Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONDENSATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Origin of spinel-rich chondrules and inclusions in carbonaceous and ordinary chondrites

The evaluation of three models of the origin of spinel-rich chondrules and inclusions presented here includes new calculations of the major-element refractory mineral condensation sequence from a gas of solar composition over a wide pressure interval. Condensation calculations show that spinel-rich chondrules did not crystallize from metastable liquid condensates, and that spinel-rich inclusions are not aggregates of refractory nebular condensates. It is proposed that spinel-rich objects are fractionated distillation residues of small aggregates of primitive dust that lost Ca, Si-rich partial melts by evaporation, ablation, or splashing during collisions. This model also explains why spinel-rich chondrules and inclusions (1) are usually smaller than melilite-rich chondrules and inclusions; (2) often have highly fractionated trace-element compositions; and (3) usually do not contain Pt-metal nuggets even when they are more enriched in the Pt-group metals than nugget-bearing melilite-rich objects.

Kornacki, A. S.↗
NASA NTRS1984

The problem of iron partition between Earth and Moon during simultaneous formation as a double planet system

A planetary model is described which requires fractional vapor/liquid condensation, planet accumulation during condensation, a late start for accumulation of the Moon, and volatile accretion to the surfaces of each planet only near the end of the accumulation process. In the model, initial accumulation of small objects is helped if the agglomerating particles are somewhat sticky. Assuming that growth proceeds through this range, agglomeration continues. If the reservoir of vapor is being preferentially depleted in iron by fractional condensation, an iron-rich planetary core forms. As the temperature decreases, condensing material becomes progressively richer in silicates and poorer in iron, forming the silicate-rich mantle of an already differentiated Earth. A second center of agglomeration successfully forms near the growing Earth after most of the iron in the reservoir has been used up. The bulk composition of the Moon then is similar to the outer mantle of the accumulating Earth.

Cassidy, W. A.↗
NASA NTRS1984

Heat pipe cooled probe

The basic heat pipe principle is employed to provide a self-contained passively cooled probe that may be placed into a high temperature environment. The probe consists of an evaporator region of a heat pipe and a sensing instrument. Heat is absorbed as the working fluid evaporates in the probe. The vapor is transported to the vapor space of the condenser region. Heat is dissipated from the condenser region and fins causing condensation of the working fluid, which returns to the probe by gravity and the capillary action of the wick. Working fluid, wick and condenser configurations and structure materials can be selected to maintain the probe within an acceptable temperature range.

Camarda, C. J.↗
NASA NTRS1985

Thermal management of high power space based systems

Conventional techniques of using a portion of the spacecraft skin for radiation of waste heat will be inadequate for high powered payloads (50 to 100 kWe) due to the lack of sufficient area. A Shuttle type system using a pumped single phase fluid loop could be scaled up to higher power but this type of system would require excessive pump power and weight. A pumped two-phase heat transfer loop has a much lower pumping requirement due to the higher latent heat of vaporization of the fluid in comparison to the sensible heat it can absorb through a temperature change. Concepts for an evaporator and a condenser for a pumped two-phase system are described. The condenser uses capillary grooves and a separate pumped condensate return line to achieve high heat transfer coefficients and stable operation due to the separation of the vapor and liquid flows. The cold plate evaporator uses wicks to contain the liquid and transport it to the heated surface. It can also function as a condenser for warming components. Control concepts for the cold plate are discussed. Concepts for deployment or erection of large space radiators are also considered.

Hwangbo, H.↗
NASA NTRS1988

Diurnal variations in optical depth at Mars: Observations and interpretations

Viking lander camera images of the Sun were used to compute atmospheric optical depth at two sites over a period of 1 to 1/3 martian years. The complete set of 1044 optical depth determinations is presented in graphical and tabular form. Error estimates are presented in detail. Optical depths in the morning (AM) are generally larger than in the afternoon (PM). The AM-PM differences are ascribed to condensation of water vapor into atmospheric ice aerosols at night and their evaporation in midday. A smoothed time series of these differences shows several seasonal peaks. These are simulated using a one-dimensional radiative convective model which predicts martial atmospheric temperature profiles. A calculation combining these profiles with water vapor measurements from the Mars Atmospheric Water Detector is used to predict when the diurnal variations of water condensation should occur. The model reproduces a majority of the observed peaks and shows the factors influencing the process. Diurnal variation of condensation is shown to peak when the latitude and season combine to warm the atmosphere to the optimum temperature, cool enough to condense vapor at night and warm enough to cause evaporation at midday.

Colburn, D. S.↗
NASA NTRS1988

Antarctic ozone depletion chemistry - Reactions of N2O5 with H2O and HCl on ice surfaces

In a study concerning Antarctic ozone depletion, reactions of dinitrogen pentoxide with water and hydrochloric acid were studied on ice surfaces in a Knudsen cell flow reactor. The N2O5 reacted on ice at 185 K to form condensed-phase nitric acid (HNO3). This reaction may provide a sink for odd nitrogen, NO(x), during the polar winter, a requirement in nearly all models of Antarctic ozone depletion. The reaction of N2O5 on HCl-ice surfaces at 185 K produced gaseous nitryl chloride (ClNO2) and condensed-phase HNO3 and proceeded until all of the HCl within the ice was depleted. The ClNO2 which did not react or condense on ice at 185 K, can be readily photolyzed in the Antarctic spring to form atomic chlorine for catalytic ozone destruction cycles. The other photolysis product, gaseous nitrogen dioxide may be important in the partitioning of NO(x) between gaseous and condensed phases in the Antarctic winter.

Tolbert, Margaret A.↗
NASA NTRS1988

Molten salt corrosion of SiC and Si3N4

Industrial systems such as heat engines and heat exchangers involve harsh environments. The structural materials are subjected to high temperatures as well as corrosive gases and condensed phases. Past experience with metal alloys has shown that these condensed phases can be particularly corrosive and are often the limiting factor in the operation of these systems. In a heat engine the most common condensed corrodent is Na2SO4 whereas in a heat exchanger an oxide slag may be present. The primary emphasis is on Na2SO4 induced corrosion, however, similarities and differences to oxide slag are also discussed. The extensive research on corrosion of metal alloys has led to understanding and controlling corrosion for these materials. Currently silicon based ceramics are prime candidates for the applications discussed. Therefore it is important to understand the effects of condensed phase deposits on this emerging class of high temperature materials. Both the thermodynamic and strength of the ceramic is also examined. Finally some control strategies for corrosion of silicon based ceramics are explored.

Jacobson, Nathan S.↗
NASA NTRS1989

Diurnal variations in optical depth at Mars

Viking lander camera images of the Sun were used to compute atmospheric optical depth at two sites over a period of 1 to 1/3 martian years. The complete set of 1044 optical depth determinations is presented in graphical and tabular form. Error estimates are presented in detail. Otpical depths in the morning (AM) are generally larger than in the afternoon (PM). The AM-PM differences are ascribed to condensation of water vapor into atmospheric ice aerosols at night and their evaporation in midday. A smoothed time series of these differences shows several seasonal peaks. These are simulated using a one-dimensional radiative convective model which predicts martial atmospheric temperature profiles. A calculation combinig these profiles with water vapor measurements from the Mars Atmospheric Water Detector is used to predict when the diurnal variations of water condensation should occur. The model reproduces a majority of the observed peaks and shows the factors influencing the process. Diurnal variation of condensation is shown to peak when the latitude and season combine to warm the atmosphere to the optimum temperature, cool enough to condense vapor at night and warm enough to cause evaporation at midday.

Colburn, D. S.↗
NASA NTRS1989

Thermal synthesis and hydrolysis of polyglyceric acid

Polyglyceric acid was synthesized by thermal condensation of glyceric acid at 80 C in the presence and absence of two mole percent of sulfuric acid catalyst. The acid catalyst accelerated the polymerization over 100-fold and made possible the synthesis of insoluble polymers of both L- and DL-glyceric acid by heating for less than 1 day. Racemization of L-glyceric acid yielded less than 1 percent D-glyceric acid in condensations carried out at 80 C with catalyst for 1 day and without catalyst for 12 days. The condensation of L-glyceric acid yielded an insoluble polymer much more readily than condensation of DL-glyceric acid. Studies of the hydrolysis of poly-DL-glyceric acid revealed that it was considerably more stable under mild acidic conditions compared to neutral pH. The relationship of this study to the origin of life is discussed.

Weber, Arthur L.↗
NASA NTRS1989

Photochemistry of the atmosphere of Uranus

A detailed one-dimensional photochemical model incorporating vertical transport by eddy and molecular diffusion is used to study the importance of chemical and physical processes that control the hydrocarbon abundances in the stratosphere of Uranus. The study includes updated photochemical reaction rates and photolysis branching ratios; explicit calculation of the condensation rate of condensing species; and appropriate boundary conditions at the tropopause. It is found that the basic photochemical process generally produces low net conversion efficiencies of methane to higher hydrocarbons. However, even with these low efficiencies, the total condensation rate, which represents the net rate of conversion of methane to hydrocarbons, is roughly 2 x 10 to the -16th g/cm sec, in agreement with the upper range of the low condensation rate for the production of the stratospheric aerosol layer as determined by Pollack et al. (1987). Furthermore, a range of vertical transport rates is required to separately match the observational constraints on hydrocarbon abundances. The solar reflection data refer to the sunlit polar region of Uranus and require an eddy diffusion coefficient of K approx. = 50 sq cm/sec for globally averaged insolation or K approx = 1500 (Nh/N) exp 1/2 for overhead sun. The Voyager 2 Utraviolet Spectrometer solar occultation data refer to the equatorial regions, thus implying a large latitudinal gradient in stratospheric hydrocarbon abundance.

Summers, Michael E.↗
NASA NTRS1989

Infrared spectra of crystalline and glassy silicates and application to interstellar dust

The infrared spectra of crystalline minerals predicted in theoretical condensation sequences do not match the astronomical observations. Since the astronomical spectra are a closer match to glassy silicates, the authors undertook a study to measure the infrared spectra of glassy silicates that have compositions similar to silicate minerals predicted in theoretical condensation sequences. The data should support observations aimed at elucidating condensation chemistry in dust forming regions. The authors measured the mass absorption coefficients, from 2.5 to 25 microns, of ground samples of olivine, diopside, and serpentine and also smoke samples that were prepared from these minerals. The smoke samples prepared in this way are predominantly glassy with nearly the same composition as the parent minerals. The crystalline samples consisted of pure olivine ((Fe(0.1)Mg(0.9))(2)SiO(4)), serpentine, diopside. Sample purity was confirmed by x ray diffraction. Each mineral was ground for 10 hours and a measured mass of the powder was mixed with KBr powder for absorption measurements using the method of Borghesi et a. (1985). The smoke samples were prepared from the same samples used for grinding by vaporizing the minerals using pulsed laser radiation in air. The smoke samples formed by condensation of the resulting vapor. The smoke settled onto infrared transparent KRS-5 substrates and onto a quartz crystal microbalance used to obtain mass measurements. A description of the preparation method is given in Stephens (1980). The glassy diopside showed only diffuse electron diffraction peaks and hence was nearly amorphous, while the serpentine smoke showed a weak diffraction pattern corresponding to MgO. The smoke from olivine showed a weak diffraction pattern corresponding to Fe2O3 and/or Fe3O4. The mass absorption coefficients, from 2.5 to 25 microns, of crystalline diopside, olivine, and serpentine and their corresponding smoke samples are shown in figures.

Stephens, John R.↗
NASA NTRS1991

Prebiotic chemistry in clouds

The chemical evolution hypothesis of Woese (1979), according to which prebiotic reactions occurred rapidly in droplets in giant atmospheric reflux columns was criticized by Scherer (1985). This paper proposes a mechanism for prebiotic chemistry in clouds that answers Scherer's concerns and supports Woese's hypothesis. According to this mechanism, rapid prebiotic chemical evolution was facilitated on the primordial earth by cycles of condensation and evaporation of cloud drops containing clay condensation nuclei and nonvolatile monomers. For example, amino acids supplied by, or synthesized during entry of meteorites, comets, and interplanetary dust, would have been scavenged by cloud drops containing clay condensation nuclei and would be polymerized within cloud systems during cycles of condensation, freezing, melting, and evaporation of cloud drops.

Oberbeck, Verne R.↗
NASA NTRS1991

Thermal infrared properties of Titan's stratospheric aerosol

The monotonic increase with wavenumber of stratospheric IR opacities in the north polar neighborhood of Titan, in the 250-600/cm bandpass, becomes more extreme with decreasing altitude, consistent with an opacity that is primarily dependent on a high altitude photochemical aerosol, on the one hand, but which is moderated by condensed organics at lower altitudes. Because condensates exhibit a wavenumber dependence for opacity which is the opposite of that required, it is suggested that condensed nitriles may be prominent; either of these condensates may be acceptable for sufficiently large particles. While comparisons with low-latitude data indicate no clear dependence of vertically-integrated opacity on latitude above 80 km, indications of a particle size and/or composition gradient with latitude in the lower stratosphere are noted.

Samuelson, Robert E.↗
NASA NTRS1991

A numerical simulation of magnetic reconnection and radiative cooling in line-tied current sheets

Radiative MHD equations are used for an optically thin plasma to carry out a numerical experiment related to the formation of 'postflare' loops. The numerical experiment starts with a current sheet that is in mechanical and thermal equilibrium but is unstable to both tearing-mode and thermal-condensation instabilities. The current sheet is line-tied at one end to a photospheric-like boundary and evolves asymmetrically. The effects of thermal conduction, resistivity variation, and gravity are ignored. In general, reconnection in the nonlinear stage of the tearing-mode instability can strongly affect the onset of condensations unless the radiative-cooling time scale is much smaller than the tearing-mode time scale. When the ambient plasma is less than 0.2, the reconnection enters a regime where the outflow from the reconnection region is supermagnetosonic with respect to the fast-mode wave speed. In the supermagnetosonic regime the most rapidly condensing regions occur downstream of a fast-mode shock that forms where the outflow impinges on closed loops attached to the photospheric-like boundary. A similar shock-induced condensation might occur during the formation of 'postflare' loops.

Forbes, T. G.↗
NASA NTRS1992

Electrode performance parameters for a radioisotope-powered AMTEC for space power applications

The alkali metal thermoelastic converter (AMTEC) is a device for the direct conversion of heat to electricity. Recently a design of an AMTEC using a radioisotope heat source was described, but the optimum condenser temperature was hotter than the temperatures used in the laboratory to develop the electrode performance model. Now laboratory experiments have confirmed the dependence of two model parameters over a broader range of condenser and electrode temperatures for two candidate electrode compositions. One parameter, the electrochemical exchange current density at the reaction interface, is independent of the condenser temperature, and depends only upon the collision rate of sodium at the reaction zone. The second parameter, a morphological parameter, which measures the mass transport resistance through the electrode, is independent of condenser and electrode temperatures for molybdenum electrodes. For rhodium-tungsten electrodes, however, this parameter increases for decreasing electrode temperature, indicating an activated mass transport mechanism such as surface diffusion.

Underwood, M. L.↗
NASA NTRS1992

STARDUST: A simulation experiment of cosmic dust analogues production in microgravity conditions

The aim, activity, and some preliminary results of the STARDUST program are presented. The condensation of solid materials from the vapor phase is important in several scientific fields such as chemical vapor deposition, air pollution, and the formation of refractory cosmic dust around stars. Conventional studies of refractory grain formation, using high temperature furnace and shock tube techniques, are restricted to short time scales and suffer from buoyancy induced convection that limit their accuracy. In order to simulate more accurately the condensation of refractory grains near stars and to investigate the advantages of performing condensation studies in microgravity conditions, an experimental investigation of vapor phase condensation in microgravity was undertaken. The experimental equipment currently used is reported. The results from the first flight series and particle aggregation modeling efforts are presented.

Ferguson, Frank↗
NASA NTRS1993

An observational search for CO2 ice clouds on Mars

CO2 ice clouds were first directly identified on Mars by the Mariner 6 and 7 infrared spectrometer limb scans. These observations provided support for early theoretical modeling efforts of CO2 condensation. Mariner 9 IRIS temperature profiles of north polar hood clouds were interpreted as indicating that these clouds were composed of H2O ice at lower latitudes and CO2 ice at higher latitudes. The role of CO2 condensation on Mars has recently received increased attention because (1) Kasting's model results indicated that CO2 cloud condensation limits the magnitude of the proposed early Mars CO2/H2O greenhouse, and (2) Pollack el al.'s GCM results indicated that the formation of CO2 ice clouds is favorable at all polar latitudes during the fall and winter seasons. These latter authors have shown that CO2 clouds play an important role in the polar energy balance, as the amount of CO2 contained in the polar caps is constrained by a balance between latent heat release, heat advected from lower latitudes, and thermal emission to space. The polar hood clouds reduce the amount of CO2 condensation on the polar caps because they reduce the net emission to space. There have been many extensive laboratory spectroscopic studies of H2O and CO2 ices and frosts. In this study, we use results from these and other sources to search for the occurrence of diagnostic CO2 (and H2O) ice and/or frost absorption features in ground based near-infrared imaging spectroscopic data of Mars. Our primary goals are (1) to try to confirm the previous direct observations of CO2 clouds on Mars; (2) to determine the spatial extent, temporal variability, and composition (H2O/CO2 ratio) of any clouds detected; and (3) through radiative transfer modeling, to try to determine the mean particle size and optical depth of polar hood clouds, thus, assessing their role in the polar heat budget.

Bell, James F., III↗
NASA NTRS1993

Isotopic and trace element characteristics of an unusual refractory inclusion from Essebi

The isotopic and chemical properties of Ca-Al-rich inclusions (CAI) provide important clues to the early solar nebula environment. While the abundances of refractory major and trace elements are similar to those expected for high temperature condensates, the variety of textural, chemical, and isotopic signatures indicate most CAI experienced complex, multi-stage histories involving repeated episodes of condensation, evaporation, and metamorphism. Evidence of multiple processes is especially apparent in an unusual refractory inclusion from Essebi (URIE) described by El Goresy et al. The melilite (mel)-rich core of URIE contains polygonal framboids of spinel (sp) and hibonite (hb) or sp and fassaite (fas) and is surrounded by a rim sequence consisting of five layers. In contrast to rims on Allende, the mineralogy of the URIE rim layers becomes increasingly refractory from the core outwards, ending in a layer of spinel-Al2O3 solid solution + Sc-rich fassaite. The chemical and mineralogical features of URIE are inconsistent with crystallization from a homogeneous melt, and El Goresy et al. proposed a multi-step history involving condensation of sp + hb and aggregation into framboids, capture of framboids by a refractory silicate melt droplet, condensation of rim layers, and alteration of mel to calcite and feldspathoid. The PANURGE ion probe was used to investigate the isotopic and trace element characteristics of URIE to develop a more complete picture of the multiple processes leading to formation and metamorphism.

Deloule, E.↗