Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Description”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

A brief description of a new numerical framework for solving conservation laws: The method of space-time conservation element and solution element

A new numerical method for solving conservation laws is being developed. It differs substantially from the well established methods, i.e., finite difference, finite volume, finite element, and spectral methods, in both concept and methodology. It is much simpler than a typical high resolution method. No flux limiter or any technique related to characteristics is involved. No artificial viscosity or smoothing is introduced, and no moving mesh is used. Yet this method is capable of generating highly accurate shock tube solutions. The slight numerical overshoot and/or oscillations generated can be removed if a simple averaging formula initially used is replaced by a weighted formula. This modification has little effect on other parts of the solution. Because of its simplicity, generalization of this new method for multi-dimensional problems is straightforward.

Chang, Sin-Chung↗

Description of alpha-nucleus interaction cross sections for cosmic ray shielding studies

Nuclear interactions of high-energy alpha particles with target nuclei important for cosmic ray studies are discussed. Models for elastic, quasi-elastic, and breakup reactions are presented and compared with experimental data. Energy-dependent interaction cross sections and secondary spectra are presented based on theoretical models and the limited experimental data base.

Cucinotta, Francis A.↗

CSU FIRE 2 cirrus field experiment: Description of field deployment phase

The Colorado State University (CSU) surface observing systems are described. These systems were deployed at the Parsons, Kansas site during the FIRE 2 Cirrus Special Observing Period (SOP) from 13 Nov. - 7 Dec. 1991. The geographical coordinates of the site containing most of the CSU instrumentation are 37 deg. 18 min N. latitude and 96 deg. 30 min. W. longitude; site elevation was 269 meters. In addition, one surface meteorological and broadband flux observing site was maintained at the Tri City Airport which is approximately 18 miles due west of Parsons (37 deg. 20 min. N. latitude, 95 deg. 30 min. 30 sec. W. longitude). A map of the locations of the CSU deployment sites is presented. At the main Parsons site, the instrumentation was located directly adjacent to and north of a lake. Under most cirrus observing conditions, when the wing had a significant southernly component, the lake was upwind of the observing site. The measurements and observations collected during the experiment are listed. These measurements may be grouped into five categories: surface meteorology; infrared spectral and broadband measurements; solar spectral and broadband measurements; upper air measurements; and cloud measurements. A summary of observations collected at the Parsons site during the SOP are presented. The wind profiler, laser ceilometer, surface meteorology and surface broadband radiation instrumentation were operated on a continuous basis. All other systems were operated on an 'on demand' basis when cloud conditions merited the collection of data.

Cox, S.↗

Description of the Joint Damping Experiment (JDX)

The overall objective is to develop a small-scale shuttle flight experiment which allows researchers to: (1) characterize the influence of gravity and joint gaps on a small-scale truss model, and (2) evaluate the applicability of low-g aircraft test results for predicting on-orbit behavior. The experiment consists of a three-bay truss and associated hardware for truss excitation and measurement of oscillations. Other aspects of the investigation are presented in viewgraph form.

Folkman, Steven L.↗

Advanced Transport Operating System (ATOPS) utility library software description

The individual software processes used in the flight computers on-board the Advanced Transport Operating System (ATOPS) aircraft have many common functional elements. A library of commonly used software modules was created for general uses among the processes. The library includes modules for mathematical computations, data formatting, system database interfacing, and condition handling. The modules available in the library and their associated calling requirements are described.

Clinedinst, Winston C.↗

Analytic description of the electron temperature behavior in the upper ionosphere and plasmasphere

Approximate analytic solutions to the well-known and commonly used time-dependent electron energy balance equation for the upper ionosphere and plasmasphere have been obtained and are discussed. The various potential heating sources for the terrestrial plasmasphere are summarized and the corresponding electron temperatures and related characteristic heating and cooling times are calculated. A comparison between the analytic expressions for the temperature variations and relevant measurements shows excellent agreement.

Khazanov, G. V.↗

Kinetic description of electron beams in the solar chromosphere

We formulate the relativistic Fokker-Plank equation for a beam of accelerated electrons interacting with a partially ionized plasma. In our derivation we conserved those terms contributing to velocity diffusion and found that this effect cannot be neglected a priori. We compute the terms accounting for elastic and inelastic collisions with neutral hydrogen and helium. Collisions with neutral hydrogen are found to be dominant throughout the chromosphere, except at the uppermost layers close to the transition region. As an application, we compute the loss of energy and momentum for a power-law beam impinging on the solar chromosphere, for a particular case in which the Fokker-Planck equation can be integrated analytically. We find that most of the beam energy is deposited in a relatively thin region of the chromosphere, a result which is largely insensitive to the theoretical method employed to compute the energy deposition rate.

Gomez, Daniel O.↗

Globular cluster photometry with the Hubble Space Telescope. I - Description of the method and analysis of the core of 47 Tuc

Accurate photometry for individual post-main-sequence stars in the core of the Galactic globular cluster 47 Tuc is presented and analyzed using an empirical point spread function model and Monte Carlo simulations. A V vs. V-I color-magnitude diagrams is constructed which shows several distinct stellar types, including RGB and HB stars. Twenty-four blue straggler stars are detected in 47 Tuc, more concentrated toward the center of the cluster than the giants. This supports the hypothesis is that the stragglers are either coalesced stars or members of binary systems that are more massive than single stars. The radial profile of the projected stellar density is flat in the central region of 47 Tuc with a core radius of 23 +/- 2 arcsec. No signature of a collapsed core is evident. The observed radial cumulative distribution of stars rules out the presence of a massive compact object in the center.

Guhathakurta, Puragra↗

Comparison of diffusion and particle drift descriptions of radial transport in the earth's inner magnetosphere

The paper compares two approaches for describing the radial motion of charged particles in the equatorial plane of the earth's magnetosphere: the radial diffusion and the guiding-center drift. For this purpose, a time-dependent observation-based model electrostatic field is computed for the August 1990 storm event, and this field is used to (1) calculate the guiding-center drift of a ring of monoenergetic test particles and (2) compute the specific radial diffusion coefficient and solve the relevant diffusion equation. Generally, only fair agreement was found between the guiding-center and the diffusion calculation approaches. The best agreement could be obtained for the case of a series of small storms rather than for one substantial storm.

Riley, Pete↗

Description of the PMAD systems test bed facility and data system

The power management and distribution (PMAD) systems test bed facility, including the power sources and loads available, is discussed, and the PMAD data system (PDS) is described. The PDS controls the test-bed facility hardware, and monitors and records the electric power system control data bus and external data. The PDS architecture is discussed, and each of the subsystems is described.

Trase, Larry↗

Cryogenic Limb Array Etalon Spectrometer (CLAES) - Experiment description

The CLAES measurement concept, instrument design, and performance are presented, and the scientific capabilities and measurement modes are discussed. The CLAES experiment involves remote measurement of earth-limb emission spectra. Characteristic vibration-rotation line spectral radiances are obtained between 3.5 and 13 microns and inverted through an iterative relaxation process to yield pressure, temperature, and species mixing ratio. The UARS limb-viewing instruments, including CLAES, combined with the 57-deg orbit inclination, allow for measurements to 80-deg latitudes. CLAES requires high spectral resolution and high radiometric sensitivity to isolate and accurately measure weak emissions from trace species such as HCl and NO against intense backgrounds from abundant emitters such as CO2, H2O, and O3. Accuracy and precision of retrieved quantities, observational modes, and calibration modes are also discussed.

Roche, Aidan E.↗

The Ulysses solar wind plasma investigation - Experiment description and initial in-ecliptic results

During the in-ecliptic flight of Ulysses from the Earth toward its encounter with Jupiter, the Los Alamos solar wind plasma experiment has performed well. Briefly described, the instrumentation contains two independent electrostatic analyzers, one for ions and one for electrons. Initial analysis of solar wind electron core temperatures obtained between 1.15 and 3.76 AU yields a gradient of T (proportional to) R(exp -0.7) which is flatter than expected for adiabatic expansion of a single-temperature Maxwellian velocity distribution and steeper than that obtained from Mariner-Voyager.

Bame, S. J.↗

The injection and acceleration of particles in oblique shocks - A unified Monte Carlo description

Important problems are discussed concerning the effects of shock geometry on the injection of thermal particles and the process of standard Fermi particle acceleration in general. In pursuit of a self-consistent model that simultaneously describes shock structure and particle acceleration in shocks of arbitrary obliquity, a Monte Carlo simulation developed for parallel shocks is generalized to address oblique geometries. Attention is given to initial results concerning the ways in which injection and acceleration efficiency varies with obliquity and Mach number.

Baring, Matthew G.↗

The Oriented Scintillation Spectrometer Experiment - Instrument description

The Oriented Scintillation Spectrometer Experiment on the Arthur Holly Compton Gamma Ray Observatory satellite uses four actively shielded NaI (Tl)-CsI(Na) phoswich detectors to provide gamma-ray line and continuum detection capability in the 0.05-10 MeV energy range. The instrument includes secondary capabilities for gamma-ray and neutron detection between 10 and 250 MeV. The detectors have 3.8 deg x 11.04 deg (FWHM) fields of view defined by tungsten collimators. Each detector has an independent, single-axis orientation system which permits offset pointing from the spacecraft Z-axis for background measurements and multitarget observations. The instrument, and its calibration and performance, are described.

Johnson, W. N.↗

OCAM - A CELSS modeling tool: Description and results

Controlled Ecological Life Support System (CELSS) technology is critical to the Space Exploration Initiative. NASA's Kennedy Space Center has been performing CELSS research for several years, developing data related to CELSS design. We have developed OCAM (Object-oriented CELSS Analysis and Modeling), a CELSS modeling tool, and have used this tool to evaluate CELSS concepts, using this data. In using OCAM, a CELSS is broken down into components, and each component is modeled as a combination of containers, converters, and gates which store, process, and exchange carbon, hydrogen, and oxygen on a daily basis. Multiple crops and plant types can be simulated. Resource recovery options modeled include combustion, leaching, enzyme treatment, aerobic or anaerobic digestion, and mushroom and fish growth. Results include printouts and time-history graphs of total system mass, biomass, carbon dioxide, and oxygen quantities; energy consumption; and manpower requirements. The contributions of mass, energy, and manpower to system cost have been analyzed to compare configurations and determine appropriate research directions.

Drysdale, Alan↗

A Volatile Organic Analyzer for Space Station - Description and evaluation of a gas chromatography/ion mobility spectrometer

An on-board Volatile Organic Analyzer (VOA), an essential component of the Environmental Health System (EHS) air-quality monitoring strategy, is described. The strategy is aimed at warning the crew and ground personnel if volatile compounds exceed safe exposure limits. The VOA uses a combination of gas chromatography (GC) and ion-mobility spectrometry (IMS) for environmental monitoring and analysis. It is concluded that the VOA dual-mode detection capability and the ion mobilities in the drift region are unique features that can assist in the resolution of coeluting GC peaks. The VOA is capable of accurately identifying and quantifying target compounds in a complex mixture.

Limero, Thomas↗

The cryogenic limb array etalon spectrometer (CLAES) on UARS - Experiment description and performance

The design and the performance of the cryogenic limb array spectrometer (CLAES) aboard the NASA Upper Atmosphere Research Satellite are discussed. CLAES measures altitude profiles of temperature, pressure, O3, H2O, CH4, N2O, NO, NO2, N2O5, HNO3, ClONO2, HCl, CFC 11, CFC 12, and aerosol absorption coefficients for atmospheric layer between 10 and 60 km. Examples of atmospheric spectral emission profiles for a number of constituents are presented as well as responsivity and noise parameters.

Roche, A. E.↗

Cryogenic limb array etalon spectrometer (CLAES) - Experiment description and initial results

The primary objective of the CLAES experiment is to measure the altitude profiles of temperature and of a series of minor and trace species important to stratospheric ozone layer photochemistry and radiative structure. Ways in which the species to be measured by CLAES are distributed among the broad categories of source, radical, and reservoir species involved in ozone production and loss are illustrated. CLAES requires high spectral resolution and high radiometric sensitivity to isolate and accurately measure weak emissions from trace species such as HCl and NO against intense backgrounds from abundant emitters such as CO2, H2O, and O3. Spectroscopy is performed by tilt scanning one of the four solid etalons between 0 and 23 deg in conjunction with one or more of the nine selectable discrete interference filters.

Roche, Aidan E.↗