Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstract”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

K{sub 3}YB{sub 6}O{sub 12}: A new nonlinear optical crystal with a short UV cutoff edge

Graphical abstract: Display Omitted Highlights: ► A new non-centrosymmetric borate, K{sub 3}YB{sub 6}O{sub 12}, has been synthesized. ► A K{sub 3}YB{sub 6}O{sub 12} crystal with dimensions of ∼40 mm × 30 mm × 10 mm was successfully grown. ► K{sub 3}YB{sub 6}O{sub 12} exhibits a short UV cutoff edge at 195 nm. ► Powder SHG effect of K{sub 3}YB{sub 6}O{sub 12} is weaker than that of KH{sub 2}PO{sub 4} (KDP). -- Abstract: A new non-centrosymmetric borate, K{sub 3}YB{sub 6}O{sub 12}, has been synthesized by solid state reaction techniques, and a K{sub 3}YB{sub 6}O{sub 12} crystal with dimensions of ∼40 mm × 30 mm × 10 mm was successfully grown by the top-seeded solution growth method using a K{sub 2}O–B{sub 2}O{sub 3}–KBF{sub 4} flux. K{sub 3}YB{sub 6}O{sub 12} crystallizes in the trigonal space group R32 with cell parameters of a = 13.2202(19) Å, c = 30.281(6) Å, and Z = 15. In the structure of K{sub 3}YB{sub 6}O{sub 12}, B{sub 5}O{sub 10} groups are bridged by Y{sub 3}O{sub 12} chains and discrete YO{sub 6} octahedra via corner-sharing, constructing columns packed side by side in a hexagonal motif along the c-axis to form a three-dimensional framework. The three-dimensional framework affords one-dimensional tunnels of 8-membered rings along the b-axis which are occupied by K atoms. K{sub 3}YB{sub 6}O{sub 12} melts incongruently at 941 °C, and exhibits a short UV cutoff edge at 195 nm. The second harmonic generation effect of K{sub 3}YB{sub 6}O{sub 12} is weaker than that of KH{sub 2}PO{sub 4}.

36 MATERIALS SCIENCE↗

Hierarchical hollow microsphere and flower-like indium oxide: Controllable synthesis and application as H{sub 2}S cataluminescence sensing materials

Graphical abstract: Hierarchical hollow microsphere and flower-like In{sub 2}O{sub 3} were controllable fabricated through a novel and simple hydrothermal process, and the former showed superior cataluminescence sensing performance to H{sub 2}S. Highlights: ► In{sub 2}O{sub 3} hierarchical hollow sphere were prepared via a hydrothermal route. ► The growth process of In{sub 2}O{sub 3} hierarchical hollow sphere has been investigated. ► The sensor based on prepared In{sub 2}O{sub 3} shows good sensing performance to H{sub 2}S. -- Abstract: In the present work, In{sub 2}O{sub 3} hierarchical hollow microsphere and flower-like microstructure were achieved controllably by a hydrothermal process in the sodium dodecyl sulfate (SDS)-N,N-dimethyl-formamide (DMF) system. XRD, SEM, HRTEM and N{sub 2} adsorption measurements were used to characterize the as-prepared indium oxide materials and the possible mechanism for the microstructures formation was briefly discussed. The cataluminescence gas sensor based on the as-prepared In{sub 2}O{sub 3} was utilized to detect H{sub 2}S concentrations in flowing air. Comparative gas sensing results revealed that the sensor based on hierarchical hollow microsphere exhibited much higher sensing sensitivity in detecting H{sub 2}S gas than the sensor based on flower-like microstructure. The present gas sensor had a fast response time of 5 s and a recovery time of less than 25 s, furthermore, the cataluminescence intensity vs. H{sub 2}S concentration was linear in range of 2–20 μg mL{sup −1} with a detection limit of 0.5 μg mL{sup −1}. The present highly sensitive, fast-responding, and low-cost In{sub 2}O{sub 3}-based gas sensor for H{sub 2}S would have many practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nb{sub 2}O{sub 5} hollow nanospheres as anode material for enhanced performance in lithium ion batteries

Graphical abstract: Nb{sub 2}O{sub 5} hollow nanosphere constructed electrode delivers high capacity of 172 mAh g{sup −1} after 250 cycles and maintains structural integrity and excellent cycling stability. Highlights: ► Nb{sub 2}O{sub 5} hollow nanospheres synthesis was synthesized by soft-template. ► Nb{sub 2}O{sub 5} hollow nanospheres were investigated as anode material in Li-ion battery. ► Nanostructured electrode delivers high capacity of 172 mAh g{sup −1} after 250 cycles. ► The electrode maintains the structural integrity and excellent cycling stability. ► Nanosized shell domain facilitates fast lithium intercalation/deintercalation. -- Abstract: Nb{sub 2}O{sub 5} hollow nanospheres of average diameter ca. ∼29 nm and hollow cavity size ca. 17 nm were synthesized using polymeric micelles with core–shell–corona architecture under mild conditions. The hollow particles were thoroughly characterized by transmission electron microscope (TEM), X-ray diffraction (XRD), infrared spectroscopy (FTIR), thermal (TG/DTA) and nitrogen adsorption analyses. Thus obtained Nb{sub 2}O{sub 5} hollow nanospheres were investigated as anode materials for lithium ion rechargeable batteries for the first time. The nanostructured electrode delivers high capacity of 172 mAh g{sup −1} after 250 cycles of charge/discharge at a rate of 0.5 C. More importantly, the hollow particles based electrodes maintains the structural integrity and excellent cycling stability even after exposing to high current density 6.25 A g{sup −1}. The enhanced electrochemical behavior is ascribed to hollow cavity coupled with nanosized Nb{sub 2}O{sub 5} shell domain that facilitates fast lithium intercalation/deintercalation kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shape-controlled synthesis and properties of dandelion-like manganese sulfide hollow spheres

Graphical abstract: Dandelion-like MnS hollow spheres assembled with nanorods could be successfully synthesized in large quantities through a simple and convenient hydrothermal synthetic method under mild conditions using soluble hydrated manganese chloride as Mn source, L-cysteine as both a precipitator and complexing reagent. The dandelion-like MnS hollow spheres might have potential applications in microdevices and magnetic cells. Highlights: ► MnS hollow spheres assembled with nanorods could be synthesized. ► The morphologies and sizes of final products could be controlled. ► Possible formation mechanism of MnS hollow spheres is proposed. -- Abstract: Dandelion-like gamma-manganese (II) sulfide (MnS) hollow spheres assembled with nanorods have been prepared via a hydrothermal process in the presence of L-cysteine and polyvinylpyrrolidone (PVP). L-cysteine was employed as not only sulfur source, but also coordinating reagent for the synthesis of dandelion-like MnS hollow spheres. The morphology, structure and properties of as-prepared products have been investigated in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), selected area electron diffraction (SAED), high-resolution transmission electron microscopy (HRTEM) and photoluminescence spectra (PL). The probable formation mechanism of as-prepared MnS hollow spheres was discussed on the basis of the experimental results. This strategy may provide an effective method for the fabrication of other metal sulfides hollow spheres.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel organic–inorganic hybrid with Anderson type polyanions as building blocks: (C{sub 6}H{sub 10}N{sub 3}O{sub 2}){sub 2}Na(H{sub 2}O){sub 2}[Al(OH){sub 6}Mo{sub 6}O{sub 18}]·6H{sub 2}O

Graphical abstract: Display Omitted Highlights: ► Synthesis of a novel inorganic–organic hybrid compound based on Anderson polyoxomolybdates. ► Characterization by X-ray diffraction, IR and UV–Vis spectroscopies of the new compound. ► Potential applications in catalysis, biochemical analysis and electrical conductivity of the organic–inorganic compound. -- Abstract: A new organic–inorganic hybrid compound based on Anderson polyoxomolybdates, (C{sub 6}H{sub 10}N{sub 3}O{sub 2}){sub 2}Na(H{sub 2}O){sub 2}[Al(OH){sub 6}Mo{sub 6}O{sub 18}]·6H{sub 2}O (1) have been isolated by the conventional solution method and characterized by single-crystal X-ray diffraction, infrared, ultraviolet spectroscopy and Thermogravimetric Analysis (TGA). This compound crystallized in the triclinic system, space group P−1, with a = 94.635(1) Å, b = 10.958(1) Å, c = 11.602(1) Å, α = 67.525(1)°, β = 71.049(1)°, γ = 70.124(1)° and Z = 1. The crystal structures of the compounds exhibit three-dimensional supramolecular assembly based on the extensive hydrogen bonding interactions between organic cations, sodium cations, water molecules and Anderson polyoxoanions. The infrared spectrum fully confirms the X-ray crystal structure and the UV spectrum of the title compound exhibits an absorption peak at 210 nm.

36 MATERIALS SCIENCE↗

Tunneling behavior in ion-assist ion-beam sputtered CoFe/MgO/NiFe magnetic tunnel junctions

Graphical abstract: Display Omitted Highlights: ► Dual ion beam sputtered MgO barrier for MTJs. ► ∼12% TMR at 60 K. ► Glazman and Matveev model fitted for quantification of elastic and inelastic tunneling conductance through barrier. -- Abstract: Magnetic tunnel junctions (MTJs) consisting of CoFe and NiFe as ferromagnetic electrodes and MgO as insulating barrier fabricated through in situ shadow masking employing ion beam sputtering are studied for their tunneling magnetoresistance (TMR) and temperature dependence of the tunneling conductance behavior. The tunneling characteristics of these MTJs exhibited barrier height of 0.7 eV and width of 3.3 nm. These MTJs possessed ∼12% TMR at 60 K. The temperature dependence of conductance behavior of these junctions have revealed finite contributions from inelastic tunneling through the barrier via hopping conduction via present localized states which arise due to the presence of ionic interstitial defects in the MgO oxide barrier. The fitting of the data reveals that thirteenth order of hopping conduction is operative through MgO barrier.

36 MATERIALS SCIENCE↗

Role of WO{sub 3} on DC conductivity and some optical properties of TeO{sub 2} based glasses

Graphical abstract: Display Omitted Highlights: ► TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system was prepared using melt quenching method. ► DC conductivity, FESEM, EDS and optical absorption studies were carried out. ► Non bridging oxygens (NBOs) are increases with increase of WO{sub 3} content. ► Increase in NBOs is responsible for the increase in the refractive index of glasses. ► Two charge transport mechanisms are coexist in these glasses. -- Abstract: DC electrical conductivity and optical absorption studies have been employed to understand the influence of WO{sub 3} content on the electrical and optical properties of the TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system. Field emission scanning electron microscope (FESEM), Energy dispersive X-ray spectrometry (EDS) measurements have been used to confirm the glassy nature and the elemental analysis of the glass composition, respectively. DC electrical conductivity of the glasses was studied in the temperature range 423–613 K. From Arrhenius plot, the activation energies (E{sub act}) of all the glasses have been calculated and conduction mechanism has been discussed in terms of structural changes occurred with the addition of WO{sub 3} content. The optical properties such as optical band gap (E{sub opt}), Urbach energy (ΔE), molar refraction (R{sub M}), metallization criterion (M), electronic polarizability of the oxide ion (α{sub O{sup 2}{sup −}}) and refractive index (n) have been determined from optical absorption data and were found to be composition dependent.

36 MATERIALS SCIENCE↗

Determination of thermal and electronic carrier transport properties of SnS thinfilms using photothermal beam deflection technique

Graphical abstract: Display Omitted Highlights: ► Determination of carrier transport properties of SnS thin films non-destructively. ► SnS thin films were deposited by chemical spray pyrolysis technique. ► Photothermal beam deflection technique is used for film analysis. ► Optimization of film deposition parameters. ► Photothermal imaging of SnS films. -- Abstract: Photothermal beam deflection technique is an efficient tool for non-destructive evaluation of thin films. Thin films of tin mono sulphide, which find application as absorber layer in photovoltaic cells, were deposited by chemical spray pyrolysis technique and their carrier transport properties were determined using photothermal beam deflection technique. Thermal diffusivity, minority carrier lifetime, mobility and surface recombination velocity of these films fabricated under different spray conditions like varying spray rate, Sn/S ratio and substrate temperature were determined. Photothermal beam deflection technique was also employed for constructing the thermal images of these films to evaluate the film uniformity.

36 MATERIALS SCIENCE↗

Effect of solvents on morphology and photocatalytic activity of BiOBr synthesized by solvothermal method

Graphical abstract: Display Omitted Highlight: ► BiOBr photocatalysts with various morphologies were synthesized. ► The choice of organic solvents was first extended to glycerol. ► Morphologies are greatly dependant on the solvent used. ► GR-mediated BiOBr has the highest photocatalytic activity. -- Abstract: BiOBr photocatalysts with various morphologies have been synthesized via a solvothermal method in ethanol-, ethylene glycol (EG)- and glycerol (GR)-mediated conditions, respectively. The effects of different solvents on the size and morphology of BiOBr crystal are investigated in detail. Viscosity of the solvents is believed to be a key factor in determining morphology of BiOBr crystal, which leads to the different formation mechanisms. In addition, it is found that the photocatalytic activities of BiOBr samples for the degradation of methyl orange (MO) under visible light irradiation are dependent on the solvent used in the synthesis. The differences in the photocatalytic activities are mainly attributed to the different morphologies, which further results in the difference in Brunauer–Emmett–Teller (BET) surface areas, bandgaps, the exposed crystal facets and porous structures.

36 MATERIALS SCIENCE↗

Low temperature solid-state synthesis of nanocrystalline gallium nitride

Graphical abstract: Display Omitted Highlights: ► GaN nanocrystalline was prepared via a solid-state reacion at relatively low temperature. ► The sizes and crystallinities of the GaN samples obtained at the different temperatures are investigated. ► The GaN sample has oxidation resistance and good thermal stability below 1000 °C. -- Abstract: Nanocrystalline gallium nitride was synthesized by a solid-state reaction of metallic magnesium powder, gallium sesquioxide and sodium amide in a stainless steel autoclave at a relatively low temperature (400–550 °C). The structures and morphologies of the obtained products were derived from X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). XRD patterns indicated that the products were hexagonal GaN (JCPDS card no. 76-0703). The influence of reaction temperature on size of the products was studied by XRD and TEM. Furthermore, the thermal stability and oxidation resistance of the nanocrystalline GaN were also investigated. It had good thermal stability and oxidation resistance below 800 °C in air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The photoluminescence properties of Er{sup 3+}-doped ZrO{sub 2} nanotube arrays prepared by anodization

Graphical abstract: Display Omitted Highlights: ► Er{sup 3+}-doped ZrO{sub 2} nanotube arrays were prepared by anodization of Zr–Er alloy. ► Small tetragonal zirconia crystallites are tended to be formed due to the doping of Er{sup 3+}. ► Under excitation at 317 nm, the ZrO{sub 2} nantube arrays have strongest photoluminescence intensity. -- Abstract: Er{sup 3+}-doped ZrO{sub 2} nanotube arrays were prepared by anodization of Zr–Er alloy which was obtained by melting zirconium with 1.0 wt% erbium. The morphology, structure and photoluminescence properties were studied through scanning electron microscope, transmission electron microscope, X-ray diffraction and photoluminescence analyzer. X-ray diffraction results indicate that doping of Er{sup 3+} affects the crystal structure and grain size obviously and the Er{sup 3+}-doped samples tend to form small tetragonal grains. Photoluminescence analyses show that when Er{sup 3+}-doped zirconia nanotube arrays are excited at 317 nm, there are two strong photoluminescence emission peaks at 373 nm and 415 nm. When the excitation wavelength is 257 nm, a photoluminescence emission peak appears at 363 nm. Under same measurement conditions, emission peaks of the undoped ZrO{sub 2} nanotube arrays are very weak.

36 MATERIALS SCIENCE↗

Characterization, properties and catalytic application of TiO{sub 2} nanotubes prepared by ultrasonic-assisted sol-hydrothermal method

Graphical abstract: A novel class of titania nanotubes (TNTs) have been prepared by ultrasonic assisted sol-hydrothermal method using tetrabutyl titanate and ethanol as the precursors. The physicochemical characteristics of the catalysts were investigated by transmission electron microscopy, X-ray diffraction, Brunauer–Emmett–Teller method, Differential Scanning Calorimeters-Thermogravimetric Analysis (DSC–TG) and UV–vis absorption spectra. The photocatalytic activity of the products was evaluated in terms of reactive brilliant red X-3B in an aqueous solution under UV irradiation for 1 h. The results showed that the catalyst revealed an excellent photocatalytic activity. The degradation rate of reactive brilliant X-3B could be up to 96%. Display Omitted Highlights: ► TiO{sub 2} nanotubes were prepared by ultrasonic-assisted sol-hydrothermal method. ► TEM, HRTEM, XRD, and BET were used to study morphology and crystalline structure. ► FTIR, DSC-TG was used to investigate pyrolytic process and phase structure. ► UV–vis absorption spectra were used to evaluate the photocatalysis of catalysts. ► Dye degradation result showed that the catalyst had excellent photocatalytic activity. -- Abstract: A novel class of titania nanotubes (TNTs) have been prepared by ultrasonic assisted sol-hydrothermal method using tetrabutyl titanate and ethanol as the precursors. The physicochemical characteristics of the catalysts were investigated by transmission electron microscopy (TEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) method, Differential Scanning Calorimeters-Thermogravimetric Analysis (DSC-TG) and UV–vis absorption spectra. The photocatalytic activity of the products was evaluated in terms of reactive brilliant red X-3B in an aqueous solution under UV irradiation for 1 h. The results showed that the anatase nanotubes prepared by ultrasonic assisted sol-hydrothermal method exhibited excellent photocatalytic activity. The degradation rate of reactive brilliant X-3B could be up to 96%. The high degradation rate was attributed to the good crystalline pure-phase structure of nanotubes caused by ultrasound. Furthermore, the large surface areas also played an important role in the high degradation rate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The role of adsorption in decomposition of dyes on TiO{sub 2} and N-modified TiO{sub 2} photocatalysts under UV and visible light irradiations

Graphical abstract: Influence of pH and zeta potential of TiO{sub 2} based photocatalysts on the adsorption and degradation of MB under UV irradiation. Highlights: ► Adsorption of dyes on TiO{sub 2}/N accelerated their decomposition under visible light. ► pH of solution and the PZC of the TiO{sub 2} surface influence the adsorption of dyes. ► Under UV irradiation oxidation of pollutants with OH radicals is the most powerful. -- Abstract: Photoactivities of TiO{sub 2} based photocatalysts towards dyes decomposition was studied by consider their adsorption abilities. It was proved that zeta potential and PZC (point zero charge) of photocatalyst surface as well as pH of solution strongly influenced adsorption of tested dyes, Methylene Blue (MB) and Reactive Red 198 (RR198). These dyes underwent the photocatalytic decomposition by two ways, OH radicals attack and direct oxidation with photogenerated holes. The latter one is more efficient in case of better contact of pollutant with the photocatalysts surface and is dominant under visible light irradiation, where insignificant amount of OH radicals is formed. The former one is powerful under UV irradiation and is a key factor in decomposition of dyes regardless of their adsorption abilities.

36 MATERIALS SCIENCE↗

Preparation and nonlinear optical properties of indium nanocrystals in sodium borosilicate glass by the sol–gel route

Graphical abstract: The sodium borosilicate glass doped with indium nanocrystals have been successfully prepared by sol–gel methods. And the indium nanocrystals in tetragonal crystal system have formed uniformly in the glass, and the average diameter of indium nanocrystals is about 30 nm. The third-order optical nonlinear refractive index γ, absorption coefficient β, and susceptibility χ{sup (3)} of the glass are determined to be −4.77 × 10{sup −16} m{sup 2}/W, 2.67 × 10{sup −9} m/W, and 2.81 × 10{sup −10} esu, respectively. Highlights: ► Indium nanocrystals embedded in glass matrix have been prepared by sol–gel route. ► The crystal structure and composition are investigated by XRD and XPS. ► Size and distribution of indium nanocrystals is determined by TEM. ► The third-order optical nonlinearity is investigated by using Z-scan technique. -- Abstract: The sodium borosilicate glass doped with indium nanocrystals have been successfully prepared by sol–gel route. The thermal stability behavior of the stiff gel is investigated by thermogravimetric (TG) and differential thermal (DTA) analysis. The crystal structure of the glass is characterized by X-ray powder diffraction (XRD). Particle composition is determined by X-ray photoelectron spectroscopy (XPS). Size and distribution of the nanocrystals are characterized by transmission electron microscopy (TEM) as well as high-resolution transmission electron microscopy (HRTEM). Results show that the indium nanocrystals in tetragonal crystal structure have formed in glass, and the average diameter is about 30 nm. Further, the glass is measured by Z-scan technique to investigate the nonlinear optical (NLO) properties. The third-order NLO coefficient χ{sup (3)} of the glass is determined to be 2.81 × 10{sup −10} esu. The glass with large third-order NLO coefficient is promising materials for applications in optical devices.

36 MATERIALS SCIENCE↗

Preparation of Mg/Al-LDHs intercalated with dodecanoic acid and investigation of its antiwear ability

Graphical abstract: Comparable studies of nano Mg/Al-LDHs powder on the anti-wear properties of lubricating oil were carried out on four-ball and gear testing machine. Mg/Al-NO{sub 3}{sup −}-LDHs and Mg/Al-DA-LDHs powder in base oil possess an excellent friction-reducing property, with a friction coefficient at 23.9% and 22.2% which are lower than that of the base oil Highlights: ► We synthesized nano Mg/Al-NO{sub 3}{sup −}(DA)-LDHs via coprecipitation and anion exchange. ► The optimal exchanging condition is as follows: water dispersion and pH value of 5. ► The tribological properties of LDHs were studied on four-ball and gear machine. ► We reported nano LHDs as anti-wear materials in lubricates for the first time. ► The greatest decline in friction coefficient of lubricates with LDHs is up to 23.9%. -- Abstract: Layered double hydroxides (LDHs) intercalated with dodecanoic acid have been prepared by anion exchange with Mg/Al-NO{sub 3}{sup −}-LDHs as the precursor under acid condition with water and ethanol as the dispersion medium. The obtained materials were characterized by X-ray diffraction (XRD), thermogravimetric and differential thermal analyser (TG–DTA), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and BET. Patterns of XRD and FTIR show that interlayer nitrate ions have substituted with dodecanoic acid and the gallery height has increased from 0.88 nm to 1.99 nm. The interlayer distance of the intercalated materials increases with the increase of pH value due to the different arrangement of interlayer anions. The tribological performance of LDHs precursor and intercalated LDHs in base oil were studied for the first time by using four-ball wear machine and gear testing machine. Experimental results show that the LDHs precursor and intercalated LDHs powder are excellent in friction-reducing, with decreases in friction coefficient by 23.9% and 22.2% respectively comparing with base oil.

36 MATERIALS SCIENCE↗

Facile synthesis, spectral properties and formation mechanism of sulfur nanorods in PEG-200

Graphical abstract: Homogeneous rod-like structure of sulfur with a typical diameter of about 80 nm and an average aspect ratio of about 6–8 was obtained. The sulfur nanoparticles could self-assemble from spherical particles to nanorods in PEG-200. During the self-assembling process, the absorption band showed a red shift which was due to the production of nanorods. Highlights: ► A novel, facile and greener method to synthesize sulfur nanorods by the solubilizing and templating effect of PEG-200 was reported. ► S{sup 0} nanoparticles could self assemble in PEG-200 and finally form monodisperse and homogeneous rod-like structure with an average diameter of about 80 nm, the length ca. 600 nm. ► The absorption band showed a red shift and the RRS intensity enhanced continuously during the self-assembling process. ► PEG-200 induced the oriented attachment of sulfur nanoparticles by the terminal hydroxyl groups. -- Abstract: The synthesis of nano-sulfur sol by dissolving sublimed sulfur in a green solvent-PEG-200 was studied. Homogeneous rod-like structure of sulfur with a typical diameter of about 80 nm and an average aspect ratio of 6–8 was obtained. The structure, morphology, size, and stability of the products were investigated by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering (DLS) measurements. The spectral properties of the products were investigated by ultraviolet-visible (UV–vis) absorption and resonance Rayleigh scattering spectroscopy (RRS). The results showed that the spherical sulfur nanoparticles could self-assemble into nanorods in PEG-200. During the self-assembling process, the absorption band showed a red shift and the RRS intensity enhanced continuously. There was physical cross-linking between PEG and sulfur nanoparticles. PEG-200 induced the oriented attachment of sulfur nanoparticles by the terminal hydroxyl groups. This research provides a greener and more environment-friendly synthetic method for the production of sulfur nanorods.

36 MATERIALS SCIENCE↗

Structural transition in rare earth doped zirconium oxide: A positron annihilation study

Graphical abstract: New microstructural analysis and phase transition of rare earth doped mixed oxide compounds such as: Sm{sub 2−x}Dy{sub x}Zr{sub 2}O{sub 7} (where x = 0.0 ≤ x ≥ 2.0) that are potentially useful as solid oxide fuels, ionic conductors, optoelectronic materials and most importantly as radiation resistant host for high level rad-waste disposal, structural transition in the system is reported through positron annihilation spectroscopy as there is an indication in the X-ray diffraction analysis. Highlights: ► Zirconium oxide material doped with rare earth ions. ► The method of positron annihilation spectroscopy suggests a phase transition in the system. ► The crystal structure transformation from pure pyrochlore to defect fluorite type of structure is shown by X-ray diffraction results. -- Abstract: A series of compounds with the general composition Sm{sub 2−x}Dy{sub x}Zr{sub 2}O{sub 7} (where 0 ≤ x ≥ 2.0) were synthesized by chemical route and characterized by powder X-ray diffraction (XRD) analysis. The rare earth ion namely Sm{sup +3} in the compound was gradually replaced with another smaller and heavier ion, Dy{sup +3} of the 4f series, there by resulting in order–disorder structural transition, which has been studied by positron annihilation lifetime and Doppler broadening spectroscopy. This study reveals the subtle electronic micro environmental changes in the pyrochlore lattice (prevalent due to the oxygen vacancy in anti-site defect structure of the compound) toward its transformation to defect fluorite structure as found in Dy{sub 2}Zr{sub 2}O{sub 7}. A comparison of the changes perceived with PAS as compared to XRD analysis is critically assayed.

36 MATERIALS SCIENCE↗

Controlled synthesis of concave tetrahedral palladium nanocrystals by reducing Pd(acac){sub 2} with carbon monoxide

Graphical abstract: By using CO as a reducing agent, uniform and well-defined concave tetrahedral Pd nanocrystals were successfully synthesized. CO flow rate was the most essential for the formation of the concave tetrahedral nanostructures. The morphologies and sizes of the final products can be well controlled by adjusting the flow rate of CO. Highlights: ► By using CO as a reducing agent, concave tetrahedral Pd nanocrystals were obtained. ► CO flow rate is critical to the formation of concave tetrahedral Pd nanocrystals. ► The selective adsorption of CO on (1 1 0) facets is essential to concave Pd tetrahedra. -- Abstract: CO reducing strategy to control the morphologies of palladium nanocrystals was investigated. By using CO as a reducing agent, uniform and well-defined concave tetrahedral Pd nanocrystals with a mean size of about 55 ± 2 nm were readily synthesized with Pd(acac){sub 2} as a precursor and PVP as a stabilizer. The structures of the as-prepared Pd nanocrystals were characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), ultraviolet–visible (UV–vis) absorption spectroscopy and electrochemical measurements. The results demonstrated that CO was the most essential for the formation of the concave tetrahedral Pd nanostructures. The morphologies and sizes of the final products can be well controlled by adjusting the flow rate of CO. The most appropriate CO flow rate, temperature and time for the formation of the ideal concave tetrahedral Pd nanocrystals was 0.033 mL s{sup −1}, 100 °C and 3 h, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗