Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUORIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Tributylphosphate Extraction Behavior of Bismuthate-Oxidized Americium

Higher oxidation states of americium have long been known; however, options for their preparation in acidic solution are limited. The conventional choice, silver-catalyzed peroxydisulfate, is not useful at nitric acid concentrations above about 0.3 M. We investigated the use of sodium bismuthate as an oxidant for Am3+ in acidic solution. Room-temperature oxidation produced AmO2 2+ quantitatively, whereas oxidation at 80 °C produced AmO2+ quantitatively. The efficacy of the method for the production of oxidized americium was verified by fluoride precipitation and by spectroscopic absorbance measurements. We performed absorbance measurements using a conventional 1 cm cell for high americium concentrations and a 100 cm liquid waveguide capillary cell for low americium concentrations. Extinction coefficients for the absorbance of Am3+ at 503 nm, AmO2+ at 514 nm, and AmO2 2+ at 666 nm in 0.1 M nitric acid are reported. We also performed solvent extraction experiments with the hexavalent americium using the common actinide extraction ligand tributyl phosphate (TBP) for comparison to the other hexavalent actinides. Contact with 30% tributyl phosphate in dodecane reduced americium; it was nevertheless extracted using short contact times. The TBP extraction of AmO2 2+ over a range of nitric acid concentrations is shown for the first time and was found to be analogous to that of uranyl, neptunyl, and plutonyl ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heats of Formation of XeF₃⁺, XeF₃⁻, XeF₅⁺, XeF₇⁺, XeF₇⁻,and XeF₈ from High Level Electronic Structure Calculations

Atomization energies at 0 K and heats of formation at 0 and 298 K are predicted for XeF₃⁺, XeF₃⁻, XeF₅⁺, XeF₇⁻, and XeF₈ from coupled cluster theory (CCSD(T)) calculations with effective core potential correlation-consistent basis sets for Xe and including correlation of the nearest core electrons. Additional corrections are included to achieve near chemical accuracy of ±1 kcal/mol. Vibrational zero point energies were computed at the MP2 level of theory. Unlike the other neutral xenon fluorides, XeF₈ is predicted to be thermodynamically unstable with respect to loss of F₂ with the reaction calculated to be exothermic by 22.3 kcal/mol at 0 K. XeF₇⁺ is also predicted to be thermodynamically unstable with respect to the loss of F₂ by 24.1 kcal/mol at 0 K. For XeF₃⁺, XeF₅⁺, XeF₃⁻, XeF₅⁻ and XeF₇⁻, the reactions for loss of F₂ are endothermic by 14.8, 37.8, 38.2, 59.6, and 31.9 kcal/mol at 0 K, respectively. The F⁻ affinities of Xe, XeF₂, XeF₄, and XeF₆ are predicted to be 165.1, 155.3, 172.7, and 132.5 kcal/mol, and the corresponding F⁻ affinities are 6.3, 19.9, 59.1, and 75.0 kcal/mol at 0 K, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mapping the Reaction Coordinates of Enzymatic Defluorination

The carbon-fluorine bond is the strongest covalent bond in organic chemistry, yet fluoroacetate dehalogenases can readily hydrolyze this bond under mild physiological conditions. Elucidating the molecular basis of this rare biocatalytic activity will provide the fundamental chemical insights into how this formidable feat is achieved. Here, we present a series of high-resolution (1.15-1.80 {angstrom}) crystal structures of a fluoroacetate dehalogenase, capturing snapshots along the defluorination reaction: the free enzyme, enzyme-fluoroacetate Michaelis complex, glycolyl-enzyme covalent intermediate, and enzyme-product complex. We demonstrate that enzymatic defluorination requires a halide pocket that not only supplies three hydrogen bonds to stabilize the fluoride ion but also is finely tailored for the smaller fluorine halogen atom to establish selectivity toward fluorinated substrates. We have further uncovered dynamics near the active site which may play pivotal roles in enzymatic defluorination. These findings may ultimately lead to the development of novel defluorinases that will enable the biotransformation of more complex fluorinated organic compounds, which in turn will assist the synthesis, detoxification, biodegradation, disposal, recycling, and regulatory strategies for the growing markets of organofluorines across major industrial sectors.

08 HYDROGEN↗

Radiation induced redox reactions and fragmentation of constituent ions in ionic liquids. I. Anions.

Room temperature ionic liquids (IL) find increasing use for the replacement of organic solvents in practical applications, including their use in solar cells and electrolytes for metal deposition, and as extraction solvents for the reprocessing of spent nuclear fuel. The radiation stability of ILs is an important concern for some of these applications, as previous studies suggested extensive fragmentation of the constituent ions upon irradiation. In the present study, electron paramagnetic resonance (EPR) spectroscopy has been used to identify fragmentation pathways for constituent anions in ammonium, phosphonium, and imidazolium ILs. Many of these detrimental reactions are initiated by radiation-induced redox processes involving these anions. Scission of the oxidized anions is the main fragmentation pathway for the majority of the practically important anions; (internal) proton transfer involving the aliphatic arms of these anions is a competing reaction. For perfluorinated anions, fluoride loss following dissociative electron attachment to the anion can be even more prominent than this oxidative fragmentation. Bond scission in the anion was also observed for NO{sub 3}{sup -} and B(CN){sub 4}{sup -} anions and indirectly implicated for BF{sub 4}{sup -} and PF{sub 6}{sup -} anions. Among small anions, CF{sub 3}SO{sub 3}{sup -} and N(CN){sub 2}{sup -} are the most stable. Among larger anions, the derivatives of benzoate and imide anions were found to be relatively stable. This stability is due to suppression of the oxidative fragmentation. For benzoates, this is a consequence of the extensive sharing of unpaired electron density by the {pi}-system in the corresponding neutral radical; for the imides, this stability could be the consequence of N-N {sigma}{sup 2}{sigma}*{sup 1} bond formation involving the parent anion. While fragmentation does not occur for these 'exceptional' anions, H atom addition and electron attachment are prominent. Among the typically used constituent anions, aliphatic carboxylates were found to be the least resistant to oxidative fragmentation, followed by (di)alkyl phosphates and alkanesulfonates. The discussion of the radiation stability of ILs is continued in the second part of this study, which examines the fate of organic cations in such liquids.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Bond Energies in Models of the Schrock Metathesis Catalyst

Heats of formation, adiabatic and diabatic bond dissociation energies (BDEs) of the model Schrock-type metal complexes M(NH)(CRR)(OH)₂ (M = Cr, Mo, W; CRR = CH₂, CHF, CF₂) and MO₂(OH)₂ compounds, and Brønsted acidities and fluoride affinities for the M(NH)(CH₂)(OH) ₂ transition metal complexes are predicted using high level CCSD(T) calculations. The metallacycle intermediates formed by reaction of C₂H4 with M(NH)-(CH₂)(OH)2 and MO₂(OH)₂ are investigated at the same level of theory. Additional corrections were added to the complete basis set limit to obtain near chemical accuracy ((1 kcal/mol). A comparison between adiabatic and diabatic BDEs is made and provides an explanation of trends in the BDEs. Electronegative groups bonded on the carbenic carbon lead to less stable Schrock-type complexes as the adiabatic BDEs ofMdCF₂ andMdCHF bonds are much lower than theMdCH₂ bonds. The Cr compounds have smaller BDEs than theWorMo complexes and should be less stable. Different M(NH)(OH)₂(C₃H₆) and MO(OH)₂(OC₂H4) metallacycle intermediates are investigated, and the lowest-energy metallacycles have a square pyramidal geometry. The results show that consideration of the singlet_triplet splitting in the carbene in the initial catalyst as well as in the metal product formed by the retro [2+2] cycloaddition is a critical component in the design of an effective olefin metathesis catalyst in terms of the parent catalyst and the groups being transferred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation Potentials of Functionalized Sulfone Solvents for High-Voltage Li-Ion Batteries: A Computational Study

New electrolytes with large electrochemical windows are needed to meet the challenge for high-voltage Li-ion batteries. Sulfone as an electrolyte solvent boasts of high oxidation potentials. Here we examine the effect of multiple functionalization on sulfone's oxidation potential. We compute oxidation potentials for a series of sulfone-based molecules functionalized with fluorine, cyano, ester, and carbonate groups by using a quantum chemistry method within a continuum solvation model. We find that multifunctionalization is a key to achieving high oxidation potentials. This can be realized through either a fluorether group on a sulfone molecule or sulfonyl fluoride with a cyano or ester group.

25 ENERGY STORAGE↗

Formation and Luminescence Phenomena of LaF3:Ce3+ Nanoparticles and Lanthanide-Organic Compounds in Dimethyl Sulfoxide

LaF3:Ce3+ doped nanoparticles were synthesized at different temperatures in dimethyl sulfoxide by the chemical reaction of lanthanum nitrate hydrate and cerium nitrate hexahydrate with ammonium fluoride. The formation of Ce3+ doped LaF3 nanoparticles is confirmed by X-ray diffraction and high resolution transmission electron microscopy. An intense emission at around 310 nm from the d - f transition of Ce3+ was observed from the LaF3:Ce3+ powder samples. However, in solution samples, the ultraviolet emission from Ce3+ is mostly absent, but intense luminescence is observed in the visible range from blue to red. The emission wavelength of the solution samples is dependent on the reaction time and temperature. More interestingly, the emission wavelength varies with the excitation wavelength. Most likely, this emission is from the metalorganic compounds of Ce3+ or La3+ and DMSO as similar phenomena are also observed when lanthanum nitrate hydrate or cerium nitrate hexahydrate are heated in DMSO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Five-volt-class high-capacity all-solid-state lithium batteries

Advances in battery technology have been impeded by the voltage constraints of electrolytes. Here, in this study, we present a high-energy all-solid-state battery design featuring >5 V operation and an ultrahigh areal capacity of 35.3 mAh cm −2 ; these attributes were enabled by a highly conductive and ultrahigh-voltage stable fluoride solid electrolyte, LiCl–4Li 2 TiF 6 (1.7 × 10 −5 S cm −1 at 30 °C). LiCl–4Li 2 TiF 6 shields high-voltage spinel oxide cathodes, achieving 106 mAh g −1 at 2C with 75.2% retention over 500 cycles for LiNi 0.5 Mn 1.5 O 4 , sharply contrasting with the conventional LiNbO 3 counterpart, which decomposes and fails to prevent detrimental interfacial degradation. The efficacy of LiCl–4Li 2 TiF 6 is validated across various systems, including LiCoMnO 4 , LiFe 0.5 Mn 1.5 O 4 and pouch-type LiNi 0.5 Mn 1.5 O 4 ||Li (or Ag–C) all-solid-state batteries, and further demonstrated by operability down to 2.3 V with 258 mAh g −1 and ultrathick 1.8-mm electrodes. This shielding layer with >5 V stability introduces a transformative design paradigm by revisiting the previously forbidden high-voltage cathodes.

36 MATERIALS SCIENCE↗

Factors Affecting the Battery Performance of Anthraquinone-based Organic Cathode Materials

Two organic cathode materials based on poly(anthraquinonyl sulfide) structure with different substitution positions were synthesized and their electrochemical behavior and battery performances were investigated. The substitution positions on the anthraquinone structure, binders for electrode preparation and electrolyte formulations have been found to have significant effects on the battery performances of such organic cathode materials. The substitution position with less steric stress has higher capacity, longer cycle life and better high-rate capability. Polyvinylidene fluoride binder and ether-based electrolytes are favorable for the high capacity and long cycle life of the quinonyl organic cathodes.

36 MATERIALS SCIENCE↗

A functional SrF 2 coated separator enabling a robust and dendrite-free solid electrolyte interphase on a lithium metal anode

An unstable solid electrolyte interphase (SEI) and accompanying Li metal dendrites are the key impediments to commercialization of high-energy lithium metal batteries (LMBs). We employ a strontium fluoride (SrF 2 ) microsphere coated polypropylene (PP) separator to stabilize the SEI and to prevent dendrites from growing. This approach is tested with Li∥Cu half-cells, Li∥Li symmetrical cells, and Li∥NMC full LMBs, there being a major improvement in each case. The Li∥Cu cell with SrF 2 maintains a stable coulombic efficiency (CE) of 80% after 100 cycles, when tested at 0.25 mA cm -2 to a capacity of 0.5 mA h cm -2 . By comparison, the uncoated PP reference has a CE of 10% in cycle 60. The Li∥Li cell with SrF 2 exhibits a markedly smaller voltage polarization and is able to stably cycle for approximately 340 h vs. the reference which begins to display severe voltage instability at 200 h. The Li∥NMC full LMB with SrF 2 shows an initial discharge capacity of 173 mA h g -1 , with 167 mA h g -1 (96.5%) being retained after 200 cycles at 200 mA g -1 (1C rate). The SrF 2 containing LMB also has a substantially improved rate capability over the reference, the difference being drastic even at the highest testing rate of 20C. First-principles calculations based on DFT indicate that lithium ions prefer to adsorb onto the SrF 2 surface, which should create a more uniform ion flux and reduce the propensity for dendrite nucleation. Finally in parallel, the SrF 2 spheres bind with the SEI layer, creating a tough in situ formed composite membrane that mechanically stabilizes a planar metal interface.

25 ENERGY STORAGE↗

Upconversion in Nd{sup 3+}-doped glasses: Microscopic theory and spectroscopic measurements

In this work, we report a systematic investigation of upconversion losses and their effects on fluorescence quantum efficiency and fractional thermal loading in Nd{sup 3+}-doped fluoride glasses. The energy transfer upconversion ({gamma}{sub up}) parameter, which describes upconversion losses, was experimentally determined using different methods: thermal lens (TL) technique and steady state luminescence (SSL) measurements. Additionally, the upconversion parameter was also obtained from energy transfer models and excited state absorption measurements. The results reveal that the microscopic treatment provided by the energy transfer models is similar to the macroscopic ones achieved from the TL and SSL measurements because similar {gamma}{sub up} parameters were obtained. Besides, the achieved results also point out the migration-assisted energy transfer according to diffusion-limited regime rather than hopping regime as responsible for the upconversion losses in Nd-doped glasses.

36 MATERIALS SCIENCE↗

Single shot dynamic ellipsometry mesaurements of laser-driven shock waves

A technique has been developed to measure the time-resolved position of a laser-driven shock wave and the subsequent material flow. Ultrafast dynamic ellipsometry, using a chirped femtosecond laser pulse, probes picosecond material dynamics in a single shot by capitalizing on the refractive index changes in the shocked material. For transparent materials, the shock velocity, the particle velocity, and the shocked material's refractive index are extracted. Hugoniot data for poly(chlorotrifluoroethylene-co-vinylidene fluoride) (Kel-F 800) was obtained using ultrafast dynamic ellipsometry, and the data agrees well with previous data on macroscopic samples obtained in plate impact gas gun experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fabrication and magnetism of Fe{sub 65}Co{sub 35}-MgF{sub 2} granular films for high frequency application

A series of (Fe{sub 65}Co{sub 35}){sub x}(MgF{sub 2}){sub 1-x} films with different metal volume fraction x was fabricated by magnetron sputtering. High resolution transmission electron micrographs show that the film consists of bcc Fe{sub 65}Co{sub 35} particles uniformly embedded in an amorphous insulating MgF{sub 2} matrix with particle size around a few nanometers. The research results reveal that high sputtering power (200 W) leads to the occurrence of FeCo fluorides, which are harmful to soft magnetic properties. For the samples fabricated using 60 W, good soft magnetic properties have been obtained in a wide x range (x=0.9-0.55), with H{sub c} not exceeding 10 Oe, along with high resistivity. In particular, for the sample with x=0.62, coercivities in hard and easy axes are 0.6 and 7.2 Oe, respectively, 4{pi}M{sub s}=11.5 kG, and {rho} reaches 2.53 m{omega} cm. The dependence of complex permeability {mu}={mu}{sup '}-j{mu}{sup '} on frequency shows that the real part {mu}{sup '} is more than 100 below 1.0 GHz and ferromagnetic resonance frequency reaches 2.35 GHz. The excellent soft magnetic property is ascribed to the exchange coupling among magnetic granules.

36 MATERIALS SCIENCE↗

Experimental investigation of ultraviolet laser induced plasma density and temperature evolution in air

We present measurements and analysis of laser induced plasma neutral densities and temperatures in dry air by focusing 200 mJ, 10 MW high power, 193 nm ultraviolet ArF (argon fluoride) laser radiation to a 30 {mu}m radius spot size. We examine these properties that result from multiphoton and collisional cascade processes for pressures ranging from 40 Torr to 5 atm. A laser shadowgraphy diagnostic technique is used to obtain the plasma electron temperature just after the shock front and this is compared with optical emission spectroscopic measurements of nitrogen rotational and vibrational temperatures. Two-color laser interferometry is employed to measure time resolved spatial electron and neutral density decay in initial local thermodynamic equilibrium (LTE) and non-LTE conditions. The radiating species and thermodynamic characteristics of the plasma are analyzed by means of optical emission spectroscopy (OES) supported by SPECAIR, a special OES program for air constituent plasmas. Core plasma rotational and vibrational temperatures are obtained from the emission spectra from the N{sub 2}C-B(2+) transitions by matching the experimental spectrum results with the SPECAIR simulation results and the results are compared with the electron temperature just behind the shock wave. The plasma density decay measurements are compared with a simplified electron density decay model that illustrates the dominant three-and two-body recombination terms with good correlation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of microwave plasma torch operating at a low pressure

A microwave plasma torch system is attached to a low-pressure chamber in this study. The electric field induced in a quartz discharge tube by microwave radiation breaks down the gas at a sufficiently low pressure, igniting the plasma, which is continuously sustained by the microwave radiation. The plasma profile at a very low pressure is shown to be asymmetric with higher density on the incoming side of the microwaves. The gas temperature at the bright spot of the torch plasma measured via the optical emission from hydroxide radicals is shown to increase drastically upon high-pressure operation as the microwave power increases. The electron density at the torch flame is measured by recording the Stark broadening of the hydrogen Balmer beta line. The plasma density increases as the microwave power increases. The typical argon plasma density of a plasma torch powered at 500 W under a pressure of 150 Torr is on the order of 10{sup 14}/cm{sup 3}. The electron temperature in the argon torch plasma was estimated to be 1.5 eV, thereby effectively exciting the molecules in the torch gas. Disintegration of nitrogen fluoride (NF{sub 3}) indicates that a microwave plasma torch operating at a low pressure can efficiently generate an abundant amount of chemical radicals.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Increase of Boron Ion Beam Current Extracted from a Multi-Cusp Ion Source in an Ion Doping System with Mass Separation

A multi-cusp ion source with large area extraction area has a capacity to extract high current ion beams. However it is difficult to obtain high current boron ion beams from boron trifluoride plasma as input power density is low and BF{sub 2}{sup +} is a main ion species. It was found that fluoride ion currents were selectively decreased by applying positive potential to a plasma electrode with respect to a plasma chamber. Using this method to a multi-cusp ion source with adequate magnet configuration, high current boron ion beams of 500 {mu}A/cm were obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tungsten Transport in an Ion Source

We present a study that gives a deeper insight into the failure mechanism of tungsten ion sources used for ion implantation in the semiconductor industry. Our experimental data, corroborated by literature thermodynamics reports, indicates that tungsten migration is the primary cause of failure for processes utilizing fluorine-containing feed gases. It is shown that tungsten is the predominant constituent of most deposits, and that volatile tungsten fluorides are the transport species responsible for metal redistribution in ion sources. It was also demonstrated that AutoClean, a new product of ATMI, can be used for filament growth control.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of Radiation Energy Response for Thermoluminescent Dosimeter TLD-100: Determination of Organ Dose in Diagnostic Radiology

TLD-100 (thermoluminescent dosimeter) cards (chips) were calibrated using X-rays with energies of 25-250 kV produced by a Cs-137 source. The energy responses of lithium fluoride crystals for different energies of X-rays were studied. QA/QC was then performed in the Albanian Ionizing Radiation Metrology Laboratory. Based on the QA/QC results, the chips were used to study the doses to different organs in diagnostic radiology. Organ dose was evaluated after calculation of e dose in air (Kair), using an ionizing chamber.

61 RADIATION PROTECTION AND DOSIMETRY↗