Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Guidelines for carbon dioxide capture, transport and storage

The goal of this effort was to develop a set of preliminary guidelines and recommendations for the deployment of carbon capture and storage (CCS) technologies in the United States. The CCS Guidelines are written for those who may be involved in decisions on a proposed project: the developers, regulators, financiers, insurers, project operators, and policymakers. Contents are: Part 1: introduction; Part 2: capture; Part 3: transport; Part 4; storage; Part. 5 supplementary information. Within these parts, eight recommended guidelines are given for: CO{sub 2} capture; ancillary environmental impacts from CO{sub 2}; pipeline design and operation; pipeline safety and integrity; siting CO{sub 2} pipelines; pipeline access and tariff regulation; guidelines for (MMV); risk assessment; financial responsibility; property rights and ownership; site selection and characterisation; injection operations; site closure; and post-closure. 18 figs., 9 tabs., 4 apps.

01 COAL, LIGNITE, AND PEAT↗

How can environmental regulations promote clean coal technology adoption in APEC developing economies?

The study examines both existing and emerging regulatory frameworks in order to determine which type of regulations that would be most effective at promoting clean coal technology adoption in development Asia Pacific Economic Co-operation (APEC) economies and would be practical to implement. regulations targeting air emissions; regulations targeting water use; and regulations concerning coal combustion by-products. When considering the potential effect of existing and new environmental regulations on the adoption of clean coal the analysis of technologies was organised into three categories: environmental control technologies; high efficiency coal combustion technologies; and carbon dioxide capture and storage (CCS). To target the recommendations towards APEC economies that would benefit the most from this analysis, the study focused on developing and transition APEC economies that are expected to rely on coal for a large part of their future generating capacity. These economies include China, Indonesia, the Philippines, the Russian Federation, Thailand, and Vietnam. ACARP provided funding to this study, under Project C15078. 10 figs., 14 tabs., 10 apps.

20 FOSSIL-FUELED POWER PLANTS↗

A resource and technology assessment of coal utilization in India

Electricity production in India is projected to expand dramatically in the near term to energize new industrial development, while also easing the energy shortages throughout the country. Much of the new growth in electricity production will be fueled by domestic coal resources; however, there is worldwide concern about increased coal use, as greater carbon dioxide emissions from coal combustion will exacerbate climate change. At the same time, there are now a number of different existing and emerging technological options for coal conversion and greenhouse gas (GHG) reduction worldwide that could potentially be useful for the Indian coal-power sector. This paper reviews coal utilization in India and examines current and emerging coal power technologies with near- and long-term potential for reducing greenhouse gas emissions from coal power generation. 107 refs., 8 figs., 6 tabs.

01 COAL, LIGNITE, AND PEAT↗

A performance standards approach to reducing CO{sub 2} emissions from electric power plants

The CO{sub 2} emission performance standard policies outlined in this paper could complement a cap-and-trade program that puts a price on carbon and serve to significantly reduce the CO{sub 2} emissions from coal use for electricity generation. Emission performance standards have a long history in the United States and have been successfully used to control emissions of various air pollutants from electric generators. This paper explores the rationale for using emission performance standards and describes the various types of performance standard policies. Emission performance standards that address CO{sub 2} emissions could promote the deployment of carbon capture and storage technology coupled with new and existing coal-fueled electric power plants. 28 refs., 4 figs., 4 tabs.

01 COAL, LIGNITE, AND PEAT↗

Simplified model for determining local heat flux boundary conditions for slagging wall

In this work, two models for calculating heat transfer through a cooled vertical wall covered with a running slag layer are investigated. The first one relies on a discretization of the velocity equation, and the second one relies on an analytical solution. The aim is to find a model that can be used for calculating local heat flux boundary conditions in computational fluid dynamics (CFD) analysis of such processes. Two different cases where molten deposits exist are investigated: the black liquor recovery boiler and the coal gasifier. The results show that a model relying on discretization of the velocity equation is more flexible in handling different temperature-viscosity relations. Nevertheless, a model relying on an analytical solution is the one fast enough for a potential use as a CFD submodel. Furthermore, the influence of simplifications to the heat balance in the model is investigated. It is found that simplification of the heat balance can be applied when the radiation heat flux is dominant in the balance. 9 refs., 7 figs., 10 tabs.

01 COAL, LIGNITE, AND PEAT↗

Experimental study on NOx emission and unburnt carbon of a radial biased swirl burner for coal combustion

Pilot tests were carried out on a 1 MW thermal pulverized coal fired testing furnace. Symmetrical combustion was implemented by use of two whirl burners with dual air adjustment. The burnout air device was installed in various places at the top of the main burner, which consists of a primary air pipe with a varying cross-section and an impact ring. In the primary air pipe, the air pulverized coal (PC) stream was separated into a whirling stream that was thick inside and thin outside, thus realizing the thin-thick distribution at the burner nozzle in the radial direction. From the comparative combustion tests of three coals with relatively great characteristic differences, Shaanbei Shenhua high rank bituminous coal (SH coal), Shanxi Hejin low rank bituminous coal (HJ coal), and Shanxi Changzhi meager coal (CZ coal), were obtained such test results as the primary air ratio, inner secondary air ratio, outer secondary air ratio, impact of the change of outer secondary air, change of the relative position for the layout of burnout air, change of the swirling intensity of the primary air and secondary air, etc., on the NOx emission, and unburnt carbon content in fly ash (CFA). At the same time, the relationship between the NOx emission and burnout ratio and affecting factors of the corresponding test items on the combustion stability and economic results were also acquired. The results may provide a vital guiding significance to engineering designs and practical applications. According to the experimental results, the influence of each individual parameter on NOx formation and unburned carbon in fly ash agrees well with the existing literature. In this study, the influences of various combinations of these parameters are also examined, thus providing some reference for the design of the radial biased swirl burner, the configuration of the furnace, and the distribution of the air. 23 refs., 14 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Desulfurization behavior of iron-based sorbent with MgO and TiO{sub 2} additive in hot coal gas

The sulfidation behaviors of iron-based sorbent with MgO and MgO-TiO{sub 2} are studied under different isothermal conditions from 623 to 873 K in a fixed bed reactor. The results of sorbents sulfidation experiments indicate that the sorbents with MgO and TiO{sub 2} additives are more attractive than those without additives for desulfurization of hot coal gas. The sulfur capacity (16.17, 18.45, and 19.68 g S/100 g sorbent) of M1F, M3F, and M5F sorbent containing 1, 3, and 5% MgO, respectively, is obviously bigger than that (15.02 g S/100 g sorbent) of M0F without additive. The feasible sulfidation temperature range for M3F sorbent is 773-873 K. The M3F sorbent is optimally regenerated at the temperature of 873 K, under the gas containing 2% oxygen, 15% steam and N{sub 2}, in the space velocity of 2500 h{sup -1}. The sorbent regenerated is also well performed in the second sulfidation (the effective sulfur capacities of 17.98 g S/100 g sorbents and the efficiency of removal sulfur of 99%). The capacity to remove sulfur decreases with steam content increasing in feeding gas from 0 to 10%, but it can restrain the formation of carbon and iron carbide. The addition of TiO{sub 2} in sorbent can shift the optimal sulfidation temperature lower. The iron-based sorbent with 3% MgO and 10% TiO{sub 2} (MFT) is active to the deep removal of H{sub 2}S and COS, especially in the temperature range of 673-723 K. The sulfur removal capacity of MFT sorbent is 21.60 g S/100 g sorbent. 16 refs., 12 figs., 8 tabs.

01 COAL, LIGNITE, AND PEAT↗

Effect of thermal treatment on coke reactivity and catalytic iron mineralogy

Iron minerals in coke can catalyze its gasification and may affect coke behavior in the blast furnace. The catalytic behavior of iron depends largely upon the nature of the iron-bearing minerals. To determine the mineralogical changes that iron could undergo in the blast furnace, cokes made from three coals containing iron present in different mineral forms (clays, carbonates, and pyrite) were examined. All coke samples were heat-treated in a horizontal furnace at 1373, 1573, and 1773 K and then gasified with CO{sub 2} at 1173 K in a fixed bed reactor (FBR). Coke mineralogy was characterized using quantitative X-ray diffraction (XRD) analysis of coke mineral matter prepared by low-temperature ashing (LTA) and field emission scanning electron microscopy combined with energy dispersive X-ray analysis (FESEM/EDS). The mineralogy of the three cokes was most notably distinguished by differing proportions of iron-bearing phases. During heat treatment and subsequent gasification, iron-containing minerals transformed to a range of minerals but predominantly iron-silicides and iron oxides, the relative amounts of which varied with heat treatment temperature and gasification conditions. The relationship between initial apparent reaction rate and the amount of catalytic iron minerals - pyrrhotite, metallic iron, and iron oxides - was linear and independent of heat treatment temperature at total catalyst levels below 1 wt %. The study showed that the coke reactivity decreased with increasing temperature of heat treatment due to decreased levels of catalytic iron minerals (largely due to formation of iron silicides) as well as increased ordering of the carbon structure. The study also showed that the importance of catalytic mineral matter in determining reactivity declines as gasification proceeds. 37 refs., 13 figs., 7 tabs.

01 COAL, LIGNITE, AND PEAT↗

Syngas chemical looping gasification process: oxygen carrier particle selection and performance

The syngas chemical looping (SCL) process coproduces hydrogen and electricity. The process involves reducing metal oxides with syngas followed by regeneration of reduced metal oxides with steam and air in a cyclic manner. Iron oxide is determined to be a desired oxygen carrier for hydrogen production considering overall properties including oxygen carrying capacity, thermodynamic properties, reaction kinetics, physical strength, melting points, and environmental effects. An iron oxide based particle can maintain good reactivity for more than 100 reduction-oxidation (redox) cycles in a thermogravimetric analyzer (TGA). The particle exhibits a good crushing strength (>20 MPa) and low attrition rate. Fixed bed experiments are carried out which reaffirm its reactivity. More than 99.75% of syngas is converted during the reduction stage. During the regeneration stage, hydrogen with an average purity of 99.8% is produced. 23 refs., 6 figs., 10 tabs.

01 COAL, LIGNITE, AND PEAT↗

Efficient capture of CO{sub 2} from simulated flue gas by formation of TBAB or TBAF semiclathrate hydrates

Capturing CO{sub 2} by forming hydrate is an attractive technology for reducing the greenhouse effect. The most primary challenges are high energy consumption, low hydrate formation rate, and separation efficiency. This work presents efficient capture of CO{sub 2} from simulated flue gas (CO{sub 2} (16.60 mol %)/N{sub 2} binary mixtures) by formation of semiclathrate hydrates at 4.5 and 7.1{sup o}C and feed pressures ranging from 2.19 to 7.31 MPa. The effect of 0.293 mol % tetra-n-butyl ammonium bromide (TBAB) and tetra-n-butyl ammonium fluoride (TBAF) on the hydrate formation rate, reactor space velocity, and CO{sub 2} separation efficiency was studied in a 1 L stirred reactor. The results showed the hydrate formation rate constant increased with increasing feed pressure and reached the maximum at 2.82 x 10{sup -7} mol{sup 2}/(s.J) with TBAB and 8.26 x 10{sup -7} mol{sup 2}/(s.J) with TBAF. The space velocity of the hydrate reactor increased with increasing feed pressure and reached a maximum of 13.46 h{sup -1} with TBAB and 25.96 h{sup -1} with TBAF. CO{sub 2} recovery was about 50%, and the optimum CO{sub 2} separation factor with TBAF was 36.98, which was about 4 times higher than that with TBAB in the range of feed pressure. CO{sub 2} could be enriched to 90.40 mol % from simulated flue gas under low feed pressure by two stages of hydrate separation with TBAF. The results demonstrated that TBAB, especially TBAF, could accelerate hydrate formation. The space velocity of the hydrate reactor with TBAB or TBAF was higher than that with THF. CO{sub 2} could be easily enriched in the hydrate phase by two stages of hydrate separation under gentle conditions. 27 refs., 8 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Ventilation planning at Energy West's Deer Creek mine

In 2004 ventilation planning was initiated to exploit a remote area of Deer Creek mine's reserve (near Huntington, Utah), the Mill Fork Area, located under a mountain. A push-pull ventilation system was selected. This article details the design process of the ventilation system upgrade, the procurement process for the new fans, and the new fan startup testing. 5 figs., 1 photo.

01 COAL, LIGNITE, AND PEAT↗

Optimized controls for thickeners

Tailings thickeners are often run inefficiently as they lack a reliable bed level interface transmitter and a turbidity transmitter to give feedback on how the flocculant dosing system is working. Hawk Measurement Systems has developed a range of multiple crystal array sonar transducers capable of penetrating suspended solids to give reliable performance measuring the heavy density bed level. The second channel can be used to give turbidity output. In a case study reported, the system was provided for a coal preparation plant processing multiple coal types with different settling characteristics. 1 fig., 3 photos

01 COAL, LIGNITE, AND PEAT↗

Coal without carbon: an investment plan for federal action

This study examines several technologies for CCS that are not currently receiving adequate development support but that could - in the right policy environment - provide the kind of significant cost reductions (and significant improvements in efficiency) that could greatly accelerate broad, economically attractive CCS deployment. Clean Air Task Force selected these technology areas (though not the technologies themselves) and solicited reports from experts in each field to explore how these technologies might fit into a broader CCS deployment strategy. Each expert was asked to develop a research, development, and demonstration (RD&D) 'road map' that could efficiently move each technology from the laboratory into the commercial mainstream. Because the chapter authors are either technical experts or commercial players and are not, for the most part, energy policy experts, subsequent work will translate their RD&D recommendations into actionable policy proposals. The heart of this report consists of four chapters on advanced coal and CCS technologies: underground coal gasification (UCG), written by Julio Friedmann at Lawrence Livermore National Laboratory; Next generation coal gasification (surface-based gasification) led by Eric Redman at Summit Power Group; Advanced technologies for post-combustion capture (PCC) of CO{sub 2}, led by Howard Herzog at Massachusetts Institute of Technology; and RD&D to speed commercialization of geological CO{sub 2} sequestration (GCS), led by Julio Friedmann. 12 refs., 5 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

How new coal plants help achieve environmental goals

A compelling case can be made for building more coal plants to reduce CO{sub 2}. If all the existing coal-fired power plants are replaced by new ultra-supercritical plants, there would be a reduction in coal use and greenhouse gases of 30% and the US could easily meet the 2020 goals. If coal plants co-fired 15% biomass, the total reduction would be 45%. If the waste heat is efficiently utilized there is another 20% gain. This is even before you consider the use of electricity to replace gasoline in cars or carbon capture and sequestration. When you add it all together there is a strong case that coal can contribute to a big reduction in CO{sub 2}. The author advocates that it can be part of the solution and not the problem. 3 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Improving pumping system efficiency at coal plants

The industry must employ ultramodern technologies when building or upgrading power plant pumping systems thereby using fuels more efficiently. The article discusses the uses and efficiencies of positive displacement pumps, centrifugal pumps and multiple screw pumps. 1 ref., 4 figs.

20 FOSSIL-FUELED POWER PLANTS↗

Fuel blending with PRB coal

Many methods exist to accomplish coal blending at a new or existing power plant. These range from a basic use of the secondary (emergency) stockout/reclaim system to totally automated coal handling facilities with segregated areas for two or more coals. Suitable choices for different sized coal plant are discussed, along with the major components of the coal handling facility affected by Powder River Basin coal. 2 figs.

01 COAL, LIGNITE, AND PEAT↗

Key condenser failure mechanisms

Eight practical lessons highlight many of the factors that can influence condenser tube corrosion at coal-fired utilities and the effects contaminant in-leakage can have on steam generating units. 1 ref., 4 figs.

01 COAL, LIGNITE, AND PEAT↗