Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRONICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Formation mechanisms of boron oxide films fabricated by large-area electron beam-induced deposition of trimethyl borate [Formation Mechanisms of Boron Oxide Fillms Fabricated by Large Area Electron Beam-Induced Deposition of Trimethyl Borate]

Boron-containing materials are increasingly drawing interest for the use in electronics, optics, laser targets, neutron absorbers, and high-temperature and chemically resistant ceramics. In this article, the first investigation into the deposition of boron-based material via electron beam-induced deposition (EBID) is reported. Thin films were deposited using a novel, large-area EBID system that is shown to deposit material at rates comparable to conventional techniques such as laser-induced chemical vapor deposition. The deposition rate and stoichiometry of boron oxide fabricated by EBID using trimethyl borate (TMB) as precursor is found to be critically dependent on the substrate temperature. By comparing the deposition mechanisms of TMB to the conventional, alkoxide-based precursor tetraethyl orthosilicate it is revealed that ligand chemistry does not precisely predict the pathways leading to deposition of material via EBID. Lastly, the results demonstrate the first boron-containing material deposited by the EBID process and the potential for EBID as a scalable fabrication technique that could have a transformative effect on the athermal deposition of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Numerical Simulation of Electron Magnetohydrodynamics with Landau-quantized Electrons in Magnetar Crusts

Abstract In magnetar crusts, magnetic fields are sufficiently strong to confine electrons into a small to moderate number of quantized Landau levels. This can have a dramatic effect on the crust's thermodynamic properties, generating field-dependent de Haas–van Alphen oscillations. We previously argued that the large-amplitude oscillations of the magnetic susceptibility could enhance the ohmic dissipation of the magnetic field by continuously generating small-scale, rapidly dissipating field features. This could be important to magnetar field evolution and contribute to their observed higher temperatures. To study this, we performed quasi-3D numerical simulations of electron MHD in a representative volume of neutron star crust matter, for the first time including the magnetization and magnetic susceptibility resulting from Landau quantization. We find that the potential enhancement in the ohmic dissipation rate due to this effect can be a factor ∼3 for temperatures of the order of 10 8 K, and ∼4.5 for temperatures of the order of 5 × 10 7 K, depending on the magnetic field configuration. The nonlinear Hall term is crucial to this amplification: without it, the magnetic field decay is only enhanced by a factor ≲2 even at 5 × 10 7 K. These effects generate a high wavenumber plateau in the magnetic energy spectrum associated with the small-scale de Haas–van Alphen oscillations. Our results suggest that this mechanism could help explain the magnetar heating problem, though due to the effect's temperature-dependence, full magneto-thermal evolution simulations in a realistic stellar model are needed to judge whether it is viable explanation.

Rau, Peter B. (ORCID:0000000152209277)↗
DOE OSTI2013

Electron gun for a multiple beam klystron with magnetic compression of the electron beams

A multi-beam electron gun provides a plurality N of cathode assemblies comprising a cathode, anode, and focus electrode, each cathode assembly having a local cathode axis and also a central cathode point defined by the intersection of the local cathode axis with the emitting surface of the cathode. Each cathode is arranged with its central point positioned in a plane orthogonal to a device central axis, with each cathode central point an equal distance from the device axis and with an included angle of 360/N between each cathode central point. The local axis of each cathode has a cathode divergence angle with respect to the central axis which is set such that the diverging magnetic field from a solenoidal coil is less than 5 degrees with respect to the projection of the local cathode axis onto a cathode reference plane formed by the device axis and the central cathode point, and the local axis of each cathode is also set such that the angle formed between the cathode reference plane and the local cathode axis results in minimum spiraling in the path of the electron beams in a homogenous magnetic field region of the solenoidal field generator.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

Cooled electronic system with liquid-cooled cold plate and thermal spreader coupled to electronic component

Apparatus and method are provided for facilitating cooling of an electronic component. The apparatus includes a liquid-cooled cold plate and a thermal spreader associated with the cold plate. The cold plate includes multiple coolant-carrying channel sections extending within the cold plate, and a thermal conduction surface with a larger surface area than a surface area of the component to be cooled. The thermal spreader includes one or more heat pipes including multiple heat pipe sections. One or more heat pipe sections are partially aligned to a first region of the cold plate, that is, where aligned to the surface to be cooled, and partially aligned to a second region of the cold plate, which is outside the first region. The one or more heat pipes facilitate distribution of heat from the electronic component to coolant-carrying channel sections of the cold plate located in the second region of the cold plate.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Cooled electronic system with liquid-cooled cold plate and thermal spreader coupled to electronic component

Apparatus and method are provided for facilitating cooling of an electronic component. The apparatus includes a liquid-cooled cold plate and a thermal spreader associated with the cold plate. The cold plate includes multiple coolant-carrying channel sections extending within the cold plate, and a thermal conduction surface with a larger surface area than a surface area of the component to be cooled. The thermal spreader includes one or more heat pipes including multiple heat pipe sections. One or more heat pipe sections are partially aligned to a first region of the cold plate, that is, where aligned to the surface to be cooled, and partially aligned to a second region of the cold plate, which is outside the first region. The one or more heat pipes facilitate distribution of heat from the electronic component to coolant-carrying channel sections of the cold plate located in the second region of the cold plate.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

Cooled electronic system with liquid-cooled cold plate and thermal spreader coupled to electronic component

Apparatus and method are provided for facilitating cooling of an electronic component. The apparatus includes a liquid-cooled cold plate and a thermal spreader associated with the cold plate. The cold plate includes multiple coolant-carrying channel sections extending within the cold plate, and a thermal conduction surface with a larger surface area than a surface area of the component to be cooled. The thermal spreader includes one or more heat pipes including multiple heat pipe sections. One or more heat pipe sections are partially aligned to a first region of the cold plate, that is, where aligned to the surface to be cooled, and partially aligned to a second region of the cold plate, which is outside the first region. The one or more heat pipes facilitate distribution of heat from the electronic component to coolant-carrying channel sections of the cold plate located in the second region of the cold plate.

Chainer, Timothy J.↗
DOE OSTI2019

Enhanced neutron detector and electron amplifier structure and a method of fabricating the enhanced neutron detector and electron amplifier structure

An enhanced electron amplifier structure includes a substrate configured to amplify a signal of an incident particle by causing a cascade of secondary electron emissions and an enhancement layer configured to increase a sensitivity of the substrate to the incident particle. The enhancement layer is provided on an upper surface of the substrate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Single-Shot Diagnostics of Microbunched Electrons in Laser-Driven Plasma Accelerators and Free-Electron Lasers

In general, the inherent statistical variances in the laser-driven plasma accelerators (LPAs) and self-amplified spontaneous emission (SASE) free electron lasers (FELs) motivate the use of single-shot diagnostics. In addition, the microbunching phenomenon in each is also variable, so coherent optical transition radiation (COTR) techniques also warrant single-shot evaluations. In both cases, the enhancements of the signals enable optical beam splitters to be used to direct light to the different measuring devices for electron beam size, divergence, spectral content, and/or bunch length as appropriate. COTR Interferometry (COTRI) modelling results for the pre-buncher case at 266 nm and for the LPA case at 633 nm are presented. In addition, examples of few-micron beam size and sub-mrad beam divergence measurements from a single shot of an LPA are reported.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Flexible and stretchable electronic systems for epidermal electronics

Provided herein are skin-mounted biomedical devices and methods of making and using biomedical devices for sensing and actuation applications. For example, flexible and/or stretchable biomedical devices are provided, including electronic devices useful for establishing conformal contact with the skin of a subject. Devices disclosed herein can comprise a plurality of sensing and/or actuating devices provided as part of a skin-mounted flexible or stretchable electronic circuit.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced electron amplifier structure and method of fabricating the enhanced electron amplifier structure

An enhanced electron amplifier structure includes a microporous substrate having a front surface and a rear surface, the microporous substrate including at least one channel extending substantially through the substrate between the front surface and the rear surface, an ion diffusion layer formed on a surface of the channel, the ion diffusion layer comprising a metal oxide, a resistive coating layer formed on the first ion diffusion layer, an emissive coating layer formed on the resistive coating layer, and an optional ion feedback layer formed on the front surface of the structure. The emissive coating produces a secondary electron emission responsive to an interaction with a particle received by the channel. The ion diffusion layer, the resistive coating layer, the emissive coating layer, and the ion feedback layer are independently deposited via chemical vapor deposition or atomic layer deposition.

Mane, Anil U.↗
DOE OSTI2015

Polarized Electron - Polarized Deuteron Deep-Inelastic Scattering in Electron-Ion Collider with Tagging

For the past several years there have been an intensive research and development for the possible electron-ion collider that will be able to probe deep inelastic processes at unprecedentedly high energies in eA channel. One of the important advantages of the collider kinematics in DIS processes is the possibility for an unambiguous separation of hadrons emerging from DIS and hadrons fragmenting from the target nucleus. This creates a unique possibility for tagging the interacting nucleon with the recoil slow fragments in the DIS process. The situation is most clean for the deuteron target in which case the recoil particle is a nucleon. In addition, the possibility of having polarized deuteron beams will create unprecedented opportunities in probing polarization degrees of freedom for parton distributions in the interacting bound nucleon. In this work we develop a theoretical framework for the polarized electron-polarized deuteron deep inelastic scattering in which the recoil nucleon is detected in the target fragmentation region. Two main contributions for which theoretical models are developed are the plane-wave impulse approximation, in which no reinteractions are taking place between the final state products of DIS and the recoil nucleon.

Sargsian, Misak↗
DOE OSTI2011

Large-amplitude electron-acoustic solitons in a dusty plasma with kappa-distributed electrons

The Sagdeev pseudopotential method is used to investigate the occurrence and the dynamics of fully nonlinear electrostatic solitary structures in a plasma containing suprathermal hot electrons, in the presence of massive charged dust particles in the background. The soliton existence domain is delineated, and its parametric dependence on different physical parameters is clarified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2012

Charge breeding results and future prospects with electron cyclotron resonance ion source and electron beam ion source (invited)

The Californium Rare Ion Breeder Upgrade (CARIBU) of the Argonne National Laboratory ATLAS facility will provide low-energy and reaccelerated neutron-rich radioactive beams for the nuclear physics program. A 70 mCi {sup 252}Cf source produces fission fragments which are thermalized and collected by a helium gas catcher into a low-energy particle beam with a charge of 1+ or 2+. An electron cyclotron resonance (ECR) ion source functions as a charge breeder in order to raise the ion charge sufficiently for acceleration in the ATLAS linac. The final CARIBU configuration will utilize a 1 Ci {sup 252}Cf source to produce radioactive beams with intensities up to 10{sup 6} ions/s for use in the ATLAS facility. The ECR charge breeder has been tested with stable beam injection and has achieved charge breeding efficiencies of 3.6% for {sup 23}Na{sup 8+}, 15.6% for {sup 84}Kr{sup 17+}, and 13.7% for {sup 85}Rb{sup 19+} with typical breeding times of 10 ms/charge state. For the first radioactive beams, a charge breeding efficiency of 11.7% has been achieved for {sup 143}Cs{sup 27+} and 14.7% for {sup 143}Ba{sup 27+}. The project has been commissioned with a radioactive beam of {sup 143}Ba{sup 27+} accelerated to 6.1 MeV/u. In order to take advantage of its lower residual contamination, an EBIS charge breeder will replace the ECR charge breeder in the next two years. The advantages and disadvantages of the two techniques are compared taking into account the requirements of the next generation radioactive beam facilities.

43 PARTICLE ACCELERATORS↗
DOE OSTI2012

Study of envelope electron acoustic solitary waves under transverse perturbations having kappa distributed hot electrons

As is well known, the envelope electron acoustic (EA) nonlinear waves are expressed by nonlinear Schroedinger equation. In this paper, we find that under transverse perturbations, this kind of nonlinear waves can be described by Davey-Stewartson equation. In this work, modulational properties of EA wave and its stability regions in two-dimensional plasma have been studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Numerical investigation of electron self-injection in the nonlinear bubble regime

The process of electron self-injection in the nonlinear bubble wake generated by a short and intense laser pulse propagating in a uniform underdense plasma is studied by means of fully self-consistent particle-in-cell simulations and test-particle simulations. We consider a wake generated by a non-evolving laser driver traveling with a prescribed velocity, which then sets the structure and the velocity of the wake, so the injection dynamics is decoupled from driver evolution, but a realistic structure for the wakefield is retained. We show that a threshold for self-injection into a non-evolving bubble wake exists, and we characterize the dependence of the self-injection threshold on laser intensity, wake velocity, and plasma temperature for a range of parameters of interest for current and future laser-plasma accelerators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Scattering due to Schottky barrier height spatial fluctuation on two dimensional electron gas in AlGaN/GaN high electron mobility transistors

A scattering mechanism related to the Schottky barrier height (SBH) spatial fluctuation of the two dimensional electron gas (2DEG) in AlGaN/GaN heterostructures is presented. We find that the low field mobility is on the order of 10{sup 4}–10{sup 6} cm{sup 2}/Vs. The 2DEG transport properties are found to be influenced by both the mobility and 2DEG density variations caused by the SBH fluctuation. Our results indicate that a uniform Schottky contact is highly desired to minimize the influence of SBH inhomogeneity on the device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Multiple species beam production on laser ion source for electron beam ion source in Brookhaven National Laboratory

Extracted ion beams from the test laser ion source (LIS) were transported through a test beam transport line which is almost identical to the actual primary beam transport in the current electron beam ion source apparatus. The tested species were C, Al, Si, Cr, Fe, Cu, Ag, Ta, and Au. The all measured beam currents fulfilled the requirements. However, in the case of light mass ions, the recorded emittance shapes have larger aberrations and the RMS values are higher than 0.06 π mm mrad, which is the design goal. Since we have margin to enhance the beam current, if we then allow some beam losses at the injection point, the number of the single charged ions within the acceptance can be supplied. For heaver ions like Ag, Ta, and Au, the LIS showed very good performance.

43 PARTICLE ACCELERATORS↗