Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Tunneling Current in Oppositely Connected Schottky Diodes Formed by Contacts between Degenerate n-GaN and a Metal

The nonlinear behavior of the I–V characteristics of symmetric contacts between a metal and degenerate n-GaN, which form oppositely connected Schottky diodes, is investigated at free-carrier densities from 1.5 × 10{sup 19} to 2.0 × 10{sup 20} cm{sup –3} in GaN. It is demonstrated that, at an electron density of 2.0 × 10{sup 20} cm{sup –3}, the conductivity between metal (chromium) and GaN is implemented via electron tunneling and the resistivity of the Cr–GaN contact is 0.05 Ω mm. A method for determining the parameters of potential barriers from the I–V characteristics of symmetric opposite contacts is developed. The effect of pronounced nonuniformity of the current density and voltage distributions over the contact area at low contact resistivity is taken into account. The potential-barrier height for Cr–n{sup +}-GaN contacts is found to be 0.47 ± 0.04 eV.

36 MATERIALS SCIENCE↗

Application of the Locally Nonequilibrium Diffusion-Drift Cattaneo–Vernotte Model to the Calculation of Photocurrent Relaxation in Diode Structures under Subpicosecond Pulses of Ionizing Radiation

The excitation-relaxation process in electron–hole plasma upon exposure to ionizing radiation for a time shorter than the relaxation time of the mobile carrier energy and momentum is considered. By the example of the calculation of transient ionization processes in a silicon hyperhigh-frequency Schottky diode, local-equilibrium and local-nonequilibrium carrier transport models are compared. It is shown that the local-nonequilibrium model features a wider field of application for describing fast relaxation processes.

61 RADIATION PROTECTION AND DOSIMETRY↗

Current Noise and Efficiency Droop of Light-Emitting Diodes in Defect-Assisted Carrier Tunneling from an InGaN/GaN Quantum Well

The current dependences of the spectral noise density and quantum efficiency in green and blue light-emitting diodes with InGaN/GaN quantum wells (QWs) are measured. It is shown that the noise level greatly increases at high currents at which there is a quantum efficiency droop. The mechanism by which the current noise is formed is associated with hopping transport via the deep states of color centers in GaN across the n barrier of an InGaN/GaN QW. The source of the noise is the hopping resistance of the space-charge region, which limits the current of thermally activated electrons into the QW. The efficiency droop and the increase in noise level are attributed to a change in the electric-field direction near the QW at high injection levels and to an increase in the tunneling leakage of holes from the QW. It is shown that the experimental frequency-related noise spectra having the shape of a Lorentzian spectrum at the working currents are related to the frequency of hopping between deep centers near the InGaN/GaN QW and to Maxwell relaxation in the space-charge region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of High-Energy Electron Irradiation on Surge Currents in 4H-SiC JBS Schottky Diodes

The effect of irradiation with high-energy (0.9 MeV) electrons on surge currents in high-voltage (operating voltage 1700 V) 4H -SiC Schottky p-n diodes is studied in the microsecond range of the forward-current pulse duration. With increasing irradiation dose Φ, the hole injection threshold steadily grows, and the base-modulation level by minority carriers (holes) becomes lower. At Φ = 1.5 × 10{sup 16} cm{sup –2}, no hole injection is observed up to forward voltages of ~30 V and forward current densities of j ≈ 9000 A/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Methods for spin injection managing in InGaAs/GaAs/Al{sub 2}O{sub 3}/CoPt spin light-emitting diodes

Spin injection in CoPt/Al{sub 2}O{sub 3}/(Al)GaAs spin light-emitting diodes (SLEDs) was studied. The oscillations of the degree of circular polarization upon variation of a distance between the active region of the SLED and a CoPt ferromagnetic injector were observed. The oscillations depend neither on a SLED material (GaAs or AlGaAs), nor on the type of injected spin-polarized carriers (electrons and holes) and are related to the action of a perpendicular magnetic field on the injected spin-polarized carriers that causes their precession. During the transfer to the active region through a distance of 50–100 nm from the injector, a z–component of a spin changes a phase that is detected experimentally as the change in sign of the degree of circular polarization of luminescence. Conceivably, a source of the internal magnetic field leading to spin precession is the magnetic field of the nonuniformly magnetized CoPt contact.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raising the Operating Temperature of (Ga,Mn)As/GaAs Spin Light Emitting Diodes by Applying Post-Growth Treatment

Abstract—Spin light emitting diodes (spin-LEDs) containing (Ga,Mn)As ferromagnetic layers are fabricated based on InGaAs/GaAs heterostructures and studied. We achieve increases in the operating temperatures of our spin-LEDs by subjecting the surface of the structures, prior to depositing an ohmic metal contact, to pulsed laser annealing. The fabricated devices produce circularly polarized electroluminescence when placed in an external magnetic field. The temperatures at which circularly polarized electroluminescence is still observed is raised from 30 K for unprocessed structure to 110 K for laser-annealed structures. The observed effect is linked to an increase in the Curie temperature of the (Ga,Mn)As layer as a result of laser impact.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Air Pressure on Parameters of Beam Current and X-Ray Radiation Generated in a Gas Diode

Parameters of a beam of runaway electrons and X-ray radiation generated in a gas diode at different atmospheric pressures are studied. It is shown that the maximum beam currents and intensities of X-ray radiation are generated at an air pressure of about 10{sup 2} Pa. Distribution of beam electrons with respect to energy is determined by the method of attenuation of beam current using aluminum filters with different thicknesses. The maximum of such a distribution corresponds to an electron energy of about 100 keV. The maximum exposure dose of X-ray radiation behind a copper-foil anode with a thickness of 30 μm is about 107 mR. It is shown that the beam electrons absorbed by elements of an X-ray detector affect the shape and amplitude of the desired signal at beam currents of greater than 35 A/cm{sup 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stable and Unstable Regimes of Plasma Diodes in the Presence of Electron Collisions

A thermionic energy converter as the Pierce diode of which the interelectrode space is filled with a uniform background of immobile ions is considered. The features of stability of its time-independent solutions are investigated under electron collisions with background gas. The solutions are obtained analytically by the Lagrange method. A dispersion equation is derived using a perturbative approach. The aperiodic solutions of this equation, as well as the oscillatory ones, are obtained and their properties are studied too. The regions of unstable aperiodic modes are determined. It is shown that all the oscillatory modes are stable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Current–Voltage Characteristics of the Initial Stage of Arc Discharge in a High-Voltage Vacuum Diode

The process of electron instability development and propagation of a cathode electron beam and anomalous ion beam, followed by outburst of current in the initial stage of arc discharge was observed in rarefied plasma cloud of high-voltage vacuum diode. These events are consistent with the model of anomalous ion acceleration in interelectrode plasma at the spark stage of vacuum arc discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diode Structures Based on (In, Fe)Sb/GaAs Magnetic Heterojunctions

The current–voltage characteristics of light-emitting diodes based on InGaAs/GaAs heterostructures with an injector made of (In, Fe)Sb diluted magnetic semiconductor are studied. The current–voltage characteristics of the (In, Fe)Sb/n-GaAs and (In, Fe)Sb/p-GaAs structures are analyzed. The band diagrams of heterojunctions are constructed. It is shown that the investigated structures have the same current transfer mechanism as in the structures with a Schottky barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A light-emitting diode- (LED-) based absorption sensor for simultaneous detection of carbon monoxide and carbon dioxide

Here, a sensor was developed for simultaneous measurements of carbon monoxide (CO) and carbon dioxide (CO 2 ) fluctuations in internal combustion engine exhaust gases. This sensor utilizes low-cost and compact light-emitting diodes (LEDs) that emit in the 3–5 µm wavelength range. An affordable, fast response sensor that can measure these gases has a broad application that can lead to more efficient, fuel-flexible engines and regulation of harmful emissions. Light emission from LEDs is spectrally broader and more spatially divergent when compared to that of lasers, which presented many design challenges. Optical design studies addressed some of the non-ideal characteristics of the LED emissions. Measurements of CO and CO 2 were conducted using their fundamental absorption bands centered at 4.7 µm and 4.3 µm, respectively, while a 3.6 µm reference LED was used to account for scattering losses (due to soot, window deposits, etc.) common to the three measurement LEDs. Instrument validation and calibration was performed using a laboratory flow cell and bottled-gas mixtures. The sensor was able to detect CO 2 and CO concentration changes as small as 30 ppm and 400 ppm, respectively. Because of the many control and monitor species with infra-red absorption features, which can be measured using the strategy described, this work demonstrates proof of concept for a wider range of fast (250 Hz) and low-cost sensors for gas measurement and process monitoring.

47 OTHER INSTRUMENTATION↗

Differential spectral responsivity measurement of photovoltaic detectors with a light-emitting-diode-based integrating sphere source

We present an experimental realization of differential spectral responsivity measurement by using a light-emitting diode (LED)-based integrating sphere source. The spectral irradiance responsivity is measured by a Lambertian-like radiation field with a diameter of 40mm at the peak wavelengths of the 35 selectable LEDs covering a range from 280 to 1550nm. The systematic errors and uncertainties due to lock-in detection, spatial irradiance distribution, and reflection from the test detector are experimentally corrected or considered. In addition, we implemented a numerical procedure to correct the error due to the broad spectral bandwidth of the LEDs. The overall uncertainty of the DSR measurement is evaluated to be 2.2% (k=2) for Si detectors. To demonstrate its application, we present the measurement results of two Si photovoltaic detectors at different bias irradiance levels up to 120mW/cm{sup 2}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Coherent addition of high power laser diode array with a V-shape external Talbot cavity

Here, we designed a V-shape external Talbot cavity for a broad-area laser diode array and achieved coherent laser beam addition without using a spatial filter. The V-shape external Talbot cavity provides good mode-discrimination and high-power running capability. Coherent laser beam addition of up to 9-W output power at a narrow spectral linewidth (~0.1 nm) is demonstrated. A multi-lobe far-field profile generated by a low filling-factor phase-locked array is confirmed by our numerical simulation.

42 ENGINEERING↗

Soft holographic interference lithography microlens for enhanced organic light emitting diode light extraction

Very uniform 2 {micro}m-pitch square microlens arrays ({micro}LAs), embossed on the blank glass side of an indium-tin-oxide (ITO)-coated 1.1 mm-thick glass, are used to enhance light extraction from organic light-emitting diodes (OLEDs) by {approx}100%, significantly higher than enhancements reported previously. The array design and size relative to the OLED pixel size appear to be responsible for this enhancement. The arrays are fabricated by very economical soft lithography imprinting of a polydimethylsiloxane (PDMS) mold (itself obtained from a Ni master stamp that is generated from holographic interference lithography of a photoresist) on a UV-curable polyurethane drop placed on the glass. Green and blue OLEDs are then fabricated on the ITO to complete the device. When the {mu}LA is {approx}15 x 15 mm{sup 2}, i.e., much larger than the {approx}3 x 3 mm{sup 2} OLED pixel, the electroluminescence (EL) in the forward direction is enhanced by {approx}100%. Similarly, a 19 x 25 mm{sup 2} {mu}LA enhances the EL extracted from a 3 x 3 array of 2 x 2 mm{sup 2} OLED pixels by 96%. Simulations that include the effects of absorption in the organic and ITO layers are in accordance with the experimental results and indicate that a thinner 0.7 mm thick glass would yield a {approx}140% enhancement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diode-based additive manufacturing of metals using an optically-addressable light valve

We present that Selective Laser Melting (SLM) of metal powder bed layers, whereby 3D metal objects can be printed from a digital file with unprecedented design flexibility, is spurring manufacturing innovations in medical, automotive, aerospace and textile industries. Because SLM is based on raster-scanning a laser beam over each layer, the process is relatively slow compared to most traditional manufacturing methods (hours to days), thus limiting wider spread use. Here we demonstrate the use of a large area, photolithographic method for 3D metal printing, using an optically-addressable light valve (OALV) as the photomask, to print entire layers of metal powder at once. An optical sheet of multiplexed ~5 kW, 20 ms laser diode and ~1 MW, 7 ns Q-switched laser pulses are used to selectively melt each layer. Finally, the patterning of near infrared light is accomplished by imaging 470 nm light onto the transmissive OALV, which consists of polarization-selective nematic liquid crystal sandwiched between a photoconductor and transparent conductor for switching.

36 MATERIALS SCIENCE↗

SiC Diode Test Data

Fabricated SiC diodes are tested in the temperature range of 300 °C to 600 °C.

15 GEOTHERMAL ENERGY↗

Light-emitting diode technology status and directions: Opportunities for horticultural lighting

Here, light-emitting diode (LED) technology has advanced rapidly over the last decade, primarily driven by display and general illumination applications ("solid-state lighting (SSL) for humans"). These advancements have made LED lighting technically and economically advantageous not only for these applications, but also, as an indirect benefit, for adjacent applications such as horticultural lighting ("SSL for plants"). Moreover, LED technology has much room for continued improvement. In the near-term, these improvements will continue to be driven by SSL for humans (with indirect benefit to SSL for plants), the most important of which can be anticipated.

60 APPLIED LIFE SCIENCES↗