Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface topography”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Local Anodic Oxidation of Graphene Layers on SiC

A method of local anodic oxidation has been used to obtain graphene-oxide regions on SiC. The change of the surface properties was confirmed by atomic-force microscopy and Raman spectroscopy. Experimental data were obtained on the conductivity, potential, and topography of the oxidized regions. It was shown that the oxidation leads to a rise in the surface potential. A relationship was found between oxidation parameters, such as the scanning velocity and the probe voltage. The method of local anodic oxidation was used to obtain by lithography an ~20-nm-wide nanoribbon and an ~10-nm-wide nanoconstriction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The {beta} integrins and cytoskeletal nanoimprinting

'Nanoimprinting', whereby topographical features are directly imprinted on or in cells, has recently been documented. The mechanism(s) underlying this may explain the cause of cell behavioural alterations as a result of contact with nanotopography. Integrin-mediated cell-substrate adhesions are likely to play a key role in this phenomenon due to their involvement in bidirectional signalling between extra- and intracellular environments. We describe the effects of blocking {beta}{sub 1} and {beta}{sub 3} integrin subunits on the ability of the cytoskeleton to conform to colloidal-derived nanotopography. Scanning electron and atomic force microscopy were used to characterise substrate nanofeatures. Nanofeature circularity was calculated relative to substrate topography and the cytoskeleton of cells cultured on patterned and planar surfaces in the presence/absence of {beta}{sub 1}/{beta}{sub 3} integrin antibody. Cross-correlation investigations were similarly conducted by producing a target image relative to individual topographical nanofeatures. This was then compared with cytoskeletal patterning in the presence/absence of {beta} integrin antibodies. Inhibiting the {beta}{sub 1} subunits increased the ability of fibroblasts to nanoimprint, while inhibiting the {beta}{sub 3} subunit reduced nanoimprinting of the topography to the cell. Fibroblasts cultured on planar substrates also expressed some features sharing similarities with those observed in cells on the nanotopography, indicating an inherent cytoskeletal nanopatterning at high resolution.

60 APPLIED LIFE SCIENCES↗

Evapotranspiration and runoff from large land areas: Land surface hydrology for atmospheric general circulation models

A land surface hydrology parameterization for use in atmospheric GCM's is presented. The parameterization incorporates subgrid scale variability in topography, soils, soil moisture and precipitation. The framework of the model is the statistical distribution of a topography-soils index, which controls the local water balance fluxes, and is therefore taken to represent the large land area. Spatially variable water balance fluxes are integrated with respect to the topography-soils index to yield our large topography-soils distribution, and interval responses are weighted by the probability of occurrence of the interval. Grid square averaged land surface fluxes result. The model functions independently as a macroscale water balance model. Runoff ratio and evapotranspiration efficiency parameterizations are derived and are shown to depend on the spatial variability of the above mentioned properties and processes, as well as the dynamics of land surface-atmosphere interactions.

Famiglietti, J. S.↗

Ice Thicknesses and Driving Stresses of Greenland Ice Sheet

Surface elevations from satellite radar altimetry (Geosat, Seasat, and ERS-1) and bedrock topography from airborne radar sounding (Simon Ekholm's Danish compilation) are combined to derive maps of the driving stresses in the Greenland ice sheet. The stress vector, tau = rho g h sin(alpha), is calculated using surface slope vectors, alpha, from surface elevations and ice thicknesses, h, from the difference between surface and basal elevations. Since the 5-km scale of the surface slope is only about 2 times the ice thickness, the stress maps show spatial variations indicative of longitudinal stress gradients associated with topographic undulations. Values of alpha generally vary from near zero at the ice divides to maxima values around 120 kpa, returning to near zero in a narrow band at the edges. The distribution of alpha's peaks at 60 kpa with an approximate sigma of +/- 20 kpa. Areas of very low alpha near the origin of the northeast ice stream may indicate small sub-glacial lakes. The profile of alpha, down the ice stream from near the ice divide, increases to a maximum of about 120 kpa near the margin, which is characteristic of East Antarctic outlet glaciers and in contrast to West Antarctic ice streams where alpha has maximum values 400 to 500 km inland from the grounding lines. Overall distributions of alpha values are compared with those for the Antarctic ice sheet and the Mars Northern ice cap.

Zwally, H. J.↗

Coupled land surface/hydrologic/atmospheric models

The topics covered include the following: prototype land cover characteristics data base for the conterminous United States; surface evapotranspiration effects on cumulus convection and implications for mesoscale models; the use of complex treatment of surface hydrology and thermodynamics within a mesoscale model and some related issues; initialization of soil-water content for regional-scale atmospheric prediction models; impact of surface properties on dryline and MCS evolution; a numerical simulation of heavy precipitation over the complex topography of California; representing mesoscale fluxes induced by landscape discontinuities in global climate models; emphasizing the role of subgrid-scale heterogeneity in surface-air interaction; and problems with modeling and measuring biosphere-atmosphere exchanges of energy, water, and carbon on large scales.

Pielke, Roger↗

Linking topographic variation in belowground C processes with hydrological processes to improve Earth system models

The effects of topography on belowground processes were investigated at the Susquehanna-Shale Hills Critical Zone Observatory in central Pennsylvania. Hill slope had stronger effects on aboveground biomass allocation than belowground allocation. Hills slope position affected the respiratory response to temperature with a 10-degree increase having more influence in slope positions characterized by higher moisture. A spatial distributed forest model that includes nitrogen transport was developed from a 1-dimensional biogeochemical model and a spatially distributed land surface hydrological model. This model can simulate the impact of topography-driven spatially-distributed soil moisture, soil temperature, solar radiation, and soil mineral N on watershed carbon processes. This project helped in the training of four PhD students.

54 ENVIRONMENTAL SCIENCES↗

Analysis of a general circulation model. II - Distribution of kinetic energy in the South Atlantic and Kuroshio/Oyashio systems

It was found (Garzoli et al., 1992) that the general circulation model of Semtner and Chervin (1992) provides accurate descriptions of the Brazil-Malvinas and the Kuroshio/Oyashio confluence systems, except for the fact that the model prediction shows less variability than that present in observations. This paper investigates the problem of model variability by analyzing the mean and the eddy kinetic energy from the model and comparing the values with the Geosat altimeter observations for the South Atlantic Ocean and for the Kuroshio system. It is found that, while the model shows transient eddy activity in the areas that overlap the Geosat observations, the energy level of the model transient motions is considerably smaller following an arch along the bottom topography. The same was found from the comparisons made with values obtained from FGGE and surface drifters. It is suggested that the model is poorly resolving instabilities in the confluence front, and is not resolving other transients appearing in regions of marked topography.

Garraffo, Zulema↗

Earth-based measurement of lunar topography using delayed radar interferometry

Radar interferometry has been applied to radar mapping of the surface of Venus to resolve the ambiguity in the backscatter from the areas with the same delay-Doppler coordinates. For observations of the Moon these points are usually isolated by the small extent of the area illuminated by the radar beam so that interferometric techniques can be used to determine a third dimension to the location of the radar backscatter. Recent observations of Sinus Iridum (41.5 deg N, 31.0 deg W) using the Arecibo Observatory S-Band radar system (12.6 cm wavelength) in Apr. and Aug. 1992 have yielded a pair of images viewed with a very small 0.0420 deg difference in incidence angle. These images can be used as a delay interferometric pair and have been correlated to generate phase fringes that are related to topography. The spatial resolution of the images are 18 m in delay and 33 m in cross range (Doppler). The anticipated topographic resolution once the phase fringes have been unwrapped is approximately +/- 10 m.

Stacy, N. J. S.↗

Liquid-crystal-mediated self-assembly at nanodroplet interfaces

Technological applications of liquid crystals have generally relied on control of molecular orientation at a surface or an interface. Such control has been achieved through topography, chemistry and the adsorption of monolayers or surfactants. The role of the substrate or interface has been to impart order over visible length scales and to confine the liquid crystal in a device. In this work, we report results from a computational study of a liquid-crystal-based system in which the opposite is true: the liquid crystal is used to impart order on the interfacial arrangement of a surfactant. Recent experiments on macroscopic interfaces have hinted that an interfacial coupling between bulk liquid crystal and surfactant can lead to a two-dimensional phase separation of the surfactant at the interface, but have not had the resolution to measure the structure of the resulting phases. To enhance that coupling, we consider the limit of nanodroplets, the interfaces of which are decorated with surfactant molecules that promote local perpendicular orientation of mesogens within the droplet. In the absence of surfactant, mesogens at the interface are all parallel to that interface. As the droplet is cooled, the mesogens undergo a transition from a disordered (isotropic) to an ordered (nematic or smectic) liquid-crystal phase. As this happens, mesogens within the droplet cause a transition of the surfactant at the interface, which forms new ordered nanophases with morphologies dependent on surfactant concentration. Such nanophases are reminiscent of those encountered in block copolymers, and include circular, striped and worm-like patterns.

36 MATERIALS SCIENCE↗

Planetary origin, evolution, and structure

Three areas of recent and ongoing research are presented. The first area is giant planet heatflows. Conventional wisdom attributes the heatflow of the giant planets to the gradual loss of primordial heat, except in the case of Saturn where helium separation is evidently occurring. There are two problems with this picture: (1) the observed helium abundance of Saturn's atmosphere is so low that Jupiter must also be differentiating helium since its internal entropy cannot be much higher than Saturn; and (2) the heatflow of Neptune (not to mention Uranus) is too high to be consistent with adiabatic cooling from an initial hot state. A self-consistent solution to these two problems is presented. The second area covered is that of the despinning protogiant planets. Modeling of the possible despinning of these protoplanets by hydromagnetic torques was performed and the model results are discussed. The third area covered is how Titan hides its ocean. Until recently, the favored picture of Titan's surface was a roughly kilometer-thick ethane/methane ocean, presumably global in extent with at most a few outcroppings of dry land. The depth of the ocean is well constrained by observed atmospheric properties, and the constraints on subaerial topography are obtained indirectly from tidal considerations. A different picture of Titan's surface was pursued which was motivated by the perspective that methane on Titan should more properly be considered as a magmatic fluid. In this picture, methane is stored subsurface in magma chambers fed from deep-seated sources of methane, most probably due to the high pressure breakdown of methane clathrate. Other aspects of this model of Titan are presented.

Stevenson, David J.↗

Scanning tunneling microscopy characterization of the geometric and electronic structure of hydrogen-terminated silicon surfaces

Scanning tunneling microscopy (STM) methods are used to characterize hydrogen-terminated Si surfaces prepared by a novel method. The surface preparation method is used to expose the Si-SiO2 interface. STM images directly reveal the topographic structure of the Si-SiO2 interface. The dependence of interface topography on oxide preparation conditions observed by STM is compared to the results of conventional surface characterization methods. Also, the electronic structure of the hydrogen-terminated surface is studied by STM spectroscopy. The near-ideal electronic structure of this surface enables direct tunnel spectroscopy measurements of Schottky barrier phenomena. In addition, this method enables probing of semiconductor subsurface properties by STM.

Kaiser, W. J.↗

Three-dimensional numerical simulation of thermal tides in the Martian atmosphere

Analysis of the Mariner 9 IRIS and Viking Orbiter IRTM temperature data and of the time series of surface pressure from the Viking landers has indicated that atmospheric thermal tides are a significant component of the martian general circulation. Classical tidal theory, considering only the Sun synchronous components, has been shown to at least roughly account for the amplitudes of the observed diurnal and semidirunal surface pressure oscillations. In particular, Zurek and Leovy have demonstrated that classical tidal theory can reproduce the observed dependence of the strength of the semidiurnal tide on aerosol optical depth. The high-amplitude topograph of Mars, however, can cause longitudinal distortions in the thermotidal forcing, leading to additional tidal modes that are not Sun synchronous. In particular, observation and theory have suggested the likely presence of a diurnal, zonal wavenumber-1 K wave. Hamilton and Garcia noted that the wavenumber-1 K normal mode has a period of close to 24 hr and may be detectable in surface pressure observations. Zurek has discussed the possibility of this mode being resonantly excited for various atmospheric temperature studies. The semidiurnal wavenumber-2 K mode, with roughly a 12-hr period, could also be resonantly excited. A numerical model with finite amplitude topography and a self-consistent thermotidal forcing resulting from the daily heat flux at the surface and atmospheric absorption of solar radiation by aerosols is used here to explore the influence of topography on martian thermal tides and to examine the possibility of Kelvin wave resonance.

Wilson, R. John↗

Venus geology

The Magellan mission to Venus is reviewed. The scientific investigations conducted by 243-day cycles encompass mapping with a constant incidence angle for the radar, observing surface changes from one cycle to the next, and targeting young-looking volcanos. The topography of Venus is defined by the upper boundary of the crust and upwelling from lower domains. Tectonic features such as rift zones, linear mountain belts, ridge belts, and tesserae are described. The zones of tesserae are unique to the planet. Volcanism accounts for about 80 percent of the observed surface, the remainder being volcanic deposits which have been reworked by tectonism or impacts. Magellan data reveal about 900 impact craters with flow-like ejecta resulting from the fall of meteoroids. It is concluded that the age of the Venusian surface varies between 0 and 800 million years. Tectonic and volcanic activities dominate the formation of the Venus topography; such processes as weathering and erosion are relatively unimportant on Venus.

Mclaughlin, W. I.↗

Topographic Controls on the Distribution of Summer Monsoon Precipitation over South Asia

In this work, we use a high-resolution (9 km) one-way nested regional climate modeling framework to systematically evaluate individual and aggregate roles of various components of topography in the precipitation distribution during South Asian Summer Monsoon (SASM). While it is not the arrival but the north-northwestward extent of summer monsoon precipitation that is regulated by the presence of elevated surfaces in South Asia, both the thermal and mechanical topographic forcing play a role. Topography not only provides mechanical uplifting and prevents dry air entrainment, it also helps regulate the strength of upper level anticyclone and tropical easterly jet, all of which are necessary to sustain a conducive environment for monsoon precipitation in the South Asian summer. In turn, precipitation feedbacks positively by accelerating the tropospheric diabatic warming through atmospheric latent heating and by maintaining the moisture supply through local recycling. Modifications in the topography, particularly the removal of the Tibetan Plateau, substantially modulates the moist flow in the lower troposphere and the anticyclonic circulation in the upper troposphere to an extent that the northern branch of SASM becomes substantially weaker. These changes give way to negative precipitation anomalies and eventually to an environment where the cycle of feedbacks that runs the process of monsoon progression over land becomes inefficient. The design of topographic modification experiments can influence precipitation response; therefore, we advise caution in the interpretation of these and previously reported results.

54 ENVIRONMENTAL SCIENCES↗

Three-dimensional shape optical measurement using constant gap control and error compensation

The optical laser displacement sensor is widely used for noncontact measurement of the three-dimensional (3D) shape profile of the object surface. When the surface of an object has a slope variation, the sensor gain is proportionally varied according to that of the object surface. In order to solve the sensor gain variation problem, the constant gap control method is applied to adjust the gap to the nominal distance. Control error compensation is also proposed to cope with the situation even when the gap is not perfectly controlled to the nominal distance using an additional sensor attached to the actuator. 3D shape measurement applying the proposed constant gap control method shows better performances rather than the constant sensor height method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An atomic force microscopy-based method for line edge roughness measurement

With the constant decrease of semiconductor device dimensions, line edge roughness (LER) becomes one of the most important sources of device variability and needs to be controlled below 2 nm for the future technological nodes of the semiconductor roadmap. LER control at the nanometer scale requires accurate measurements. We introduce a technique for LER measurement based upon the atomic force microscope (AFM). In this technique, the sample is tilted at about 45 Degree-Sign and feature sidewalls are scanned along their length with the AFM tip to obtain three-dimensional images. The small radius of curvature of the tip together with the low noise level of a laboratory AFM result in high resolution images. Half profiles and LER values on all the height of the sidewalls are extracted from the 3D images using a procedure that we developed. The influence of sample angle variations on the measurements is shown to be small. The technique is applied to the study of a full pattern transfer into a simplified gate stack. The images obtained are qualitatively consistent with cross-section scanning electron microscopy images and the average LER values agree with that obtained by critical dimension scanning electron microscopy. In addition to its high resolution, this technique presents several advantages such as the ability to image the foot of photoresist lines, complex multi-layer stacks regardless of the materials, and deep re-entrant profiles.

36 MATERIALS SCIENCE↗