Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Future Development Plans”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Lessons Learned From Public Outreach: Effective Incorporation of the Stakeholder Voice - 18447

The licensing process for any facility associated with nuclear power or aspects of the nuclear fuel cycle can be expected to encounter intense stakeholder interest, and often significant challenges. Over the last decade, staff of the Center for Nuclear Waste Regulatory Analyses (CNWRA{sup R}) at Southwest Research Institute{sup R} (SwRI{sup R}) provided comprehensive support to the U.S. Nuclear Regulatory Commission (NRC) for public outreach efforts across a wide variety of nuclear activities. Many of these projects included public involvement and consultation activities for compliance with the National Environmental Policy Act (NEPA), including scoping, public meetings, responding to public comments on draft documents, and holding small meetings with affected local, state, and tribal governments. In addition, we have supported NRC public outreach related to nuclear facility licensing activities (including the proposed repository at Yucca Mountain), rulemaking, and regulatory guidance development. This experience has offered us a broad view of the challenges faced by industry, regulators, and stakeholders. In the process, we have observed some best practices that lead to effective stakeholder communication. Communication about complex technical issues is challenging, particularly for societally controversial topics, such as civilian use of nuclear power and management of radioactive waste. Most commonly, we have observed a lack of mutual trust and respect among industry, regulators, and stakeholders that creates an atmosphere ripe for suspicion and misunderstanding. Stakeholders have, in public comments, criticized the lack of appropriate venues to raise concerns in which they feel they can get meaningful responses from the nuclear industry and regulators. Conversely, industry faces difficulty in reaching compromise with stakeholders, who sometimes misinterpret or misrepresent factual information. Within this contentious environment, regulators are constrained by their statutory framework, even as they are challenged to be more responsive, transparent, and fair to both stakeholders and industry. In spite of these obstacles, there are examples where feedback from stakeholders was heard and utilized. Because of successful collection of appropriate feedback, regulators became more adept at understanding the full range of perspectives from both industry and stakeholders, and subsequently did a better job at effectively incorporating feedback and communicating their decisions and findings in a clear and understandable way. Ultimately, the success of these examples was based on a measure of mutual respect, which was reached through effective communication and implementation of some best practices. These best practices include (i) outreach planning that is abundantly mindful of the various stakeholder points of view, site history, regional characteristics, and probable future and related actions, combined with advance identification of key stakeholders; (ii) development and distribution of information that facilitates public participation; and (iii) use of avenues by which stakeholders can provide meaningful and effective comments. Illustrative examples include (i) how concerns raised by stakeholders were heard by an applicant and resulted in a revised project proposal; (ii) use of a variety of interaction formats that incorporated input across a broad spectrum of stakeholders; (iii) utilizing stakeholder feedback received during scoping; and (iv) how a facility underestimated the impact of 'outsider' stakeholder voices that were in contrast to the known local community. By moving past the viewpoint that public outreach is a 'necessary evil' and engaging only to check a procedural box, each participant can benefit from mutually satisfactory and improved outcomes. (author)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The International Reference Ionosphere Today and in the Future

The international reference ionosphere (IRI) is the internationally recognized and recommended standard for the specification of plasma parameters in Earth's ionosphere. It describes monthly averages of electron density, electron temperature, ion temperature, ion composition, and several additional parameters in the altitude range from 60 to 1,500 km. A joint working group of the Committee on Space Research (COSPAR) and the International Union of Radio Science (URSI) is in charge of developing and improving the IRI model. As requested by COSPAR and URSI, IRI is an empirical model being based on most of the available and reliable data sources for the ionospheric plasma. The paper describes the latest version of the model and reviews efforts towards future improvements, including the development of new global models for the F2 peak density and height, and a new approach to describe the electron density in the topside and plasmasphere. Our emphasis will be on the electron density because it is the IRI parameter most relevant to geodetic techniques and studies. Annual IRI meetings are the main venue for the discussion of IRI activities, future improvements, and additions to the model. A new special IRI task force activity is focusing on the development of a real-time IRI (RT-IRI) by combining data assimilation techniques with the IRI model. A first RT-IRI task force meeting was held in 2009 in Colorado Springs. We will review the outcome of this meeting and the plans for the future. The IRI homepage is at http://www.IRI.gsfc.nasa.gov

Bilitza, Dieter↗

Evolving Design Criteria for Very Large Aperture Space-Based Telescopes and Their Influence on the Need for Integrated Tools in the Optimization Process

NASA's Advanced Mirror Technology Development (AMTD) program has been developing the means to design and build the future generations of space based telescopes. With the nearing completion of the James Webb Space Telescope (JWST), the astrophysics community is already starting to define the requirements for follow on observatories. The restrictions of available launch vehicles and the possibilities of planned future vehicles have fueled the competition between monolithic primaries (with better optical quality) and segmented primaries (with larger apertures, but with diffraction, costs and figure control issues). Regardless of the current shroud sizes and lift capacities, these competing architectures share the need for rapid design tools. As part of the AMTD program a number of tools have been developed and tested to speed up the design process. Starting with the Arnold Mirror Modeler (which creates Finite Element Models (FEM) for structural analysis) and now also feeds these models into thermal stability analyses. They share common file formats and interchangeable results. During the development of the program, numerous trade studies were created for 4 meter and 8 meter monolithic primaries, complete with support systems. Evaluation of these results has led to a better understanding of how the specification drives the results. This paper will show some of the early trade studies for typical specification requirements such as lowest mirror bending frequency and suspension system lowest frequency. The results use representative allowable stress values for each mirror substrate material and construction method and generic material properties. These studies lead to some interesting relationships between feasible designs and the realities of actually trying to build these mirrors. Much of the traditional specifications were developed for much smaller systems, where the mass and volume of the primary where a small portion of the overall satellite. JWST shows us that as the aperture grows, the primary takes up the majority of the mass and volume and the established rules need to be adjusted. For example, a small change in lowest frequency requirement can change the cost by millions of dollars.

Space-based telescopes↗

Interdisciplinary Collaboration on Green Infrastructure for Urban Watershed Management: An Ohio Case Study

Many older Midwestern cities of the United States are challenged by costly aging water infrastructure while working to revitalize urban areas. These cities developed much of their water infrastructure before the Clean Water Act became law and have struggled to mitigate contaminant loading to surface waters. An increasingly common approach to resolving these challenges is the integration of green infrastructure with gray infrastructure improvements to manage point and non-point source pollution. Stakeholder engagement and collaboration during green infrastructure planning can help address impairments and promote community involvement through the revitalization process. Mill Creek watershed in Cincinnati, OH, USA has seen improvement in watershed integrity indicators after being impaired for many decades by flashy hydrology, combined sewer overflows, and water quality degradation. A workshop was conducted to examine how integrated green and gray infrastructure has contributed to improvements in Mill Creek over the past several decades. This effort sought to examine internal and external factors that influence a multi-stakeholder watershed approach to planning, implementing, and evaluating green infrastructure techniques. Community investment and physical infrastructure, access to datasets, and skills and knowledge exchange were essential in improving use attainment in the Mill Creek. Strategic placement of green infrastructure has the potential to maximize water quality benefits and ecosystem services. However, green infrastructure deployment has been more opportunistic due to the diversity of stakeholder and decision maker interests. Future work should consider collaborative approaches to address scaling challenges and workforce development to maximize green infrastructure benefits.

54 ENVIRONMENTAL SCIENCES↗

NASA Technology Demonstrations Missions Program Overview

The National Aeronautics and Space Administration (NASA) Fiscal Year 2010 (FY10) budget introduced a new strategic plan that placed renewed emphasis on advanced missions beyond Earth orbit. This supports NASA s 2011 strategic goal to create innovative new space technologies for our exploration, science, and economic future. As a result of this focus on undertaking many and more complex missions, NASA placed its attention on a greater investment in technology development, and this shift resulted in the establishment of the Technology Demonstrations Missions (TDM) Program. The TDM Program, within the newly formed NASA Office of the Chief Technologist, supports NASA s grand challenges by providing a steady cadence of advanced space technology demonstrations (Figure 1), allowing the infusion of flexible path capabilities for future exploration. The TDM Program's goal is to mature crosscutting capabilities to flight readiness in support of multiple future space missions, including flight test projects where demonstration is needed before the capability can transition to direct mission The TDM Program has several unique criteria that set it apart from other NASA program offices. For instance, the TDM Office matures a small number of technologies that are of benefit to multiple customers to flight technology readiness level (TRL) 6 through relevant environment testing on a 3-year development schedule. These technologies must be crosscutting, which is defined as technology with potential to benefit multiple mission directorates, other government agencies, or the aerospace industry, and they must capture significant public interest and awareness. These projects will rely heavily on industry partner collaboration, and funding is capped for all elements of the flight test demonstration including planning, hardware development, software development, launch costs, ground operations, and post-test assessments. In order to inspire collaboration across government and industry, more than 70% of the TDM funds will be competitively awarded as a result of yearly calls for proposed flight demonstrators and selected based on possible payoff to NASA, technology maturity, customer interest, cost, and technical risk reduction. This paper will give an overview of the TDM Program s mission and organization, as well as its current status in delivering advanced space technologies that will enable more flexible and robust future missions. It also will provide several examples of missions that fit within these parameters and expected outcomes.

Turner, Susan↗

NASA's Advanced Radioisotope Power Conversion Technology Development Status

NASA's Advanced Radioisotope Power Systems (ARPS) project is developing the next generation of radioisotope power conversion technologies that will enable future missions that have requirements that cannot be met by either photovoltaic systems or by current radioisotope power systems (RPSs). Requirements of advanced RPSs include high efficiency and high specific power (watts/kilogram) in order to meet future mission requirements with less radioisotope fuel and lower mass so that these systems can meet requirements for a variety of future space applications, including continual operation surface missions, outer-planetary missions, and solar probe. These advances would enable a factor of 2 to 4 decrease in the amount of fuel required to generate electrical power. Advanced RPS development goals also include long-life, reliability, and scalability. This paper provides an update on the contractual efforts under the Radioisotope Power Conversion Technology (RPCT) NASA Research Announcement (NRA) for research and development of Stirling, thermoelectric, and thermophotovoltaic power conversion technologies. The paper summarizes the current RPCT NRA efforts with a brief description of the effort, a status and/or summary of the contractor's key accomplishments, a discussion of upcoming plans, and a discussion of relevant system-level benefits and implications. The paper also provides a general discussion of the benefits from the development of these advanced power conversion technologies and the eventual payoffs to future missions (discussing system benefits due to overall improvements in efficiency, specific power, etc.).

Anderson, David J.↗

The TAME Project: Towards improvement-oriented software environments

Experience from a dozen years of analyzing software engineering processes and products is summarized as a set of software engineering and measurement principles that argue for software engineering process models that integrate sound planning and analysis into the construction process. In the TAME (Tailoring A Measurement Environment) project at the University of Maryland, such an improvement-oriented software engineering process model was developed that uses the goal/question/metric paradigm to integrate the constructive and analytic aspects of software development. The model provides a mechanism for formalizing the characterization and planning tasks, controlling and improving projects based on quantitative analysis, learning in a deeper and more systematic way about the software process and product, and feeding the appropriate experience back into the current and future projects. The TAME system is an instantiation of the TAME software engineering process model as an ISEE (integrated software engineering environment). The first in a series of TAME system prototypes has been developed. An assessment of experience with this first limited prototype is presented including a reassessment of its initial architecture.

Basili, Victor R.↗

Current and Future Plans of the NASA Data Assimilation Office (DAO)

The mission of the Data Assimilation Office (DAO) is to advance the state of the art of data assimilation and produce research-quality assimilated data sets which make optimal use of space-based observations. Development efforts over the last few years have focused on delivering a production data assimilation system in support of NASA's Terra platform. That system, called the Goddard Earth Observing System - version 2 or GEOS-2, represents a major upgrade to the baseline GEOS-1 system employed in NASA's first reanalysis effort. GEOS-2 includes a physical-space three dimensional variational analysis algorithm (the Physical-space Statistical Analysis System or PSAS) and numerous improvements to the general circulation model. The latter include a Soil-Vegetation-Atmosphere Transfer (SVAT) land surface scheme, a level 2.5 moist turbulence scheme and new Short Wave (SW) and Long Wave (LW) radiation code. The system also includes an off-line ozone assimilation system, and the capability to assimilate scatterometer surface winds, and TIROS Operational Vertical Sounder (TOVS) and Special Sensor Microwave Imager (SSM/I) moisture data. GEOS-2 is currently run at 1 degree horizontal resolution and 48 levels extending to O.Olmb. Experimental versions of GEOS-2 are run with a global stretched grid allowing enhanced (e.g. 1/4 deg) regional resolution. Other capabilities being developed include, the assimilation of Tropical Rainfall Measuring Mission (TRMM) precipitation and Global Positioning System (GPS) data, an off-line land surface assimilation system, and a retrospective analysis scheme. The DAO is also engaged in a number of collaborative efforts to help accelerate the development of the next generation data assimilation system. These include, a joint modeling effort between the DAO and NCAR/CGDD to develop a new Global Circulation Model (GCM), and a Department of Energy Lawrence Livermore National Laboratory (DOE/LLNL) collaboration on model parallelization. Plans for the next reanalysis will be discussed in the context of current and near term system quality and computing capabilities, and the need for multiple reanalysis products.

Atlas, Robert↗

End-to-end differentiable digital twin for the IOTA/FAST facility

As the design complexity of modern accelerators grows, there is more interest in using controllable-fidelity simulations that have fast execution time or can yield additional insights about accelerator state. One notable example of additional information are gradients of physical observables with respect to design parameters produced by differentiable simulations. The IOTA/FAST facility has recently begun a program to implement and experimentally validate an end-to-end digital twin to serve as a virtual accelerator test stand, allowing for rapid prototyping of new software and experiments with minimal beam time costs. In this contribution we will discuss our plans and progress. Specifically, we will cover the selection and benchmarking of both physics and ML codes for linac and ring simulation, the development of generic interfaces between surrogate and physics-based sections, and presenting the control interface as either a deterministic event loop or a fully asynchronous EPICS soft input/output controller. We will also discuss challenges in model calibration and uncertainty quantification, as well as future plans to implement larger proton accelerators like PIPII and Booster.

Kuklev, N. [Fermilab]↗

Bidirectional Reflectance Functions for Application to Earth Radiation Budget Studies

Reflected solar radiative fluxes emerging for the Earth's top of the atmosphere are inferred from satellite broadband radiance measurements by applying bidirectional reflectance functions (BDRFs) to account for the anisotropy of the radiation field. BDRF's are dependent upon the viewing geometry (i.e. solar zenith angle, view zenith angle, and relative azimuth angle), the amount and type of cloud cover, the condition of the intervening atmosphere, and the reflectance characteristics of the underlying surface. A set of operational Earth Radiation Budget Experiment (ERBE) BDRFs is available which was developed from the Nimbus 7 ERB (Earth Radiation Budget) scanner data for a three-angle grid system, An improved set of bidirectional reflectance is required for mission planning and data analysis of future earth radiation budget instruments, such as the Clouds and Earth's Radiant Energy System (CERES), and for the enhancement of existing radiation budget data products. This study presents an analytic expression for BDRFs formulated by applying a fit to the ERBE operational model tabulations. A set of model coefficients applicable to any viewing condition is computed for an overcast and a clear sky scene over four geographical surface types: ocean, land, snow, and desert, and partly cloudy scenes over ocean and land. The models are smooth in terms of the directional angles and adhere to the principle of reciprocity, i.e., they are invariant with respect to the interchange of the incoming and outgoing directional angles. The analytic BDRFs and the radiance standard deviations are compared with the operational ERBE models and validated with ERBE data. The clear ocean model is validated with Dlhopolsky's clear ocean model. Dlhopolsky developed a BDRF of higher angular resolution for clear sky ocean from ERBE radiances. Additionally, the effectiveness of the models accounting for anisotropy for various viewing directions is tested with the ERBE along tract data. An area viewed from nadir and from the side give two different radiance measurements but should yield the same flux when converted by the BDRF. The analytic BDRFs are in very good qualitative agreement with the ERBE models. The overcast scenes exhibit constant retrieved albedo over viewing zenith angles for solar zenith angles less than 60 degrees. The clear ocean model does not produce constant retrieved albedo over viewing zenith angles but gives an improvement over the ERBE operational clear sky ocean BDRF.

Manalo-Smith, N.↗

In-situ Photophysical Monitors and Corrective Algorithms for Photovoltaic Film Deposition and Rapid Thermal Processing in Scalable Roll-to-Roll Manufacturing

This project evaluated three photophysics-based approaches for in situ process monitoring of the scalable deposition of perovskite photovoltaic films. Based on stakeholder input and the results of laboratory trials and literature analysis, two techniques, angle resolved elastic light scattering (ARLS) and time-resolved photoluminescence (TRPL) were prototyped and demonstrated with a mixture of simulation, offline and online tests. Also, a hybrid gas flow and humidity control enclosure was constructed and demonstrated to stabilize the ambient conditions around the slot die deposition process and were demonstrated to meet the target humidity control in situ. Due in part to a delayed start and COVID-related lab restrictions and personnel changes, some of the milestones were not met. In spite of these challenges, however, both techniques were prototyped through several iterations and demonstrated significant promise for rapid in line perovskite characterization within the targeted characterization time windows and these techniques are under further development for use in DE-FOA000235:2357-1586. The TRPL system was fully mounted and demonstrated on the scaled slot die roll to roll and sheet coating systems at the Washington Clean Energy Testbeds (WCET). Motivated by significant internal and stakeholder interest, the successful prototyping achieved here, the ongoing need for in-situ characterization for the scale-up of perovskite manufacturing, and the benefits of in situ photophysical characterization for future funded process development research, we are continuing with the principle aims of the project to develop effect in situ photophysical probes for fast analysis of the optoelectronic and structural quality of sheet based and roll to roll process perovskites. TRPLS and ARLS probes proposed in the project are to be completed with external support from the Washington Research Foundation at the WCET. We are currently actively engaged in the acquisition of components and plan to complete and test the probes within three months. It is our intention that these probes will then be used in ongoing perovskite development with our research and commercialization partners including First Solar and other member of the US MAP consortium in future funded development work.

14 SOLAR ENERGY↗

The Princeton Field-Reversed Configuration for Compact Nuclear Fusion Power Plants

The Princeton Field-Reversed Configuration (PFRC) nuclear fusion reactor concept is an innovative approach to fusion power generation prioritizing low neutron production and small size. Here, a combination of analytical modeling and numerical simulation shows that the novel heating approach generates an FRC with closed field lines. Simulation data from a single-particle Hamiltonian code predicts ms-scale plasma heating in reactor-scale conditions while PIC codes predict formation of warm FRC plasmas from initial mirror fields. The PFRC-1 and PFRC-2 experiments have heated electrons to energies well in excess of 100 eV and plasma durations to 300 ms, more than 10 4 times longer than the predicted tilt instability growth time. From these data, we have created a development plan and anticipated performance metrics for a fusion reactor based on the PFRC concept. The resulting 1–10 MW PFRC reactors would be suitable for diverse applications, from submarines to urban environments to space propulsion. PFRC is a steady-state, driven magnetic confinement device. Plasma, inside a cylindrical array of coils, is confined and heated by external RF antennae. PFRC would be ultra-low radiation due to both its fuel and small size. The choice of advanced fuels, deuterium and helium-3 (D– 3 He), may be enabled by the high-β FRC configuration. The small size of the reactor would enable rapid exhaust of the dangerous tritium ash. Low radiation would make the reactor safer to operate and, in combination with simple geometry and small size, dramatically lowers development and maintenance costs. This review paper gives an introduction to the physics of the PFRC and a summary of the PFRC-2 experiment results to date. It then discusses the future program plan and how PFRC reactors would be commercialized.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Artemis Internal Science Team: Mission Planning Update

As eloquently outlined in the Artemis III Science Definition Team (A3SDT) Report, the definitive statement of science priorities for the first crewed landing of the Artemis program, the return of astronauts to the surface of the Moon is expected to yield paradigm-shifting scientific advances across a wide array of scientific disciplines while facilitating the creation of a thriving cislunar economy. To help establish a cohesive management for the Artemis campaign, the NASA Science Mission Directorate (SMD) and the Exploration Systems Development Mission Directorate (ESDMD) have established an Artemis Internal Science Team to complement future competed surface geology and payload science teams while executing critical programmatic functions at the point of hardware element interface decisions. Here, we describe aspects of Artemis III mission planning, specifically the current progress towards selection of candidate exploration regions for the Artemis III mission.

Artemis↗

Test Planning Approach and Lessons

As NASA began technology risk reduction activities and planning for the next generation launch vehicle under the Space Launch Initiative (SLI), now the Next Generation Launch Technology (NGLT) Program, a review of past large liquid rocket engine development programs was performed. The intent of the review was to identify any significant lessons from the development testing programs that could be applied to current and future engine development programs. Because the primary prototype engine in design at the time of this study was the Boeing-Rocketdyne RS-84, the study was slightly biased towards LOX/RP-1 liquid propellant engines. However, the significant lessons identified are universal. It is anticipated that these lessons will serve as a reference for test planning in the Engine Systems Group at Marshall Space Flight Center (MSFC). Towards the end of F-1 and J-2 engine development testing, NASA/MSFC asked Rocketdyne to review those test programs. The result was a document titled, Study to Accelerate Development by Test of a Rocket Engine (R-8099). The "intent (of this study) is to apply this thinking and learning to more efficiently develop rocket engines to high reliability with improved cost effectivenes" Additionally, several other engine programs were reviewed - such as SSME, NSTS, STME, MC-1, and RS-83- to support or refute the R-8099. R-8099 revealed two primary lessons for test planning, which were supported by the other engine development programs. First, engine development programs can benefit from arranging the test program for engine system testing as early as feasible. The best test for determining environments is at the system level, the closest to the operational flight environment. Secondly, the component testing, which tends to be elaborate, should instead be geared towards reducing risk to enable system test. Technical risk can be reduced at the component level, but the design can only be truly verified and validated after engine system testing.

Parkinson, Douglas A.↗

Mixing 4D-Equipped and Unequipped Aircraft in the Terminal Area

On-board 4D guidance systems, which predict and control the touchdown time of an aircraft to an accuracy of a few seconds throughout the descent, were developed and demonstrated in several flight test programs. However, in addition to refinements of the on board system, two important issues still need to be considered. First, in order to make effective use of these on-board systems, it is necessary to understand and develop the interactions of the airborne and air traffic control (ATC) system in the proposed advanced environment. Unless the total system is understood, the advanced on-board system may prove unusable from an ATC standpoint. Second, in planning for a future system in which all aircraft are 4D equipped, it is necessary to confront the transition situation in which some percentage of traffic must still be handled by conventional means. In terms of 4D, this means that some traffic must still be given radar vectors and speed clearances (that is, be spaced by conventional distance separation techniques), while the 4D-equipped aircraft need to be issued time assignments. These apparent differences are reconciled and efficient ATC operation is developed.

Tobias, L.↗

Small Spacecraft for Planetary Atmospheric, Surface, and Interior Structure Using Radio Links

Scientific studies using spacecraft radio links have been conducted on almost every Solar System exploration mission in the past five decades and have led to numerous discoveries. Radio Science experiments have elucidated the thermal history of the Moon from high resolution gravitational field measurements, unveiled the interiors of Titan, Enceladus, Mercury, Phobos, Vesta and Ceres providing key evidence for identifying subsurface oceans on icy moons; sounded Titan, Saturn, and Pluto’s atmospheres, and refined models for the atmospheres, surfaces, and interior structure of Mars and Venus. A Juno experiment is in progress measuring the gravitational field of Jupiter to reveal its interior structures, as did a similar recent Cassini experiment with Saturn. Experiments at Mercury, the Jovian system, and other targets, are in development or planning phases. Over the next 30 years, significant advances in radio and laser link-science technologies, including nearly one order of magnitude improvement achievable in range-rate and range accuracy, could enable many new scientific breakthroughs. Future exploration concepts in many cases focus on applications of small spacecraft and can include spacecraft constellations for studies of atmospheric dynamics, interior structures, and surface properties. A set of science-enabling radio link technologies specific to small spacecraft instrumentation on future solar system missions are under study and development. Examples include field tests of radio scattering to determine soil properties, smallsat constellations for dense geographic and temporal atmospheric probing, small science-quality software-defined transponders, miniature ultra-stable oscillators, and advanced radio-metric calibrations at the Deep Space Network. This paper describes many of these technologies and their scientific applications.

Elliott, Harvey↗

Exploration Technologies for Operations

Although the International Space Station (ISS) assembly has been completed, the Operations support teams continue to seek more efficient and effective ways to prepare for and conduct the ISS operations and future exploration missions beyond low earth orbit. This search for improvement has led to a significant collaboration between the NASA research and advanced software development community at NASA Ames Research Center and the Mission Operations community at NASA Johnson Space Center. Since 2001, NASA Ames Research Center has been developing and applying its advanced intelligent systems and human systems integration research to mission operations tools for several of the unmanned Mars missions operations. Since 2006, NASA Ames Research Center has also been developing and applying its advanced intelligent systems and human systems integration research to mission operations tools for manned operations support with the Mission Operations Directorate at NASA Johnson Space Center. This paper discusses the completion of the development and deployment of a variety of intelligent and human systems technologies adopted for manned mission operations. The technologies associated with the projects include advanced software systems for operations and human-centered computing. Human-centered computing looks to the processes and procedures that people do to perform any given job, then attempts to identify opportunities to improve these processes and procedures. In particular, for mission operations, improvements are quantified by specifically identifying how a tool can increase a persons efficiency, enhance a persons functional capability, andor improve the assurance of a persons decisions. The Ames development team has collaborated with the Mission Operations team to identify areas of efficiencies through technology infusion applications in support of the Plan, Train, and Fly activities of human-spaceflight mission operations. The specific applications discussed in this paper are in the areas of mission planning systems, mission operations design modeling and workflow automation, advanced systems monitoring, mission control technologies, search tools, training management tools, spacecraft solar array management, spacecraft power management, and spacecraft attitude planning. We discuss these specific projects between the Ames Research Center and the Johnson Space Centers Mission Operations Directorate, and how these technologies and projects are enhancing the mission operations support for the International Space Station. We also discuss the challenges, problems, and successes associated with long-distance and multi-year development projects between the research team at Ames and the Mission Operations customers at Johnson Space center. Finally, we discuss how these technology infusion applications and underlying technologies might be used in the future to support on-board operations of the crew and spacecraft systems as human exploration expands beyond low earth orbit to destinations in the solar system where communications delays will require more on-board autonomy and planning by the crew. Longer communications delays will require that the ground mission operations support will be primarily strategic in nature, while the tactical level of planning, systems monitoring and control, and failure analysisisolationrecovery will be the responsibility of both the spacecraft autonomous systems and the crew. Our expectation is that the technologies

mission operations↗

Progress and plan of KSTAR plasma control system upgrade

The plasma control system (PCS) has been one of essential systems in annual KSTAR plasma campaigns: starting from a single-process version in 2008, extensive upgrades are done through the previous 7 years in order to achieve major goals of KSTAR performance enhancement. Here, major implementations are explained in this paper. In consequences of successive upgrades, the present KSTAR PCS is able to achieve ~48 s of 500 kA plasma pulses with full real-time shaping controls and real-time NB power controls. It has become a huge system capable of dealing with 8 separate categories of algorithms, 26 actuators directly controllable during the shot, and real-time data communication units consisting of +180 analog channels and +600 digital input/outputs through the reflective memory (RFM) network. The next upgrade of the KSTAR PCS is planned in 2015 before the campaign. An overview of the upgrade layout will be given for this paper. The real-time system box is planned to use the CERN MRG-Realtime OS, an ITER-compatible standard operating system. New hardware is developed for faster real-time streaming system for future installations of actuators/diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗