SEARCH · Engineering Papers

Results for “Generator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Experimental parametric study of jet vortex generators for flow separation control

A parametric wind-tunnel study was performed with jet vortex generators to determine their effectiveness in controlling flow separation associated with low-speed turbulence flow over a two-dimensional rearward-facing ramp. Results indicate that flow-separation control can be accomplished, with the level of control achieved being a function of jet speed, jet orientation (with respect to the free-stream direction), and orifice pattern (double row of jets vs. single row). Compared to slot blowing, jet vortex generators can provide an equivalent level of flow control over a larger spanwise region (for constant jet flow area and speed). Dye flow visualization tests in a water tunnel indicated that the most effective jet vortex generator configurations produced streamwise co-rotating vortices.

Selby, Gregory↗

NASA NTRS1991

Digital test signal generation: An accurate SNR calibration approach for the DSN

A new method of generating analog test signals with accurate signal to noise ratios (SNRs) is described. High accuracy will be obtained by simultaneous generation of digital noise and signal spectra at a given baseband or bandpass limited bandwidth. The digital synthesis will provide a test signal embedded in noise with the statistical properties of a stationary random process. Accuracy will only be dependent on test integration time with a limit imposed by the system quantization noise (expected to be 0.02 dB). Setability will be approximately 0.1 dB. The first digital SNR generator to provide baseband test signals is being built and will be available in early 1991.

Gutierrez-Luaces, B. O.↗

NASA NTRS1988

The next generation

The next generation of computer systems are studied by examining the processes and methodologies. The present generation is ok for small projects, but not so good for large projects. They are not good for addressing the iterative nature of requirements, resolution, and implementation. They do not address complexity issues of requirements stabilization. They do not explicitly address reuse opportunities, and they do not help with people shortages. Therefore, there is a need to define and automate improved software engineering processes. Some help may be gained by reuse and prototyping, which are two sides of the same coin. Reuse library parts are used to generate good approximations to desired solutions, i.e., prototypes. And rapid prototype composition implies use of preexistent parts, i.e., reusable parts.

Yudkin, Howard↗

NASA NTRS1991

Generation and use of unstructured grids for turbomachinery calculations

A wavefront mesh generator for two dimensional triangular meshes as well as a brief description of the solution method used with these meshes are presented. The interest is in creating meshes for solving the equations of fluid mechanics in complex turbomachinery problems, although the mesh generator and flow solver may be used for a larger variety of applications. The focus is on the flexibility and power of the mesh generation method for triangulating extremely complex geometries and in changing the geometry to create a new mesh. Two turbomachinery applications are presented which take advantage of this method: the analysis of pylon/strut and pylon/OGV interaction in the bypass of a turbofan.

Lindquist, Dana R.↗

NASA NTRS1991

Detonation duct gas generator demonstration program

The feasibility of the generation of detonation waves moving periodically across high speed channel flow is experimentally demonstrated. Such waves are essential to the concept of compressing requirements and increasing the engine pressure compressor with the objective of reducing conventional compressor requirements and increasing the engine thermodynamic efficiency through isochoric energy addition. By generating transient transverse waves, rather than standing waves, shock wave losses are reduced by an order of magnitude. The ultimate objective is to use such detonation ducts downstream of a low pressure gas turbine compressor to produce a high overall pressure ratio thermodynamic cycle. A 4 foot long, 1 inch x 12 inch cross-section, detonation duct was operated in a blow-down mode using compressed air reservoirs. Liquid or vapor propane was injected through injectors or solenoid valves located in the plenum or the duct itself. Detonation waves were generated when the mixture was ignited by a row of spark plugs in the duct wall. Problems with fuel injection and mixing limited the air speeds to about Mach 0.5, frequencies to below 10 Hz, and measured pressure ratios of about 5 to 6. The feasibility of the gas dynamic compression was demonstrated and the critical problem areas were identified.

Wortman, Andrew↗

NASA NTRS1991

Generation of topographic terrain models utilizing synthetic aperture radar and surface level data

Topographical terrain models are generated by digitally delineating the boundary of the region under investigation from the data obtained from an airborne synthetic aperture radar image and surface elevation data concurrently acquired either from an airborne instrument or at ground level. A set of coregistered boundary maps thus generated are then digitally combined in three dimensional space with the acquired surface elevation data by means of image processing software stored in a digital computer. The method is particularly applicable for generating terrain models of flooded regions covered entirely or in part by foliage.

Imhoff, Marc L.↗

NASA NTRS1991

Horizontal fields generated by return strokes

Horizontal fields generated by return strokes play an important role in the interaction of lightning generated electric fields with power lines. In many of the recent investigations on the interaction of lightning electromagnetic fields with power lines, the horizontal field was calculated by employing the expression for the tilt of the electric field of a plane wave propagating over finitely conducting earth. The method is suitable for calculating horizontal fields generated by return strokes at distances as close as 200m. At these close ranges, the use of the wavetilt expression can cause large errors.

Cooray, Vernon↗

NASA NTRS1990

Generation of dynamo magnetic fields in thin Keplerian disks

The combined action of nonuniform rotation and helical convection in protoplanetary disks, in the Galaxy, or in accretion disks surrounding black holes and other compact objects, enables an alpha-omega dynamo to generate a large-scale magnetic field. In this paper, the properties of such magnetic fields are investigated using a two-dimensional, partially numerical method. The structures of the lowest-order steady state and oscillatory modes are calculated for two kinds of external boundary conditions. A quadruple, steady state, highly localized mode is the most easily excited for low values of the dynamo number. The results indicate that, except under special conditions, disk dynamo modes tend to consist of relatively localized rings structures. For large values of the dynamo number, the magnetic field consists of a number of quasi-independent, spatially localized modes generated in various concentric rings filling the disk inward of a dynamo generation 'front'.

Stepinski, T. F.↗

NASA NTRS1991

Parallel unstructured grid generation

A parallel unstructured grid generation algorithm is presented and implemented on the Hypercube. Different processor hierarchies are discussed, and the appropraite hierarchies for mesh generation and mesh smoothing are selected. A domain-splitting algorithm for unstructured grids which tries to minimize the surface-to-volume ratio of each subdomain is described. This splitting algorithm is employed both for grid generation and grid smoothing. Results obtained on the Hypercube demonstrate the effectiveness of the algorithms developed.

Loehner, Rainald↗

NASA NTRS1990

Surface definition and grid generation about an Assured Crew Return Vehicle (ACRV) for Space Station Freedom

The surface definition and grid generation about an Assured Crew Return Vehicle (ACRV) for the Space Station Freedom are described. The purpose of the surface definition and grid generation is to provide the necessary geometry information for CFD calculations about the vehicle. There are two salient features in this description. The first is that the numerical model representing the ACRV configuration is obtained from the measurement of an existing wind tunnel model. The method for smoothing the measured data and obtaining the numerical model is described. The second feature is the description of the algebraic grid generation method and software to compute volume grids about the ACRV. The methods and software allow rapid computation of volume grids for a wide range of flow conditions.

Smith, R. E.↗

NASA NTRS1992

More About Generating Three-Dimensional Grids About Anything

Report presents additional details of mathematical basis and potential applications of method of generating three-dimensional grids fitted to bodies having arbitrary, complicated shapes. Grids used in finite-difference or finite-volume computations of flows around bodies. Grid-generation method involves numerical solutions of Poisson's equations described in "Generating Three-Dimensional Grids About Anything" (ARC-12620).

Sorenson, Reese L.↗

NASA NTRS1991

Jet noise generated by large-scale coherent motion

The noise generated by large scale turbulence structures and instability waves of jets is discussed. Emphasis is placed on supersonic jets with moderate to high Reynolds numbers. This is because it is in these jets that unambiguous experimental and theoretical evidence is found indicating that large turbulence structures and instability waves are directly responsible for generating the dominant part of the noise. For subsonic jets similar large turbulence structures and instability waves do play a crucial role in the dynamics, spread, and mixing of the jet fluid. However, at subsonic convection speeds, they do not appear to be efficient noise generators. Many investigators believe that the dominant noise source of subsonic jets is, in fact, the small scale turbulence. As yet, this belief has not yet received universal acceptance. The issues involved are complicated and are not easy to resolve.

Tam, Christopher K. W.↗

NASA NTRS1991

The spatial distribution and time evolution of impact-generated magnetic fields

The production of magnetic fields was revealed by laboratory hypervelocity impacts in easily vaporized targets. As quantified by pressure measurements, high frame-rate photography, and electrostatic probes, these impacts tend to produce large quantities of slightly ionized vapor, which is referred to as impact-generated plasma. Nonaligned electron density and temperature gradients within this plasma may lead to production of the observed magnetic fields. Past experiments were limited to measuring a single component of the impact-generated magnetic fields at only a few locations about the developing impact crater and consequently gave little information about the field production mechanism. To understand this mechanism, the techniques were extended to map the three components of the magnetic field both in space and time. By conducting many otherwise identical experiments with arrayed magnetic detectors, a preliminary 3-D picture was produced of impact-generated magnetic fields as they develop through time.

Crawford, D. A.↗

NASA NTRS1991

Studies of aerothermal loads generated in regions of shock/shock interaction in hypersonic flow

Experimental studies were conducted to examine the aerothermal characteristics of shock/shock/boundary layer interaction regions generated by single and multiple incident shocks. The presented experimental studies were conducted over a Mach number range from 6 to 19 for a range of Reynolds numbers to obtain both laminar and turbulent interaction regions. Detailed heat transfer and pressure measurements were made for a range of interaction types and incident shock strengths over a transverse cylinder, with emphasis on the 3 and 4 type interaction regions. The measurements were compared with the simple Edney, Keyes, and Hains models for a range of interaction configurations and freestream conditions. The complex flowfields and aerothermal loads generated by multiple-shock impingement, while not generating as large peak loads, provide important test cases for code prediction. The detailed heat transfer and pressure measurements proved a good basis for evaluating the accuracy of simple prediction methods and detailed numerical solutions for laminar and transitional regions or shock/shock interactions.

Holden, Michael S.↗

NASA NTRS1991

Generating target system specifications from a domain model using CLIPS

The quest for reuse in software engineering is still being pursued and researchers are actively investigating the domain modeling approach to software construction. There are several domain modeling efforts reported in the literature and they all agree that the components that are generated from domain modeling are more conducive to reuse. Once a domain model is created, several target systems can be generated by tailoring the domain model or by evolving the domain model and then tailoring it according to the specified requirements. This paper presents the Evolutionary Domain Life Cycle (EDLC) paradigm in which a domain model is created using multiple views, namely, aggregation hierarchy, generalization/specialization hierarchies, object communication diagrams and state transition diagrams. The architecture of the Knowledge Based Requirements Elicitation Tool (KBRET) which is used to generate target system specifications is also presented. The preliminary version of KBRET is implemented in the C Language Integrated Production System (CLIPS).

Sugumaran, Vijayan↗

NASA NTRS1992

GENSURF: A mesh generator for 3D finite element analysis of surface and corner cracks in finite thickness plates subjected to mode-1 loadings

A computer program that generates three-dimensional (3D) finite element models for cracked 3D solids was written. This computer program, gensurf, uses minimal input data to generate 3D finite element models for isotropic solids with elliptic or part-elliptic cracks. These models can be used with a 3D finite element program called surf3d. This report documents this mesh generator. In this manual the capabilities, limitations, and organization of gensurf are described. The procedures used to develop 3D finite element models and the input for and the output of gensurf are explained. Several examples are included to illustrate the use of this program. Several input data files are included with this manual so that the users can edit these files to conform to their crack configuration and use them with gensurf.

Raju, I. S.↗

NASA NTRS1990

Application of three-dimensional Bezier patches in grid generation

Bezier and B-spline patches are popular tools in surface modeling. With these methods, a surface is represented by the tensor product of univariate approximations. The extension of this concept to three dimensions is obvious and can be applied to the problem of grid generation. This report will demonstrate how three dimensional patches can be used in solid modeling and in the generation of grids. Examples will be given demonstrating the ability to generate three dimensional grids directly from a wire frame without having to first set up the boundary surfaces. Many geometric grid properties can be imposed by the proper choice of the control net.

Mastin, C. Wayne↗

NASA NTRS1992

Application of three-dimensional Bezier patches in grid generation

Bezier and B-spline patches are popular tools in surface modeling. With these methods, a surface is represented by the tensor product of univariate approximations. The extension of this concept to three-dimensions is obvious and can be applied to the problem of grid generation. This report will demonstrate how three-dimensional patches can be used in solid modeling and in the generation of grids. Examples will be given demonstrating the ability to generate three-dimensional grids directly from a wire frame without having to first set up the boundary surfaces. Many geometric grid properties can be imposed by the proper choice of the control net.

Mastin, C. Wayne↗