Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Capacitors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

A generalized multi-dimensional mathematical model for charging and discharging processes in a supercapacitor

A generalized three dimensional computational model based on unied formulation of electrode- electrolyte-electrode system of a electric double layer supercapacitor has been developed. The model accounts for charge transport across the solid-liquid system. This formulation based on volume averaging process is a widely used concept for the multiphase ow equations ([28] [36]) and is analogous to porous media theory typically employed for electrochemical systems [22] [39] [12]. This formulation is extended to the electrochemical equations for a supercapacitor in a consistent fashion, which allows for a single-domain approach with no need for explicit interfacial boundary conditions as previously employed ([38]). In this model it is easy to introduce the spatio-temporal variations, anisotropies of physical properties and it is also conducive for introducing any upscaled parameters from lower length{scale simulations and experiments. Due to the irregular geometric congurations including porous electrode, the charge transport and subsequent performance characteristics of the super-capacitor can be easily captured in higher dimensions. A generalized model of this nature also provides insight into the applicability of 1D models ([38]) and where multidimensional eects need to be considered. In addition, simple sensitivity analysis on key input parameters is performed in order to ascertain the dependence of the charge and discharge processes on these parameters. Finally, we demonstarted how this new formulation can be applied to non-planar supercapacitors

Single Domain↗

Synthesis and microstructural TEM investigation of CaCu{sub 3}Ru{sub 4}O{sub 12} ceramic and thin film

CaCu{sub 3}Ru{sub 4}O{sub 12} (CCRO) is a conductive oxide having the same structure as CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) and close lattice parameters. The later compound is strongly considered for high density parallel plates capacitors application due to its so-called colossal dielectric constant. The need for an electrode inducing CCTO epitaxial growth with a clean and sharp interface is therefore necessary, and CCRO is a good potential candidate. In this paper, the synthesis of monophasic CCRO ceramic is reported, as well as pulsed laser deposition of CCRO thin film onto (001) NdCaAlO{sub 4} substrate. Structural and physical properties of bulk CCRO were studied by transmission electron microscopy and electron spin resonance. CCRO films and ceramic exhibited a metallic behavior down to low temperature. CCRO films were (001) oriented and promoted a CCTO film growth with the same orientation. - Graphical Abstract: Structure of CaCu{sub 3}Ru{sub 4}O{sub 12} showing the RuO{sub 6} octahedra and the square planar environment for Cu{sup 2+}. Highlights: > In this study, we investigate the structural properties and microstructure of ceramics CaCu{sub 3}Ru{sub 4}O{sub 12}. > We study the conduction properties of polycrystalline material. > Then we synthesize the conductive thin film which is deposited on a high K material with the same structure (CaCu{sub 3}Ti{sub 4}O{sub 12}).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication and applications of copper sulfide (CuS) nanostructures

This review article presents different fabrication procedures (under the headlines of solvothermal routes, aerosol methods, solution methods and thermolysis), and applications (photocatalytic degradation, ablation of cancer cells, electrode material in lithium ion batteries and in gas sensing, organic solar cells, field emission properties, super capacitor applications, photoelectrochemical performance of QDSCs, photocatalytic reduction of organic pollutants, electrochemical bio sensing, enhanced PEC characteristics of pre-annealed CuS film electrodes) of copper sulfide (Covellite). - Highlights: • This review article presents the synthesis and applications of copper sulfide. • CuS has been used over the years for different applications in nanoscience. • Different synthetic protocols are followed for their preparation which help in the possible modifications in the morphology of CuS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Substrate effect on in-plane dielectric and microwave properties of Ba(Sn{sub 0.15}Ti{sub 0.85})O{sub 3} thin films

The microstructure and in-plane dielectric and microwave properties of Barium tin titanate Ba(Sn{sub 0.15}Ti{sub 0.85})O{sub 3} (BTS) thin films grown on (1 0 0) LaAlO{sub 3} and (1 0 0) MgO single-crystal substrates through sol-gel process were investigated. X-ray diffraction and field emission scanning electron microscopy were used to characterize crystal structure of phases and microstructure of the thin films, respectively. Microwave properties of the films were measured from 1 to 10 GHz by the interdigital capacitor configuration. The obvious differences in the dielectric and microwave properties are attributed to the stress in the films, which result from the lattice mismatch and difference in the thermal expansion coefficients between the film and substrates. This work clearly reveals the highly promising potential of BTS films for application in tunable microwave devices.

36 MATERIALS SCIENCE↗

Fabrication of antiferroelectric PLZT films on metal foils.

Fabrication of high-dielectric-strength antiferroelectric (AFE) films on metallic foils is technically important for advanced power electronics. To that end, we have deposited crack-free Pb{sub 0.92}La{sub 0.08}Zr{sub 0.95}Ti{sub 0.05}O{sub 3} (PLZT 8/95/5) films on nickel foils by chemical solution deposition. To eliminate the parasitic effect caused by the formation of a low-permittivity interfacial oxide, a conductive buffer layer of lanthanum nickel oxide (LNO) was coated by chemical solution deposition on the nickel foil before the deposition of PLZT. Use of the LNO buffer allowed high-quality film-on-foil capacitors to be processed in air. With the PLZT 8/95/5 deposited on LNO-buffered Ni foils, we observed field- and thermal-induced phase transformations of AFE to ferroelectric (FE). The AFE-to-FE phase transition field, E{sub AF} = 225 kV/cm, and the reverse phase transition field, E{sub FA} = 190 kV/cm, were measured at room temperature on a {approx}1.15 {micro}m-thick PLZT 8/95/5 film grown on LNO-buffered Ni foils. The relative permittivities of the AFE and FE states were {approx}600 and {approx}730, respectively, with dielectric loss {approx}0.04 at room temperature. The Curie temperature was {approx}210 C. The thermal-induced transition of AFE-to-FE phase occurred at {approx}175 C. Breakdown field strength of 1.2 MV/cm was measured at room temperature.

36 MATERIALS SCIENCE↗

Fabrication and dielectric property of ferroelectric PLZT films grown on metal foils.

We have grown ferroelectric Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} (PLZT) films on platinized silicon and LaNiO{sub 3}-buffered nickel substrates by chemical solution deposition using a sol-gel process based on acetic acid chemistry. The following measurements were obtained under zero-bias field: relative permittivity of {approx}960 and dielectric loss of {approx}0.04 on the PLZT film grown on Pt/Si substrates, and relative permittivity of {approx}820 and dielectric loss of {approx}0.06 on the PLZT film grown on LNO-buffered Ni substrates. In addition, a relative permittivity of 125 and dielectric loss of 0.02 were measured at room temperature under a high bias field of 1 x 10{sup 6} V/cm on PLZT deposited on LNO-buffered nickel substrate. Furthermore, a steady-state leakage current density of {approx}8.1 x 10{sup -9} A/cm{sup 2} and mean breakdown field strength of 1.7 x 10{sup 6} V/cm were measured at room temperature. Finally, remanent polarization (P{sub r}) of {approx} 2.0 x 10{sup -5} C/cm{sup 2}, coercive electric field (E{sub c}) of {approx}3.4 x 10{sup 4} V/cm, and energy density of {approx}45 J/cm{sup 3} were determined from room-temperature hysteresis loop measurements on PLZT/LNO/Ni film-on-foil capacitors with 250-{micro}m-diameter platinum top electrodes.

36 MATERIALS SCIENCE↗

High energy storage properties of (Ni1/3Nb2/3)4+ complex-ion modified (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3 ceramics

Highlights: • BCZT-xNN ceramics showed single phase perovskite structure without an obvious second phase after adding NN, and exhibited both good temperature (−55 to 160 °C) and frequency (10{sup 2}–10{sup 7} Hz) stability. • The highest energy storage density can reach 0.66 J/cm{sup 3} and the energy efficiency is 88.1% was achieved in x = 0.3. • The environmental friendly (lead-free) BCZT-xNN ceramics are good candidate for application in energy storage devices. • This paper also developes a new method to obtain high energy storage density and efficiency of ceramic capacitor, which aims to adjust the T{sub c} of ceramics far below room temperature. - Abstract: In this study, paraelectric ceramics, (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90}){sub 1-x}(Ni{sub 1/3}Nb{sub 2/3}){sub x}O{sub 3,} abbreviated as BCZT-xNN (with x = 0.1, 0.2, 0.3, 0.4) were prepared via a solid-state reaction method. By introducing a B-site complex-ion, (Ni{sub 1/3}Nb{sub 2/3}){sup 4+}, the Curie temperature of the ceramic could be reduced to below room temperature. The effects of this B-site (Ni{sub 1/3}Nb{sub 2/3}){sup 4+} complex-ion substitution on the phase structure, surface microstructure as well as the dielectric, ferroelectric, and energy storage properties of the ceramic were systematically investigated. After adding NN, BCZT-xNN shows a single phase perovskite structure without evidence of a second phase . In addition, we observed high stability with respect to both temperature (−55 to 160 °C) and frequency (10{sup 2}–10{sup 7} Hz). Doping with NN produces slim polarization-electric field hysteresis loops and enhanced energy storage properties, while the efficiency decreases. When x = 0.3, the highest energy storage density reached 0.66 J/cm{sup 3} for a high electric field (20 kV/mm), and the respective energy efficiency was 88.1%. These properties indicate that the environmental friendly BCZT-xNN ceramics are promising candidates for commercial energy storage devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced temperature-stable dielectric properties in oxygen annealed 0.85(K0.5Na0.5)NbO3-0.15SrZrO3 ceramic

Highlights: • Prepared O{sub 2}-annealed KNN-15SZ could meet the EIA X8R specification. • Oxygen annealing resulted in different variation of T{sub m} of cores and shells. • Variation of T{sub m} related to decrease of oxygen vacancies and diffusion of KNN. • Enhanced dielectric temperature stability attributed to change of PNRs size. - Abstract: The structure, morphology and dielectric properties of the oxygen annealed (O{sub 2}-annealed) and untreated (as-prepared) 0.85(K{sub 0.5}Na{sub 0.5}) NbO{sub 3}-0·15SrZrO{sub 3} (KNN-15SZ) ceramics were investigated. The temperature dependence of dielectric permittivity shows two diffuse dielectric peaks associated with duplex core-shell structure, leading to relatively stable dielectric permittivity in a wide temperature range. Interestingly, the O{sub 2}-annealed sample with the operating temperature range of −104 °C–157 °C could meet the EIA X8R specification, which is superior to the as-prepared one (−98 °C–130 °C) for the EIA X7R specification. Furthermore, the dielectric contribution from cores and shells of both samples was divided by the Lorentz fitting. The relation between relaxation frequency and temperature of both samples obeyed the Vogel-Fulcher law. This finding could pave a possible way to modify dielectric temperature stability for multilayer ceramic chip capacitors applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of porous MnO2-CoO microsheets and nanocones as a high-performance battery-type capacitive material

Highlights: • Porous MnO{sub 2}-CoO microsheets and nanocones (MCMSNCs) are synthesized. • Sodium dodecyl sulfate controls the formation of specific metal oxide structures. • MCMSNCs deliver excellent capacitive performance as a battery-type material. - Abstract: A facile method via sodium dodecyl sulfate (SDS)-templated oil-bath followed by annealing treatment is reported to synthesize porous MnO{sub 2}-CoO microsheets and nanocones (MCMSNCs). Herein, surfactant SDS is firstly used to obtain Mn/Co hydroxide ultrathin microsheets and nanocones precursor, which is then transformed into interconnected porous MCMSNCs after heat treatment. As a battery-type capacitive electrode micro/nanomaterial, MCMSNCs exhibit an original specific capacity (148 C g{sup −1}) at a current density of 1 A g{sup −1} by chronopotentiometry. Moreover, MCMSNCs deliver good rate performance with 77% capacity retention from 1 to 16 A g{sup −1} and excellent cycle life with 20% loss of the maximum value as well as 118% retention of the initial one after 3000 cycles. The excellent capacitive performance of porous MCMSNCs endows it potential use as an anode electrode material in the application of electrochemical capacitors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High energy storage density of temperature-stable X9R ceramics

Highlights: • The addition of KNbO{sub 3} improved the temperature-stable properties and energy density. • The x = 0.07 and x = 0.09 sample met the X8R requirements. • The x = 0.03 and x = 0.05 sample met the X9R requirements. • The maximum discharge energy density of x = 0.05 sample reached up to 2 J/cm{sup 3} at 17.85 kV/mm. - Abstract: The effects of KNbO{sub 3} addition on the temperature stability of dielectric properties and energy-storage performances of Sr{sub 0.5}Na{sub 0.25}Bi{sub 0.25}TiO{sub 3}-MgO ((1-x)SNBTM5-xKN) ceramics were systematically investigated. It shows that KNbO{sub 3} has completely diffused into SNBT lattice to form a solid solutions. Two obvious maxima in permittivity curves were observed due to the formation of the polar nanoregions. For the sample with x = 0.05 addition, its permittivity variation region, where △ε'/ε'{sub 25 °C} is no more than ± 15%, retains wide the range from −55 °C to 200 °C, indicating that the ceramics can meet the requirement of X9R specification. Furthermore, this sample shows a high electric breakdown strength of 17.85 kV/mm and a high discharge energy density of 2 J/cm{sup 3}. The noticeable reduced remnant polarization induced by KNbO{sub 3} addition also contributes to the improved energy-storage performances. Thus, these novel ceramics with the aforementioned characteristics will potentially benefit the applications of high pulse power capacitors at high temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A bi-functional ferroelectric Pb(Zr0.52Ti0.48)O3 films: Energy storage properties and ferroelectric photovoltaic effects

Highlights: • PZT films by sol-gel method exhibited a higher energy densities (∼11.2 J/cm{sup 3}) and energy conversion efficiency (∼68%). • Pt/PZT/Pt devices showed the higher open circuit voltage (V{sub oc} ∼1 V), larger short circuit current (J{sub sc} ∼0.1 mA/cm{sup 2}). • Pt/PZT/Pt devices might improve the properties of energy storage and photovoltage in ferroelectric films. - Abstract: In this work, we reported a bi-functional ferroelectric Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) films which show energy storage properties and photovoltaic effects. The PZT films were crystallized into pure pseudo-cubic structure with the (001) preferred orientation. The polarization characterizations revealed a large recoverable energy storage density (∼11.2 J/cm{sup 3}) and a high energy conversion efficiency (∼68%) with good thermal stability (25 °C–100 °C) and fast response (>10 Hz). Meanwhile, the Pt/PZT/Pt capacitor presented a significant photovoltaic effect. The open circuit voltage and the short circuit current were -0.92 V and 139 μA/cm{sup 2} at original state, respectively, while they were slightly increased to -1.01 V and 155 μA/cm{sup 2} in polarization-up state, and slightly decreased to -0.77 V and 90 μA/cm{sup 2} in polarization-down state. The maximum power conversion efficiency was enhanced one order of magnitude than that of polycrystalline PZT film reported elsewhere. Our study opens up a pathway toward developing bi-functional ferroelectric devices with simultaneously high energy storage density and high photovoltaic performance.

14 SOLAR ENERGY↗

Interfacial Transition Regions at Germanium/Hf Oxide Based Dielectric Interfaces: Qualitative Differences Between Non-Crystalline Hf Si Oxynitride and Nanocrystalline HfO2 Gate Stacks

The contribution from a relatively low-K SiON (K {approx} 6) interfacial transition region (ITR) between Si and transition metal high-K gate dielectrics such as nanocrystalline HfO2 (K {approx} 20), and non-crystalline Hf Si oxynitride (K {approx} 10-12) places a significant limitation on equivalent oxide thickness (EOT) scaling. This limitation is equally significant for metal-oxide-semiconductor capacitors and field effect transistors, MOSCAPs and MOSFETs, respectively, fabricated on Ge substrates. This article uses a novel remote plasma processing approach to remove native Ge ITRs and bond transition metal gate dielectrics directly onto crystalline Ge substrates. Proceeding in this way we identify (i) the source of significant electron trapping at interfaces between Ge and Ge native oxide, nitride and oxynitride ITRs, and (ii) a methodology for eliminating native oxide, or nitride IRTs on Ge, and achieving direct contact between nanocrystalline HfO2 and non-crystalline high Si3N4 content Hf Si oxynitride alloys, and crystalline Ge substrates. We then combine spectroscopic studies, theory and modeling with electrical measurements to demonstrate the relative performance of qualitatively different nanocrystalline and non-crystalline gate dielectrics for MOS Ge test devices.

36 MATERIALS SCIENCE↗

Electric double layer capacitance for ionic liquids in nanoporous electrodes: Effects of pore size and ion composition

The energy density of an electric double layer (EDL) capacitor, a type of supercapacitor, depends on the ion distribution within the micropores of electrodes that are typically made of amorphous carbon. By using coarse-grained models and the classical density functional theory, we investigate the distributions of ionic species among different idealized nanopores in contact with an asymmetric ionic liquid mixture and the effects of the bulk electrolyte composition on capacitive energy storage. We find that a charged pore is always small-ion selective, provided all ions have the same valence and similar non-electrostatic interactions. While small ions enhance both the EDL capacitance and the accessibility of micropores, an ionic mixture containing ions of different sizes may yield a capacitance higher than those corresponding to pure ionic liquids. Furthermore, the increased capacitance may be attributed to more efficient ion packing near the charged surface. At certain conditions, the improvement is on a par with the anomalous capacitance rise for pure ionic liquids in electrodes with ultranarrow pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid-state polymer magnesium supercapacitor

Here, the present article focuses on the development of a highly ion-conductive, solvent-free, solid-state polymer electrolyte membrane (PEM) via photopolymerization of polyethylene glycol diacrylate (PEGDA) network from its homogeneous melt mixtures containing succinonitrile (SCN) plasticizer and magnesium bis(trifluoromethane sulfonyl) imide Mg(TFSI) 2 salt. The above solid-state Mg-PEM exhibits a Helmholtz electric double-layer capacitor (EDLC) behavior in its supercapacitive symmetric carbonaceous electrode configuration. The electrochemical stability for this PEM membrane (20/40/40 PEGDA/SCN/Mg (TFSI) 2 ) was found to be approximately 3 V from linear sweep voltammetry with a specific capacitance of about 44 F/g from cyclic voltammetry and an energy density of approximately 17 Wh/kg in the 0–2 V range from the constant current density (CCD) experiment. Of particular interest is its excellent capacity retention of over 11,200 cycles, thus tested with the Coulombic efficiency of over 87%. Moreover, the energy density after extensive cycling for 11,200 has increased to approximately 56 Wh/kg at 10 mV/s in the potential range of 0–3 V relative to 17 Wh/kg in the potential range of 0–2 V at the same scan rate, attesting the excellent electrochemical stability and long life of the present Mg-PEM supercapacitor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion-Exchange and Cation Solvation Reactions in Ti 3 C 2 MXene

Ti 3 C 2 and other two-dimensional transition metal carbides known as MXenes are currently being explored for many applications involving intercalated ions, from electrochemical energy storage, to contaminant sorption from water, to selected ion sieving. We report here a systematic investigation of ion exchange in Ti 3 C 2 MXene and its hydration/dehydration behavior. We have investigated the effects of the presence of LiCl during the chemical etching of the MAX phase Ti 3 AlC 2 into MXene Ti 3 C 2 T x (T stands for surface termination) and found that the resulting MXene has Li + cations in the interlayer space. We successfully exchanged the Li + cations with K + , Na + , Rb + , Mg 2+ , and Ca 2+ (supported by X-ray photoelectron and energy-dispersive spectroscopy) and found that the exchanged material expands on the unit-cell level in response to changes in humidity, with the nature of expansion dependent on the intercalated cation, similar to behavior of clay minerals; stepwise expansions of the basal spacing were observed, with changes consistent with the size of the H 2 O molecule. Thermogravimetric analysis of the dehydration behavior of these materials shows that the amounts of H 2 O contained at ambient humidity correlates simply with the hydration enthalpy of the intercalated cation, and that the diffusion of the exiting H 2 O proceeds with kinetics similar to clays. Furthermore, these results have implications for understanding, controlling, and exploiting structural changes and H 2 O sorption in MXene films and powders utilized in applications involving ions, such as electrochemical capacitors, sensors, reverse osmosis membranes, or contaminant sorbents.

36 MATERIALS SCIENCE↗

NMR and Theoretical Study of In-Pore Diffusivity of Ionic Liquid–Solvent Mixtures

We report despite having a lower energy density than common batteries, electric double-layer capacitors (EDLCs) offer several advantages for high-power applications, including high power density, quick charge and discharge time, and long cycle life. Room-temperature ionic liquids (RTILs) have been intensely studied as promising electrolytes for applications in ELDCs because of their wide potential window, low volatility, as well as thermal and chemical stability. The main deficiency of neat RTILs in such applications is the sluggish diffusivity, which restricts the EDLCs’ power density. To alleviate the slow diffusivity, RTILs can be used in a mixture with organic solvents. In this study, we applied two-dimensional exchange nuclear magnetic resonance spectroscopy (2D EXSY NMR) and molecular dynamics (MD) simulations to investigate the diffusivity of anions of an RTIL, namely, 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide (BMIM + –TFSI – ), dissolved in five different organic solvents, in the micropores of activated carbon. We determined that the relative concentrations of ions in solutions in the micropores were higher than those in the bulk solutions and were also solvent-dependent. The ion diffusivities in the pores were found to be almost 2 orders of magnitude slower than in the bulk solutions, with methanol showing the largest relative disparity. These results suggested that the interactions of solvents with the activated carbon are critical not only to the power density of EDLCs but also to the energy density. The comparisons of ion diffusivities between the experiments and the MD simulations suggest the need to consider also the surface functionalities of activated carbon for the simulation of ion diffusion in the micropores of activated carbon.

electric double layer capacitors↗

A Generic Model for Electric Double Layers in Porous Electrodes

The performance of electric-double-layer capacitors (EDLCs) hinges on microscopic charge distributions near the electrode/electrolyte interfaces. Whereas practical EDLCs consist of electrodes made of amorphous porous materials, theoretical understanding of EDLCs is mostly based on EDL structure near a planar surface or on simplistic models that have little relevance to realistic systems. In this work, we propose a spherical shell model to account for both pore size and curvature effects of amorphous porous materials. The EDL structure in spherical shells has been investigated over a broad range of pore sizes and curvatures by use of classic density functional theory. Theoretical results reveal that the curvature effects on convex and concave EDLs are drastically different and that materials with extensive convex surfaces will lead to maximized capacitance. Like a slit pore, the spherical shell model also predicts oscillatory variation of capacitance with pore size, but the oscillatory behavior is magnified as the curvature increases. The joint effects of pore size and curvature identified in this work give new insight into materials design for porous electrodes with optimal EDLC performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Behavior of Nanoporous Supercapacitors with Oligomeric Ionic Liquids

According to a recent study [Matsumoto, M. ; J. Am. Chem. Soc. 2017, 139, 16072-16075], an oligomeric ionic liquid (OIL) may exhibit a wide electrochemical window and an exceptionally high capacitance in electric double layer (EDL) transistors. However, little is known on applicability of OILs in EDL capacitors with porous electrodes. To understand the capacitive performance of OILs, here we investigate the charging behavior, EDL structure, and capacitance for different types of OILs using the classical density functional theory. In contrast to their application to field-effect transistors, the capacitive performance of OILs in nanoporous electrodes is sensitive to the charging potential. We report that although adoption of oligomeric cations shows little advantage for the electrical charging of a positive electrode, they enhance the energy storage density for negative electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗