Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Terahertz dielectric analysis and spin-phonon coupling in multiferroic GeV 4 S 8

We present an investigation of the multiferroic lacunar spinel compound GeV 4 S 8 using time-domain terahertz spectroscopy. We find three absorptions which either appear or shift at the antiferromagnetic transition temperature, T N =17K, as S=1 magnetic moments develop on vanadium tetrahedra. Two of these absorptions are coupled to the magnetic state and one only appears below the Néel temperature, and is interpreted as a magnon. We also observe isosbestic points in the dielectric constant in both the temperature and frequency domains. Further, we perform an analysis on the isosbestic features to reveal an interesting collapse into a single curve as a function of both frequency and temperature, behavior which exists throughout the phase transitions. This analysis suggests the importance of spectral changes in the terahertz range which are linear in frequency and temperature.

36 MATERIALS SCIENCE↗

Ice I h revisited: No proton tunneling observed in a quasielastic neutron scattering experiment

A large broadening (${\sim}0.4\mathrm{meV}$) of quasielastic neutron scattering (QENS) signal in ${\mathrm{H}}_{2}\mathrm{O}$ ice ${I}_{h}$ at $T=5\mathrm{K}$ was observed by Bove et al. [Phys. Rev. Lett. 103, 165901 (2009)] and explained by a model of concerted proton tunneling. This result was rather unexpected, as prior studies never showed significant mobility in water at low temperatures and ambient pressure. There were a few attempts of theoretical understanding of the effect. Recent path-integral simulations as well as quantum lattice-gauge theory supported the possibility of the collective tunneling of protons in ice ${I}_{h}$, however other studies stated that concerted tunneling in ice ${I}_{h}$ should have very low frequency. In this paper, we report on QENS measurements of ${\mathrm{H}}_{2}\mathrm{O}$ ice ${I}_{h}$ at 1.8 and 5 K by using neutron scattering spectrometers with the energy resolution similar to and four times better than the energy resolution in the original experiment of Bove and co-workers. We did not observe any QENS broadening, and the measured spectra for the ice ${I}_{h}$ and the reference vanadium sample were almost identical. Therefore, we conclude that there is no proton tunneling in ice ${I}_{h}$ at temperatures down to 1.8 K measurable on an energy scale of 3.5 ${\mu}\mathrm{eV}$ and above. Finally, the literature data on low-temperature heat capacity of ice ${I}_{h}$ support this conclusion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Insulator-metal transitions in the T phase Cr-doped and M 1 phase undoped VO 2 thin films

${\mathrm{VO}}_{2}$ exhibits several insulating phases (monoclinic $M1,M2$, and triclinic $T)$, and the study of these phases is important for understanding the true nature of the insulator-to-metal transition (IMT) in ${\mathrm{VO}}_{2}$. These insulating phases have small but discernible crystallographic differences in the vanadium chains forming the dimers. Peculiarities of the electron localizations in the dimerized chains for many of the probes such as NMR make it difficult to characterize the true character of these phases [T. J. Huffman et al., Phys. Rev. B 95, 075125 (2017); J. Pouget et al., Phys. Rev. B 10, 1801 (1974)]. We present structural, electrical, ultrafast-reflectivity, and electronic structure studies of the $T$ phase Cr-doped ${\mathrm{VO}}_{2}$ and the $M1$ phase pure ${\mathrm{VO}}_{2}$ thin films, both grown by pulsed laser deposition under identical conditions. An intermediate $M2$ structure is observed in the Cr-doped ${\mathrm{VO}}_{2}$, while the pure ${\mathrm{VO}}_{2}$ directly goes from the insulating monoclinic $M1$ structure to a metallic rutile $R$ structure, manifested by temperature-dependent Raman spectroscopy. Temperature-dependent electronic structure studies utilizing x-ray near-edge absorption spectroscopy reveal that all these insulating phases (monoclinic $M1$ and $M2$ and triclinic $T)$ have similar electronic structures which place these insulating phases into the list of Mott-Hubbard insulators. This is a first combined experimental report on the electronic structure of all the three insulating phases, monoclinic $M1,M2$, and triclinic $T$.

36 MATERIALS SCIENCE↗

Charge-Order-Induced Ferroelectricity in LaVO 3 / Sr VO 3 Superlattices

In this paper, the structure and properties of the $1{\mathbin:}1$ superlattice of ${\mathrm{LaVO}}_{3}$ and ${\mathrm{SrVO}}_{3}$ are investigated with a first-principles density-functional-theory-plus-$U$ ($\mathrm{DFT}+U$) method. The lowest energy states are antiferromagnetic charge-ordered Mott-insulating phases. In one of these insulating phases, layered charge ordering combines with the layered La/Sr cation ordering to produce a polar structure with a large nonzero spontaneous polarization normal to the interfaces. This polarization, comparable to that of conventional ferroelectrics, is produced by electron transfer between the ${\mathrm{V}}^{3+}$ and ${\mathrm{V}}^{4+}$ layers. The energy of this normal-polarization state relative to the ground state is only 3 meV per vanadium. Under tensile strain, this energy difference can be further reduced, suggesting that the normal-polarization state can be induced by an electric field applied normal to the superlattice layers, yielding an antiferroelectric double-hysteresis loop. Finally, if the system does not switch back to the ground state on removal of the field, a ferroelectric-type hysteresis loop could be observed.

36 MATERIALS SCIENCE↗

Fermi Surface Nesting and Phonon Frequency Gap Drive Anomalous Thermal Transport

The lattice thermal conductivity, k L , of typical metallic and nonmetallic crystals decreases rapidly with increasing temperature because phonons interact more strongly with other phonons than they do with electrons. Using first principles calculations, we show that k L can become nearly independent of temperature in metals that have nested Fermi surfaces and large frequency gaps between acoustic and optic phonons. Then, the interactions between phonons and electrons become much stronger than the mutual interactions between phonons, giving the fundamentally different k L behavior. This striking trend is revealed here in the group V transition metal carbides, vanadium carbide, niobium carbide, and tantalum carbide, and it should also occur in several other metal compounds. As a result, this work gives insights into the physics of heat conduction in solids and identifies a new heat flow regime driven by the interplay between Fermi surfaces and phonon dispersions.

36 MATERIALS SCIENCE↗

Superconductivity in the Surface State of Noble Metal Gold and its Fermi Level Tuning by EuS Dielectric

The induced superconductivity (SC) in a robust and scalable quantum material with strong Rashba spin-orbit coupling is particularly attractive for generating topological superconductivity and Majorana bound states (MBS). Gold (111) thin film has been proposed as a promising candidate because of the large Rashba energy, the predicted topological nature, and the possibility for large-scale MBS device fabrications. We experimentally demonstrate two important steps towards achieving such a goal. We successfully show induced SC in the Shockley surface state (SS) of ultrathin Au(111) layers grown over epitaxial vanadium films, which is easily achievable on a wafer scale. Here, the emergence of SC in the SS, which is physically separated from a bulk superconductor, is attained by indirect quasiparticle scattering processes instead of by conventional interfacial Andreev reflections. We further show the ability to tune the SS Fermi level (E F ) by interfacing SS with a high-κ dielectric ferromagnetic insulator EuS. The shift of E F from ~550 to ~34 mV in superconducting SS is an important step towards realizing MBS in this robust system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CsV 3 Sb 5 : A $\mathbb{Z}_2$ Topological Kagome Metal with a Superconducting Ground State

Recently discovered alongside its sister compounds KV 3 Sb 5 and RbV 3 Sb 5 , CsV 3 Sb 5 crystallizes with an ideal kagome network of vanadium and antimonene layers separated by alkali metal ions. This work presents the electronic properties of CsV 3 Sb 5 , demonstrating bulk superconductivity in single crystals with a T c = 2.5 K. The normal state electronic structure is studied via angle-resolved photoemission spectroscopy and density-functional theory, which categorize CsV 3 Sb 5 as a Z 2 topological metal. Multiple protected Dirac crossings are predicted in close proximity to the Fermi level (E F ), and signatures of normal state correlation effects are also suggested by a high-temperature charge density wavelike instability. Finally, the implications for the formation of unconventional superconductivity in this material are discussed.

36 MATERIALS SCIENCE↗

Realizing Kagome Band Structure in Two-Dimensional Kagome Surface States of RV 6 Sn 6 (R = Gd, Ho)

Here, we report angle resolved photoemission experiments on a newly discovered family of kagome metals RV 6 Sn 6 (R = Gd, Ho). Intrinsic bulk states and surface states of the vanadium kagome layer are differentiated from those of other atomic sublattices by the real-space resolution of the measurements with a small beam spot. Characteristic Dirac cone, saddle point, and flat bands of the kagome lattice are observed. Our results establish the two-dimensional (2D) kagome surface states as a new platform to investigate the intrinsic kagome physics.

2-dimensional systems↗

Charge Density Wave in Kagome Lattice Intermetallic ScV 6 Sn 6

Materials hosting kagome lattices have drawn interest for the diverse magnetic and electronic states generated by geometric frustration. In the AV 3 Sb 5 compounds (A=K, Rb, Cs), stacked vanadium kagome layers give rise to unusual charge density waves (CDW) and superconductivity. In this work, we report single-crystal growth and characterization of ScV 6 Sn 6 , a hexagonal HfFe 6 Ge 6 -type compound that shares this structural motif. We identify a first-order phase transition at 92 K. Single crystal x-ray and neutron diffraction reveal a charge density wave modulation of the atomic lattice below this temperature. This is a distinctly different structural mode than that observed in the AV 3 Sb 5 compounds, but both modes have been anticipated in kagome metals. The diverse HfFe 6 Ge 6 family offers more opportunities to tune ScV 6 Sn 6 and explore density wave order in kagome lattice materials.

36 MATERIALS SCIENCE↗

Coherent growth and characterization of van der Waals 1T-VSe2 layers on GaAs(111)B using molecular beam epitaxy

We report epitaxial growth of vanadium diselenide (VSe₂) thin films in the octahedrally coordinated (1T) structure on GaAs(111)B substrates by molecular beam epitaxy. Film thickness from a single monolayer (ML) up to 30 ML is demonstrated. Structural and chemical studies using x-ray diffraction, transmission electron microscopy, scanning tunneling microscopy, and x-ray photoelectron spectroscopy indicate high-quality thin films. Further studies show that monolayer VSe₂ films on GaAs are not air stable and are susceptible to oxidation within a matter of hours, which indicates that a protective capping layer should be employed for device applications. This work demonstrates that VSe₂, a candidate van der Waals material for possible spintronic and electronic applications, can be integrated with III-V semiconductors via epitaxial growth for two- and three-dimensional hybrid devices.

2D materials↗

Antiferromagnetic V 2 ⁢O 3 based exchange coupling

Vanadium sesquioxide (V 2 ⁢O 3 ) is a strongly correlated electronic material that famously undergoes a triple coupled first-order transition where it transitions from a paramagnetic metal with a rhombohedral structure at high temperature to an antiferromagnetic insulator with a monoclinic structure. While several studies have used one of both electronic and structural transitions to control the properties of a heterostructure, evidence of magnetic coupling has notoriously yet to be found. In this paper, we report on a robust magnetic coupling between the antiferromagnetic (AFM) V 2 ⁢O 3 and ferromagnetic (FM) Permalloy (Py) layers that results in a significant exchange bias and strain-induced coercivity enhancement. We provide a temperature and angle-dependent study of magnetic properties, which clearly indicates exchange bias at the AFM/FM interface that appears at the onset of the metal-insulator transition. The magnitude of the exchange bias is strongest when the field is applied along the [001] V 2 ⁢O 3 crystallographic orientation which corresponds to an AFM spin configuration on the [110] surface. Here, this opens the door to designing and implementing novel functionalities in transition metal oxide-based computing using the connection between magnetism and the metal-insulator transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure cells for in situ neutron total scattering: time and real-space resolution during deuterium absorption

In situ gas-loading sample holders for two-dimensionally arranged detectors in time-of-flight neutron total scattering experiments have been developed to investigate atomic arrangements during deuterium absorption using time and real-space resolution. A single-crystal sapphire container was developed that allows conditions of 473 K and 10 MPa hydrogen gas pressure. High-resolution transient measurements detected deuterium absorption by palladium that proceeded within a few seconds. A double-layered container with thick- and thin-walled vanadium allowed conditions of 423 K and 10 MPa hydrogen gas pressure. The deuterium occupation sites of a lanthanum–nickel–aluminium alloy are discussed in detail on the basis of real-space high-resolution data obtained from in situ neutron scattering measurements and reverse Monte Carlo structural modeling.

08 HYDROGEN↗

Field Validated Utility-Scale Battery Storage Control Models for Quasi-Static Analyses

This paper presents a co-simulation based approach to implement and validate advanced battery storage control modes in OpenDSS that replicate behavior of a utility scale vanadium red-ox flow battery (VRFB). Inverter-interfaced utiliy-scale battery storage systems (BSS) have modes of operation to facilitate multiple grid-support functions. In order to enable accurate understanding of the impacts from grid-support functions modes of operation it is required to develop validated models that replicates behavior of the actual control system. This paper presents the pseudo code for the implemented control schemes including peak shaving and capacity firming control modes. Additionally, this paper also provides insight on convergence sensitivity of the presented algorithms to related parameters. The results obtained from simulation studies will be compared against field operated utility-scale BSS measurements to verify the implemented algorithms.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Recent Advancements in Reconfigurable mmWave Devices Based on Phase-Change and Metal Insulator Transition Materials

Chalcogenide Phase Change Materials (PCM) and metal insulator transition (MIT) materials are a group of materials that are capable of switching between low resistance and high resistance states. These emerging materials have been widely used in optical storage media and memory devices. Over the past recent years, there have been interests in exploiting the PCM and MIT materials, especially germanium antimony telluride (GST) alloys and vanadium dioxide (VO 2 ), for radio frequency (RF) applications. The PCM and MIT-based RF devices are expected to bridge the gap between semiconductor switches and microelectromechanical system (MEMS) switches as they combine the low insertion loss performance of MEMS technology and the small size and reliability performance of semiconductor technology. This article presents an overview of the PCM and MIT materials for RF circuits and discusses the recent advancements in reconfigurable millimeter-wave (mmWave) devices based on PCM and MIT materials in depth.

36 MATERIALS SCIENCE↗

Battery Energy Storage System (BESS) and Battery Management System (BMS) for Grid-Scale Applications

The current electric grid is an inefficient system that wastes significant amounts of the electricity it produces because there is a disconnect between the amount of energy consumers require and the amount of energy produced from generation sources. Power plants typically produce more power than necessary to ensure adequate power quality. By taking advantage of energy storage within the grid, many of these inefficiencies can be removed. Advanced modeling is required when using battery energy storage systems (BESS) for grid storage in order to accurately monitor and control the storage system. Battery management systems (BMS) control how the storage system will be used and a BMS that utilizes advanced physics-based models will offer for much more robust operation of the storage system. The paper outlines the current state of the art for modeling in BMS and the advanced models required to fully utilize BMS for both lithium-ion batteries and vanadium redox-flow batteries. In addition, system architecture and how it can be useful in monitoring and control is discussed. A pathway for advancing BMS to better utilize BESS for grid-scale applications is outlined.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Total Internal Reflection Photoconductive Switch

We demonstrate a novel illumination technique for extrinsic photoconductive switches based on the creation of a total internal reflection trap to increase the optical path length. The optimal geometry is a square substrate illuminated from one of the corners along the diagonal, ensuring that the total internal reflection condition is maintained after any reflection off the device lateral sides. The optical absorption uniformity throughout the device bulk was improved by designing the entry window to have a cylindrical shape and by using a square core optical fiber as an illumination source. In conclusion, the concept is experimentally validated on a vanadium-doped silicon carbide device that shows approximately four-fold improvement in responsivity compared to normal illumination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetostrictive Ultrasonic Waveguide Transducer for In-Pile Thermometry

Real-time and reliable temperature measurement on nuclear fuels is crucial for the safe operation of existing pressurized-water reactors and future advanced nuclear reactors. Magnetostrictive materials deform when subjected to a magnetic field or exhibit magnetization variation when stressed. Here, based on these properties, this study prototyped an ultrasonic thermometer (UT) consisting of a magnetostrictive waveguide, a dc coil providing appropriate magnetic biasing, and an ac coil generating an acoustic impulse and detecting the resulting acoustic echoes. By tracking the time of flight between the excitation pulse and the echoes, the UT can potentially detect nuclear fuel cladding temperature from a long distance. In this study, magnetostrictive iron–gallium alloys, or Galfenol, were selected as the waveguide due to their large magnetostriction, superior temperature survivability, excellent radiation resilience, and high mechanical robustness. A multiphysics finite-element model considering electrical, magnetic, and mechanical dynamics in the magnetostrictive UT was then developed. The model exhibited an error of 0.24% in time-of-flight simulation and, therefore, enabled computer-aided design and guided signal processing. Between room temperature and 120 °C, the new Galfenol-based UT exhibits a linear sensitivity of 162.8×10 ₋6 °C ₋1 , which is 51.7% higher than a previous magnetostrictive UT based on iron–cobalt–vanadium alloys.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Neutronics Analysis of Shielding Material Alternative to Tungsten Carbide in the FESS-FNSF Facility

Neutron transport calculations have been performed on advanced shielding materials. Metal hydrides and borohydrides were evaluated to find an alternative to tungsten carbide (WC), which is used in the in-vessel components. The study was conducted using a 22.5° sector and a detailed 360° geometry of the Fusion Energy System Studies-Fusion Nuclear Science Facility (FESS-FNSF) using OpenMC and FENDL-3.2b nuclear data library. Here, the neutronics analysis in this article was concentrated on calculating total nuclear (neutron and photon) heating at the magnet and the radiation damage of the inboard vacuum vessel (IBVV). For example, yttrium hydride (YH 2 ) and vanadium hydride (VH 2 ) showed lower radiation damage values compared to WC and other metals. Whereas alternative shielding materials did not show a significant change in the magnet nuclear heating.

36 MATERIALS SCIENCE↗