Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HEIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Solar cycle effects on the structure of the electron density profiles in the dayside ionosphere of Venus

Results are presented of observations from the changes in the electron density structure of the dayside ionosphere of Venus that were brought about by changing solar activity. The ionopause height is generally low for values of the solar zenith angle below about 50 deg regardless of the phase in the solar cycle. At solar maximum, and at times of intermediate solar activity, the ionopause height for solar zenith angles greater than about 50 deg is highly variable, ranging from a minimum of about 200 km to a maximum of more than 1000 km. At times of solar minimum the great majority of all ionopause heights for all solar zenith angles are uniformly low, lying between 200 and 300 km. It is argued that the compressed nature of the Venus atmosphere at solar minimum is produced by permeation of the ionosphere by the solar wind magnetic field, which occurs when the solar wind dynamic pressure exceeds the ionospheric plasma pressure.

Kliore, Arvydas J.↗
NASA NTRS1992

Local distribution of old neutron stars

The local distribution of old disk neutron stars is approximated with a 1D model, in which the steady state distribution in the direction perpendicular to the Galactic plane is calculated, assuming a variety of the initial radio pulsar positions and velocities, and various Galactic potentials. It is found that the local distribution of old neutron stars is dominated by those that were born with very low velocities. The high-velocity neutron stars spend most of their lifetime far in the Galactic halo and do not contribute much to the local density. Therefore, the rms velocity at birth is not a good indicator of the scale height of the old population. The most likely half-density scale height for the old disk neutron stars is approximately 350 pc, the same as for the old disk G, K, and M stars. If gamma-ray bursts originate on old disk neutron stars, then 350 pc should also be the scale height for the bursters.

Frei, Szolt↗
NASA NTRS1992

Cloud-property retrieval using merged HIRS and AVHRR data

A technique is developed that uses a multispectral, multiresolution method to improve the overall retrieval of mid- to high-level cloud properties by combining HIRS sounding channel data with higher spatial resolution AVHRR radiometric data collocated with the HIRS footprint. Cirrus cloud radiative and physical properties are determined using satellite data, surface-based measurements provided by rawinsondes and lidar, and aircraft-based lidar data collected during the First International Satellite Cloud Climatology Program Regional Experiment in Wisconsin during the months of October and November 1986. HIRS cloud-height retrievals are compared to ground-based lidar and aircraft lidar when possible. Retrieved cloud heights are found to have close agreement with lidar for thin cloud, but are higher than lidar for optically thick cloud. The results of the reflectance-emittance relationships derived are compared to theoretical scattering model results for both water-droplet spheres and randomly oriented hexagonal ice crystals. It is found that the assumption of 10-micron water droplets is inadequate to describe the reflectance-emittance relationship for the ice clouds seen here. Use of this assumption would lead to lower cloud heights using the ISCCP approach. The theoretical results show that use of hexagonal ice crystal phase functions could lead to much improved results for cloud retrieval algorithms using a bispectral approach.

Baum, Bryan A.↗
NASA NTRS1983

Proportional counters as low energy photon detectors

We investigated the response of an argon-methane proportional counter to monochromatic X-rays in the range 99 to 277 eV. The apparent nonlinearities in mean pulse height as a function of photon energy and the detailed shape of the pulse height distribution for each energy can be predicted quite precisely using the extensive atomic data available for argon. Based on this understanding, we propose a semi-empirical system for using a limited amount of calibration data to predict the full response of counters employing less well-characterized gases. Such accurate models of proportional counters are required to maximize the spectral information that can be derived from observed pulse height distributions.

Jahoda, Keith↗
NASA NTRS1992

Finite amplitude gravity waves in the Venus atmosphere generated by surface topography

A two-dimensional, fully nonlinear, nonhydrostatic, gravity wave model is used to study the evolution of gravity waves generated near the surface of Venus. The model extends from near the surface to well above the cloud layers. Waves are forced by applying a vertical wind at the bottom boundary. The boundary vertical wind is determined by the product of the horizontal wind and the gradient of the surface height. When wave amplitudes are small, the near-surface horizontal wind is the zonally averaged basic-state zonal wind, and the length scales of the forcing that results are characteristic of the surface height variation. When the forcing becomes larger and wave amplitudes affect the near-surface horizontal wind field, the forcing spectrum becomes more complicated, and a spectrum of waves is generated that is not a direct reflection of the spectrum of the surface height variation. Model spatial resolution required depends on the amplitude of forcing; for very nonlinear cases considered, vertical resolution was 250 m, and horizontal resolution was slightly greater than 1 km. For smaller forcing amplitudes, spatial resolution was much coarser, being 1 km in the vertical and about 10 km in the horizontal. Background static stability and mean wind are typical of those observed in the Venus atmosphere.

Young, R. E.↗
NASA NTRS1992

Experimental observation of the influence of furnace temperature profile on convection and segregation in the vertical Bridgman crystal growth technique

Azulene-doped naphthalene was directionally solidified during the vertical Bridgman-Stockbarger technique. Doping homogeneity and convection were determined as a function of the temperature profile in the furnace and the freezing rate. Convection velocities were two orders of magnitude lower when the temperature increased with height. Rarely was the convection pattern axisymmetric, even though the temperature varied less than 0.1 K around the circumference of the growth ampoule. Correspondingly the cross sectional variation in azulene concentration tended to be asymmetric, especially when the temperature increased with height. This cross sectional variation changed dramatically along the ingot, reflecting changes in convection presumably due to the decreasing height of the melt. Although there was large scatter and irreproducibility in the cross sectional variation in doping, this variation tended to be least when the growth rate was low and the convection was vigorous. It is expected that compositional variations would also be small at high growth rates with weak convection and flat interfaces, although this was not investigated in the present experiments. Neither rotation of the ampoule nor deliberate introduction of thermal asymmetries during solidification had a significant influence on cross sectional variations in doping. It is predicted that slow directional solidification under microgravity conditions could produce greater inhomogeneities than on Earth. Combined use of microgravity and magnetic fields would be required to achieve homogeneity when it is necessary to freeze slowly in order to avoid constitutional supercooling.

Neugebauer, G. T.↗
NASA NTRS1992

Planar doped barrier subharmonic mixers

The Planar Doped Barrier (PDB) diode is a device consisting of a p(+) doping spike between two intrinsic layers and n(+) ohmic contacts. This device has the advantages of controllable barrier height, diode capacitance and forward to reverse current ratio. A symmetrically designed PDB has an anti-symmetric current vs. voltage characteristic and is ideal for use as millimeter wave subharmonic mixers. We have fabricated such devices with barrier heights of 0.3, 0.5 and 0.7 volts from GaAs and InGaAs using a multijunction honeycomb structure with junction diameters between one and ten microns. Initial RF measurements are encouraging. The 0.7 volt barrier height 4 micron GaAs devices were tested as subharmonic mixers at 202 GHz with an IF frequency of 1 GHz and had 18 dB of conversion loss. The estimated mismatch loss was 7 dB and was due to higher diode capacitance. The LO frequency was 100.5 GHz and the pump power was 8 mW.

Lee, T. H.↗
NASA NTRS1992

The topography of impact craters in 'softened' terrain on Mars

The technique of photoclinometry is applied here to Viking orbiter images of Mars in order to derive topographic profiles across Martian craters on both softened and unsoftened terrain. The results demonstrate that craters on the two kinds of terrain are in fact topographically distinct. Both simple and complex softened craters are characterized by more convex-upward crater walls than are unsoftened craters, and both simple and complex softened craters have rounder crater rims. Softened complex craters have modestly smaller crater depths than unsoftened complex craters. Both the rim heights and bowl depths are reduced, with the rim heights reduced more. Softened simple craters have much smaller crater depths than unsoftened simple craters. Both the rim heights and bowl depths are reduced, with the bowl depths reduced more.

Jankowski, David G.↗
NASA NTRS1991

Three-component laser velocimeter surveys of the flow over a backward-facing step

A three-component laser velocimeter is used to investigate the flow over a backward-facing step. The backward-facing step had an expansion ratio of 2, a boundary layer height to step height ratio of 0.34 and a Reynolds number based on step height of 19,000. Results from three-component velocimeter surveys of the flow over the backward-facing step are presented with comparisons of the current experiment with previous experiments and computational results. The present results compared well with previous experiments with the exception of the reattachment length. The short reattachment length was due to the short length of the channel downstream. The measurement of the lateral velocity component showed that there is a mean flow in and out of the centerline plane as high as 7 percent of the freestream velocity. However, the shear stresses show no correlation between the lateral fluctuations and the longitudinal and vertical fluctuations, indicating that the flow is 2D in terms of the turbulence quantities.

Kjelgaard, Scott O.↗
NASA NTRS1993

Dynamical response of the tropical total ozone to sea surface temperature changes

Interannual variations of total ozone in the equatorial region are discussed in terms of the lower-stratospheric dynamical processes associated with sea surface temperature (SST) changes on an El Nino-Southern Oscillation time scale. Tropospheric diabatic heating by the latent heat release in convective systems drives the interannual variations of tropopause height and atmospheric vertical motions. The adiabatic cooling associated with the dynamically forced ascending motion is subject to radiative heating, which further extends the upwelling motion into the stratosphere. SST variations can thus influence total ozone amounts by changing the tropopause height and vertical advection through modulation of tropospheric diabatic heating. Mechanistic relationships that describe total ozone fluctuations through the advection effect and the tropopause effect of SST variations are derived using the equivalent potential temperature. Total ozone fluctuations are estimated using a quantitative formulation of these mechanistic equations together with the observed SST data. These results indicate that the interannual variations of the zonal wave component of equatorial total ozone are governed by the tropopause effect of SST variations. Preliminary investigation suggests that the annual cycle of tropical total ozone is coupled to the tropopause height changes under the influence of the planetary wave-induced lower-stratospheric temperature rather than local SST.

Hasebe, Fumio↗
NASA NTRS1993

Gravity wave forcing in the middle atmosphere due to reduced ozone heating during a solar eclipse

We present an analysis of the gravity wave structure and the associated forcing of the middle atmosphere induced by the screening of the ozone layer from solar heating during a solar eclipse. Fourier integral techniques and numerical evaluation of the integral solutions were used to assess the wave field structure and to compute the gravity wave forcing of the atmosphere at greater heights. Our solutions reveal dominant periods of a few hours, characteristic horizontal and vertical scales of about 5000 to 10,000 km and 200 km, respectively, and an integrated momentum flux in the direction of eclipse motion of about 5.6 x 10 exp 8 N at each height above the forcing level. These results suggest that responses to solar eclipses may be difficult to detect above background gravity wave and tidal fluctuations until well into the thermosphere. Conversely, the induced body forces may penetrate to considerable heights because of the large wave scales and will have significant effects at levels where the wave field is dissipated.

Fritts, David C.↗
NASA NTRS1993

Baroclinic neutrality and the tropopause

It is noted that the atmosphere has a baroclinically neutral state that permits strong temperature gradients at the ground. In this state, the concentrated potential vorticity gradient at the ground is separated from the concentrated potential vorticity gradient at the tropopause by a region where the potential vorticity gradient is zero. The resulting basic state is analogous to the basic state in the Eady problem. A minimum meridional wavenumber is established by the width of the subtropical jet, and neutrality is established by moving the tropopause to a sufficient height so that the total wavenumber corresponds to the short-wave cutoff in the Eady problem. The resulting height is approximately the observed tropopause height.

Lindzen, Richard S.↗
NASA NTRS1990

On cloud altitude determinations from High Resolution Interferometer Sounder (HIS) observations

High Spectral Resolution Interferometer Spectrometer (HIS) data are used with simultaneous airborne lidar data to investigate the accuracy of cloud height determinations using the 'COz slicing method'. It is shown that the accuracy of cirrus cloud heights are greatly improved as the spectral resolution and coverage is increased. Since next generation infrared temperature and moisture sounders will yield high spectral resolution with quasicontinuous spectral coverage, improved cloud height accuracies achieved from these sensors will improve soundings in clouded areas and will also improve our global cloud climatology.

Smith, William L.↗
NASA NTRS1993

Inference of cirrus cloud properties using satellite-observed visible and infrared radiances. II - Verification of theoretical cirrus radiative properties

The study presents a methodology developed to apply a parameterization of radiative transfer calculations to satellite analyses of cirrus clouds. Cloud heights and optical depths are derived from visible and IR window measurements taken during FIRE when cirrus clouds were present. Geostationary satellite retrievals are compared to lidar-derived cloud heights and retrievals from a polar-orbiting satellite taken at different angles to determine which theoretical models of scattering phase function and single-scattering albedo best represent actual cirrus clouds. Models using small scattering phase function and single-scattering albedo best represent actual cirrus clouds. It is concluded that interpretation of cirrus reflectance with water-droplet models leads to biased results. The cloud-height and optical depth biases can be minimized with the aid of the C20 or cirrostratus models.

Minnis, Patrick↗
NASA NTRS1993

Gravity wave and tidal structures between 60 and 140 km inferred from space shuttle reentry data

This study presents an analysis of density measurements made using high-resolution accelerometers aboard several space shuttles at altitudes from 60 to 140 km during reentry into the earth's atmosphere. The observed density fluctuations are interpreted in terms of gravity waves and tides and provide evidence of the importance of such motions well into the thermosphere. Height profiles of fractional density variance reveal that wave amplitudes increase at a rate consistent with observations at lower levels up to about 90 km. The rate of amplitude growth decreases at greater heights, however, and appears to cease above about 110 km. Wave amplitudes are nevertheless large at these heights and suggest that gravity waves may play an important role in forcing of the lower thermosphere.

Fritts, David C.↗
NASA NTRS1992

Measurement of pressure ridges in SAR images of sea ice - Preliminary results on scattering theory

Sea ice ridges and keels (hummocks and bummocks) are important in sea ice research for both scientific and practical reasons. A long-term objective is to make quantitative measurements of sea ice ridges using synthetic aperture radar (SAR) images. The preliminary results of a scattering model for sea ice ridge are reported. The approach is through the ridge height variance spectrum Psi(K), where K is the spatial wavenumber, and the two-scale scattering model. The height spectrum model is constructed to mimic height statistics observed with an airborne optical laser. The spectrum model is used to drive a two-scale scattering model. Model results for ridges observed at C- and X-band yield normalized radar cross sections that are 10 to 15 dB larger than the observed cross sections of multiyear ice over the range of angles of incidence from 10 to 70 deg.

Vesecky, J. F.↗
NASA NTRS1993

Eddy and wave dynamics in the South Atlantic as diagnosed from Geosat altimeter data

The characteristics of the sea surface height variability in the South Atlantic are investigated on the basis of almost 3 yr of Geosat data. The nature of the sea surface height field is shown to be nonstationary, heterogeneous, and anisotropic. The wavenumber spectral characteristics of the sea surface height field, such as spectral slopes, shape, breaks in spectral slopes, and energy density values, vary with latitude and longitude within the basin. The spectral slopes exhibit a spectral dependence approaching k exp -5 in the high-energy areas and k exp -3 in the low-energy areas. Along-track characteristic wavelengths are found to decrease from north to south and from west to east. The energy exhibits maximum values in the highly energetic eddy-shedding regions of the Malvinas-Brazil confluence and the Agulhas leakage region.

Forbes, Cristina↗
NASA NTRS1985

Balloon-based interferometric techniques

A balloon-borne triple-etalon Fabry-Perot Interferometer, observing the Doppler shifts of absorption lines caused by molecular oxygen and water vapor in the far red/near infrared spectrum of backscattered sunlight, has been used to evaluate a passive spaceborne remote sensing technique for measuring winds in the troposphere and stratosphere. There have been two successful high altitude balloon flights of the prototype UCL instrument from the National Scientific Balloon Facility at Palestine, TE (May 80, Oct. 83). The results from these flights have demonstrated that an interferometer with adequate resolution, stability and sensitivity can be built. The wind data are of comparable quality to those obtained from operational techniques (balloon and rocket sonde, cloud-top drift analysis, and from the gradient wind analysis of satellite radiance measurements). However, the interferometric data can provide a regular global grid, over a height range from 5 to 50 km in regions of clear air. Between the middle troposphere (5 km) and the upper stratosphere (40 to 50 km), an optimized instrument can make wind measurements over the daylit hemisphere with an accuracy of about 3 to 5 m/sec (2 sigma). It is possible to obtain full height profiles between altitudes of 5 and 50 km, with 4 km height resolution, and a spatial resolution of about 200 km, along the orbit track. Below an altitude of about 10 km, Fraunhofer lines of solar origin are possible targets of the Doppler wind analysis. Above an altitude of 50 km, the weakness of the backscattered solar spectrum (decreasing air density) is coupled with the low absorption crosssection of all atmospheric species in the spectral region up to 800 nm (where imaging photon detectors can be used), causing the along-the-track resolution (or error) to increase beyond values useful for operational purposes. Within the region of optimum performance (5 to 50 km), however, the technique is a valuable potential complement to existing wind measuring systems and can provide a low cost addition to powerful active (LIDAR) wind measuring systems now under development.

Rees, David↗