci/STREAM Sharp Interface Model Validation of Cryogenic Propellant Tank Self-Pressurization

This paper documents a model validation effort for the prediction of cryogenic propellant tank selfpressurization physics using the Loci/STREAM sharp interface CFD model developed at NASA MSFC. Cryogenic fluid management (CFM) applications for long duration spaceflight missions require accurate modeling of heat transfer and thermodynamics. Therefore, detailed validation of those physics is important to ensure simulation accuracy. In the past, the MSFC Propulsion Fluid Dynamics Branch has validated and used the Loci/STREAM Volume of Fluid (VOF) module extensively for propellant slosh applications, which are dominated by fluid motion. For cases where the interface gas/liquid interface is essentially static, the Loci/STREAM sharp interface was developed for more rapid and efficient CFM analysis. In the present study, Loci/STREAM sharp interface simulations were compared with the NASA K-site self-pressurization experiment of a flight weight, partially full, LH2 tank in normal gravity. This study investigated several parametric effects and made a number of important observations on the performance of the Loci/STREAM sharp interface method: - First, a homogeneous model was derived to verify the CFD model. The homogeneous model assumes both gas and liquid phases are uniform and are at saturation temperature. The predicted pressure rise rates at 3.5 W/m2 and 2.0 W/m2 with a 49% fill level are all lower than the experimental measurement. This is expected due to the observed temperature stratification near the gas-liquid interface during testing. - The k-w and k-e turbulence models predict comparable pressurization rates, which are much lower than the experiment measurement. On the other hand, the pressure values and pressurization rates from both models are almost the same as those of the homogeneous model. The current turbulence model is too diffusive and is not capable of capturing the thermal stratification in the liquid and ullage. - When using the laminar flow model, the pressurization rate is found to be very close to the experimental value when a quasi-steady flow field is allowed to develop by continuously venting the tank prior to pressurization as was done during testing. On the other hand, without initial venting, the rate is not constant. Additionally, the development time to reach a quasi-steady flow field differed from the experiment due to the lack of turbulent mixing away from the gas-liquid interface that is expected in reality. - Using the laminar flow model and appropriate initial conditioning, the pressurization rate is within 15% of the experimental value for 49% fill level at 3.5 W/m 2 and is within 18% for 2.0 W/m 2 heat loading. - Using the laminar flow model and appropriate initial conditioning, the pressurization rate is within 18% of the experimental value for a 29% fill level and within 15% for an 83% fill level.

H. Q. Yang↗

Aeroheating Environments of Aerocapture Systems for Uranus Orbiters

Aeroheating environments for an aerocapture system enabling flagship-class science at Uranus are presented. Applicability of a low lift-to-drag entry vehicle aeroshell with flight heritage for Martian entries is considered in the context of an end-to-end Uranus orbiter and probe mission design using aerocapture for orbit insertion. A feasible trajectory space for aerocapture orbit insertion based on various launch opportunities and interplanetary trajectories yield atmosphere-relative entry velocities between 22 km/s and 31 km/s with maximum freestream densities on the order of 10 −5 kg/m 3 . A preliminary study of the aerothermal environments for the entire trajectory space is discussed followed by a more detailed study of the nominal design trajectories. Design conditions are based on laminar, thermochemical nonequilibrium Navier-Stokes flowfield simulations with coupled radiation transport for full lift-up (deep) and lift-down (shallow) design trajectories. Convective heating is found to be the dominant heating mode, with radiation accounting for only 1 % to 5 % of the total heat flux for the design trajectories. The peak design conditions are found to be 422 W/cm 2 for heat flux, 10.5 kPa for pressure, 149 Pa for shear stress, and 88.1 kJ/cm 2 for the total heat load.

Aerocapture↗

Performance Testing of Liquid Hydrogen Tanks

Testing the performance of liquid hydrogen in tanks brings many unique challenges. Often methods used even for liquid nitrogen need to be modified to be able to address the details required to fully understand the performance of the tank. During the development and characterization of many novel insulation systems both for in-space and ground applications, NASA has tested many liquid hydrogen tanks where performance was a key outcome. Over the course of analyzing the performance of multiple different hydrogen tests, including several with both hydrogen and nitrogen, differences in the details of test data interpretation become clear. One of these key details is the thermal stratification of the tank and what it can tell you about the heat load dispersion.

Liquid Hydrogen↗