Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Edge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Experimental Investigation of a Flexible Wing with a Variable Camber Continuous Trailing Edge Flap Design

This paper presents experimental results of a flexible wing wind tunnel model with a variable camber continuous trailing edge flap (VCCTEF) design for drag minimization, tested at the University of Washington Aeronautical Labo- ratory (UWAL). The wind tunnel test was designed to explore the relative merit of the VCCTEF concept for improved cruise efficiency through the use of low-cost aeroelastic model test techniques. The flexible wing model is a 10-scaled model of a typical transport wing and is constructed of woven fabric composites and foam core. The wing structural stiffness in bending is tailored to be half of the stiffness of a Boeing 757-era transport wing, while the torsional stiffness is about the same. This stiffness reduction results in a wing tip deflection of about 10 of the wing semi-span. The VCCTEF is a multi-segment flap design having three chordwise camber segments and five spanwise flap sections for a total of 15 individual flap elements. The three chordwise camber segments can be positioned appropriately to create a desired trailing edge camber. Elastomeric material is used to cover the gaps in between the spanwise flap sections, thereby creating a continuous trailing edge. Wind tunnel data indicate a high degree of data correlation and repeata- bility. The VCCTEF can achieve a drag reduction of up to 6.31 and an improvement in the lift-to-drag ratio (LD) of up to 4.85. The paper also presents two methods for estimating the lift coefficient of a rigid wing using a dynamic pressure correction and an aeroelastic deflection correction. Both methods provide good estimates of the rigid-wing lift coefficient.

Aerodynamics↗

Polymer Infused Composite Metal Foam as a Potential Aircraft Leading Edge Material

The leading edge of the aircraft wings must be free from three-dimensional disturbances caused by insect adhesion, ice accretion, and particle wear in order to improve flight performance, safety, and fuel efficiency of the aircraft. An innovative solution was explored in this work by infusing stainless steel composite metal foam (SS CMF) with a hydrophobic epoxy resin system. S-S CMF was made with 100% stainless steel using a powder metallurgy technique. The infused epoxy filled the macro- and microporosities, unique to SS CMF’s structure, creating a product with a density similar to that of aluminum. The contact angle, wear rate, erosion resistance, and insect adhesion of the novel infused composite metal foam were measured and compared to aluminum, epoxy and stainless steel. The infusion process was determined to fill up to 88% of the pores within the SS CMF and was found to reduce wettability and insect residue accretion. The contact angle of the infused SS CMF was 43% higher than its parent material, stainless steel, and 130% higher than aluminum. Insect residue maximum height and areal coverage were reduced by 60 and 30%, respectively, compared to aluminum. Grit blast experiments to simulate erosion resulted in a greater roughness increase for aluminum than for the parent epoxy resin or the resin-infused SS CMF. These results suggest that the durability and performance of infused SS CMF was superior compared to aluminum, which is the current leading edge material of choice. Based on the promising results under relevant wear and erosion conditions, it is concluded that the infused SS CMF can offer a potential tailored replacement to aluminum leading edge material.

Jacob C. Marx↗

Enhanced Habitability on High Obliquity Bodies Near the Outer Edge of the Habitable Zone of Sun-Like Stars

High obliquity planets represent potentially extreme limits of terrestrial climate, as they exhibit large seasonality, a reversed annual-mean pole-to-equator gradient of stellar heating, and novel cryospheres. A suite of 3-D global climate model simulations with a dynamic ocean is performed with Earthlike atmospheres for low and high obliquity planets with various stellar fluxes, CO2 concentrations, and initial conditions to explore the propensity for high obliquity climates approaching the outer edge of the Habitable Zone to undergo global glaciation. We also simulate planets with thick CO2 or H2 atmospheres, such as those expected to develop near or beyond the outer edge of the Habitable Zone. We show that high obliquity planets are hotter than their low obliquity counterparts due to ice-albedo feedbacks for cold climates, and water vapor in warm climates. We suggest that the water vapor greenhouse trapping is greater on high obliquity bodies due to the different dynamical regimes that occur between the two states. While equatorial ice-belts are stable at high obliquity in some climate regimes, it is harder to achieve global glaciation than for a low obliquity planet. Temperate polar conditions can be present at high obliquity at forcings for which low obliquity planets would be in a hard snowball state. We suggest the conditions on high obliquity planets are likely to be more favorable for a robust biosphere to develop approaching the outer edge of the HZ. However, the influence of obliquity diminishes for dense atmospheres, in agreement with calculations from 1-D Energy Balance Models.

planets and satellites: atmospheres↗

Effects of Spin-Orbit Resonances and Tidal Heating on the Inner Edge of the Habitable Zone

Much attention has been given to the climate dynamics and habitable boundaries of synchronously rotating planets around low mass stars. However, other rotational states are possible, including spin–orbit resonant configurations, particularly when higher eccentricity orbits can be maintained in a system. Additionally, the oscillating strain as a planet moves from periastron to apoastron results in friction and tidal heating, which can be an important energy source. Here, we simulate the climate of ocean-covered planets near the inner edge of the habitable zone around M to solar stars with the NASA GISS ROCKE-3D general circulation model, and leverage the planetary evolution software package, VPLanet, to calculate tidal heating rates for Earth-sized planets orbiting 2600 and 3000 K stars. This study is the first to use a 3D general circulation model that implements tidal heating to investigate habitability for multiple resonant states. We find that for reference experiments without tidal heating, the resonant state has little impact on the radial position of the inner edge because for a given stellar flux, higher-order states tend to be warmer than synchronous rotators, but for a given temperature, have drier upper atmospheres. However, when strong tidal heating is present, the rotational component implies a strong dependence of habitable conditions on the system evolution and rotational state. Since tidal and stellar heating both decrease rapidly with orbital distance, this results in a compact orbital width separating temperate and uninhabitable climates. We summarize these results and also compare ROCKE-3D to previously published simulations of the inner edge.

Spin-Orbit Resonances↗

A Simulated Fire Edge Vis-IR Detection and Tracking Approach for Autonomous sUAS in STEReO

This study presents a fire edge detection and tracking methodology for an autonomous small UAS (sUAS). The sUAS, onboard sensors, and wildfire are simulated to evaluate the methodology. A visible light (Vis) camera and an infrared (IR) camera are simulated onboard the sUAS to identify burnt, burning, and unburnt areas on a static wildfire bitmap. After differentiating between these areas, a form of nonlinear guidance law (NLGL) is used to generate virtual target points (VTP) that guide the sUAS so that the fire edge is kept within the camera FOV. The VTP are passed to the sUAS flight management system (FMS) in the form of waypoints. The approach was tested in simulation and demonstrated tracking curved, sharp, and linear fire edge shapes at different altitudes. Higher altitude tracking proved to demand the least control effort without sacrificing continuous tracking.

Autonomous UAV↗

Differences in Water Vapor Radiative Transfer Among 1D Models Can Significantly Affect the Inner Edge of the Habitable Zone

An accurate estimate of the inner edge of the habitable zone is critical for determining which exoplanets are potentially habitable and for designing future telescopes to observe them. Here, we explore differences in estimating the inner edge among seven one-dimensional radiative transfer models: two line-by-line codes (SMART and LBLRTM) as well as five band codes (CAM3, CAM4_Wolf, LMDG, SBDART, and AM2) that are currently being used in global climate models. We compare radiative fluxes and spectra in clear-sky conditions around G and M stars, with fixed moist adiabatic profiles for surface temperatures from 250 to 360 K. We find that divergences among the models arise mainly from large uncertainties in water vapor absorption in the window region (10 μm) and in the region between 0.2 and 1.5 μm. Differences in outgoing longwave radiation increase with surface temperature and reach 10–20Wm(exp −2); differences in shortwave reach up to 60 Wm(exp −2), especially at the surface and in the troposphere, and are larger for an M-dwarf spectrum than a solar spectrum. Differences between the two line-by-line models are significant, although smaller than among the band models. Our results imply that the uncertainty in estimating the insolation threshold of the inner edge (the runaway greenhouse limit) due only to clear-sky radiative transfer is ≈10% of modern Earth’s solar constant (i.e., ≈34 Wm(exp −2) in global mean) among band models and ≈3% between the two line-by-line models. These comparisons show that future work is needed that focuses on improving water vapor absorption coefficients in both shortwave and longwave, as well as on increasing the resolution of stellar spectra in broadband models.

Numerical methods↗

LES Analysis of Loss Anomaly in a Turbine Blade with Large Trailing Edge Radius

There is great interest in the usage of Ceramic Matrix Composites (CMC) as a turbine blade material. CMCs can tolerate higher temperatures than alloyed metallic blades, resulting in better thermal efficiency of gas turbine engines. However, depending on the manufacturing process of the CMC, blades may have a larger trailing edge thickness. The design space therefore needs to be updated due to the resulting flow physics. Recently, experimental results acquired at NASA Glenn Transonic Turbine Blade Cascade Rig showed that a loss measure generally increased with increasing trailing edge thickness. For one case however, the losses initially decreased with increasing Reynolds number but rose and peaked at Re ~1.24x10 6 and then subsequently dropped to the original pre-peak trend. A possible cause of this intriguing phenomenon was speculated to be transonic vortex shedding, which is the mechanism of vortex shedding promoted by reflected shed pressure waves at the trailing edge at relatively high Reynolds numbers and higher Mach numbers. A Reynolds-averaged Navier-Stokes (RANS) analysis or a low-resolution large eddy simulation (LES) does not reproduce this apparent anomaly and thus it is worth performing a wall-resolved LES (the total mesh count of ~290 million cells) to investigate the aerodynamics of the CMC blade in the context of transonic vortex shedding. Our numerical results at Re=1,246,350 show that the pressure waves generated by the vortex shedding in the wake travel upstream and significantly influence the transition and separation on the suction side thus enhancing the said vortex shedding in the wake. This feedback seems not to hold under a low-Re condition (Re=621,900). The Reynolds number dependence was also examined by numerical perturbation of the pressure waves in the wake and by examining how such perturbation attenuates or endures. It is confirmed that the perturbation of the pressure waves is quickly damped.

LES↗

Wall-Modeled Large-Eddy Simulations of a Swept Wing with Leading-Edge Ice

The aerodynamic performance of a swept wing derived from the Common Research Model wing with high-fidelity and smooth leading-edge ice shapes is evaluated using wall-modeled large-eddy simulations. Two mesh paradigms are considered within the Launch, Ascent, and Vehicle Aerodynamics framework: structured hybrid curvilinear body-fitted/immersed-boundary and unstructured Voronoi. The curvilinear approach models the effect of the ice on the flow through penalty terms and the Voronoi strategy includes the ice representation directly in the mesh.Aerodynamic loads, surface pressure profiles, and skin-friction streamlines are compared against experimental results collected at the Wichita State University wind tunnel at a Mach number of 0.18 and a Reynolds number per mean aerodynamic chord of 1.6 million. For the curvilinear simulations with high-fidelity ice, results are sensitive to spanwise mesh resolution near the leading edge, where insufficient spanwise resolution leads to a spanwise running vortexaft of the high-fidelity ice, which is partially removed with increasing spanwise resolution. For the Voronoi simulations with high-fidelity ice, refining the mesh led to good convergence towards the experimental results with the best case demonstrating a maximum discrepancy of three lift counts relative to the experiment across a range of angles of attack from about 5 to 24 degrees, validating the shrink-wrapping procedure used for the ice. For the smooth ice, the curvilinear approach consistently under-predicted the upper surface suction leading to an under-prediction in lift, but did not demonstrate the pronounced over-prediction in upper surface suction near the leading edge observed in the Voronoi simulations.

AATT↗

Engineered Edge Effect Stress Redistribution in Suspended Thin Film Stacks for Flatness Control

This paper presents the systematic study of edge effect stresses and interaction between thin film stacks to achieve flat suspended thin film structures. Finite element modeling (FEM) was used for rapid analysis of support structures on microshutter array (MSA) shutter blades. The design application aims to flatten the blades to provide ultra-high contrast to optical detectors using MSAs as field masks. This is the first comprehensive study of microscopic surface feature edge effect and film-to-film stress interaction in micro electromechanical systems (MEMS). This study demonstrates flattening of thin film stacks by stress redistribution by induced shear force at the edge of strategically designed reinforcement structures.

Thin Film MEMS↗

Study of Trailing Edge Mini Flaps Interactions on a Wind Tunnel Scale Aspect Ratio 13.5 Common Research Model

This paper presents a computation study of an aspect ratio 13.5 wind tunnel scale Common Research Model (CRM) with trailing edge mini-flaps. A vortex-lattice model of the CRM is developed with transonic small disturbance and integral boundary-layer corrections coupled with NASTRAN equivalent beam model for the rapid CRM aeroelastic simulation. The simulations are performed with individual trailing edge mini-flap deflected and a series of groups of two adjacent trailing edge mini-flaps deflected at the same time. A surrogate model is developed to estimate the aerodynamic interactions between the flaps. To validate the surrogate model, static aeroelastic simulations are performed using FUN3D CFD solver.

Interaction↗

Automated Chemical Analysis of Internally Mixed Aerosol Particles Using X-ray Spectromicroscopy at the Carbon K-Edge

We have developed an automated data analysis method for atmospheric particles using scanning transmission X-ray microscopy coupled with near edge X-ray fine structure spectroscopy (STXM/NEXAFS). This method is applied to complex internally mixed submicrometer particles containing organic and inorganic material. Several algorithms were developed to exploit NEXAFS spectral features in the energy range from 278 to 320 eV for quantitative mapping of the spatial distribution of elemental carbon, organic carbon, potassium, and noncarbonaceous elements in particles of mixed composition. This energy range encompasses the carbon K-edge and potassium L2 and L3 edges. STXM/NEXAFS maps of different chemical components were complemented with a subsequent analysis using elemental maps obtained by scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDX). We demonstrate the application of the automated mapping algorithms for data analysis and the statistical classification of particles.

54 ENVIRONMENTAL SCIENCES↗

Gain media edge treatment to suppress amplified spontaneous emission in a high power laser

A novel method and apparatus for suppressing ASE and/or parasitic oscillation modes in a laser is introduced. By roughening one or more peripheral edges of a solid-state crystal or ceramic laser gain media and by bonding such edges to a predetermined electromagnetic absorbing material arranged adjacent to the entire outer surface of the peripheral edges of the roughened laser gain media, ASE, parasitic oscillation modes and/or residual pump energy can be effectively suppressed.

47 OTHER INSTRUMENTATION↗

Spectroscopic, Computational, and Kinetic Studies of the Mu-Sulfide-Bridged Tetranuclear CuZ Cluster in N(2)O Reductase: PH Effect on the Edge Ligand and its Contribution to Reactivity

A combination of spectroscopy and density functional theory (DFT) calculations has been used to evaluate the pH effect at the Cu{sub Z} site in Pseudomonas nautica (Pn) nitrous oxide reductase (N{sub 2}OR) and Achromobacter cycloclastes (Ac) N{sub 2}OR and its relevance to catalysis. Absorption, magnetic circular dichroism, and electron paramagnetic resonance with sulfur K-edge X-ray absorption spectra of the enzymes at high and low pH show minor changes. However, resonance Raman (rR) spectroscopy of PnN{sub 2}OR at high pH shows that the 415 cm{sup -1} Cu-S vibration (observed at low pH) shifts to higher frequency, loses intensity, and obtains a 9 cm{sup -1} {sup 18}O shift, implying significant Cu-O character, demonstrating the presence of a OH{sup -} ligand at the Cu{sub I}Cu{sub IV} edge. From DFT calculations, protonation of either the OH{sup -} to H{sub 2}O or the {mu}{sub 4}-S{sup 2-} to {mu}{sub 4}-SH{sup -} would produce large spectral changes which are not observed. Alternatively, DFT calculations including a lysine residue at an H-bonding distance from the Cu{sub I}Cu{sub IV} edge ligand show that the position of the OH{sup -} ligand depends on the protonation state of the lysine. This would change the coupling of the Cu-(OH) stretch with the Cu-S stretch, as observed in the rR spectrum. Thus, the observed pH effect (pK{sub a} {approx} 9.2) likely reflects protonation equilibrium of the lysine residue, which would both raise E{sup o} and provide a proton for lowering the barrier for the N-O cleavage and for reduction of the [Cu{sub 4}S(im){sub 7}OH]{sup 2+} to the fully reduced 4Cu{sup I} active form for turnover.

59 BASIC BIOLOGICAL SCIENCES↗

Edge Bioinformatics

Edge Bioinformatics is a developmental bioinformatics and data management platform which seeks to supply laboratories with bioinformatics pipelines for analyzing data associated with common samples case goals. Edge Bioinformatics enables sequencing as a solution and forward-deployed situations where human-resources, space, bandwidth, and time are limited. The Edge bioinformatics pipeline was designed based on following USE CASES and specific to illumina sequencing reads. 1. Assay performance adjudication (PCR): Analysis of an existing PCR assay in a genomic context, and automated design of a new assay to resolve conflicting results; 2. Clinical presentation with extreme symptoms: Characterization of a known pathogen or co-infection with a. Novel emerging disease outbreak or b. Environmental surveillance

Lo, Chien-Chi↗

Internal cooling system with converging-diverging exit slots in trailing edge cooling channel for an airfoil in a turbine engine

An airfoil (10) is disclosed for a gas turbine engine in which the airfoil (10) includes an internal cooling system (14) with one or more converging-diverging exit slots (20) configured to increase the effectiveness of the cooling system (14) at the trailing edge (34) of the airfoil (10) by increasing the contact of cooling fluids with internal surfaces (24, 30) of the pressure and suction sides (36, 38) of the airfoil (10). In at least one embodiment, the trailing edge cooling channel (18) may include one or more converging-diverging exit slots (20) to further pressurize the trailing edge cooling channel (18) and may be formed by a first and second ribs (80, 82) extending between an outer walls (13, 12) forming the pressure and suction sides (36, 38). The converging-diverging exit slot (20) may be formed from a first converging section (84) having an inlet (86) with a larger cross-sectional area than an outlet (88) and is formed from a second diverging section (90) having an inlet (92) with a smaller cross-sectional area than an outlet (94).

42 ENGINEERING↗

A Self-Irradiation Correction for the Hybrid K-Edge Densitometer

Hybrid x-ray fluorescence and K-edge densitometry is used at nuclear fuel reprocessing facilities to determine the concentrations of uranium and plutonium in the input accountability vessel. The uranium concentration is determined by K-edge densitometry, that is, from the step-difference in transmission on either side of the K-absorption edge measured using a continuous x-ray spectrum on a vial of the solution defining a well-known geometry. Historically this was done using a basic region of interest analysis but recently to accommodate more challenging solution full spectral analysis has been developed with considerable benefits. In parallel with the transmission measurement, the relative plutonium-to-uranium concentration is obtained from the relative strength of the x-ray–induced K-shell x-ray fluorescence production measured at a backward angle in energy-dispersive mode. However, gamma-ray emissions from fission products present in the solution also cause fluorescence of the characteristic actinide x-rays. Uncorrected, these self-irradiation–induced x-rays can introduce a bias into the reported U:Pu result. The commonly implemented method to correct this interference requires acquisition of a long (~8 hour) passive spectra for the sample. Although effective, it is often impractical to perform a passive measurement on every sample such that a representative passive spectrum is used. We have developed an alternative correction methodology using only the active x-ray fluorescence spectrum that eliminates the requirement for the time-consuming passive count. The active self-interrogation methodology will be discussed and initial performance results presented.

Mcelroy Jr, Robert↗

Softwarized Federations of Science Instruments with Edge-Continuum Containers

Significant expansion of capabilities of DOE science complex of supercomputers, instruments and networks is expected as powerful experimental facilities, exascale computers and terabit networks are added. Combined with the advances in edge and cloud computing technologies, DOE science users now have the promise of unprecedented execution of complex, continuum workflows, namely, small and latency-sensitive computations at the edge and site, massive computations at remote HPC systems, and everything in between on the cloud. But, bringing this capability to the science user requires overcoming the overwhelming complexity of forming the federations of systems, and efficiently and effectively orchestrating the workflows while ensuring high utilization of the expensive facilities. Current manual configuration of the federated systems simply will not scale, since the coordination across sites may take weeks to months, often leading to under-utilized and hard-to-diagnose compositions. A powerful, composable software stack will be developed to (i) wrap the systems so that federations can be composed fast in software, and (ii) containerize computations to be orchestrated across the edge, site, cloud and HPC resources.

Rao, Nageswara S.↗

Shingled solar cells overlapping along non-linear edges

Solar devices and methods for producing solar devices are disclosed. In some examples, a solar device includes solar cells arranged in a shingled manner such that adjacent long edges of adjacent ones of the solar cells overlap. The adjacent long edges have a non-linear shape that has protruding portions. The solar device includes contact pads arranged in the protruding portions of the adjacent long edges such that the contact pads of the adjacent ones of the solar cells are electrically connected.

Caswell, Nathaniel Alexis↗