Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vibration data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Understanding the anharmonic vibrational structure of the carbon dioxide dimer

Understanding the vibrational structure of the CO 2 system is important to confirm the potential energy surface and interactions in such van der Waals complexes. In this work, we use our previously developed mbCO2 potential function to explore the vibrational structure of the CO 2 monomer and dimer. The potential function has been trained to reproduce the potential energies at the CCSD(T)-F12b/aug-cc-pVTZ level of electronic structure theory. The harmonic approximation, as well as anharmonic corrections using vibrational structure theories such as vibrational self-consistent field, vibrational second-order Moller-Plesset perturbation, and vibrational configuration interaction (VCI), is applied to address the vibrational motions. We compare the vibrational results using the mbCO2 potential function with traditional electronic structure theory results and to experimental frequencies. The anharmonic results for the monomer most closely match the experimental data to within 3 cm -1 , including the Fermi dyad frequencies. The intermolecular and intramolecular dimer frequencies were treated separately and show good agreement with the most recent theoretical and experimental results from the literature. The VCI treatment of the dimer vibrational motions accounts for vibrational mixing and delocalization, such that we observe the dimer Fermi resonance phenomena, both in the intramolecular and intermolecular regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic response of a hammerhead launch vehicle wind-tunnel model

A wind-tunnel test of a 1/10th-scale Atlas-Centaur I large payload fairing launch vehicle model was conducted in the NASA Langley Transonic Dynamics Tunnel. The wind tunnel model was an aeroelastically-scaled version of the flight vehicle and was capable of simulating either of the first two bending vibration modes of the full-scale vehicle by a partial mode technique. The primary purpose of the test was to gather data concerning buffet response which could be used to clear the vehicle for flight. Additionally, angle-of-attack studies were conducted and several payload fairing configurations were tested to assess the buffet response and dynamic stability of off-design flight conditions and geometric parameters. No dynamic instabilities were found for any of the configurations tested. The buffet response data for the nominal flight configuration indicate that the unsteady buffet loads represent 5 to 10 percent of the total design load; therefore, the buffet loads are not a large factor affecting the overall vehicle design. Payload fairing length-to-diameter ratio variations were found to have small effects on the buffet response of the model, except in the case of the smallest length-to-diameter models for the second bending mode simulation. The effects of angle of attack on buffet response were found to be small. The model was more sensitive to Mach number changes than to angle of attack. The buffet response results from this wind tunnel test were influenced by the tunnel facility vibration levels. An attempt was made to experimentally reduce the effect of the facility mechanical vibration for the nominal flight configuration by testing with vertical rods used to stiffen the sting support. The first flight of the Atlas-Centaur I vehicle successfully occurred on July 25, 1990, and a comparison of flight measurements with wind tunnel data is presented. The flight data was found to be well within the 3 sigma level of the wind tunnel data.

Cole, Stanley R.↗

AI-powered exploration of molecular vibrations, phonons, and spectroscopy

The vibrational dynamics of molecules and solids play a critical role in defining material properties, particularly their thermal behaviors. However, theoretical calculations of these dynamics are often computationally intensive, while experimental approaches can be technically complex and resource-demanding. Recent advancements in data-driven artificial intelligence (AI) methodologies have substantially enhanced the efficiency of these studies. This review explores the latest progress in AI-driven methods for investigating atomic vibrations, emphasizing their role in accelerating computations and enabling rapid predictions of lattice dynamics, phonon behaviors, molecular dynamics, and vibrational spectra. Key developments are discussed, including advancements in databases, structural representations, machine-learning interatomic potentials, graph neural networks, and other emerging approaches. Compared to traditional techniques, AI methods exhibit transformative potential, dramatically improving the efficiency and scope of research in materials science. The review concludes by highlighting the promising future of AI-driven innovations in the study of atomic vibrations.

Han, Bowen [Oak Ridge National Laboratory (ORNL), ↗

Effective field theory for nuclear vibrations with quantified uncertainties

We develop an effective field theory (EFT) for nuclear vibrations. The key ingredients—quadrupole degrees of freedom, rotational invariance, and a breakdown scale around the three-phonon level—are taken from data. The EFT is developed for spectra and electromagnetic moments and transitions. We employ tools from Bayesian statistics for the quantification of theoretical uncertainties. The EFT consistently describes spectra and electromagnetic transitions for 62 Ni, 98,100 Ru, 106,108 Pd, 110,112,114 Cd, and 118,120,122 Te within the theoretical uncertainties. Furthermore, this suggests that these nuclei can be viewed as anharmonic vibrators.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comprehensive Fe-ligand vibration identification in {FeNO} 6 Hemes

Oriented single-crystal nuclear resonance vibrational spectroscopy (NRVS) has been used to obtain all iron vibrations in two {FeNO} 6 porphyrinate complexes, five-coordinate [Fe(OEP)(NO)]ClO 4 and six-coordinate [Fe(OEP)(2-MeHIm)(NO)]ClO 4 . A new crystal structure was required for measurements of [Fe(OEP)(2-MeHIm)(NO)]ClO 4 , and the new structure is reported herein. Single crystals of both complexes were oriented to be either parallel or perpendicular to the porphyrin plane and/or axial imidazole ligand plane. Thus, the FeNO bending and stretching modes can now be unambiguously assigned; the pattern of shifts in frequency as a function of coordination number can also be determined. The pattern is quite distinct from those found for CO or {FeNO} 7 heme species. This is the result of unchanging Fe–N NO bonding interactions in the {FeNO} 6 species, in distinct contrast to the other diatomic ligand species. DFT calculations were also used to obtain detailed predictions of vibrational modes. Predictions were consistent with the intensity and character found in the experimental spectra. The NRVS data allow the assignment and observation of the challenging to obtain Fe–Im stretch in six-coordinate heme derivatives. Furthermore, NRVS data for this and related six-coordinate hemes with the diatomic ligands CO, NO, and O 2 reveal a strong correlation between the Fe–Im stretch and Fe–N Im bond distance that is detailed for the first time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Infrared and Raman spectra, DFT-calculations and spectral assignments of germacyclohexane

Raman spectra of germacyclohexane in liquid and solid states were recorded and depolarization data obtained. Infrared absorption spectra of the vapor and liquid have been studied. The wavenumbers of the vibrational modes were derived in the harmonic and anharmonic approximation in B3LYP/ccpVTZ calculations. According to the calculations, germacyclohexane exists in the stable chair conformation, whereas a possible twist form should have more than 15 kJ·mol{sup -1} higher enthalpy of formation what makes this conformer experimentally not observable. The 27 A' and 21 A'' fundamentals were assigned on the basis of the calculations and infrared and Raman band intensities, contours of gas phase infrared spectral bands and Raman depolarization measurements. An average discrepancy of ca. 0.77 % was found between the observed and the calculated anharmonic wavenumbers for the 48 modes. Substitution of carbon atom with Ge atom in the cyclohexane ring is reasoning flattening of the ring.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

FT-IR and Zeta potential measurements on TiO nanoparticles

In the present investigation, ultrafine TiO particles have been synthesized successfully by thermal decomposition method. The sample was characterized by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. As-synthesized TiO nanoparticles have a cubic structure as characterized by power X-ray diffraction (XRD), which shows that TiO nanoparticles have narrow size distribution with particle size 11.5 nm. FTIR data shows a strong peak at 1300 cm{sup −1}, assignable to the Ti-O stretching vibrations mode.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

OM300 Direction Drilling Module

OM300 – Geothermal Direction Drilling Navigation Tool: Design and produce a prototype directional drilling navigation tool capable of high temperature operation in geothermal drilling Accuracies of 0.1° Inclination and Tool Face, 0.5° Azimuth Environmental Ruggedness typical of existing oil/gas drilling Multiple Selectable Sensor Ranges High accuracy for navigation, low bandwidth High G-range & bandwidth for Stick-Slip and Chirp detection Selectable serial data communications Reduce cost of drilling in high temperature Geothermal reservoirs Innovative aspects of project Honeywell MEMS* Vibrating Beam Accelerometers (VBA) APS Flux-gate Magnetometers Honeywell Silicon-On-Insulator (SOI) High-temperature electronics Rugged High-temperature capable package and assembly process

15 GEOTHERMAL ENERGY↗

Research requirements for development of advanced-technology helicopter transmissions

Helicopter drive-system technology which would result in the largest benefit in direct maintenance cost when applied to civil helicopters in the 1980 timeframe was developed. A prototype baseline drive system based on 1975 technology provided the basis for comparison against the proposed advanced technology in order to determine the potential for each area recommended for improvement. A specific design example of an advanced-technology main transmission is presented to define improvements for maintainability, weight, producibility, reliability, noise, vibration, and diagnostics. Projections of the technology achievable in the 1980 timeframe are presented. Based on this data, the technologies with the highest payoff (lowest direct maintenance cost) for civil-helicopter drive systems are identified.

Lemanski, A. J.↗

Life testing of Mallory cells

Tests were performed to assess the effects of storage time, storage temperature, vibration, discharge rate and temperature, and capacity of high-rate, D size, lithium sulfur dioxide cells. Data from these tests are discussed.

Dugan, D.↗

Digital system for dynamic turbine engine blade displacement measurements

An instrumentation concept for measuring blade tip displacements which employs optical probes and an array of micro-computers is presented. The system represents a hitherto unknown instrumentation capability for the acquisition and direct digitization of deflection data concurrently from all of the blade tips of an operational engine rotor undergoing flutter or forced vibration. System measurements are made using optical transducers which are fixed to the case. Measurements made in this way are the equivalent of those obtained by placing three surface-normal displacement transducers at three positions on each blade of an operational rotor.

Kiraly, L. J.↗

Dayglow emissions of the O2 Herzberg bands and the Rayleigh backscattered spectrum of the earth

It is pointed out that numerous fluorescent emissions from the Herzberg bands of molecular oxygen lie in the spectral region 242-300 nm. This coincides with the wavelength range used by orbiting spectrometers that observe the Rayleigh backscattered spectrum of the earth for the purpose of monitoring the vertical distribution of stratospheric ozone. Model calculations suggest that Herzberg band emissions in the dayglow could provide significant contamination of the ozone measurements if the quenching rate of O2(A3Sigma) is sufficiently small. It is noted that this is especially true near 255 nm, where the most intense fluorescent emissions relative to the Rayleigh scattered signal are located and where past satellite measurements have shown a persistent excess radiance above that expected for a pure ozone absorbing and molecular scattering atmosphere. Very small quenching rates, however, are adequate to reduce the dayglow emission to negligible levels. Noting that available laboratory data have not definitely established the quenching on the rate of O2(A3Sigma) as a function of vibration level, it is emphasized that such information is required before the Herzberg band contributions can be evaluated with confidence.

Frederick, J. E.↗

Handbook on COMTAL's Image Processing System

An image processing system is the combination of an image processor with other control and display devices plus the necessary software needed to produce an interactive capability to analyze and enhance image data. Such an image processing system installed at NASA Langley Research Center, Instrument Research Division, Acoustics and Vibration Instrumentation Section (AVIS) is described. Although much of the information contained herein can be found in the other references, it is hoped that this single handbook will give the user better access, in concise form, to pertinent information and usage of the image processing system.

Faulcon, N. D.↗

Galileo spacecraft modal test and evaluation of testing techniques

The structural configuration, modal test requirements and pre-test activities involved in modeling the expected dynamic environment and responses of the Galileo spacecraft are discussed. The probe will be Shuttle-launched in 1986 and will gather data on the Jupiter system. Loads analysis for the 5300 lb spacecraft were performed with the NASTRAN code, and covered 10,000 static degrees of freedom and 1600 mass degrees of freedom. A modal analysis will be used to verify the predictions for natural frequencies, mode shapes, orthogonality checks, residual mass, modal damping and forces, and generalized forces. Verification of the validity of considering only 70 natural modes in the numerical simulation is being performed by examining the forcing functions of the analysis. The analysis led to requirements that 162 channels of accelerometer data and 118 channels of strain gage data be recorded during shaker tests to reveal areas where design changes will be needed to eliminate vibration peaks.

Chen, J.-C.↗

Computational fluid dynamics and aerothermodynamics

Approximations applicable to the radiating, reacting, and conducting stagnation region of a hypervelocity vehicle were incorporated into a method for rapidly obtaining approximate solutions. This solution utilizes a coordinate system based upon the origin of the radiative losses and includes in a phenomenologically correct manner the effects of chemical and thermal nonequilibrium, and nonequilibrium, nongray radiative transfer. Results were presented which demonstrate the usefulness of the method and indicate which radiation parameters require further study and definition. Excellent comparisons were obtained with published results for the Fire2 data. An axisymmetric nonequilibrium inverse method was modified and extended and used to investigate and compare various vibration dissociation chemistry coupling models and radiative heat transfer approximations. The similarities, differences, and consequences of using these models in the Aero-assist Orbital Transfer Vehicles flight regime will be discussed.

Carlson, Leland A.↗

Did comets come from unaltered interstellar dust and ices? The evidence from infrared spectroscopy

IR spectroscopy data are the bases of the present comparative study of cometary and interstellar dust compositions, allowing the vibrational bands of molecular components to be directly compared at IR wavelengths. Significant organic and silicate band profile differences are noted between comets and molecular clouds' interstellar grains; attention is given to the range of observational efforts, such as the determination of comets' formation temperature from the ortho/para ratio of H2O, which may serve to resolve the question as to whether interstellar dust and ices were the bases for cometary formation without alteration.

Tokunaga, A. T.↗