Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “threshold”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) peak intensity normalization for complex mixture analyses

Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) is a preferred technique for analyzing complex organic mixtures. Currently, there is no consensus normalization approach, nor an objective method for selecting one, for quantitative analyses of FT-ICR-MS data. We investigate a method to evaluate and score the amount of bias various normalization approaches introduce into the data. We evaluate the ability of the Statistical Procedure for the Analysis of Normalization Strategies (SPANS) to guide selection of appropriate normalization approaches for two different FT-ICR-MS datasets. Further, we test the robustness of SPANS results to changes in SPANS parameter values and assess the impact of using various normalization approaches on downstream statistical analyses. The normalization approach identified by SPANS differed for the two datasets. Normalization methods impacted the statistical significance of peaks differently, underscoring the importance of carefully evaluating potential methods. More consistent SPANS scores resulted when at least 120 significant peaks are used, where larger sets of peaks were obtained by increasing the p-value threshold. Interestingly, we show that Total Sum Scaling and highest peak normalization, used in previous studies, underperformed relative to SPANS-recommended normalization approaches. While there is no single, best normalization method for all datasets, SPANS provides a mechanism to identify an appropriate normalization method for analyzing FT-ICR-MS data quantitatively. As a result, the number of peaks used in the background distributions of SPANS contributes more significantly to the reproducibility of results than the p-value thresholds used to obtain those peaks.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Advanced wind turbine control development using field test analysis for generator overspeed mitigation

Abstract Turbulent and gusty wind conditions can cause generator overspeed peaks to exceed a threshold that then lead to wind turbine shutdowns, which then decrease the energy production of the wind turbines. We derive so‐called “gust measures” that predict when generator overspeed peaks may occur. These gust measures are then used to develop advanced controllers to mitigate generator overspeed peaks so that wind turbines can operate more robustly in difficult wind conditions without exceeding generator overspeed thresholds that would lead to turbine shutdown events. The advanced controllers are demonstrated in nonlinear aeroelastic simulations using the open‐source wind turbine simulation tool OpenFAST. To increase the realism of the simulations, they are run using field‐replicated wind conditions and a wind turbine model based on data from an experimental field campaign on a downscaled demonstrator of a novel extreme‐scale, two‐bladed, downwind rotor design.

17 WIND ENERGY↗
DOE OSTI2021

Exploring new physics with O(keV) electron recoils in direct detection experiments

Motivated by the recent XENON 1T results, we explore various new physics models that can be discovered through searches for electron recoils in O(keV)-threshold direct-detection experiments. First, we consider the absorption of axion-like particles, dark photons, and scalars, either as dark matter relics or being produced directly in the Sun. In the latter case, we find that keV mass bosons produced in the Sun provide an adequate fit to the data but are excluded by stellar cooling constraints. We address this tension by introducing a novel Chameleon-like axion model, which can explain the excess while evading the stellar bounds. We find that absorption of bosonic dark matter provides a viable explanation for the excess only if the dark matter is a dark photon or an axion. In the latter case, photophobic axion couplings are necessary to avoid X-ray constraints. Second, we analyze models of dark matter-electron scattering to determine which models might explain the excess. Standard scattering of dark matter with electrons is generically in conflict with data from lower-threshold experiments. Momentum-dependent interactions with a heavy mediator can fit the data with dark matter mass heavier than a GeV but are generically in tension with collider constraints. Next, we consider dark matter consisting of two (or more) states that have a small mass splitting. The exothermic (down)scattering of the heavier state to the lighter state can fit the data for keV mass splittings. Finally, we consider a subcomponent of dark matter that is accelerated by scattering off cosmic rays, finding that dark matter interacting though an O(100 keV)-mass mediator can fit the data. The cross sections required in this scenario are, however, typically challenged by complementary probes of the light mediator. Throughout our study, we implement an unbinned Monte Carlo analysis and use an improved energy reconstruction of the XENON 1T events.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Thermal energy of a charm-meson molecule in a pion gas

The thermal corrections to the propagator of a loosely bound charm-meson molecule in a pion gas are calculated to next-to-leading order in the heavy-meson expansion using a zero-range effective field theory. Ultraviolet divergences in the charm-meson-pair self energy are canceled by corrections to the charm-meson-pair contact vertex. Terms that are singular at the charm-meson-pair threshold can be absorbed into thermal corrections to the rest energies and kinetic masses of the charm-meson constituents. The remaining terms reduce to a thermal correction to the binding momentum that is proportional to the pion number density and suppressed by the pion/charm-meson mass ratio. The correction gives a tiny decrease in the binding energy of the charm-meson molecule relative to the charm-meson-pair threshold in the pion gas and a change in its thermal width that is small compared to the thermal widths of the charm-meson constituents. These results are encouraging for the prospects of observing X(3872) and $T$$^{+}_{cc}$ (3875) in the expanding hadron gas produced by heavy-ion collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Causality, unitarity, and the weak gravity conjecture

We consider the shift of charge-to-mass ratio for extremal black holes in the context of effective field theory, motivated by the Weak Gravity Conjecture. We constrain extremality corrections in different regimes subject to unitarity and causality constraints. In the asymptotic IR, we demonstrate that for any supersymmetric theory in flat space, and for all minimally coupled theories, logarithmic running at one loop pushes the Wilson coefficient of certain four-derivative operators to be larger at lower energies, guaranteeing the existence of sufficiently large black holes with Q > M. We identify two exceptional cases of nonsupersymmetric theories involving large numbers of light states and Planck-scale nonminimal couplings, in which the sign of the running is reversed, leading to black holes with negative corrections to Q/M in the deep IR, but argue that these do not rule out extremal black holes as the requisite charged states for the WGC. We separately show that causality and unitarity imply that the leading threshold corrections to the effective action from integrating out massive states, in any weakly coupled theory, can be written as a sum of squares and is manifestly positive for black hole backgrounds. Quite beautifully, the shift in the extremal Q/M ratio is directly proportional to the shift in the on-shell action, guaranteeing that these threshold corrections push Q > M in compliance with the WGC. Our results apply for black holes with or without dilatonic coupling and charged under any number of U(1)s.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Non-standard neutrino interactions in light mediator models at reactor experiments

Compared to other neutrino sources, the huge anti-neutrino fluxes at nuclear reactor based experiments empower us to derive stronger bounds on non-standard interactions of neutrinos with electrons mediated by light scalar/vector mediators. At neutrino energy around 200 keV reactor anti-neutrino flux is at least an order of magnitude larger compared to the solar flux. The atomic and crystal form factors of the detector materials related to the details of the atomic structure becomes relevant at this energy scale as the momentum transfers would be small. Non-standard neutrino-electron interaction mediated by light scalar/vector mediator arises naturally in many low-scale models. We also propose one such new model with a light scalar mediator. Here, we investigate the parameter space of such low-scale models in reactor based neutrino experiments with low threshold Ge and Si detectors, and find the prospect of probing/ruling out the relevant parameter space by finding the projected sensitivity at 90% confidence level by performing a $χ$ 2 -analysis. We find that a detector capable of discriminating between electron recoil and nuclear recoil signal down to a very low threshold such as 5 eV placed in reactor based experiment would be able to probe a larger region in parameter space compared to the previously explored region. A Ge (Si) detector with 10 kg-yr exposure and 1 MW reactor anti-neutrino flux would be able to probe the scalar and vector mediators with masses below 1 keV for coupling products $\sqrt{g_vg_e}$ ~ 1 × 10 -6 (9.5 × 10 -7 ) and 1 × 10 -7 (8 × 10 -8 ), respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Determining the leading-order contact term in neutrinoless double β decay

We present a method to determine the leading-order (LO) contact term contributing to the nn → ppe - e - amplitude through the exchange of light Majorana neutrinos. Our approach is based on the representation of the amplitude as the momentum integral of a known kernel (proportional to the neutrino propagator) times the generalized forward Compton scattering amplitude n ( p 1 ) n ( p 2 ) W + ( k ) → \( p\left({p}_1^{\prime}\right)p\left({p}_2^{\prime}\right){W}^{-}(k) \) , in analogy to the Cottingham formula for the electromagnetic contribution to hadron masses. We construct model-independent representations of the integrand in the low- and high-momentum regions, through chiral EFT and the operator product expansion, respectively. We then construct a model for the full amplitude by interpolating between these two regions, using appropriate nucleon factors for the weak currents and information on nucleon-nucleon ( NN ) scattering in the 1 S 0 channel away from threshold. By matching the amplitude obtained in this way to the LO chiral EFT amplitude we obtain the relevant LO contact term and discuss various sources of uncertainty. We validate the approach by computing the analog I = 2 NN contact term and by reproducing, within uncertainties, the charge-independence-breaking contribution to the 1 S 0 NN scattering lengths. While our analysis is performed in the \( \overline{\mathrm{MS}} \) scheme, we express our final result in terms of the scheme-independent renormalized amplitude \( {\mathcal{A}}_{\nu}\left(\left|\mathbf{p}\right|,\left|\mathbf{p}^{\prime}\right|\right) \) at a set of kinematic points near threshold. We illustrate for two cutoff schemes how, using our synthetic data for \( {\mathcal{A}}_{\nu } \) , one can determine the contact-term contribution in any regularization scheme, in particular the ones employed in nuclear-structure calculations for isotopes of experimental interest.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Semi-inclusive single-jet production in DIS at next-to-leading order in the Color Glass Condensate

Within the Color Glass Condensate (CGC) effective field theory, we derive the next-to-leading order (NLO) cross-section for the single-jet semi-inclusive cross-section in deep inelastic scattering (DIS) at small x, for both longitudinally and transversely polarized virtual photons. We provide analytic expressions, valid at finite N c and suitable for numerical evaluation, for both the cross-section differential in rapidity and transverse momentum and the cross-section differential in rapidity only. Our NLO formulae demonstrate that the very forward rapidity regime is plagued by large double logarithmic corrections coming from phase space constraints on soft gluons close to the kinematic threshold for jet production. A joint resummation of small-x and threshold logarithms at single logarithmic accuracy is proposed to remedy the instability of the cross-section in this regime. By integrating over the single-jet phase space, we recover known results for the NLO DIS structure functions at small x, previously obtained using the optical theorem.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

DK/Dπ scattering and an exotic virtual bound state at the SU(3) flavour symmetric point from lattice QCD

Abstract ElasticS-wave scattering of a charm meson with a light pseudoscalar meson inJ P = 0 + is investigated in the flavour$$ \overline{\textbf{3}} $$ 3 ¯ ,6and$$ \overline{\textbf{15}} $$ 15 ¯ sectors at the SU(3) f flavour point using lattice QCD, working on three volumes withm π ≈ 700 MeV. Large bases of interpolating operators are employed to extract finite-volume spectra, which are subsequently used with the Lüscher method to provide constraints on infinite-volume scattering amplitudes. Examining the singularities of the amplitudes, theS-wave amplitude in the flavour$$ \overline{\textbf{3}} $$ 3 ¯ sector is found to contain a deeply bound state, strongly coupled to elastic threshold, corresponding to the$$ {J}^P={0}^{+}\ {D}_{s0}^{\ast }(2317) $$ J P = 0 + D s 0 ∗ 2317 . In the exotic flavour6sector a virtual bound state is found at$$ \sqrt{s_{\textrm{pole}}} $$ s pole = 2510 – 2610 MeV, roughly 40 – 140 MeV below threshold, whereas the$$ \overline{\textbf{15}} $$ 15 ¯ channel shows weak repulsion.

Physics↗
DOE OSTI2022

Linear sigma dark matter

We present a model of self-interacting dark matter based on QCD-like theories and inspired by the proximity of a 0 (980 ± 20) to the $K\bar{K}$ (990) threshold. Dark matter is comprised of dark pions which self-scatter via the σ resonance close to the ππ threshold. While the linear sigma model serves as a qualitative guide, a fully unitary description of the scattering in the strongly coupled regime is given by effective range theory. The introduction of a kinetically mixed dark photon allows the dark pion to either freeze-out or -in. We study the viable parameter space which explains the observed relic abundance while evading all current constraints. Searches for dark matter self interactions at different scales, (in)direct detection signals, and (in)visibly-decaying dark photons will test this model in the near future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Extrapolating Contaminant Effects from Individuals to Populations: A Case Study on Nanoparticle Toxicity to Daphnia Fed Environmentally Relevant Food Levels

Ecological risk assessment (ERA) is charged with assessing the likelihood a chemical will have adverse environmental or ecological effects. When assessing the risk of a potential contaminant to biological organisms, ecologists are most concerned with the sustainability of populations of organisms, rather than protecting every individual. However, ERA most commonly relies on data on the effect of a potential contaminant on individuals because these experiments are more feasible than costly population-level exposures. In this work, we address the challenge of extrapolating these individual-level results to predict population-level effects. Previous per-capita population growth rate estimates calculated from individual-level exposures of Daphnia pulicaria to silver nanoparticles (AgNPs) at different food rations predict a critical daily food requirement for daphnid populations exposed to 200 μg/L AgNPs to avoid extinction. To test this, we exposed daphnid populations to the same AgNP concentration at three different food inputs, with the lowest ration close to the extinction threshold predicted from data on individuals. The two populations with the higher food inputs persisted, and the population with the lowest food input went extinct after 50 days but did persist through two generations. Further, we demonstrate that we can extrapolate between these levels of biological organization by parameterizing an individual-level biomass model with data on individuals’ response to AgNPs and using these parameters to predict the outcome for control and AgNP-exposed populations. Key to successful extrapolation is careful modeling of temporal changes in resource density, driven by both the experimental protocols and feedback from the consumer. The implication for ecotoxicology is that estimates of extinction thresholds based on studies of individuals may be reliable predictors of population outcomes, but only with careful treatment of resource dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Calculation of Dynamical Response Functions Using a Bound-State Method

Abstract We investigate a method to extract response functions (dynamical polarisabilities) directly from a bound-state approach applied to calculations of perturbation-induced reactions. The use of a square-integrable basis leads to a response in the form of a sum of $$\delta $$ δ functions. We integrate this over energy and fit a smooth function to the resulting stepwise-continuous one. Its derivative gives the final approximation to the physical response function. We show that the method reproduces analytical results where known, and analyse the details for a variety of models. We apply it to some simple models, using the stochastic variational method as the numerical method. Albeit we find that this approach, and other numerical techniques, have some difficulties with the threshold behavior in coupled-channel problems with multiple thresholds, its stochastic nature allows us to extract robust results even for such cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

SPLENDAQ: A Detector-Agnostic Data Acquisition System for Small-Scale Physics Experiments

Many scientific applications from rare-event searches to condensed matter system characterization to high-rate nuclear experiments require time-domain triggering on a raw stream of data, where the triggering is generally threshold-based or randomly acquired. When carrying out detector R &D, there is a need for a general data acquisition (DAQ) system to quickly and efficiently process such data. In the SPLENDOR collaboration, we are developing the Python-based SPLENDAQ package for this exact purpose—it offers two main features for offline analysis of continuous data: a threshold triggering algorithm based on the time-domain optimal filter formalism and an algorithm for randomly choosing nonoverlapping segments for noise measurements. Further, combined with the commercially available Moku platform, developed by Liquid Instruments, we have a full pipeline of event building off raw data with minimal setup. Here, we review the underlying principles of this detector-agnostic DAQ package and give concrete examples of its utility in various applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Exploring the Potential of Residual Impurities in Germanium Detectors for MeV-Scale Dark Matter Detection

Abstract The direct detection of MeV-scale dark matter (DM) particles hinges on achieving an exceptionally low-energy detection threshold. Germanium (Ge) detectors, meticulously tailored with precise impurity compositions, hold the potential to enhance sensitivity to energy levels below the sub-electronvolt (sub-eV) range. This study explores the behavior of residual impurities inherent to Ge detectors at helium temperatures, unveiling a captivating freeze-out phenomenon leading to the formation of excited localized states known as dipole states. Using compelling evidence from relative capacitance measurements obtained from two detectors, we elucidate the transition of impurity atoms from free charge states to these dipole states as the temperature drops from 11 to 6.5 K. Our investigation comprehensively covers the intricate formation of these dipole states in bothn-type andp-type impurities. Furthermore, we shed light on the electric field generated by these dipole states, revealing their ability to trap charges and facilitate the creation of cluster dipole states. Confirming findings from previous measurements, we establish that these excited dipole states exhibit a binding energy of less than 10 meV, offering an exceptionally low detection threshold for MeV-scale DM. Building upon this concept, we propose the development of a 1-kg Ge detector with internal charge amplification—an innovative approach poised to surpass electrical noise and enable the detection of MeV-scale DM with unprecedented sensitivity.

Physics↗
DOE OSTI2024

Haar-Like Wavelets on Hierarchical Trees

Here, discrete wavelet methods, originally formulated in the setting of regularly sampled signals, can be adapted to data defined on a point cloud if some multiresolution structure is imposed on the cloud. A wide variety of hierarchical clustering algorithms can be used for this purpose, and the multiresolution structure obtained can be encoded by a hierarchical tree of subsets of the cloud. Prior work introduced the use of Haar-like bases defined with respect to such trees for approximation and learning tasks on unstructured data. This paper builds on that work in two directions. First, we present an algorithm for constructing Haar-like bases on general discrete hierarchical trees. Second, with an eye towards data compression, we present thresholding techniques for data defined on a point cloud with error controlled in the $L$ $\infty$ norm and in a Hölder-type norm. In a concluding trio of numerical examples, we apply our methods to compress a point cloud dataset, study the tightness of the $L$ $\infty$ error bound, and use thresholding to identify MNIST classifiers with good generalizability.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Detecting anomalous packets in network transfers: investigations using PCA, autoencoder and isolation forest in TCP

Large-scale scientific workflows rely heavily on high-performance file transfers. These transfers require strict quality parameters such as guaranteed bandwidth, no packet loss or data duplication. To have successful file transfers, methods such as predetermined thresholds and statistical analysis need to be done to determine abnormal patterns. Network administrators routinely monitor and analyze network data for diagnosing and alleviating these, making decisions based on their experience. However, as networks grow and become complex, monitoring large data files and quickly processing them, makes it improbable to identify errors and rectify these. Abnormal file transfers have been classified by simply setting alert thresholds, via tools such as PerfSonar and TCP statistics (Tstat). This paper investigates the feasibility of unsupervised feature extraction methods for identifying network anomaly patterns with three unsupervised classification methods—principal component analysis, autoencoder and isolation forest. Here, we collect file transfer statistics from two experiment sets—synthetic iPerf generated traffic and 1000 Genome workflow runs, with synthetically introduced anomalies. Our results show that while PCA and a simple autoencoder finds it difficult to detect clusters, the tree-variant isolation forest is able to identify anomalous packets by breaking down TCP traces into tree classes early.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

A new method for predicting hurricane rapid intensification based on co-occurring environmental parameters

Abstract Tropical cyclones (TCs) that undergo Rapid Intensification (RI) can pose serious socioeconomic threats and can potentially result in major damaging impacts along coastal areas. Considering the complexity of various physical mechanisms that play a role in RI and its relatively low probability of occurrence, predicting RI remains a major operational challenge. In this study, we propose a simple deterministic binary classification model based on the co-occurrence of environmental parameters (MCE) to predict an RI event. More specifically, the model determines the possibility of RI based on a simple count of the number of environmental predictors deemed favorable and unfavorable. We compare our model results to logistic regression (LR) and decision tree (DT) models, well-trained using the same set of environmental predictors. Results reveal that at an RI threshold of 30 kt, the MCE exhibits a critical success index score of 0.233 which is 14% higher than DT and LR model performances. When tested at multiple RI thresholds, the MCE displays relatively higher skill scores across multiple metrics. By simultaneously evaluating the favorability of predictors, the MCE is able to comparatively reduce the number of false alarms predicted when certain predictors are unfavorable toward RI. Interpreting these model results to gain a physical understanding of how co-occurring environmental parameters can affect RI, we highlight future directions for using models based on the MCE approach to understand and predict TC RI as well as other meteorological extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Full-Strength Additive Manufacturing of Pure Aluminum Alloy 7075 Using Liquid Metal Jet Printing

Additive manufacturing (AM) of high-strength aluminum alloys can produce high-performance aerospace and biomedical parts with unique geometries and functions. However, many high-performance alloy systems such as AA 7075 pose challenges during AM due to thermal cycles that cause hot cracking, limiting AM to casting-friendly alloys. Stock AA 7075 alloy poses additional challenges due to the excessive growth of insoluble precipitates during casting and needs to be thermomechanically processed to obtain acceptable mechanical properties. Here, this work uses liquid metal jet printing to produce high-resolution pure AA 7075 parts at high strength (593 MPa) and ductility (10 pct), surpassing the specific strength of any type of steel. The parts are printed by depositing fine droplets on a high-temperature substrate that reduces cooling rates, preventing hot cracking. The results show that fully dense, crack-free parts can only be printed at substrate temperatures of 500 °C with a cooling rate threshold of < 2000 K/s to prevent cracking and < 500 K/s to eliminate porosity. The tensile strength, microhardness, and ductility of the parts matched or were beyond the wrought alloy specifications after heat treatment, possibly due to high solidification rates that produce finer insoluble precipitates. Our results indicate that many challenging high-performance alloy systems can now be 3D printed based on the critical thresholds for cooling rates using any AM method that can satisfy these conditions.

36 MATERIALS SCIENCE↗