Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “APPROXIMATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Time histories of horizontal-tail loads, elevator loads, and deformations on a jet-powered bomber airplane during abrupt pitching maneuvers at approximately 20,000 feet

Time histories are presented of horizontal-tail loads, elevator loads, and deformations on a jet-powered bomber during abrupt pitching maneuvers at a pressure altitude of approximately 20,000 feet. The normal and pitching accelerations measured varied from -0.90b to 3.41g and from -0.73 to 0.80 radian per second per second (sic), respectively, with a Mach number variation of from 0.40 to o.75. The maximum horizontal-tail load measured was 17,250 pounds down. The maximum elevator load was 1900 pounds up. The stabilizer twisted a maximum of 0.76 degrees leading edge down at the tip. The greatest fuselage deflection at the tail was about 1.7 inches down.

Wiener, Bernard↗

Approximate hydrodynamic design of a finite span hydrofoil

Previous work on the motion of various bodies under the surface of a heavy fluid is discussed. The solution of the motion of a flat plate by Keldysh and Lavrentiev is applied to the motion of a hydrofoil, making possible the presentation of charts for determining the lift and resistance of an infinite span hydrofoil operating in a heavy frictionless fluid having infinite depth below the free water surface. Consideration is given to the effects of viscosity and a method is suggested to correct for the finite span. The effect of the water surface on the downwash behind the foil is also discussed. A comparison of theoretical results obtained from this work with experimental data indicates that a basis for the approximate hydrodynamic design of a finite span hydrofoil has been achieved.

HYDRODYNAMICS↗

Approximate method of integration of laminar boundary layer in incompressible fluid

A method is given for the approximate solution of the equations of the two-dimensional laminar boundary layer in an incompressible fluid. The method is based on the use of a system of equations of successive moments that is easily solved for simple supplementary assumptions. The solution obtained is given in closed form by simple formulas and is claimed to be no less accurate than the complicated solutions previously obtained, which were based on the use of special classes of flows.

BOUNDARY LAYER - WING SECTIONS↗

A simple approximation method for obtaining the spanwise lift distribution

The approximation method described makes possible lift-distribution computations in a few minutes. Comparison with an exact method shows satisfactory agreement. The method is of greater applicability than the exact method and includes also the important case of the wing with end plates.

Schrenk, O↗

Approximate calculation of multispar cantilever and semicantilever wings with parallel ribs under direct and indirect loading

A method is presented for approximate static calculation, which is based on the customary assumption of rigid ribs, while taking into account the systematic errors in the calculation results due to this arbitrary assumption. The procedure is given in greater detail for semicantilever and cantilever wings with polygonal spar plan form and for wings under direct loading only. The last example illustrates the advantages of the use of influence lines for such wing structures and their practical interpretation.

Sanger, Eugen↗

Designing An Approximately Balanced LQG Compensator

Method of designing approximately balanced, low-order linear-quadratic-Gaussian LQG compensator for use in feedback control of flexible structure devised. Low-order controller and estimator controls flexible structure efficiently.

Gawronski, Wodek↗

Approximating Effect Of Spherical Radiation Pattern

Time-division multiple-access TDMA multichannels radio communication system implements scheme of temporal and spatial multiplexing of signals to approximate effect of spherical antenna radiation pattern. Signal to be transmitted sped up by factor of n and transmitted in n replicas via n antennas. During reception, incoming signal processed by use of maximum-signal-selection or diversity-reception demodulated-signal-combining technique.

Sickles, Louis, II↗

Accumulated approximation: A new method for structural optimization by iterative improvement

A new method for the solution of non-linear mathematical programming problems in the field of structural optimization is presented. It is an iterative scheme which for each iteration refines the approximation of objective and constraint functions by accumulating the function values of previously visited design points. The method has proven to be competitive for a number of well-known examples of which one is presented here. Furthermore because of the accumulation strategy, the method produces convergence even when the sensitivity analysis is inaccurate.

Rasmussen, John↗

Approximate minimum-time trajectories for two-link flexible manipulators

The method of recursive quadratic programming was used to generate approximate minimum-time tip trajectories for two-link semi-rigid and flexible manipulator movements in the horizontal plane. The manipulator is modeled with an efficient finite-element scheme for an n-link, m-joint system with bending only in the horizontal plane. Constraints on the trajectory include boundary conditions on position and energy for a rest-to-rest maneuver, straight-line tracking between boundary positions, and motor torque limits. Trajectory comparisons utilize a change in the link stiffness to compare a semi-rigid configuration to a flexible one. The level of bending flexibility necessary to excite significant modal behavior is demonstrated. Applied torques for minimum-time maneuvers are shown to be very similar between configurations and retain much of the qualitative character of rigid-body slewing motion.

Eisler, G. R.↗

On the stability analysis of approximate factorization methods for 3D Euler and Navier-Stokes equations

The convergence characteristics of various approximate factorizations for the 3D Euler and Navier-Stokes equations are examined using the von-Neumann stability analysis method. Three upwind-difference based factorizations and several central-difference based factorizations are considered for the Euler equations. In the upwind factorizations both the flux-vector splitting methods of Steger and Warming and van Leer are considered. Analysis of the Navier-Stokes equations is performed only on the Beam and Warming central-difference scheme. The range of CFL numbers over which each factorization is stable is presented for one-, two-, and three-dimensional flow. Also presented for each factorization is the CFL number at which the maximum eigenvalue is minimized, for all Fourier components, as well as for the high frequency range only. The latter is useful for predicting the effectiveness of multigrid procedures with these schemes as smoothers. Further, local mode analysis is performed to test the suitability of using a uniform flow field in the stability analysis. Some inconsistencies in the results from previous analyses are resolved.

Demuren, A. O.↗

Approximate Green's function methods for HZE transport in multilayered materials

A nonperturbative analytic solution of the high charge and energy (HZE) Green's function is used to implement a computer code for laboratory ion beam transport in multilayered materials. The code is established to operate on the Langley nuclear fragmentation model used in engineering applications. Computational procedures are established to generate linear energy transfer (LET) distributions for a specified ion beam and target for comparison with experimental measurements. The code was found to be highly efficient and compared well with the perturbation approximation.

Wilson, John W.↗

Second order distorted born approximation for backscattering from a layer of discrete random medium

In recent years there has been increasing interest in scattering and depolarization characteristics of the vegetation canopies. Scattering models applied to the microwave remote sensing of vegetation canopies showed that multiple scattering effects can be important in simulating the backscattering coefficients correctly. In particular, in most applications, the cross-polarized backscattering coefficients are often underestimated by single scattering models. Recently, there have been concerted efforts to include the second order terms in the radiative transfer models of vegetation canopies in order to account for multiple scattering within the canopy. The coherent wave theory approach is extended to include multiple scattering effects to predict the coherent and incoherent backscattering contributions from a layer of vegetation canopy. The problem is initially formulated in terms of the exact equation for the correlation function of the field, i.e., the Bethe-Salpeter equation. Using fractional volume as a small parameter, a Foldy type approximation is made to obtain a more manageable correlation equation. This equation is iterated to obtain first and second order solutions. The iteration procedure assumes the variance of the field fluctuations are small compared to the coherent intensity. This assumption proved to be particularly successful in computing backscattering coefficients. First and second order backscattering coefficients are calculated from the iterants of the correlation equation. It is shown that the first order coefficients are the same as the distorted Born results used previously by the authors. These results contained enhancement terms in the direct-reflected contributions. The important contributions to second order backscattering are examined and interpreted in terms of scattering diagrams. Examples of situations in which second order backscattering coefficients are important are given.

Lang, Roger H.↗

A finite-difference approximate-factorization algorithm for solution of the unsteady transonic small-disturbance equation

A time-accurate approximate-factorization (AF) algorithm is described for solution of the three-dimensional unsteady transonic small-disturbance equation. The AF algorithm consists of a time-linearization procedure coupled with a subiteration technique. The algorithm is the basis for the Computational Aeroelasticity Program-Transonic Small Disturbance (CAP-TSD) computer code, which was developed for the analysis of unsteady aerodynamics and aeroelasticity of realistic aircraft configurations. The paper describes details on the governing flow equations and boundary conditions, with an emphasis on documenting the finite-difference formulas of the AF algorithm.

Batina, John T.↗

An approximate Riemann solver for magnetohydrodynamics (that works in more than one dimension)

An approximate Riemann solver is developed for the governing equations of ideal magnetohydrodynamics (MHD). The Riemann solver has an eight-wave structure, where seven of the waves are those used in previous work on upwind schemes for MHD, and the eighth wave is related to the divergence of the magnetic field. The structure of the eighth wave is not immediately obvious from the governing equations as they are usually written, but arises from a modification of the equations that is presented in this paper. The addition of the eighth wave allows multidimensional MHD problems to be solved without the use of staggered grids or a projection scheme, one or the other of which was necessary in previous work on upwind schemes for MHD. A test problem made up of a shock tube with rotated initial conditions is solved to show that the two-dimensional code yields answers consistent with the one-dimensional methods developed previously.

Powell, Kenneth G.↗

Sensitivity of lag-damping correlations to structural and aerodynamic approximations of isolated experimental rotors in forward flight

The predictions of regressive lag-mode damping levels are correlated with the database of an isolated, soft-inplane, three-blade rotor operated untrimmed. The database was generated at the Army Aeroflightdynamics Directorate at Ames. The correlation covers a broad range of data, from near-zero thrust conditions in hover to high-thrust and highly stalled conditions in forward flight with advance ratio as high as 0.55 and shaft angle as high as 20 degrees. In the experimental rotor, the airfoil or blade portion has essentially uniform mass and stiffness distributions, but the root flexure has highly nonuniform mass and stiffness distributions. Accordingly, the structural approximations refer to four models of root-flexure-blade assembly. They range from a rigid flap-lag model to three elastic flap-lag-torsion models, which differ in modeling the root flexure. The three models of root-flexure are: three root springs in which the bending-torsion couplings are fully accounted for; a finite-length beam element with some average mass and stiffness distributions such that the fundamental frequencies match those of the experimental model; and accurate modal representation in which the actual mass and stiffness distributions of the experimental root-flexure-blade assembly are used in calculating the nonrotating mode shapes. The four models of root-flexure-blade assembly are referred to as the rigid flap-lag model, spring model, modified model and modal model. For each of these four models of the root-flexure-blade assembly, the predictions are based on the following five aerodynamic theories: ear theory, which accounts for large angle-of-attack and reverse-flow effects on lift, and has constant drag and pitching moment; quasisteady stall theory, which includes quasisteady stall lift, drag and pitching moment characteristics of the airfoil section, dynamics stall theory, which uses the ONERA dynamic stall models of lift, drag and pitching moment; dynamic wake theory, which is based on a finite-state three-dimensional wake model and includes all wake effects including both shed and trailing vorticity; and dynamics and wake theory, which combines both dynamic stall theory and dynamic wake theory and is a relatively complete aerodynamic representation.

Gaonkar, G. H.↗

Vibration suppression with approximate finite dimensional compensators for distributed systems: Computational methods and experimental results

Based on a distributed parameter model for vibrations, an approximate finite dimensional dynamic compensator is designed to suppress vibrations (multiple modes with a broad band of frequencies) of a circular plate with Kelvin-Voigt damping and clamped boundary conditions. The control is realized via piezoceramic patches bonded to the plate and is calculated from information available from several pointwise observed state variables. Examples from computational studies as well as use in laboratory experiments are presented to demonstrate the effectiveness of this design.

Banks, H. T.↗

Spectral solution of the viscous blunt body problem. 2: Multidomain approximation

We present steady solutions of high speed viscous flows over blunt bodies using a multidomain Chebyshev spectral collocation method. The region with the shock layer is divided into subdomains so that internal layers can be well-resolved. In the interiors of the subdomains, the solution is approximated by Chebyshev collocation. At interfaces between subdomains, the advective terms are upwinded and the viscous terms are treated by a penalty method. The method is applied to five flows, the Mach number range 5-25 and Reynolds number range 2,000 - 83,000, based on nose radius. Results are compared to experimental data and to a finite difference result.

Kopriva, David A.↗

Comparison of exact solution with Eikonal approximation for elastic heavy ion scattering

A first-order optical potential is used to calculate the total and absorption cross sections for nucleus-nucleus scattering. The differential cross section is calculated by using a partial-wave expansion of the Lippmann-Schwinger equation in momentum space. The results are compared with solutions in the Eikonal approximation for the equivalent potential and with experimental data in the energy range from 25A to 1000A MeV.

Dubey, Rajendra R.↗