Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “target”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Cross-section measurements and production of 72 Se with medium to high energy protons using arsenic containing targets

Here, experiments were performed to evaluate production of 72 Se, parent radionuclide of the positron emitter 72 As, at high energy at the Brookhaven Linac Isotope Producer (BLIP). Excitation functions for 75 As(p, xn) 72/75 Se in the 52-105 MeV energy range were measured by irradiating thin gallium arsenide (GaAs) wafers. Maximum cross section value for the nat As(p, 4n) 72 Se reaction in the energy range was 103 ± 9 mb at 52 ± 1 MeV. Production size GaAs and arsenic metal (As°) targets were irradiated with 136 μA and 165 μA beam current possessing an initial Linac energy of 117 MeV. A total of 3.77 ± 0.1 GBq (102 ± 3 mCi) of 72 Se was produced from a GaAs target at a calculated target entrance energy of 105.4 MeV, and 13.8 ± 0.3 GBq (373 ± 8 mCi) of 72 Se from an As° target at a calculated incident energy of 49.5 MeV irradiated for 116.5 h and 68.9 h, respectively.

43 PARTICLE ACCELERATORS↗

Architecture of the personnel protection systems for Spallation Neutron Source Second Target Station

The Oak Ridge National Laboratory (ORNL) is implementing a major upgrade to the Spallation Neutron Source (SNS) facility, encompassing the addition of the Second Target Station (STS). Preliminary design reviews have been conducted on several STS Personnel Protection Systems (PPS). The reviews focused primarily on the integration with the existing SNS PPS, the new proton transport tunnel, and the target areas. Development of the PPS is ongoing, to ensure a coherent safety system with the mission of protecting users and workers from prompt radiation hazards while providing high beam availability to operations. The STS PPS element in the Integrated Control System (ICS) is a facility-wide system composed of multiple safety subsystems, including the Ring to Second Target (RTST) beam transport tunnel, Target, Bunker and Instruments. Personnel working in all these geographic areas are protected by modular reliable PPS solutions. The safety system enforces access controls, radiation monitoring, beam destination control, and application of critical device inhibit upon detection of abnormal condition. It uses well-documented processes, Common Industrial Protocol (CIP) safety, pulsed test, and redundancy to achieve the desired Safety Integrity Level (SIL). This paper gives an architectural overview of the STS PPS and a detailed safety plan for the SNS facility, addressing safety solutions and human factors.

Michaelides, Tommy [ORNL] (ORCID:0000000190499869)↗

Diffusion bonding of tungsten-vanadium-zirconium using vacuum hot pressing for the development of a low decay heat cladding solution for tungsten spallation targets

Tantalum has been used as cladding material for water-cooled solid tungsten targets at many leading spallation neutron production facilities thanks to its high neutron yield, manageable radiation damage behavior, and excellent corrosion/erosion resistance in radiation environments. However, from a safety hazard perspective, thermal neutron capture of tantalum in spallation environments causes a high specific decay heat in the target volume, which often becomes a limiting factor in increasing the beam power on the target. In this paper, we studied vacuum hot pressing (VHP) parameters to diffusion bond zirconium to tungsten to explore the feasibility of using zirconium alloys as an alternative cladding material to tantalum. Zirconium alloys have long been used as cladding material for early generation solid spallation targets, and nuclear fuel rods. In spallation environments zirconium has significantly lower decay heat with shorter decay time compared to tantalum. The hot isostatic pressing (HIP) of zirconium and tungsten is known to produce limited bonding quality due to the formation of the brittle ZrW2 intermetallic layer. To overcome this problem, placing a vanadium interlayer between tungsten and zirconium has been proposed by exploring parameter space in binary alloy phase diagrams. Under the VHP conditions, 860 ◦C at 70 MPa for 4 hours, Zr-V and V-W showed good diffusion bonding, which demonstrates the feasibility of a single step HIP process to make the zirconium alloy clad tungsten spallation volumes.

Lee, Yong Joong↗

Machine learning at the Spallation Neutron Source accelerator and target

We describe the ongoing efforts to apply Machine Learning techniques to improve the performance of our accelerator and target. Specially, we are looking to minimize halo beam losses in the absence of a proper physics model, automatically detect and log anomalies in the target support systems such as cooling, and detect and prevent errant beam pulses in the linac. We also describe the infrastructure we use to acquire and stream data to the GPU cluster for training, our code development cycle, and edge computing for model inference. To minimize halo beam losses, we use a Reinforcement Learning technique tested on a virtual accelerator. The target anomaly detection is trained on archived data using incomplete physics models and is made part of the existing target reporting system. The errant beam prevention analyzes beam current and beam phase waveforms as well as accelerator configuration data to predict errant pulses. We also develop continual learning to adapt to changes in the accelerator.

Accelerator Physics↗

Radioisotope production at the Spallation Neutron Source: Design concept of experimental target station

Completion of the Proton Power Upgrade Project for the Spallation Neutron Source (SNS) accelerator at Oak Ridge National Laboratory opens an opportunity to utilize reserve beam power of more than 100 kW for applications beyond neutron production. One of these applications is the production of critical radionuclides. To demonstrate the feasibility of using the reserve beam power to produce radioisotope at SNS, a design concept of a small-scale experimental target station in the Linac Dump area has been developed. This experimental facility will provide isotope yield benchmarking data using protons in the GeV range. It will also enable additional research and development in isotope handling and radiochemical separation. The target station consists of a target module enclosed in a vessel and concrete shielding. Particle transport calculations and thermo-mechanical simulations are used to determine beam parameters, decay time, isotope yield, shielding dimensions, and target design parameters. Calculations verified that the irradiated capsule can be handled manually using hands-off tools and transported to a hot cell in a shielded container for post-irradiation characterizations.

Lee, Yong Joong [ORNL] (ORCID:0000000298381723)↗

Ultra-High-Contrast Laser Acceleration of Relativistic Electrons in Solid Targets

The cone-guided fast ignition approach to Inertial Con nement Fusion requires laser-accelerated relativistic electrons to deposit kilojoules of energy within an imploded fuel core to initiate fusion burn. One obstacle to coupling electron energy into the core is the ablation of material, known as preplasma, by laser energy proceeding nanoseconds prior to the main pulse. This causes the laser-absorption surface to be pushed back hundreds of microns from the initial target surface; thus increasing the distance that electrons must travel to reach the imploded core. Previous experiments have shown an order of magnitude decrease in coupling into surrogate targets when intentionally increasing the amount of preplasma. Additionally, for electrons to deposit energy within the core, they should have kinetic energies on the order of a few MeV, as less energetic electrons will be stopped prior to the core and more energetic electrons will pass through the core without depositing much energy. Thus a quantitative understanding of the electron energy spectrum and how it responds to varied laser parameters is paramount for fast ignition. For the rst time, this dissertation quantitatively investigates the acceleration of electrons using an ultra-high-contrast laser. Ultra-high-contrast lasers reduce the laser energy that reaches the target prior to the main pulse; drastically reducing the amount of preplasma. Experiments were performed in a cone-wire geometry relevant to fast ignition. These experiments irradiated the inner-tip of a Au cone with the laser and observed electrons that passed through a Cu wire attached to the outer-tip of the cone. The total emission of K x-rays is used as a diagnostic to infer the electron energy coupled into the wire. Imaging the x-ray emission allowed an e ective path-length of electrons within the wire to be determined, which constrained the electron energy spectrum. Experiments were carried out on the ultra-high-contrast Trident laser at Los Alamos National Laboratory and at the low-contrast Titan laser at Lawrence Livermore National Laboratory. The targets were irradiated using these 1.054 μm wavelength lasers at intensities from 1019 to 1020 W/cm2. The coupling of energy into the Cu wire was found to be 2.7x higher when the preplasma was reduced using high-contrast. Additionally, higher laser intensity elongated the e ective path-length of electrons within the wire, indicating that their kinetic energy was higher.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Omen: identifying potential spear-phishing targets before the email is sent.

We present the results of a two year project focused on a common social engineering attack method called "spear phishing". In a spear phishing attack, the user receives an email with information specifically focused on the user. This email contains either a malware-laced attachment or a link to download the malware that has been disguised as a useful program. Spear phishing attacks have been one of the most effective avenues for attackers to gain initial entry into a target network. This project focused on a proactive approach to spear phishing. To create an effective, user-specific spear phishing email, the attacker must research the intended recipient. We believe that much of the information used by the attacker is provided by the target organization's own external website. Thus when researching potential targets, the attacker leaves signs of his research in the webserver's logs. We created tools and visualizations to improve cybersecurity analysts' abilities to quickly understand a visitor's visit patterns and interests. Given these suspicious visitors and log-parsing tools, analysts can more quickly identify truly suspicious visitors, search for potential spear-phishing targeted users, and improve security around those users before the spear phishing email is sent.

Wendt, Jeremy Daniel.↗

Fusion Application Targets

Complex target structures are necessary to take full advantage of the unique laboratory environment created by inertial confinement fusion experiments. For example, uses-ofignition targets that contain a thin layer of a low density nanoporous material inside a spherical ablator shell allow placing dopants in direct contact with the DT fuel. The ideal foam for this application is a low-density hydrocarbon foam that is strong enough to survive wetting with cryogenic hydrogen, and low enough in density (density less than ~30 mg/cc) to not reduce the yield of the target. Here, we discuss the fabrication foamlined uses-of-ignition targets, and the development of low-density foams that can be used for this application.

36 MATERIALS SCIENCE↗

Nuclear Security: Target Analysis

This objectives of this session were to understand the basic steps of target identification; describe the SNRI targets in detail; characterize specific targets with more detail; prioritize targets based on guidance documents; understand the graded safeguards concept; identify roll up and understand why it is a concern; and recognize the category for different materials.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

NREL 2012 Achievement of Ethanol Cost Targets: Biochemical Ethanol Fermentation via Dilute-Acid Pretreatment and Enzymatic Hydrolysis of Corn Stover

For the DOE Bioenergy Technologies Office, the annual State of Technology (SOT) assessment is an essential activity for quantifying the benefits of biochemical platform research. This assessment has historically allowed the impact of research progress achieved through targeted Bioenergy Technologies Office funding to be quantified in terms of economic improvements within the context of a fully integrated cellulosic ethanol production process. As such, progress toward the ultimate 2012 goal of demonstrating cost-competitive cellulosic ethanol technology can be tracked. With an assumed feedstock cost for corn stover of $\$$58.50/ton this target has historically been set at $\$$1.41/gal ethanol for conversion costs only (exclusive of feedstock) and $\$$2.15/gal total production cost (inclusive of feedstock) or minimum ethanol selling price (MESP). This year, fully integrated cellulosic ethanol production data generated by National Renewable Energy Laboratory (NREL) researchers in their Integrated Biorefinery Research Facility (IBRF) successfully demonstrated performance commensurate with both the FY 2012 SOT MESP target of $\$$2.15/gal (2007$\$$, $\$$58.50/ton feedstock cost) and the conversion target of $\$$1.41/gal through core research and process improvements in pretreatment, enzymatic hydrolysis, and fermentation.

09 BIOMASS FUELS↗

Final FY-12 Progress Report on the Cleanup of Irradiated 130 g-U/L Uranyl Sulfate SHINE Target Solutions

During Fiscal Year 2012 (FY-12), Argonne National Laboratory (Argonne) submitted a series of letter reports as the process for periodic cleanup of the SHINE target solution was first down-selected from a variety of options and then developed. These reports, in order of submission, were as follows: Use of Uranyl Peroxide Precipitation as a Means to Clean up Irradiated Uranyl Sulfate Target Solutions (February 28, 2012); UREX Flowsheet for Cleanup of a Spent 130 g-U/L Uranyl Sulfate SHINE Target Solution (March 29, 2012); Addendum to the Letter Report UREX Flowsheet for Cleanup of a Spent 130 g-U/L Uranyl Sulfate SHINE Target Solution of March 29, 2012 (May 18, 2012); and Centrifugal Contactor Operations for UREX Process Flowsheet (May 21, 2012). Results on cleanup development were also presented at the SHINE technical meeting on August 23, 2012. This report will present results from two experiments; the results of the first experiment were presented at that meeting, and the second experiment was performed after the meeting.

Bowers, Delbert↗

Study of Plasma Liner Driven Magnetized Target Fusion Via Advanced Simulations

The feasibility of the plasma liner driven Magnetized Target Fusion (MTF) via terascale numerical simulations will be assessed. In the MTF concept, a plasma liner, formed by merging of a number (60 or more) of radial, highly supersonic plasma jets, implodes on the target in the form of two compact plasma toroids, and compresses it to conditions of the fusion ignition. By avoiding major difficulties associated with both the traditional laser driven inertial confinement fusion and solid liner driven MTF, the plasma liner driven MTF potentially provides a low-cost and fast R&D path towards the demonstration of practical fusion energy. High fidelity numerical simulations of full nonlinear models associated with the plasma liner MTF using state-of-art numerical algorithms and terascale computing are necessary in order to resolve uncertainties and provide guidance for future experiments. At Stony Brook University, we have developed unique computational capabilities that ideally suite the MTF problem. The FronTier code, developed in collaboration with BNL and LANL under DOE funding including SciDAC for the simulation of 3D multi-material hydro and MHD flows, has beenbenchmarked and used for fundamental and engineering problems in energy science applications. We have performed 3D simulations of converging supersonic plasma jets, their merger and the formation of the plasma liner, and a study of the corresponding oblique shock problem. We have studied the implosion of the plasma liner on the magnetized plasma target by resolving Rayleigh-Taylor instabilities in 2D and 3D and other relevant physics and estimate thermodynamic conditions of the target at the moment of maximum compression and the hydrodynamic efficiency of the method.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Targeted Therapy for Melanoma

The research project, entitled ”Targeted Therapy for Melanoma,” was focused on investigating the use of kidney protection measures to lower the non-specific kidney uptake of the radiolabeled Pb-DOTA-ReCCMSH peptide. Previous published work demonstrated that the kidney exhibited the highest non-target tissue uptake of the 212Pb/203 Pb radiolabeled melanoma targeting peptide DOTA-ReCCMSH. The radiolabeled alpha-melanocyte stimulating hormone (α-MSH) peptide analog DOTA-Re(Arg 11 )CCMSH, which binds the melanocortin-1 receptor over-expressed on melanoma tumor cells, has shown promise as a PRRT agent in pre-clinical studies. High tumor uptake of 212 Pb labeled DOTA-Re(Arg 11 )CCMSH resulted in tumor reduction or eradication in melanoma therapy studies. Of particular note was the 20-50% cure rate observed when melanoma mice were treated with alpha particle emitter 212 Pb. However, as with most PRRT agents, high radiation doses to the kidneys where observed. To optimize tumor treatment efficacy and reduce nephrotoxicity, the tumor to kidney uptake ratio must be improved. Strategies to reduce kidney retention of the radiolabeled peptide, while not effecting tumor uptake and retention, can be broken into several categories including modification of the targeting peptide sequence and reducing proximal tubule reabsorption.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Assessment of candidates for target window material in accelerator-driven molybdenum-99 production

NorthStar Medical Technologies is pursuing production of an important medical isotope, Mo-99, through a photo-nuclear reaction of a Mo-100 target using a high-power electron accelerator. The current target utilizes an Inconel 718 window. The purpose of this study was to evaluate other candidate materials for the target window, which separates the high-pressure helium gas inside the target from the vacuum inside the accelerator beamline and is subjected to significant stress. Our initial analysis assessed the properties (density, thermal conductivity, maximum stress, minimum window thickness, maximum temperature, and figure of merit) for a range of materials, from which the three most promising were chosen: Inconel 718, 250 maraging steel, and standard-grade beryllium. These materials were subjected to further analysis to determine the effects of thermal and mechanical strain versus beam power at varying thicknesses. Both beryllium and the maraging steel were calculated to withstand more than twice as high beam power than Inconel 718.

36 MATERIALS SCIENCE↗

Nuclear Targeting Terms for Engineers and Scientists

The Department of Defense has a methodology for targeting nuclear weapons, and a jargon that is used to communicate between the analysts, planners, aircrews, and missile crews. The typical engineer or scientist in the Department of Energy may not have been exposed to the nuclear weapons targeting terms and methods. This report provides an introduction to the terms and methodologies used for nuclear targeting. Its purpose is to prepare engineers and scientists to participate in wargames, exercises, and discussions with the Department of Defense. Terms such as Circular Error Probable, probability of hit and damage, damage expectancy, and the physical vulnerability system are discussed. Methods for compounding damage from multiple weapons applied to one target are presented.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Double-shell target fabrication workshop-2016 report

On June 30, 2016, over 40 representatives from Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), General Atomics (GA), Laboratory for Laser Energetics (LLE), Schafer Corporation, and NNSA headquarter attended a double-shell (DS) target fabrication workshop at Livermore, California. Pushered-single-shell (PSS) and DS metalgas platforms potentially have a large impact on programmatic applications. The goal of this focused workshop is to bring together target fabrication scientists, physicists, and designers to brainstorm future PSS and DS target fabrication needs and strategies. This one-day workshop intends to give an overall view of historical information, recent approaches, and future research activities at each participating organization. Five topical areas have been discussed that are vital to the success of future DS target fabrications, including inner metal shells, foam spheres, outer ablators, fill tube assembly, and metrology.

36 MATERIALS SCIENCE↗

Targeting Maturation and Quality Control of Photosynthetic Membrane Proteins

Plsp1 is a type I signal peptidase that is responsible for removing the targeting signal peptide from passenger proteins upon their delivery to the thylakoid lumen. Plsp1 is itself a resident of the thylakoid membrane, with a single membrane anchor and the catalytic domain facing the lumen. Work to uncover the targeting mechanism for this protein has been underway in the Inoue lab from the previous DOE funding period has established that Plsp1 is targeted at the thylakoid by the Sec1 translocase, and that it passes through a high molecular weight intermediate in the stroma en route to the thylakoid membrane. During this funding period we have demonstrated by MS/MS of immunoprecipitated samples that the high molecular weight complex containing Plsp1 in the stroma contains primarily the α1 and β1 forms of Cpn60 in approximately equal amounts. Mixing experiments with overexpressed purified proteins have reproduced the Cpn60/Plsp1 complex. Surprisingly, the co-chaperonins Cpn10 and Cpn20 were not detected in the immunoprecipitated sample, even though they are able to bind to the Cpn60/Plsp1 complex formed in mixing experiments. We have further confirmed that the addition of purified stromal cpSecA1 results in a decrease in the amount of Plsp1 successfully incorporated into the thylakoid membrane. We are currently working on experiments to describe the conditions for the handoff between Cpn60 and cpSec1 in the stroma prior to membrane targeting. The structure of Plsp1 can be inferred by threading its sequence onto the structure of its E. coli homologue LepB to contain a single membrane anchor followed by a soluble structure consisting of ten β strands. In the last DOE funding period it was determined that the transmembrane domain not only acts as the membrane anchor, but probably mediates the interaction with cpSecA1. We have now determined that the binding to Cpn60 is likely mediated by β strands 1 and 2. What is the mechanism and significance of oxidative folding of Plsp1? It was found during the last DOE funding period that Plsp1 purified after overexpression in E. coli loses its peptidase activity upon reduction of its conserved cysteines. We have now determined that Plsp1 undergoes a measurable conformational change upon reduction, both by monitoring susceptibility to protease and by native tryptophan fluorescence. We have also shown that Plsp1 is at least partly, and likely completely, oxidized in the thylakoid lumen. While these results were not unexpected, experiments on Plsp1 in vivo were completely surprising. We have known for years (from work conducted with prior DOE funding) that a Plsp1 knockout is embryo lethal. Accordingly, given that reduction of the isolated protein inactivates it, we expected that plants in which one or both of the cysteine pair were mutated would also lead to a severe mutant phenotype. This was not observed, and in fact, these mutants complemented fully the plsp1 plants. This lead to the hypothesis that either association with an interacting protein or with the membrane preserves Plsp1structure even when the disulfides are reduced. Work performed in the last DOE funding cycle revealed that Pgrl1, a protein reportedly involved in cyclic electron flow, interacts stably with Plsp1. However, the Plsp1 cysteine-less mutants are still able to compliment the plsp1 mutant even in the pgrl1 knockout mutant background. We have also found that in vitro activity of Plsl1 is not abolished by reduction in thylakoids that have been permeabilized by low concentrations of detergent, whereas the activity of fully extracted protein is. This points to membrane association as the condition important to activity, and by extension, structure preservation. We are presently working to isolate Plsp1 in a lipid nanodisk to test this hypothesis.

59 BASIC BIOLOGICAL SCIENCES↗

NIF Target Alignment System, TAS 2

The National Ignition Facility (NIF) is the world’s largest, most powerful and energetic laser, composed of 192 laser beams. The beams are used to complete high energy density (HED) physics by compressing targets on the order of 2 mm in diameter down to ascale of ~25 microns. The reaction results in high temperatures and pressures, creating fusion reactionssimilar to those within the sun. The NIF facility has 2 main purposes: to provide a platform to complete unique scientific experiments; and to improve shot performance on high neutron yield targets, with the goal of demonstrating laboratory generated fusion ignition. Fusion ignition is the condition in which the target releases more neutron energy than is put into the target in laser energy – this can only occur if the nuclear burn becomes self-sustaining for a short period of time.

42 ENGINEERING↗