Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONFIGURATION INTERACTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Computation of vortex sheet roll-up in the Trefftz plane

Two vortex-sheet evolution problems arising in aerodynamics are studied numerically. The approach is based on desingularizing the Cauchy principal value integral which defines the sheet's velocity. Numerical evidence is presented which indicates that the approach converges with respect to refinement in the mesh-size and the smoothing parameter. For elliptic loading, the computed roll-up is in good agreement with Kaden's asymptoic spiral at early times. Some aspects of the solution's instability to short-wavelength perturbations, for a small value of the smoothing parameter, are inferred by comparing calculations performed with different levels of computer round-off error. The tip vortices' deformation, due to their mutual interaction, is shown in a long-time calculation. Computations for a simulated fuselage-flap configuration show a complicated process of roll-up, deformation and interaction involving the tip vortex and the inboard neighboring vortices.

Krasny, Robert↗
NASA NTRS1994

Global, quasi-steady dynamics of the distant solar wind 2: Deformation of the heliospheric current sheet

A three-dimensional (3-D) magnetohydrodynamic (MHD) numerical model is used to trace global deformations of the heliospheric current sheet (HCS) caused by large-scale dynamical interactions associated with corotating solar wind flows. Configurations incorporating the tilted-dipole geometry are investigated out past 30 AU for a variety of dipole tilt angles, alpha. Inclusion of the full, 3-D interplanetary dynamics allows north-south displacements and the east-west warping of the HCS by advective corotational effects to be accurately assessed for the first time. It is found that large-scale spatial correlations between velocity and density imposed at the coronal source (i.e., the geometric arrangement whereby regions of high-speed low-density material lying adjacent to areas of slow, dense flow interact obliquely under the influence of solar rotation) result in a distinctive pattern of deformation of the HCS. For an alpha = 30 deg tilted-dipole example, it is shown that typical zonal variations in radial velocity lead to significant folding of the HCS within about 5 AU of the Sun. By 10 AU, additional sharp bends appear near the latitudinal extremes of the HCS surface, where it is overtaken by shock fronts driven by 3-D corotating interaction regions (CIRs). Moreover, the model suggests that inside about 20 AU, major plasma structures are systematically organized, about the HCS, such that the greatest concentrations of material and magnetic field (the centroids of the 3-D CIR structures) are coincident with the folded crests of the HCS (near heliographic latitudes lambda = +/- alpha). Thus, in these circumstances many of the more interesting dynamical features inconveniently lie well away from the heliographic equator. At larger heliocentric distances, where neighboring CIRs begin to interact strongly, the warping of the HCS abates dramatically and the association between folds in the HCS and major field and density concentrations is weakened and ultimately breaks down. On the basis of the model calculations, quasi-steady deformations and related phenomena should figure prominently in the interplanetary medium, except during those periods when the magnetic dipole and solar spin axes are nearly aligned (alpha is approximately less than 10 deg). Even then, they may be of significance if there are any substantial local warps or kinks in the streamer belt.

Pizzo, V. J.↗
DOE OSTI2012

Evaluation of the New CNDV Option of the Community Land Model: Effects of Dynamic Vegetation and Interactive Nitrogen on CLM4 Means and Variability

The Community Land Model, version 4 (CLM4) includes the option to run the prognostic carbon–nitrogen (CN) model with dynamic vegetation (CNDV). CNDV, which simulates unmanaged vegetation, modifies the CN framework to implement plant biogeography updates. CNDV simulates a reasonable present-day distribution of plant functional types but underestimates tundra vegetation cover. The CNDV simulation is compared against a CN simulation using a vegetation distribution generated by CNDV and against a carbon-only simulation with prescribed nitrogen limitation (CDV). The comparisons focus on the means and variability of carbon pools and fluxes and biophysical factors, such as albedo, surface radiation, and heat fluxes. The study assesses the relative importance of incorporating interactive nitrogen (CDV to CNDV) versus interactive biogeography (CN to CNDV) in present-day equilibrium simulations. None of the three configurations performs consistently better in simulating carbon or biophysical variables compared to observational estimates. The interactive nitrogen ( N ) cycle reduces annual means and interannual variability more than dynamic vegetation. Dynamic vegetation reduces seasonal variability in leaf area and, therefore, in moisture fluxes and surface albedo. The interactive N cycle has the opposite effect of enhancing seasonal variability in moisture fluxes and albedo. CNDV contains greater degrees of freedom than CN or CDV by adjusting both through nitrogen–carbon interactions and through vegetation establishment and mortality. Thus, in these equilibrium simulations, CNDV acts as a stronger “regulator” of variability compared to the other configurations. To conclude, discussed are plausible explanations for this behavior, which has been shown in past studies to improve climate simulations through better represented climate–vegetation interactions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1985

On the configuration of the polar cusps in earth's magnetosphere

The interaction between the solar wind and the earth's vacuum dipole field leads to the formation of a discontinuity called the magnetopause. In the standard picture, the magnetopause confines the magnetic field in such a manner that the polar cusp field lines originate from high latitudes in the dayside ionosphere and end at the two magnetic neutral points. Wu (1983, 1984) has questioned this standard picture of the polar cusp. MHD simulations indicate the existence of a current sheet above the polar cusp region, called 'the cusp current sheet' by Wu. Wu (1983) concluded that the difference between his cusp configuration and the standard picture is due to the fact that his geometry results from a plasma model, whereas the standard picture is based on a vacuum concept. In the present investigation, Wu's conclusion is questioned, and it is demonstrated that the standard cusp configuration is not restricted to the vacuum magnetosphere.

Voigt, G.-H.↗
DOE OSTI2022

Particle configurations in the $NN\bar K$ system

Three-body AAB model for the $NN\bar K$(s NN = 0) kaonic cluster is considered based on the configuration space Faddeev equations. Within a single channel approach, the difference between masses of nucleons and kaons and the charge independence breaking of nucleon-nucleon interaction are taken into consideration. We definite the particle configurations in the system according to the particle masses and pair potentials. There are two sets of the particle configurations, ppK¯, npK¯ 0 and nnK¯ 0 , npK¯, charged and neutral. The three-body calculations are performed by applying NN and NK¯ phenomenological isospin-dependent potentials. The mass and energy spectra related to the particle configurations are presented. We evaluate the mass and energy uncertainties for the NNK¯ model. As a result, an analogy to NNN model for the 3 H and 3 He nuclei is proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2012

Lithium-based surfaces controlling fusion plasma behavior at the plasma-material interface

The plasma-material interface and its impact on the performance of magnetically confined thermonuclear fusion plasmas are considered to be one of the key scientific gaps in the realization of nuclear fusion power. At this interface, high particle and heat flux from the fusion plasma can limit the material's lifetime and reliability and therefore hinder operation of the fusion device. Lithium-based surfaces are now being used in major magnetic confinement fusion devices and have observed profound effects on plasma performance including enhanced confinement, suppression and control of edge localized modes (ELM), lower hydrogen recycling and impurity suppression. The critical spatial scale length of deuterium and helium particle interactions in lithium ranges between 5-100 nm depending on the incident particle energies at the edge and magnetic configuration. Lithium-based surfaces also range from liquid state to solid lithium coatings on a variety of substrates (e.g., graphite, stainless steel, refractory metal W/Mo/etc., or porous metal structures). Temperature-dependent effects from lithium-based surfaces as plasma facing components (PFC) include magnetohydrodynamic (MHD) instability issues related to liquid lithium, surface impurity, and deuterium retention issues, and anomalous physical sputtering increase at temperatures above lithium's melting point. The paper discusses the viability of lithium-based surfaces in future burning-plasma environments such as those found in ITER and DEMO-like fusion reactor devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Intermolecular interactions between imidazole derivatives intercalated in layered solids. Substituent group effect

This study sheds light on the intermolecular interactions between imidazole derive molecules (2-methyl-imidazole, 2-ethyl-imidazole and benzimidazole) intercalated in T[Ni(CN){sub 4}] layers to form a solid of formula unit T(ImD){sub 2}[Ni(CN){sub 4}]. These hybrid inorganic–organic solids were prepared by soft chemical routes and their crystal structures solved and refined from X-ray powder diffraction data. The involved imidazole derivative molecules were found coordinated through the pyridinic N atom to the axial positions for the metal T in the T[Ni(CN){sub 4}] layer. In the interlayers region ligand molecules from neighboring layers remain stacked in a face-to-face configuration through dipole–dipole and quadrupole–quadrupole interactions. These intermolecular interactions show a pronounced dependence on the substituent group and are responsible for an ImD-pillaring concatenation of adjacent layers. This is supported by the structural information and the recorded magnetic data in the 2–300 K temperature range. The samples containing Co and Ni are characterized by presence of spin–orbit coupling and pronounced temperature dependence for the effective magnetic moment except for 2-ethyl-imidazole related to the local distortion for the metal coordination environment. For this last one ligand a weak ferromagnetic ordering ascribed to a super-exchange interaction between T metals from neighboring layers through the ligands π–π interaction was detected. - Graphical abstract: In the interlayers region imidazole derivative molecules are oriented according to their dipolar and quadrupolar interactions and minimizing the steric impediment. Highlights: • Imidazole derivatives intercalation compounds. • Intermolecular interaction between intercalated imidazole derivatives. • Hybrid inorganic–organic solids. • Pi–pi interactions and ferromagnetic coupling. • Dipolar and quadrupolar interactions between intercalated imidazole derivatives.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Nodal surfaces and interdimensional degeneracies

The aim of this paper is to shed light on the topology and properties of the nodes (i.e., the zeros of the wave function) in electronic systems. Using the “electrons on a sphere” model, we study the nodes of two-, three-, and four-electron systems in various ferromagnetic configurations (sp, p{sup 2}, sd, pd, p{sup 3}, sp{sup 2}, and sp{sup 3}). In some particular cases (sp, p{sup 2}, sd, pd, and p{sup 3}), we rigorously prove that the non-interacting wave function has the same nodes as the exact (yet unknown) wave function. The number of atomic and molecular systems for which the exact nodes are known analytically is very limited and we show here that this peculiar feature can be attributed to interdimensional degeneracies. Although we have not been able to prove it rigorously, we conjecture that the nodes of the non-interacting wave function for the sp{sup 3} configuration are exact.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Small Reactors in Microgrids: Technical Studies Guidance

This report provides initial guidance for the technical studies that are needed for the integration of small reactors (SR)—i.e., small modular reactors (SMR) and microreactors—in microgrids. Power-system engineering issues related to the configuration of these microgrids and their interconnection and interaction with the grid are identified. This guidance applies microgrid concepts to the deployment of SRs for a range of use cases (scenarios). Further, it identifies issues and necessary studies related to laboratory testing and validation of various configurations of SR in microgrids.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Experimental study of the edge radial electric field in different drift configurations and its role in the access to H-mode at ASDEX Upgrade

The formation of the equilibrium radial electric field (Er) has been studied experimentally at ASDEX Upgrade (AUG) in L-modes of “favorable” (ion ∇ B-drift toward primary X-point) and “unfavorable” (ion ∇ B-drift away from primary X-point) drift configurations, in view of its impact on H-mode access, which changes with drift configurations. Edge electron and ion kinetic profiles and impurity velocity and mean-field Er profiles across the separatrix are investigated, employing new and improved measurement techniques. The experimental results are compared to local neoclassical theory as well as to a simple 1D scrape-off layer (SOL) model. It is found that in L-modes of matched heating power and plasma density, the upstream SOL Er and the main ion pressure gradient in the plasma edge are the same for either drift configurations, whereas the Er well in the confined plasma is shallower in unfavorable compared to the favorable drift configuration. The contributions of toroidal and poloidal main ion flows to Er, which are inferred from local neoclassical theory and the experiment, cannot account for these observed differences. Furthermore, it is found that in the L-mode, the intrinsic toroidal edge rotation decreases with increasing collisionality and it is co-current in the banana-plateau regime for all different drift configurations at AUG. This gives rise to a possible interaction of parallel Pfirsch–Schlüter flows in the SOL with the confined plasma. Thus, the different H-mode power threshold for the two drift configurations cannot be explained in the same way at AUG as suggested by LaBombard et al. [Phys. Plasmas 12, 056111 (2005)] for Alcator C-Mod. Finally, comparisons of Er profiles in favorable and unfavorable drift configurations at the respective confinement transitions show that also the Er gradients are all different, which indirectly indicates a different type or strength of the characteristic edge turbulence in the two drift configurations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1999

Experiments on Diffusion Flame Structure of a Laminar Vortex Ring

The study of flame-vortex interactions provides one of the means to better understand turbulent combustion, and allows for canonical configurations that contain the fundamental elements found in turbulent flames, These include concentrated vorticity, entrainment and mixing, strain and nonequilibrium phenomena, diffusion and differential diffusion, partial premixing and diluent effects, and heat release effects. In flame- vortex configurations, these fundamental elements can be studied under more controlled conditions than is possible in direct investigations of turbulent flames. Since the paper of Marble, the problem of the flame-vortex interaction has received considerable attention theoretically, numerically and experimentally. Several configurations exist for study of the premixed flame/vortex ring interaction but more limited results have been obtained to date for the diffusion flame/vortex ring case. The setup of Chen and Dahm, which is conceptually similar to that of Karagozian and Manda and Karagozian, Suganuma and Strom where the ring is composed of fuel and air and combustion begins during the ring formation process, is used in the current study. However, it is essential to conduct the experiments in microgravity to remove the asymmetries caused by buoyancy and thus obtain highly symmetric and repeatable interactions. In previous studies it was found that the flame structure of the vortex ring was similar to that obtained analytically by Karagozian and Manda. Dilution of propane with nitrogen led mainly to a reduction in flame luminosities, flame burnout times were affected by both fuel volumes and amount of dilution, and a simple model of the burnout times was developed. In this paper, a discussion on reacting ring displacement and flame burnout time will be given, and the flame structures of vortex rings containing ethane and air will be compared to those of propane reacting in air.

Chen, Shin-Juh↗
NASA NTRS2007

CFD Computation of Broadband Fan Interaction Noise

In this study, a 3-D, unsteady, Reynolds Averaged Navier Stokes CFD code coupled to an acoustic calculation is used to predict the contribution of the exit guide vanes to broadband fan noise. The configuration investigated is that corresponding to the NASA Source Diagnostic Test (SDT) 22-in fan rig. Then an acoustic model introduced by Nallasamy which is based on 2-D strip theory is used to compute the broadband rotor-stator interaction noise. One configuration from the SDT matrix is considered here: the fan speed correlating to approach, and outlet guide vane count designed for cut-off of the blade passage frequency. Thus, in the chosen configuration, there are 22 rotor blades and 54 stator blades. The stators are located 2.5 tip chords downstream of the rotor trailing edge. The RANS computations are used to obtain the spectra of the unsteady surface pressure on the exit guide vanes. This surface pressure is then integrated together with the Green's function for and infinite cylindrical duct to obtain the acoustic field. The results from this investigation validate the use of the CFD code along with the acoustic model for broadband fan noise predictions. The validation enables future investigations such as the determination of rotor tip clearance and stator solidity effects on fan rotor-stator interaction noise.

Grace, Sheryl M.↗
DOE OSTI2016

Evaluation of stochastic particle dispersion modeling in turbulent round jets

ODT (one-dimensional turbulence) simulations of particle-carrier gas interactions are performed in the jet flow configuration. Particles with different diameters are injected onto the centerline of a turbulent air jet. The particles are passive and do not impact the fluid phase. Their radial dispersion and axial velocities are obtained as functions of axial position. The time and length scales of the jet are varied through control of the jet exit velocity and nozzle diameter. Dispersion data at long times of flight for the nozzle diameter (7 mm), particle diameters (60 and 90 µm), and Reynolds numbers (10, 000–30, 000) are analyzed to obtain the Lagrangian particle dispersivity. Flow statistics of the ODT particle model are compared to experimental measurements. It is shown that the particle tracking method is capable of yielding Lagrangian prediction of the dispersive transport of particles in a round jet. In this study, three particle-eddy interaction models (Type-I, -C, and -IC) are presented to examine the details of particle dispersion and particle-eddy interaction in jet flow.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2012

Genesis of Twin Tropical Cyclones as Revealed by a Global Mesoscale Model: The Role of Mixed Rossby Gravity Waves

In this study, it is proposed that twin tropical cyclones (TCs), Kesiny and 01A, in May 2002 formed in association with the scale interactions of three gyres that appeared as a convectively-coupled mixed Rossby gravity (ccMRG) wave during an active phase of the Madden-Julian Oscillation (MJO). This is shown by analyzing observational data and performing simulations using a global mesoscale model. A 10-day control run is initialized at 0000 UTC 1 May 2002 with grid-scale condensation but no cumulus parameterizations. The ccMRG wave was identified as encompassing two developing and one non-developing gyres, the first two of which intensified and evolved into the twin TCs. The control run is able to reproduce the evolution of the ccMRG wave and the formation of the twin TCs about two and five days in advance as well as their subsequent intensity evolution and movement within an 8-10 day period. Five additional 10-day sensitivity experiments with different model configurations are conducted to help understand the interaction of the three gyres. These experiments suggest the improved lead time in the control run may be attributed to the realistic simulation of the ccMRG wave with the following processes: (I) wave deepening associated with wave shortening and/or the intensification of individual gyres, (2) poleward movement of gyres that may be associated with bOlll1dary layer processes, (3) realistic simulation of moist processes at regional scales in association with each of the gyres, and (4) the vertical phasing of low- and mid-level cyclonic circulations associated with a specific gyre.

Shen, Bo-Wen↗
DOE OSTI2020

Rotational transition, domain formation, dislocations, and defects in vortex systems with combined sixfold and twelvefold anisotropic interactions

We introduce a phenomenological model for a pairwise repulsive interaction potential of vortices in a type-II superconductor, consisting of superimposed sixfold and twelvefold anisotropies. Using numerical simulations we study how the vortex lattice configuration varies as the magnitudes of the two anisotropic interaction terms change. A triangular lattice appears for all values, and rotates through 30 ° as the ratio of the sixfold and twlevefold anisotropy amplitudes is varied, in agreement with experimental results. The transition causes the vortex lattice to split into domains that have rotated clockwise or counterclockwise, with grain boundaries that are “decorated” by dislocations consisting of fivefold and sevenfold coordinated vortices. We also find intradomain dislocations and defects, and characterize them in terms of their energy cost. We discuss how this model could be generalized to other particle-based systems with anisotropic interactions, such as colloids, and consider the limit of very large anisotropy where it is possible to create cluster crystal states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1973

Effect of reaction control system jet-flow field interactions on a 0.015 scale model space shuttle orbiter aerodynamic characteristics

The effects of the reaction control system (RCS) jet-flow field interactions on the space shuttle orbiter system during entry are discussed. The primary objective of the test program was to obtain data for the shuttle orbiter configuration to determine control amplification factors resulting from jet interaction between the RCS plumes and the external flow over the vehicle. A secondary objective was to provide data for comparison and improvement of analytic jet interaction prediction techniques. The test program was divided into two phases; (1) force and moment measurements were made with and without RCS blowing, investigating environment parameters (R sub e, Alpha, Beta), RCS plume parameters (Jet pressure ratio, momentum ratio and thrust level), and geometry parameters (RCS pod locations) on the orbiter model, (2) oil flow visualization tests were conducted on a dummy balance at the end of the test.

Monta, W. J.↗
NASA NTRS2012

Genesis of Twin Tropical Cyclones as Revealed by a Global Mesoscale Model: The Role of Mixed Rossby Gravity Waves

In this study, it is proposed that twin tropical cyclones (TCs), Kesiny and 01A, in May 2002 formed in association with the scale interactions of three gyres that appeared as a convectively coupled mixed Rossby gravity (ccMRG) wave during an active phase of the Madden-Julian Oscillation (MJO). This is shown by analyzing observational data, including NCEP reanalysis data and METEOSAT 7 IR satellite imagery, and performing numerical simulations using a global mesoscale model. A 10-day control run is initialized at 0000 UTC 1 May 2002 with grid-scale condensation but no sub-grid cumulus parameterizations. The ccMRG wave was identified as encompassing two developing and one non-developing gyres, the first two of which intensified and evolved into the twin TCs. The control run is able to reproduce the evolution of the ccMRG wave and thus the formation of the twin TCs about two and five days in advance as well as their subsequent intensity evolution and movement within an 8-10 day period. Five additional 10-day sensitivity experiments with different model configurations are conducted to help understand the interaction of the three gyres, leading to the formation of the TCs. These experiments suggest the improved lead time in the control run may be attributed to the realistic simulation of the ccMRG wave with the following processes: (1) wave deepening (intensification) associated with a reduction in wavelength and/or the intensification of individual gyres, (2) poleward movement of gyres that may be associated with boundary layer processes, (3) realistic simulation of moist processes at regional scales in association with each of the gyres, and (4) the vertical phasing of low- and mid-level cyclonic circulations associated with a specific gyre.

forecast↗
DOE OSTI2018

Effects of Ho-ion substitution on the magnetic properties of the Ca3Co2O6 frustrated spin-chain compound

Highlights: • A great sensitivity of the Ca{sub 3}Co{sub 2}O{sub 6} magnetic behavior to the presence of magnetic foreign cation are emphasized. • As the Ho content increases the ferrimagnetic configuration becomes less stable; and the antiferromagnetic (AFM) interaction enhances gradually. • Antiferromagnetic coupling interaction between Ho{sup 3+} ions are interpreted, The complex micro-mechanism are discussed in detail. - Abstract: Ho{sup 3+}-ion doped spin-chain compounds Ca{sub 3}Co{sub 2-x}Ho{sub x}O{sub 6} (x = 0, 0.05, 0.1, 0.15) were prepared by a conventional solid-state reaction method. Rietveld refinement of the X-ray diffraction patterns at room temperature confirmed the rhombohedral structure with the R 3-bar c space group. The results reveal that the solid solubility of the Ho element in Ca{sub 3}Co{sub 2}O{sub 6} is in the range of x = 0.1–0.15. Magnetic measurement suggests that with the increased Ho content: (1) the ferromagnetic transition temperature Tc and spin freezing temperature T{sub ƒ} decrease obviously; (2) the ferrimagnetic configuration becomes less stable; (3) the dynamic characteristics become slower; and (4) the antiferromagnetic (AFM) interaction enhances gradually. Based on these phenomena, the mechanism was discussed in detail. The magnetic correlation length is broken at a low Ho{sup 3+}-ion level, and the Ho{sup 3+}-ion pair formation along the chain with a high level of doping was interpreted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗