Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Generative Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Advanced High-Fidelity Lumped EMT Grid Modelling & Comparison

There is increased interest in performing electromagnetic transient (EMT) studies of large power grids for stability purposes. The large power grids may not represent the entire grid, but portions of interest. For example, studies are being performed to identify the impact of extreme events on solar power plants in California that requires the EMT model of the grid in California, but not the complete western interconnection (WI) grid model to which the grid in California is connected. The EMT models of grids are necessary to perform integration studies of large power electronics systems like utility-scale photovoltaic (PV) systems, high-voltage direct current (HVdc) systems, flexible alternating current transmission systems (FACTs), and others. Traditionally, models of grids available to utilities are the transient stability (TS) models. Hence, it assumes significance to identify methods of developing high-fidelity EMT models for portions of the grid (of interest) from the information available in the existing TS models of the entire grid. In this paper, a conversion mechanism along with upgradation based on data-driven methods is applied to develop EMT models of grids. The conversion mechanism utilizes information from TS models of grids to generate EMT models of grids. These models can be extracted for the required portion of the grid. While these models adequately represent the local voltage behaviour of the grid, they are inadequate in representing the frequency behaviour of the grid. The data-driven methods are applied to identify frequency dynamics of the grid, and the EMT models are upgraded with the data-driven methods. The resulting upgraded EMT models of grids can perform the studies mentioned above. These models are tested under contingencies of interest to validate the developed models.

Debnath, Suman↗

Probabilistic wave parameters for WEC survival analysis at US Navy's Wave Energy Test Site in Hawaii.

The persistent and diversified wave conditions make the Navy's Wave Energy Test Site (WETS) at Marine Corps Base Hawaii, a suitable place for WEC testing. Hurricane waves, despite their infrequent occurrence, pose a challenge to the survivability of the devices. We utilized 252 hurricane scenarios within 200 km of WETS from downscaling simulations of a climate model and the third generation spectral model WaveWatch III to produce a range of severe wave conditions at WETS. The computed wave height presented as a function of annual exceedance probability enables a risk-based survival analysis of WECs. This study provides a proof-of-concept of the probabilistic approach and a baseline for analysis of hurricane wave conditions under the present and future climate projections.

16 TIDAL AND WAVE POWER↗

3D Geophysical Inversion Modeling of Ground Magnetic Data at Baker Hot Springs, Washington State, USA

Ground-based magnetic survey data were geophysically modelled in 3D as part of a play fairway exploration program at Baker hot springs. Here, a multi-step inversion method was used to address the issue of remanent magnetization in rocks of the study area. The geophysical modelling effort generated an effective susceptibility model that displays the 3D distribution and orientation of magnetization in the subsurface. Importantly, the magnetic modelling effort found that a strong, dipolar magnetic anomaly observed in the study area can be explained by a remanently magnetized body that is ~1¼ km long x ~200 m wide and extends from ~25-400 m below the surface. Geologically, this body may represent 1) an intrusion of reversely magnetized mafic rocks or 2) a magnetite-bearing fault zone. This rock body coincides spatially with Baker hot springs; the margins of this body or the fault structures within it are likely responsible for providing the permeability that gives rise to the hot springs.

Baker hot springs↗

Snowmass2021 Computational Frontier White Paper: Cosmological Simulations and Modeling

Powerful new observational facilities will come online over the next decade, enabling a number of discovery opportunities in the "Cosmic Frontier", which targets understanding of the physics of the early universe, dark matter and dark energy, and cosmological probes of fundamental physics, such as neutrino masses and modifications of Einstein gravity. Synergies between different experiments will be leveraged to present new classes of cosmic probes as well as to minimize systematic biases present in individual surveys. Success of this observational program requires actively pairing it with a well-matched state-of-the-art simulation and modeling effort. Next-generation cosmological modeling will increasingly focus on physically rich simulations able to model outputs of sky surveys spanning multiple wavebands. These simulations will have unprecedented resolution, volume coverage, and must deliver guaranteed high-fidelity results for individual surveys as well as for the cross-correlations across different surveys. The needed advances are as follows: (1) Development of scientifically rich and broadly-scoped simulations, which capture the relevant physics and correlations between probes (2) Accurate translation of simulation results into realistic image or spectral data to be directly compared with observations (3) Improved emulators and/or data-driven methods serving as surrogates for expensive simulations, constructed from a finite set of full-physics simulations (4) Detailed and transparent verification and validation programs for both simulations and analysis tools. (Abridged)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Resonant production of the sterile neutrino dark matter and fine-tunings in the neutrino minimal standard model

The generation of lepton asymmetry below the electroweak scale has a considerable impact on production of dark matter sterile neutrinos. Oscillations or decays of the heavier sterile neutrinos in the neutrino minimal standard model can give rise to the requisite lepton asymmetry, provided the masses of the heavier neutrinos are sufficiently degenerate. We study the renormalization group evolution of the mass difference of these singlet fermions to understand the degree of necessary fine-tuning. We construct an example of the model that can lead to a technically natural realization of this low-energy degeneracy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probabalistic Risk Analysis and Thermal Margin Process for an Inflatable Aeroshell

Uncertainties always exist in atmospheric entry aeroheating environments and the thermal response of thermal protection system (TPS) material. These uncertainties are mitigated in the design by ap-plying margin and factors of safety to the TPS. Entry vehicle TPS is often conservatively over-sized for the heat loads that are experienced along the entry trajectory by stacking worst-case scenarios together. Additionally, the current TPS design and margin process used by NASA offers very little insight into the risk of over-temperature during flight and the reliability of the heat shield performance [1,3]. A probabilistic margin process can be used to calculate the amount of TPS margin necessary to survive a given entry heat load at a specified level of risk [2,3,4]. The vehicle’s initial entry state (entry velocity, flight path angle, and entry mass) determines the expected atmospheric entry environmental conditions and resulting heat load that the entry vehicle will experience. If there is flexibility in the entry state, then this process can be used to select an appropriate combination of entry state parameters and TPS size to target a desired reentry reliability. This probabilistic margin process allows engineers to make informed aeroshell design, entry-trajectory design, and TPS performance risk trades while preventing excessive TPS margin from being applied. The probabilistic TPS margin process has been performed to determine TPS thickness and entry heating constraints given an acceptable risk level for the Low Earth Orbit Flight Experiment of an Inflatable Decelerator (LOFTID) flight project. The process is used in a manner to size the entry heat load for a given flexible TPS (FTPS) thickness so that it meets project reliability standards while allowing the FTPS and the underlying inflatable structure (IS) to be pushed to adequately high temperatures. Since the LOFTID project is an experimental flight demonstration, it is de-sired to drive the FTPS and IS to temperatures that cover a large range of their thermal response models’ applicability. This will allow the thermal response models to be better improved and validated post-flight using LOFTID’s extensive instrumentation embedded within the aeroshell. The presentation demonstrates how uncertainty analysis is carried out using an end-to-end Monte Carlo process where three separate Monte Carlo simulations are run in sequence. The first Monte Carlo simulation operates on the entry trajectory model to generate trajectory parameter dispersions that are fed into the second Monte Carlo simulation. The second Monte Carlo simulation operates on the aerothermodynamics model to generate aeroheating parameter dispersions that are fed into the third Monte Carlo simulation. The third Monte Carlo simulation operates on the FTPS material thermal response model to generate the final FTPS/IS thermal response dispersions. The end-to-end Monte Carlo simulation propagates the uncertainties of each model into the next to quantify the resulting uncertainty of the FTPS/IS thermal response. The fractional contributions of the uncertain parameters in the trajectory, aerothermal, and thermal response models to the variance in the FTPS/IS thermal response is determined as a byproduct of the Monte Carlo analysis. The structural uncertainty of the FTPS thermal response model is evaluated by flight relevant ground testing and model error analysis using test measurements. This probabilistic TPS margin process had never been applied to an entry vehicle and it is one of the LOFTID project’s goals to demonstrate its merits.

Steven A. Tobin↗

Context for interpreting equilibrium climate sensitivity and transient climate response from the CMIP6 Earth system models

For the current generation of earth system models participating in the Coupled Model Intercomparison Project Phase 6 (CMIP6), the range of equilibrium climate sensitivity (ECS, a hypothetical value of global warming at equilibrium for a doubling of CO 2 ) is 1.8°C to 5.6°C, the largest of any generation of models dating to the 1990s. Meanwhile, the range of transient climate response (TCR, the surface temperature warming around the time of CO 2 doubling in a 1% per year CO 2 increase simulation) for the CMIP6 models of 1.7°C (1.3°C to 3.0°C) is only slightly larger than for the CMIP3 and CMIP5 models. Here we review and synthesize the latest developments in ECS and TCR values in CMIP, compile possible reasons for the current values as supplied by the modeling groups, and highlight future directions. Cloud feedbacks and cloud-aerosol interactions are the most likely contributors to the high values and increased range of ECS in CMIP6.

54 ENVIRONMENTAL SCIENCES↗

Secondary instability of electromagnetic ion-temperature-gradient modes for zonal flow generation

An analytical model for zonal flow generation by toroidal ion-temperature-gradient (ITG) modes, including finite {beta} electromagnetic effects, is derived. The derivation is based on a fluid model for ions and electrons and takes into account both linear and nonlinear {beta} effects. The influence of finite plasma {beta} on the zonal flow growth rate ({gamma}{sub ZF}) scaling is investigated for typical tokamak plasma parameters. The results show the importance of the zonal flows close to marginal stability where {gamma}{sub ZF}/{gamma}{sub ITG} >> 1 is obtained. In this region the parameter {gamma}{sub ZF}/{gamma}{sub ITG} increases with {beta}, indicating that the ITG turbulence and associated transport would decrease with {beta} at a faster rate than expected from a purely linear or quasi-linear analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fault diagnosis for the Space Shuttle main engine

A conceptual design of a model-based fault detection and diagnosis system is developed for the Space Shuttle main engine. The design approach consists of process modeling, residual generation, and fault detection and diagnosis. The engine is modeled using a discrete time, quasilinear state-space representation. Model parameters are determined by identification. Residuals generated from the model are used by a neural network to detect and diagnose engine component faults. Fault diagnosis is accomplished by training the neural network to recognize the pattern of the respective fault signatures. Preliminary results for a failed valve, generated using a full, nonlinear simulation of the engine, are presented. These results indicate that the developed approach can be used for fault detection and diagnosis. The results also show that the developed model is an accurate and reliable predictor of the highly nonlinear and very complex engine.

Duyar, Ahmet↗

Data-Generating Program for ASKA Modeling

Carrier plate assemblies of NASA Space Shuttle thermal protection system provided for easy access to protected vital parts of Shuttle. Each assembly mounted on substructure with fasteners through holes in protective tiles. Automatic System of Kinematic Analysis (ASKA) finite-element program evaluates these assemblies. PLATEFORT computer program developed as data generator for ASKA modeling. PLATEFORT greatly reduces amount of time and data required for building ASKA model of these assemblies.

Karimi-Dechesh, A.↗

Automated chemical resonance generation and structure filtration for kinetic modeling

This study discusses efficient and automated methods for constructing a set of representative resonance structures for arbitrary chemical species, including radicals and biradicals, consisting of the elements H, C, O, N, and S. Determining the representative reactive structures of chemical species is crucial for identification of reactive sites and consequently applying the correct reaction templates to generate the set of important reactions during automated chemical kinetic model generation. We describe a fundamental set of resonance pathway types, accounting for simple resonating structures, as well as global approaches for polycyclic aromatic species. Automatically discovering potential localized structures along with filtration to identify the representative structures was shown to be robust and relatively fast. The algorithms discussed here were recently implemented in the Reaction Mechanism Generator (RMG) software. The final structures proposed by this method were found to be in reasonable agreement with quantum chemical computation results of localized structure contributions to the resonance hybrid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Digital modeling of vibroacoustical processes generated by gearing

The statistical nature of vibroacoustical processes in transmission gears was studied using mathematical models. Special attention was given to high frequency components of vibroacoustical processes generated by spur gearing. Equations are given for describing torsional and tranverse vibrations of pairs of gear wheels when meshing, taking into account the flexibility of their supports.

Balitskiy, F. Y.↗

Radiative transfer modelling of discontinuous tree canopies at microwave frequencies

Development of a first-order radiative transfer model for predicting backscatter from tree canopies has been underway at the University of Michigan Radiation Laboratory for some time. This model is known as the Michigan Microwave Canopy Scattering (MIMICS) model. This article presents the second-generation MIMICS model (MIMICS II) which accounts for canopies with discontinuous (open) crown layer geometries. MIMICS II models open crown layers by treating the location, size, and shape of the individual tree crowns as random variables. The backscattering coefficients for the canopy are then determined by introducing statistics derived from these parameters into the radiative transfer solution. Application of the radiative transfer equations to the discontinuous canopy geometry is presented. The resulting model is a robust fully polarimetric solution that is applicable over a wide variety of canopy architectures. Model simulations are compared to results generated with the continuous canopy model. The effect of the open crown geometry is found to be most significant at shallow incidence angles and at high frequencies for trees with well-developed crowns. Under these conditions, the gaps in the crown layer give rise to a notable increase in crown layer transmissivity which allows the radar to see through to the lower layers of the canopy more easily, thereby directly affecting the backscatter contribution of the trunks and ground.

Mcdonald, K. C.↗

A model for estimation of potential generation of waste electrical and electronic equipment in Brazil

Highlights: Black-Right-Pointing-Pointer Literature of WEEE generation in developing countries is reviewed. Black-Right-Pointing-Pointer We analyse existing estimates of WEEE generation for Brazil. Black-Right-Pointing-Pointer We present a model for WEEE generation estimate. Black-Right-Pointing-Pointer WEEE generation of 3.77 kg/capita year for 2008 is estimated. Black-Right-Pointing-Pointer Use of constant lifetime should be avoided for non-mature market products. - Abstract: Sales of electrical and electronic equipment are increasing dramatically in developing countries. Usually, there are no reliable data about quantities of the waste generated. A new law for solid waste management was enacted in Brazil in 2010, and the infrastructure to treat this waste must be planned, considering the volumes of the different types of electrical and electronic equipment generated. This paper reviews the literature regarding estimation of waste electrical and electronic equipment (WEEE), focusing on developing countries, particularly in Latin America. It briefly describes the current WEEE system in Brazil and presents an updated estimate of generation of WEEE. Considering the limited available data in Brazil, a model for WEEE generation estimation is proposed in which different methods are used for mature and non-mature market products. The results showed that the most important variable is the equipment lifetime, which requires a thorough understanding of consumer behavior to estimate. Since Brazil is a rapidly expanding market, the 'boom' in waste generation is still to come. In the near future, better data will provide more reliable estimation of waste generation and a clearer interpretation of the lifetime variable throughout the years.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A model for simulating random atmospheres as a function of latitude, season, and time

An empirical stochastic computer model was developed with the capability of generating random thermodynamic profiles of the atmosphere below an altitude of 99 km which are characteristic of any given season, latitude, and time of day. Samples of temperature, density, and pressure profiles generated by the model are statistically similar to measured profiles in a data base of over 6000 rocket and high-altitude atmospheric soundings; that is, means and standard deviations of modeled profiles and their vertical gradients are in close agreement with data. Model-generated samples can be used for Monte Carlo simulations of aircraft or spacecraft trajectories to predict or account for the effects on a vehicle's performance of atmospheric variability. Other potential uses for the model are in simulating pollutant dispersion patterns, variations in sound propagation, and other phenomena which are dependent on atmospheric properties, and in developing data-reduction software for satellite monitoring systems.

Campbell, J. W.↗

“Gray Zone” Simulations Using a Three-Dimensional Planetary Boundary Layer Parameterization in the Weather Research and Forecasting Model

Abstract Generating accurate weather forecasts of planetary boundary layer (PBL) properties is challenging in many geographical regions, oftentimes due to complex topography or horizontal variability in, for example, land characteristics. While recent advances in high-performance computing platforms have led to an increase in the spatial resolution of numerical weather prediction (NWP) models, the horizontal gridcell spacing (Δ x ) of many regional-scale NWP models currently fall within or are beginning to approach the gray zone (i.e., Δ x ≈ 100–1000 m). At these gridcell spacings, three-dimensional (3D) effects are important, as the most energetic turbulent eddies are neither fully parameterized (as in traditional mesoscale simulations) nor fully resolved [as in traditional large-eddy simulations (LES)]. In light of this modeling challenge, we have implemented a 3D PBL parameterization for high-resolution mesoscale simulations using the Weather Research and Forecasting Model. The PBL scheme, which is based on the algebraic model developed by Mellor and Yamada, accounts for the 3D effects of turbulence by calculating explicitly the momentum, heat, and moisture flux divergences in addition to the turbulent kinetic energy. In this study, we present results from idealized simulations in the gray zone that illustrate the benefit of using a fully consistent turbulence closure framework under convective conditions. While the 3D PBL scheme reproduces the evolution of convective features more appropriately than the traditional 1D PBL scheme, we highlight the need to improve the turbulent length scale formulation. Significance Statement The spatial resolution of weather models continues to increase at a rapid rate in accordance with the enhancement of computing power. As a result, smaller-scale atmospheric features become more explicitly resolved. However, most numerical models still ignore the impact of horizontal weather variations on boundary layer flows, which becomes more important at these smaller spatial scales. To address this issue, we have implemented a new modeling approach, using fundamental principles, which accounts for horizontal variability. Our results show that including three-dimensional effects of turbulence is necessary to achieve realistic boundary layer characteristics. This novel technique may be useful for many applications including complex terrain flows, pollutant dispersion, and surface–atmosphere interaction studies.

Juliano, Timothy W.↗

Systems and methods for modeling water quality

A system, method, device and computer-readable medium for creating an ensemble model of water quality. The ensemble model is generated by determining a set of optimal component models for spectral regions of a body of water, and combining the optimal models. The optimal models can be based on remote sensing data, including satellite imagery. A K-fold partition approach or a global approach can be used to determine the optimal component models, and the optimal component models can be combined through spectral space partition rules to generate an ensemble model of water quality. The ensemble model not only has improved water quality prediction ability, but also has strong spatial and temporal extensibility. The spatial and temporal extensibility of the ensemble model is fundamentally important and desirable for long-term and large-scale remote sensing monitoring and assessment of water quality.

Liu, Hongxing↗

Machine Learning Assisted HPC Workload Trace Generation for Leadership Scale Storage Systems

Monitoring and analyzing a wide range of I/O activities in an HPC cluster is important in maintaining mission-critical performance in a large-scale, multi-user, parallel storage system. Center-wide I/O traces can provide high-level information and fine-grained activities per application or per user running in the system. Studying such large-scale traces can provide helpful insights into the system. It can be used to develop predictive methods for making predictive decisions, adjusting scheduling policies, or providing decisions for the design of next-generation systems. However, sharing real-world I/O traces to expedite such research efforts leaves a few concerns; i) the cost of sharing the large traces is expensive due to this large size, and ii) privacy concern is an issue.We address such issues by building an end-to-end machine learn- ing (ML) workflow that can generate I/O traces for large-scale HPC applications. We leverage ML based feature selection and gener- ative models for I/O trace generation. The generative models are trained on I/O traces collected by the darshan I/O characterization tool over a period of one year. We present a two-step generation process consisting of two deep-learning models, called the feature generator and the trace generator. The combination of two-step generative models provides robustness by reducing the bias of the model and accounting for the stochastic nature of the I/O traces across different runs of an application. We evaluate the performance of the generative models and show that the two-step model can generate time-series I/O traces with less than 20% root mean square error.

Paul, Arnab↗