Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GREEN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

A Green, Fire–Retarding Ether Solvent for Sustainable High–Voltage Li–Ion Batteries at Standard Salt Concentration

Lithium-ion batteries (LIBs) are increasingly encouraged to enhance their environmental friendliness and safety while maintaining optimal energy density and cost-effectiveness. Although various electrolytes using greener and safer glyme solvents have been reported, the low charge voltage (usually lower than 4.0 V vs Li/Li + ) restricts the energy density of LIBs. Herein, tetraglyme, a less-toxic, non-volatile, and non-flammable ether solvent, is exploited to build safer and greener LIBs. It is demonstrated that ether electrolytes, at a standard salt concentration (1 m), can be reversibly cycled to 4.5 V vs Li/Li + . Anchored with Boron-rich cathode-electrolyte interphase (CEI) and mitigated current collector corrosion, the LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode delivers competitive cyclability versus commercial carbonate electrolytes when charged to 4.5 V. Synchrotron spectroscopic and imaging analyses show that the tetraglyme electrolyte can sufficiently suppress the overcharge behavior associated with the high-voltage electrolyte decomposition, which is advantageous over previously reported glyme electrolytes. The new electrolyte also enables minimal transition metal dissolution and deposition. NMC811||hard carbon full cell delivers excellent cycling stability at C/3 with a high average Coulombic efficiency of 99.77%. In conclusion, this work reports an oxidation-resilient tetraglyme electrolyte with record-high 4.5 V stability and enlightens further applications of glyme solvents for sustainable LIBs by designing Boron-rich interphases.

36 MATERIALS SCIENCE↗

Insights into cellulase-lignin non-specific binding revealed by computational redesign of the surface of green fluorescent protein

Biological-mediated conversion of pretreated lignocellulosic biomass to biofuels and biochemicals is a promising avenue towards energy sustainability. However, a critical impediment to the commercialization of cellulosic biofuel production is the high cost of cellulase enzymes needed to deconstruct biomass into fermentable sugars. One major factor driving cost is cellulase adsorption and inactivation in the presence of lignin, yet we currently have a poor understanding of the protein structure-function relationships driving this adsorption. In this work, we have systematically investigated the role of protein surface potential on lignin adsorption using a model monomeric fluorescent protein. We have designed and experimentally characterized 16 model protein variants spanning the physiological range of net charge (-24 to +16 total charges) and total charge density (0.28 to 0.40 charges per sequence length) typical for natural proteins. Protein designs were expressed, purified, and subjected to in silico and in vitro biophysical measurements to evaluate the relationship between protein surface potential and lignin adsorption properties. The designs were comparable to model fluorescent protein in terms of thermostability and heterologous expression yield, although the majority of the designs unexpectedly formed homodimers. Protein adsorption to lignin was studied at two different temperatures using Quartz Crystal Microbalance with Dissipation Monitoring and a subtractive mass balance assay. We found a weak correlation between protein net charge and protein-binding capacity to lignin. No other single characteristic, including apparent melting temperature and 2nd virial coefficient, showed correlation with lignin binding. Analysis of an unrelated cellulase dataset with mutations localized to a family I carbohydrate-binding module showed a similar correlation between net charge and lignin binding capacity. Altogether, our study provides strategies to identify highly active, low lignin-binding cellulases by either rational design or by computational screening genomic databases.

09 BIOMASS FUELS↗

Ethanol: A Promising Green Solvent for the Deconstruction of Lignocellulose

We present that growing energy demand and the need to reduce environmental impact, increase energy security, and rural economic development has encouraged the development of sustainable renewable fuels. Non-food lignocellulosic biomass is a suitable source for sustainable energy because the biomass feedstocks are low cost, abundant, and carbon neutral. Recent thermochemical conversion studies are frequently directed at converting biomass to high quality liquid fuel precursors or chemicals in a single step. Supercritical ethanol has been selected as a promising solvent medium to deconstruct lignocellulosic biomass since the ethanol has extraordinary solubility towards lignocellulosic biomass and can be resourced from cellulosic ethanol facilities. This review provides critical insight into both catalytic and non-catalytic strategies of lignocellulose deconstruction. In this context, the supercritical ethanol deconstruction pathways are thoroughly reviewed; gas chromatography coupled with mass spectrometry (GC-MS), one-dimensional and two-dimensional nuclear magnetic resonance spectrometry (NMR), and elemental analysis strategies towards liquid biomass deconstruction products are critically presented. Lastly, this review aims to provide readers a broad and accurate roadmap of this novel biomass to biofuel conversion techniques.

09 BIOMASS FUELS↗

Green synthesis of sulfur‐doped g‐C 3 N 4 nanosheets for enhanced removal of oxytetracycline under visible‐light irradiation and reduction of its N ‐nitrosodimethylamine formation potential

Abstract BACKGROUND In this study, sulfur‐doped g‐C 3 N 4 (SCN) nanosheets were synthesized using thiourea as a precursor, and then used to catalyze the degradation of oxytetracycline (OTC) under visible‐light irradiation. OTC was chosen as target contaminant because of it being an important precursor of N ‐nitrosodimethylamine (NDMA). RESULTS The removal of OTC was influenced by its initial concentration, initial pH, SCN dosage and water matrices. OTC (≤10 mg L −1 ) was almost completely removed in 40 min under the conditions of an initial pH of 7.0 and a SCN dose of 1.0 g L −1 , and its degradation was well described by the pseudo‐first‐order kinetics model. Water matrices would also influence the degradation of OTC in the system. Electron paramagnetic resonance analysis and trapping experiments confirmed that the function of the radicals for OTC removal followed the order of • O 2 − > • OH > h + . Eight transformation products were determined during the degradation of OTC, it being removed through four pathways: methyl oxidization, demethylation, decarbonylation and secondary alcohol oxidation. SCN was stable in the system, as the removal efficiency of OTC was not significantly reduced even after three recycles. In addition, 55.5% of NDMA formation potential of OTC was reduced after SCN catalytic oxidation. CONCLUSIONS The results imply that the visible‐light‐driven SCN catalytic oxidation is an effective technology not only for the removal of OTC but also for the reduction of NDMA formation potential. © 2021 Society of Chemical Industry

Dou, Yicheng↗

Commercialization of Ionic Liquids in Pursuit of Green Chemistry: Must we Each Become an Entrepreneur?

Abstract There will be common challenges to scaling‐up any ionic liquids separations technologies which require very large volumes of ionic liquid. Some of these challenges are illustrated in this personal account which chronicles the extraction of chitin from shrimp shell from discovery to current commercialization efforts. The road being taken from discovery in an academic laboratory, through attempts to navigate the scaling‐up to commercial scale using the vehicle of a faculty startup company is rewarding, but fraught with roadblocks, detours, and unexpected challenges. The differences in ‘technically feasible’ and ‘commercially viable’ are not always evident from the beginning of the journey, however, one wonders what achievements we miss as a Society because it was assumed to not be commercially viable.

Shamshina, Julia L.↗

Green synthesis, molecular docking, anti-oxidant and anti-inflammatory activities of α-aminophosphonates

The naturally viable α-amino acid surrogates have been synthesised via Kabachnik–Fields reaction by the condensation of 2-aminothiazole with various aldehydes and dialkyl phosphites in the presence of Caffeine hydrogen sulfate (CHS) as eco-friendly and reusable catalyst under microwave irradiation and solvent-free conditions. The title compounds were characterised by IR, {sup 1}H, {sup 13}C, {sup 31}P NMR and mass spectral data. All the synthesised (4a–j) compounds were screened for their insilico and in vitro studies. The results revealed that, out of all the titled compounds 4a, 4e, 4h and 4i have exhibited significant activity in terms of antioxidant and anti-inflammatory activity. In addition, molecular docking studies were also carried out against Cox-2 with celocoxib as the standard. .

60 APPLIED LIFE SCIENCES↗

Green and Cost Effective Synthesis of Fluorescent Carbon Quantum Dots for Dopamine Detection

Carbon quantum dots (CQDs) due to its high fluorescent output is evolving as novel sensing material and is considered as future building blocks for nano sensing devices. Hence, in this investigation we report microwave assisted preparation and multi sensing application of CQDs. The microwave derived CQDs are characterized by Dynamic Light Scattering (DLS) experiment and Fourier Infrared spectra (FTIR) to investigate the size distribution and chemical purity respectively. Fluorescent emission spectra recorded at varying pH shows varying fluorescence emission intensities. Further, emission spectra recorded at different temperatures shows that fluorescence emission of CQDs greatly depends on temperature. Therefore, we demonstrate the pH and temperature sensing characteristics of CQDs by fluorescence quenching behaviour. In addition, the interaction and sensing behaviour of CQDs for dopamine is also presented in this work with a detection limit of 0.2 mM. The steady state and time-resolved methods have been employed in fluorescence quenching methods for sensing dopamine through CQDs at room temperature. The bimolecular quenching rate constants for different concentration have been measured. The interaction between CQDs and dopamine indicates fluorescence quenching method is an elegant process for detecting dopamine through CQDs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Green Emitting Cerium Doped CaS Whiskers Grown by Solid State Diffusion Method

Undoped and cerium doped Calcium sulfide (CaS) phosphors were synthesized using solid state diffusion method. The X-ray diffraction pattern revealed that both undoped and doped CaS crystallites have cubic structure with average crystallite size varying from 20 to 30 nm. Scanning electron micrographs indicated that Ce doped CaS phosphors were composed of whiskers with different dimensions and orientations. The optical properties of undoped and Ce doped particles were characterized using Photoluminescence (PL) and UV-Vis absorption spectroscopy. The PL emission spectrum of cerium doped CaS phosphors for an excitation wavelength 465 nm showed a main peak at 500 nm and a shoulder peak at 556 nm due to 5d → 4f transition in Ce{sup 3+} ions. The variation of PL intensity with cerium concentration was investigated and the maximum PL intensity was obtained for a doping concentration of 3 wt.%. The optical band gap of the samples was estimated from the diffuse reflectance spectrum and was found to increase with increase in cerium concentration. The enhanced optical properties of these phosphors can be exploited in various optoelectronic devices including displays and bioimaging techniques.

36 MATERIALS SCIENCE↗

Effect of Oregano Essential Oil Content on Properties of Green Biocomposites Based on Cassava Starch and Sugarcane Bagasse for Bioactive Packaging

In this study, 10 wt% sugarcane bagasse fiber-reinforced starch foam composites were prepared with different oregano essential oil (OEO) contents in the range of 2–8 wt% to improve the antimicrobial effectiveness of bioactive packaging. FT-IR analysis confirms that OEO penetrates into starch foam composite. From the result of antimicrobial activity, the incorporation of 8 wt% OEO in starch foam composite achieves the minimum inhibitory concentration against Escherichia-coli (E. coli) and Staphylococcus-aureus (S. aureus). OEO is more effective against S. aureus (Gram-positive bacteria) than E. coli (Gram-negative bacteria). The water absorption capacity and hygroscopicity of foam composite decrease with increasing OEO content. The lowest monolayer value is observed in starch foam composite containing 8 wt% OEO. The soil biodegradation rate and flexural strength of samples slightly decrease with increasing OEO content. As a result, starch foam composite containing OEO can be applied as bioactive packaging to preserve foods.

54 ENVIRONMENTAL SCIENCES↗

Green Composite Based on PHB and Montmorillonite for KNO{sub 3} and NPK Delivery System

Controlled release fertilizer (CRF) as a safe system for reducing environmental pollution still remains as demand for the agribusiness. Natural and biodegradable polymer materials have been proposed as a prominent and sustainable controlled delivery system. Composite based on polyhydroxybutyrate (PHB), starch, glycerol and montmorillonite (PHBSGMMt) has been proposed as a carrier for controlled release fertilizers, such as KNO{sub 3} and NPK. PHBSGMMt with 10 wt% of KNO{sub 3} or NPK processed by melting at 162 °C, 60 rpm during 10 min in a mixer chamber of torque rheometer. Composites were characterized according to its structure by FTIR and XRD, in thermal behavior by TGA and DSC, and morphology by SEM. Fertilizers release in water was determined by ionic conductivity. Clay, KNO{sub 3}, and NPK increased the PHB/starch compatibility and homogeneity, resulting in a well-interfaced material obtained for PHBSGMMTNPK. MMtKNO{sub 3} was mainly on PHB phase and MMtNPK on the compatible polymeric phase. These behaviors explain the faster release of KNO{sub 3} in water medium since the KNO{sub 3} has high solubility and the phase separation creates fissures that turn in water pathway. Kinetic parameters classified the material as a non-Fickian diffusion or anomalous transport mechanism.

36 MATERIALS SCIENCE↗

Green Synthesis of Fe{sub 3}O{sub 4}/Cellulose/Polyvinyl Alcohol Hybride Aerogel and Its Application for Dye Removal

A novel Fe{sub 3}O{sub 4}/cellulose–polyvinyl alcohol (PVA) aerogel was successfully synthesized by an eco-friendly and facile method in this work. Cellulose/PVA matrix was prepared through an environmental friendly physical cross-linking process and further in-situ decorated with Fe{sub 3}O{sub 4}. Series of Fe{sub 3}O{sub 4} decorated aerogels were prepared and the effects of Fe{sub 3}O{sub 4} nanoparticles (NPs) on the aerogels were systematic investigated. As-prepared aerogels exhibited desirable properties including nanostructure, relatively high porosity, improved mechanical and superparamagnetism. The TEM results showed that Fe{sub 3}O{sub 4} NPs were integrated in the three-dimensional matrix of cellulose/PVA with a diameter of 9–12 nm. Furthermore, the mechanical strength of the aerogels was significantly enhanced after the introduction of Fe{sub 3}O{sub 4} NPs. Meanwhile, the obtained Fe{sub 3}O{sub 4}/cellulose/PVA aerogel exhibited excellent adsorption performance toward methyl blue dye, and can be reused through fenton-like catalysts oxidative degradation of organic dye in H{sub 2}O{sub 2} solution. Therefore, they will have a great potential application as eco-friendly and economical adsorbents.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Green Synthesis and Antioxidant Study of Silver Nanoparticles of Root Extract of Sageretia thea and Its Role in Oxidation Protection Technology

Development of environmentally friendly synthesis of nanoparticles is one of the important areas of research in nanotechnology. In present study silver naopartticles (AgNPs) of root extract of Sageretia thea (S. thea) were synthesized at room temperature. The synthesized AgNPs were characterized by UV. Visible spectroscopy (UV), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectroscopy (EDX), transmission electron microscopy (TEM), dynamic light scattering (DLS) and Fourier transform infrared (FT-IR) spectroscopy. Formation of AgNPs was confirmed by visual examination the colour change from yellow to brick red due to surface Plasmon resonance band at 435 nm. SEM and TEM analysis of synthesized AgNPs revealed spherical morphology with average particle size 25 nm. Crystalline nature of the AgNPs in face centered cubic structure is evident from the selected area electron diffraction (SAED) and XRD pattern. The presence of elemental Ag was confirmed by EDX analysis at 3kv. Different functional groups which responsible for reduction and stabilization of reaction medium was confirmed by FTIR spectroscopy. The biosynthesized AgNPs showed strong DPPH and dye protection radical scavenging assay while modest hydrogen peroxide radical scavenging assay as compare to crude extract. The present investigations suggest that biosynthesized nanoparticles have a high potential for use in the preparation of drugs used against various diseases and also a promising candidate for many medical applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tailored Natural Polysaccharides Beads as Green Sorbents for Efficient Lysozyme Adsorption

Herein, we prepared alginate (SA)/carboxymethyl cellulose (CMC) gel beads through Ca{sup 2+} and glutaraldehyde (GA) crosslinking and investigated their adsorption performance on lysozyme from aqueous solution. Taking advantage of the abundant active carboxyl groups on SA and CMC, the obtained SA/CMC gel beads present an excellent integrated lysozyme adsorption performance with a high capacity of 236.34 mg g{sup −1}, short equilibrium time of 8 h, ease of elution, and good reusability. Furthermore, the resultant SA/CMC gel beads also possess unique selectivity for positively charged proteins, confirmed by the method of sodium dodecyl sulfate polyacrylamide gel electrophoresis. Considering the nature of biopolymers and advantages of favorable physical properties, high efficiency, cost-effectiveness, intriguing adsorption capacity and easier separation from the reaction system, the SA/CMC gel beads may find more potential in protein separation and purification than that of synthetic material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗