Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Copper oxy-sulfide and copper sulfate thin films as transparent p-type conductive electrodes

Highlights: • Cu{sub 2}O, CuS and CuSO{sub 4} films are prepared and compared as p-type transparent electrodes. • CuSO{sub 4} gives the highest visible transmittance and CuS the lowest sheet resistance. • Cu{sub 2}O sulfurization produces CuS with a rougher surface and higher resistance. • CuS oxidation gives a Cu{sub 2}S and Cu{sub 2}O mixture with the best electrode performance. - Abstract: Starting from evaporated Cu layers, oxidation and sulfurization processes were developed by reaction at 250 °C with O{sub 2} or elemental sulfur to obtain Cu{sub 2}O and CuS thin films, respectively, with p-type conductivity and visible transparency. With the aim of achieving mixed compounds that combine the best properties of oxides (transparency) and sulfides (metal-like conductivity), different methods were tested, including Cu{sub 2}O sulfurization, CuS oxidation and direct Cu sulfoxidation. The crystalline structure, morphology and optical and electrical characteristics of the various samples were studied comparatively. CuSO{sub 4} crystals with a mean size above 40 nm were obtained by sulfoxidation, showing higher transmittance and lower resistance than the Cu{sub 2}O film shaped by crystallites of ∼13 nm. Moreover, a superior electrode quality was achieved after CuS oxidation, which produces a mixture of small Cu{sub 2}O and larger Cu{sub 2}S nanocrystals with visible transmittance as high as the pure oxide and a hole density close to the sulfide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NiCo2S4 nanotube arrays grown on flexible carbon fibers as battery-type electrodes for asymmetric supercapacitors

Highlights: • NiCo{sub 2}S{sub 4} nanotube arrays grew on carbon cloth through a facile two-step hydrothermal process. • The prepared NiCo{sub 2}S{sub 4} nanotube arrays were used as the supercapacitor electrode. • The asymmetric supercapacitor based NiCo{sub 2}S{sub 4} nanotube arrays possesses a superior energy density and power density. - Abstract: NiCo{sub 2}S{sub 4} nanotube arrays grown on carbon cloth are prepared successfully by a facile two-step method. The as-prepared tubular nanoarchitecture deliver a high specific capacity of 578 C/g at a galvanostatic charge-discharge current density of 0.5 A/g with good cycling stability in 3 M KOH aqueous solution. Furthermore, the all-solid-state asymmetric supercapacitor based NiCo{sub 2}S{sub 4} nanotube arrays as the positive electrode shows a superior energy density of 24.78 Wh/kg at a power density of 1770.13 W/kg. The results reveal that the as-synthesized NiCo{sub 2}S{sub 4} nanotube arrays might be promising electrode materials for electrochemical energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rate mechanism of vanadium oxide coated tin dioxide nanowire electrode for lithium ion battery

Correlating composition and structures with battery performance is key aspect of electrode material design and improvement. Here utilizing in situ open cell transmission electron microscopy, we studied the in situ cycling rate performance of vanadium oxide coated tin dioxide nanowire electrode by tuning the lithiation/delithiation current. In situ results show that the good rate performance of such high capacity compositional material lies in the layered vanadium oxide coating strategy. For cycling at high rate, the layered vanadium oxide also serves as fast ions and electrons transportation route while tin nanoparticles aggregate to the surface with sizes controlled by the coating layer, cycle induced volume change is released to the surface and excellent mechanical tolerance of tin nanoparticle and inner nanowire ensure improved cyclability of the electrode.

25 ENERGY STORAGE↗

Modeling of surface-state induced inter-electrode isolation of n -on- p devices in mixed-field and γ -irradiation environments

Position sensitive n-on-p silicon sensors will be utilized in the tracker and in the High Granularity Calorimeter (HGCAL) of the Compact Muon Solenoid (CMS) experiment at High Luminosity Large Hadron Collider (HL-LHC). The detrimental effect of the radiation-induced accumulation of positive net oxide charge on position resolution in n-on-p sensors has typically been countered by the application of isolation implants like p-stop or p-spray between n + -electrodes. In addition to the positively charged layer inside the oxide and close to the Si/SiO 2 -interface, surface damage introduced by ionizing radiation in SiO 2 -passivated silicon particle detectors includes the accumulation of trapped-oxide-charge and interface traps. A previous study of either n/γ (mixed field)- or γ-irradiated Metal-Oxide-Semiconductor (MOS) capacitors showed evidence of substantially higher introduction rates of acceptor- and donor-type deep interface traps (N it,acc/don ) in mixed-field environment. Here, in this work, an inter-pad and -strip resistance (or resistivity (ρ int )) simulation study of n-on-p sensors with and without p-stop isolation implants was conducted for both irradiation types. Higher levels of ρint showed correlation to higher densities of deep N it,acc/don , with the inter-pad isolation performance of the mixed-field irradiated sensors becoming independent of the presence of p-stop implant between the n + - electrodes up to about 100 kGy. The low introduction rates of deep N it,acc/don in γ-irradiated sensors resulted in high sensitivity of ρ int to the presence and peak doping of p-stop above the lowest dose of about 7 kGy in the study. As a consequence of the advantageous influence of radiation-induced accumulation of deep N it on the inter-electrode isolation, position sensitive n-on-p sensors without isolation implants may be considered for future HEP-experiments where the radiation is largely due to hadrons.

Akchurin, N. [Texas Tech Univ., Lubbock, TX (Unite↗

Equilibria model for pH variations and ion adsorption in capacitive deionization electrodes

Ion adsorption and equilibrium between electrolyte and microstructure of porous electrodes are at the heart of capacitive deionization (CDI) research. Surface functional groups are among the factors which fundamentally affect adsorption characteristics of the material and hence CDI system performance in general. Current CDI-based models for surface charge are mainly based on a fixed (constant) charge density, and do not treat acid-base equilibria of electrode microstructure including so-called micropores. Here, we expand current models by coupling the modified Donnan (mD) model with weak electrolyte acid-base equilibria theory. In our model, surface charge density can vary based on equilibrium constants (pK's) of individual surface groups as well as micropore and electrolyte pH environments. In this initial paper, we consider this equilibrium in the absence of Faradaic reactions. The model shows the preferential adsorption of cations versus anions to surfaces with respectively acidic or basic surface functional groups. We introduce a new parameter we term “chemical charge efficiency” to quantify efficiency of salt removal due to surface functional groups. We validate our model using well controlled titration experiments for an activated carbon cloth (ACC), and quantify initial and final pH of solution after adding the ACC sample. We also leverage inductively coupled plasma mass spectrometry (ICP-MS) and ion chromatography (IC) to quantify the final background concentrations of individual ionic species. Our results show a very good agreement between experiments and model. The model is extendable to a wide variety of porous electrode systems and CDI systems with applied potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous neutron and X-ray tomography for visualization of graphite electrode degradation in fast-charged lithium-ion batteries

Advanced battery characterization using neutron and X-ray-based imaging modalities is crucial to reveal fundamental degradation modes of lithium-ion batteries (LIBs). Taking advantage of the sensitivity of neutrons to some low-Z (Li) and X-rays to high-Z materials (Cu), here we demonstrate the viability of simultaneous neutron and X-ray tomography (NeXT) as a non-destructive imaging platform for ex-situ 3D visualization of graphite electrode degradation following extreme fast charging (XFC). In addition, we underscore the benefits of the simultaneous of NeXT by combining the neutron and X-ray tomography data from the same sample location for material identification and segmentation of one pristine and two XFC-cycled graphite electrodes (9C charge for 450 cycles). Our ex-situ results and methodology development pave the way for the design of NeXT-friendly LIB geometries that will allow operando and/or in-situ 3D visualization of electrode degradation during XFC.

25 ENERGY STORAGE↗

Controlling Ion Coordination Structure and Diffusion Kinetics for Optimized Electrode-Electrolyte Interphases and High Performance Si Anodes

The cycling performance of batteries is largely determined by electrode-electrolyte interphase associated with the chemical and electrochemical properties of electrolyte salts and solvents. In this work, we used a localized high concentration electrolyte (LHCE) that enables high performance of Si anodes as a model system and investigated the scientific mechanism behind the optimization of electrolyte. The correlation between electrode (cathode/anode)-electrolyte interphase and ion coordination structure and diffusion kinetics were elucidated systematically. Among all the LHCEs tested, the one with 1.8M LiFSI concentration and 1:2 molar ratio of carbonate solvents and fluorinated diluents has the highest proportion of solvent-separated ion pairs and contact ion pairs and fastest ion diffusion. It enables the most stable electrode-electrolyte interphase and hence the best Si anode performance. These results reveal the fundamental mechanism behind the stability of LHCEs and provide guidance on the new electrolyte design for Si anodes and other battery systems.

Jia, Haiping↗

The Effect of Fluoroethylene Carbonate as an Additive on the Solid Electrolyte Interphase on Silicon Lithium-Ion Electrodes

Fluoroethylene carbonate (FEC) has become a standard electrolyte additive for use with silicon negative electrodes, but how FEC affects solid electrolyte interphase (SEI) formation on the silicon anode’s surface is still not well understood. Herein, SEI formed from LiPF6-based carbonate electrolytes, with and without FEC, were investigated on 50 nm thick amorphous silicon thin film electrodes to understand the role of FEC on silicon electrode surface reactions. In contrast to previous work, anhydrous and anoxic techniques were used to prevent air and moisture contamination of prepared SEI films. This allowed for accurate characterization of the SEI structure and composition by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry depth profiling. These results show that FEC reduction leads to fluoride ion and LiF formation, consistent with previous computational and experimental results. Surprisingly, we also find that these species decrease lithium-ion solubility and increase the reactivity of the silicon surface. We conclude that the effectiveness of FEC at improving the Coulombic efficiency and capacity retention is due to fluoride ion formation from reduction of the electrolyte, which leads to the chemical attack of any silicon-oxide surface passivation layers and the formation of a kinetically stable SEI comprising predominately lithium fluoride and lithium oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification and Mitigation of Generated Solid By-Products during Advanced Electrode Materials Processing

A scalable, solid-state elevated temperature process was developed to produce high capacity carbonaceous electrode materials for energy storage devices via decomposition of starch-based precursor in an inert atmosphere. The fabricated carbon-based architectures are useful as an excellent electrode material for lithium-ion, sodium-ion and lithium-sulfur batteries. This article focuses on the study and analysis of the formed nanometer-sized byproducts during the lab-scale production of carbonaceous electrode materials in the process design phase. The complete material production process was studied by operation, namely during heating, holding the reaction at elevated temperature, followed by cooling. The unknown downstream particles in the process exhaust were collected and characterized via aerosol and liquid suspensions, and they were quantified using direct-reading instruments for number and mass concentrations. The airborne emissions were collected on polycarbonate filters and TEM grids using the Tsai diffusion sampler (TDS) for characterization and further analysis. Released byproduct aerosols collected in a deionized (DI) water trap were analyzed using a Nanosight real time nanoparticle characterization system and the aerosols emitted post water suspension were collected and characterized. Individual particles in the nanometer size range were found in exhaust aerosols, however, crystal structured aggregates were formed on the sampling substrate after a long-term sampling of emitted exhaust. After characterizing the released aerosol byproducts, methods were also identified to mitigate possible human and environmental exposures upon the industrial implementation of such a process.

25 ENERGY STORAGE↗

Improvement of Electrochemical Properties of Lithium–Oxygen Batteries Using a Silver Electrode

Silver (Ag) electrodes are prepared by an electrodeposition method at -0.25 V versus SCE. To evaluate the effect of particle size on Li–air cells, deposition times are 3, 10, 30, and 300 s. When cycled at a current density of 0.032 mA cm–2, the Ag-deposited electrode for 300 s shows very low polarization corresponding to the oxygen evolution reaction potential at 3.6 V. X-ray diffraction studies confirm that the main discharge product is Li2O2, and the results of scanning electron microscopy and transmission electron microscopy of the discharged electrodes show lithium peroxides at different positions due to the limitation of active sites on silver particles.

25 ENERGY STORAGE↗

The Chemistry of Electrolyte Reduction on Silicon Electrodes Revealed by in Situ ATR-FTIR Spectroscopy

While silicon is the most promising next-generation anode material for lithium-ion batteries (LIBs), silicon electrodes exhibit significant capacity fade with cycling. A common hypothesis is that the capacity loss is due to the solid electrolyte interphase (SEI) forming in the first cycle and becoming destabilized by large cyclic volume changes. A cell for in situ attenuated total reflection-Fourier transform infrared spectroscopy with controllable penetration depth was used to study the chemistry at the electrode–electrolyte interface. The SEI product precursors at the interface were successfully identified and differentiated from free or solvated solvent molecules in the bulk electrolyte. Intriguingly, for the most common electrolyte consisting of ethylene carbonate and diethyl carbonate, ethylene carbonate was found to directly reduce to lithium ethylene dicarbonate on the lithiated silicon surface and diethyl carbonate to selectively reduce to diethyl 2,5-dioxahexane dicarboxylate on the surface of the native silicon-oxide film. In conclusion, understanding this surface dependence of the SEI composition is critical to tuning the silicon electrode surface condition and, ultimately, enhancing the performance of future LIBs.

25 ENERGY STORAGE↗

Insights into the Interconnection of the Electrodes and Electrolyte Species in Lithium–Sulfur Batteries Using Spatially Resolved Operando X-ray Absorption Spectroscopy and X-ray Fluorescence Mapping

The lithium–sulfur (Li–S) battery chemistry has attracted great interest in the last decade because of its outstanding theoretical gravimetric energy density compared to the state-of-the-art lithium-ion battery technology. However, practically achieved energy density is still far below the theoretical value, even in small laboratory-scale batteries. The problems seen in laboratory-scale batteries will inevitably increase during scale-up to large application-format cells, as the electrolyte to active material (AM) ratio will need to be reduced in these cells to achieve high gravimetric energy density on cell-level basis. Our paper shows the unique possibility of X-ray fluorescence (XRF) mapping to visualize the spatial distribution of the AM inside operating Li–S batteries in all cell components [working electrode (WE), separator, and counter electrode (CE)]. Through a combination of operando XRF mapping and X-ray absorption spectroscopy, we show that unless self-discharge is efficiently prevented, the AM can completely dissolve and distribute throughout the cell stack within a time frame of 2 h, causing poor capacity retention. Finally, using a polysulfide diffusion barrier between the WE and the CE, we successfully suppress these processes and thereby establish a tool for examining the sealed cathode electrode compartment, enabling sophisticated studies for future optimization of the WE processes.

25 ENERGY STORAGE↗

Early Stage Anodic Instability of Glassy Carbon Electrodes in Propylene Carbonate Solvent Containing Lithium Hexafluorophosphate

In this paper, irreversible changes to the morphology of glassy carbon (GC) electrodes at potentials between 3.5 and 4.5 V vs Li/Li + in propylene carbonate (PC) solvent containing lithium hexafluorophosphate (LiPF 6 ) are reported. Analysis of cyclic voltammetry (CV) experiments in the range of 3.0 to 6.0 V shows that the capacitance of the electrochemical double -layer increased irreversibly beginning at potentials as low as 3.5 V. These changes resulted from nonfaradaic interactions, and were not due to oxidative electrochemical decomposition of the electrode and electrolyte, anion intercalation, nor caused by the presence of water, a common impurity in organic electrolyte solutions. Atomic force microscopy (AFM) images revealed that increasing the potential of a bare GC surface from 3.0 to 4.5 V resulted in a 6X increase in roughness, in good agreement with the changes in double -layer capacitance. Treating the GC surface via exposure to trichloromethylsilane vapors resulted in a stable double -layer capacitance between 3.0 and 4.5 V, and this treatment also correlated with less roughening. Lastly, these results inform future efforts aimed at controlling surface composition and morphology of carbon electrodes.

36 MATERIALS SCIENCE↗

Biomimetic Ant-Nest Electrode Structures for High Sulfur Ratio Lithium–Sulfur Batteries

The lithium–sulfur (Li–S) rechargeable battery has the benefit of high gravimetric energy density and low cost. Significant research currently focuses on increasing the sulfur loading and sulfur/inactive-materials ratio, to improve life and capacity. Inspired by nature’s ant-nest structure, this study results in a novel Li–S electrode that is designed to meet both goals. With only three simple manufacturing-friendly steps, which include slurry ball-milling, doctor-blade-based laminate casting, and the use of the sacrificial method with water to dissolve away table salt, the ant-nest design has been successfully recreated in an Li–S electrode. The efficient capabilities of the ant-nest structure are adopted to facilitate fast ion transportation, sustain polysulfide dissolution, and assist efficient precipitation. Finally, high cycling stability in the Li–S batteries, for practical applications, has been achieved with up to 3 mg·cm –2 sulfur loading. Li–S electrodes with up to a 85% sulfur ratio have also been achieved for the efficient design of this novel ant-nest structure.

25 ENERGY STORAGE↗

Fabrication of Nickel Oxide Nanopillar Arrays on Flexible Electrodes for Highly Efficient Perovskite Solar Cells

Semiconductor nanomaterials with controlled morphologies and architectures are of critical importance for high-performance optoelectronic devices. However, the fabrication of such nanomaterials on polymer-based flexible electrodes is particularly challenging due to degradation of the flexible electrodes at a high temperature. In this paper, we report the fabrication of nickel oxide nanopillar arrays (NiO x NaPAs) on a flexible electrode by vapor deposition, which enables highly efficient perovskite solar cells (PSCs). The NiO x NaPAs exhibit an enhanced light transmittance for light harvesting, prohibit exciton recombination, promote irradiation-generated hole transport and collection, and facilitate the formation of large perovskite grains. These advantageous features result in a high efficiency of 20% and 17% for the rigid and flexible PSCs, respectively. Additionally, the NaPAs show no cracking after 500 times of bending, consistent with the mechanic simulation results. Lastly, this robust fabrication opens a new opportunity for the fabrication of a large area of high-performance flexible optoelectronic devices.

14 SOLAR ENERGY↗

Long-Term Structural and Chemical Stability of Carbon Electrodes in Vanadium Redox Flow Battery

Predicting the performance decay in carbon electrodes is critical to maximizing the longevity of redox flow battery (RFB) systems. This study investigates the effect of long-term cycling (over 8000 cycles) on the structural and chemical evolution of carbon electrodes. We find that the microstructural aspects such as graphitic stacking order and interlayer spacing along with overall morphological construct remains largely unchanged even after the prolonged cycling process. Conversely, significant changes in surface chemistry such as evolution of functional groups and point defects are evident from our combined multimodal spectroscopic and computational analysis. The XPS and FTIR analysis reveals chemical absorption of chloride counter anions at point defects within graphitic surface. Additionally, our results suggest that vanadium cation plays an important role in counter anion-carbon surface interaction and subsequently the surface chemistry evolutions. Our findings provide insights about surface chemical evolution that is critical for predicting electrode performance and longevity of RFB.

Modachur Sivakumar, Bhuvaneswari↗

High-Mass Loading of Flower-like Ni-MoS 2 microspheres Toward Efficient Intercalation pseudocapacitive Electrode

This work reports the exploration of intercalation pseudocapacitance in a thicker electrode of flowerlike Ni-doped MoS 2 microspheres that features a mass loading of ~10 mg/cm 2 without sacrificing the gravimetric capacitance (~425 F/g at 5 mV/s). Integration of Ni atoms into MoS 2 microspheres not only stabilized the structural integrity but also ameliorated the rapid intercalation and deintercalation of electrolyte ions even at a commercial-level mass loading. The energy instability by Ni doping significantly changed the local bonding behavior and the overall electronic structure of MoS 2 , facilitating the breaking of the MoS 2 layer and generation of more active edge sites, which are responsible for faster reaction kinetics. The experiments attribute the overall capacitance enhancement in (Mo-Ni)S 2 to the increased rate of electrolyte ion insertion and extraction, which is confirmed by b-values close to 0.5, at different potentials, indicating that the current response predominantly depends on the diffusive mechanism for both MoS 2 and Ni-MoS 2 thicker electrodes. The symmetric device constructed with Ni-MoS 2 microspheres exhibited a capacitance value of 101 F/g in 1 mV/s, for which the energy density is 9 Wh/kg, as well as attained an outstanding cycling stability of 10000 cycles with 60% retention at 2 A/g. In addition to providing insights into the development of 2D TMDs, this work explores the design of robust and highly efficient intercalation electrode material for electrochemical energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extended Cycling through Rigid Block Copolymer Electrolytes Enabled by Reducing Impurities in Lithium Metal Electrodes

Successful prevention of lithium dendrite growth would enable the use of lithium metal as an anode material in next-generation rechargeable batteries. Mechanically stiff block copolymer electrolytes have been shown to prolong the life of lithium metal cells by partially suppressing lithium dendrite growth. Yet, impurity particles that are invariably present in the lithium metal nucleate electrodeposition defects that eventually lead to short circuits. Here, we use X-ray tomography to study the morphology of electrodeposited lithium in symmetric cells containing a block copolymer electrolyte. An "electrochemical filtering" treatment was performed on these cells to reduce the concentration of impurity particles near the electrode-electrolyte interface, and cells were cycled to determine the effects of the treatment on lifetime. Depending on the treatment details, the average charge passed before failure was improved by 30-400%. For a cell in which the treatment was most effective, the cycle life was increased by more than an order of magnitude, and the measured number of deposition defects per area was negligible. Other treated cells, however, in which the treated lithium was imperfect, had a higher number of deposition defects per area compared to control cells. A majority of the deposition defects in treated cells were confined within the electrodes. In contrast, most of the deposition defects seen in the control cells were protrusions that invaded the electrolyte phase. The increased lifetime in these imperfectly treated cells was not due to a reduction in the number of deposition defects per area, but rather due to the differences in defect morphology. These findings motivate the development of deposition defect- and impurity-free lithium metal electrodes.

25 ENERGY STORAGE↗