Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Differential cross section measurements for the 6Li(n,t)alpha reaction in the few MeV region

New measured differential cross sections of tritons and alpha particles following the {sup 6}Li(n,t){alpha} reaction are reported for incident neutron energies between 0.2 and approximately 20 MeV. The neutrons were produced by spallation at the WNR facility at the Los Alamos Neutron Science CEnter (LANSCE), with the incident neutron energy determined by the time-of-flight method. Four E-{Delta}E telescopes were used at eight laboratory angles. These data have been incorporated into a prior R-matrix fit for the compound {sup 7}Li system, and result in an (n,t) reaction cross section that is 4% to 10% higher than previous evaluations in the 1-3 MeV incident neutron energy region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the $W^+W^-$ Production Cross Section and Search for Anomalous $WW\gamma$ and $WWZ$ Couplings in $p \bar p$ Collisions at $\sqrt{s} = 1.96$ TeV

This Letter describes the current most precise measurement of the W boson pair production cross section and most sensitive test of anomalous WW{gamma} and WWZ couplings in p{bar p} collisions at a center-of-mass energy of 1.96 TeV. The WW candidates are reconstructed from decays containing two charged leptons and two neutrinos, where the charged leptons are either electrons or muons. Using data collected by the CDF II detector from 3.6 fb{sup -1} of integrated luminosity, a total of 654 candidate events are observed with an expected background contribution of 320 {+-} 47 events. The measured total cross section is {sigma}(p{bar p} {yields} W{sup +}W{sup -} + X) = 12.1 {+-} 0.9 (stat){sub -1.4}{sup +1.6} (syst) pb, which is in good agreement with the standard model prediction. The same data sample is used to place constraints on anomalous WW{gamma} and WWZ couplings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optical Model and Cross Section Uncertainties

Distinct minima and maxima in the neutron total cross section uncertainties were observed in model calculations using spherical optical potential. We found this oscillating structure to be a general feature of quantum mechanical wave scattering. Specifically, we analyzed neutron interaction with 56Fe from 1 keV up to 65 MeV, and investigated physical origin of the minima.We discuss their potential importance for practical applications as well as the implications for the uncertainties in total and absorption cross sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Proton Radiography: Cross Section Measurements and Detector Development

Proton radiography has become an important tool for predicting the performance of stockpiled nuclear weapons. Current proton radiography experiments at LANSCE are confined to relatively small targets on the order of centimeters in size because of the low beam energy. LANL scientists have made radiographs with 12 and 24 GeV protons produced by the accelerator at Brookhaven National Laboratory. These energies are in the range required for hydrotest radiography. The design of a facility for hydrotest radiography requires knowledge of the cross sections for producing high-energy particles in the forward direction, which are incorporated into the Monte Carlo simulation used in designing the beam and detectors. There are few existing measurements of neutron production cross sections for proton-nuclei interactions in the 50 GeV range, and almost no data exist for forward neutron production, especially for heavy target nuclei. Thus the data from the MIPP EMCAL and HCAL, for which our group was responsible, are critical to proton radiography. Since neutrons and photons cannot be focused by magnets, they cause a background “fog” on the images. This problem can be minimized by careful design of the focusing system and detectors. The purpose of our research was to measure forward production of neutrons produced by high-energy proton beams striking a variety of targets. The forward-going particles carry most of the energy from a high-energy proton interaction, so these are the most important to proton radiography. This work was carried out in conjunction with the Fermilab E-907 (MIPP) collaboration. Our group was responsible for designing and building the E907 forward neutron and photon calorimeters. With the support of our Stewardship Science Academic Alliances grants, we were able to design, build, and commission the calorimeters on budget and ahead of schedule. The MIPP experiment accumulated a large amount of data in the first run that ended in early 2006. Our group has almost completed the analysis the forward neutron production data. Large dis-crepancies between our neutron production data and Monte Carlo expectations have been found.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

New Neutron-Induced Cross-Section Measurements for Improved Nuclear Data

Many older neutron cross-section evaluations from libraries such as ENDF/B-VI or JENDL-3.2 exhibit deficiencies or do not cover energy ranges that are important for criticality safety applications. These deficiencies may occur in the resonance region and high energy region. Consequently, these evaluated data may not be adequate for nuclear criticality calculations where effects such as self-shielding, multiple scattering, or Doppler broadening are important. To support the Nuclear Criticality Predictability Program, a series of new measurements has been undertaken in response to deficiencies identified in nuclear data libraries. New data and evaluations including covariances are required for several materials found in mixtures with uranium. For this purpose neutron capture and total cross section measurements have been performed for 58,60Ni, natural chromium, and 53Cr.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In Situ Study on Fracture Behavior of Thick-Section Friction Stir-Welded AA 5083 Alloy

Friction stir welding (FSW) produces a gradient microstructure with distinct metallurgical zones. Here, the present study focuses on characterizing the fracture behavior during uniaxial loading across thick-section FSW joint in nonheat-treatable 5083 aluminum alloy. The hardness variation is linked to microstructural features across the weld zones through correlative microscopy. Notably, the heat-affected zone (HAZ) exhibits a lower hardness of 75 HV, while the thermomechanically affected zone (TMAZ) and stir zones (SZ) display a hardness of around 79HV. A marginal difference in hardness in HAZ prompts strain localization in HAZ on the advancing side of the weld, resulting in offset in fracture from the SZ, which is captured through in situ monitoring of the tensile test. Further, the postdeformation analysis reveals crack propagation along the maximum shear stress plane due to the coalescence of microvoids resulting from the fracturing and debonding of second-phase particles. Overall, this study provides valuable insight for optimizing the FSW process of AA 5083 alloy for thick-section applications.

36 MATERIALS SCIENCE↗

Measurement of the t t-bar production cross section and the top quark mass in the dilepton channel in pp collisions at sqrt(s) =7 TeV

The t{bar t} production cross section and top quark mass are measured in proton-proton collisions at {radical}s = 7 TeV in a data sample corresponding to an integrated luminosity of 36 pb{sup -1} collected by the CMS experiment. The measurements are performed in events with two leptons (electrons or muons) in the final state. Results of the cross section measurement in events with and without b-quark identification are obtained and combined. The measured value is {sigma}{sub t{bar t}} = 168 {+-} 18 (stat.) {+-} 14 (syst.) {+-} 7 (lumi.) pb, consistent with predictions from the standard model. The top quark mass m{sub top} is reconstructed with two different methods, a full kinematic analysis and a matrix weighting technique. The combination yields a measurement of m{sub top} = 175.5 {+-} 4.6 (stat.) {+-} 4.6 (syst.) GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Differential cross-sections for events with missing transverse momentum and jets measured with the ATLAS detector in 13 TeV proton-proton collisions

Measurements of inclusive, differential cross-sections for the production of events with missing transverse momentum in association with jets in proton-proton collisions at √s = 13 TeV are presented. The measurements are made with the ATLAS detector using an integrated luminosity of 140 fb –1 and include measurements of dijet distributions in a region in which vector-boson fusion processes are enhanced. They are unfolded to correct for detector resolution and efficiency within the fiducial acceptance, and are designed to allow robust comparisons with a wide range of theoretical predictions. A measurement of differential cross sections for the Z → νν process is made. The measurements are generally well-described by Standard Model predictions except for the dijet invariant mass distribution. Auxiliary measurements of the hadronic system recoiling against isolated leptons, and photons, are also made in the same phase space. Ratios between the measured distributions are then derived, to take advantage of cancellations in modelling effects and some of the major systematic uncertainties. These measurements are sensitive to new phenomena, and provide a mechanism to easily set constraints on phenomenological models. To illustrate the robustness of the approach, these ratios are compared with two common Dark Matter models, where the constraints derived from the measurement are comparable to those set by dedicated detector-level searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Study on the New Empirical Cross Section Formulae for (γ, p) Reactions at 20 ± 1 MeV Incident Energy

In this study, we have investigated theoretical cross sections of (γ, p) reactions at 20 ± 1 MeV for the photon incident energy and then we have obtained two new empirical formulae for 40 ≤ A ≤ 108 and for the even Z-even N target nuclei including new fitting parameters. These new empirical formulae depending on the asymmetry parameters (s = (N − Z)/A) were determined by using the least squares approximation fitting method to the available experimental cross section data taken from EXFOR. The results have been compared with the experimental data and found to be well in agreement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

M-shell X-ray production cross-sections for elements with 67 {<=} Z {<=} 92 at incident photon energies E{sub M{sub 1}}<E{sub inc}{<=}150keV

The X-ray production cross-sections for the Mk (k = {xi}, {delta}, {alpha}, {beta}, {zeta}, {gamma}, m{sub 1} and m{sub 2}) groups of X-rays have been evaluated for all the elements with 67 {<=} Z {<=} 92 at incident photon energies ranging E{sub M{sub 1}}<E{sub inc}{<=}150 keV using currently available theoretical data sets of different physical parameters, namely, partial photoionization cross-sections, X-ray emission rates, fluorescence and Coster-Kronig yields, and the K-shell/L{sub j} (j = 1-3) subshell to the M{sub i} (i = 1-5) subshell vacancy transfer probabilities, based on the independent particle models.

74 ATOMIC AND MOLECULAR PHYSICS↗

Experimental electron loss and capture cross sections in ion-atom collisions

This work presents a compilation of experimental data for electron capture and loss cross sections obtained at the Scobeltsyn Institute of Nuclear Physics for neutral atoms and negative and positive ions with nuclear charge Z = 2-36 in collisions with atomic and molecular gases. The charge-changing cross sections are summarized in tables with the reference list attached.

74 ATOMIC AND MOLECULAR PHYSICS↗

Recommended electron-impact excitation and ionization cross sections for Be I

Analytic fits to the recommended electron-impact excitation and ionization cross sections for Be I are presented. The lowest 19 terms of configurations 2s nl (n ≤ 4) and 2p{sup 2} terms below the first ionization limit are considered. The fits are based on the accurate calculations with the convergent close coupling (CCC) method as well as the B-spline R-matrix (BSR) approach. The fitted cross sections provide rate coefficients that are believed to approximate the original data within 10% with very few exceptions. The oscillator strengths for the dipole-allowed transitions between all the considered states are calculated with the relativistic multi-configuration Dirac–Hartree–Fock (MCDHF) approach and compared with the CCC and BSR results. This comparison shows a very good agreement except for a handful of cases with likely strong cancellations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Total thermal neutron cross section measurements of yttrium hydride from 0.0005 - 3 eV

Yttrium hydride serves as a neutron moderator material that enables compact, high temperature nuclear reactors. However, in order to accurately design and simulate a nuclear system relying upon yttrium hydride, the fundamental nuclear data of yttrium hydride must be well understood. Thermal neutron scattering law (TSL) evaluations represent an important aspect of nuclear data as thermal scattering can drastically alter the neutron multiplication factor of a system. Therefore, to support evaluation and validation of thermal neutron scattering for yttrium hydride, researchers at Rensselaer Polytechnic Institute (RPI) performed total thermal neutron cross section measurements for YH 1.68 and YH 1.85 over the energy range of 0.0005 - 3 eV. Further, these measurements represent the first total cross section measurements for yttrium hydride that encompass the entire thermal region. Comparisons were made against the ENDF-B/VIII.0, Zerkle & Holmes and Oak Ridge National Laboratory TSL evaluations, where generally good agreement was found.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

IR-improved DGLAP-CS theory: Kernels, parton distributions, reduced cross sections

It is shown that exact, amplitude-based resummation allows IR-improvement of the usual DGLAP-CS theory. This results in a new set of kernels, parton distributions and attendant reduced cross sections, so that the QCD perturbative result for the respective hadron-hadron or lepton-hadron cross section is unchanged order-by-order in {alpha}{sub s} at large squared-momentum transfers. We compare these new objects with their usual counter-parts and illustrate the effects of the IR-improvement in some phenomenological cases of interest with an eye toward precision applications in LHC physics scenarios00.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of momentum dependent interactions and nucleonic cross-section on directed flow (v{sub 1})

The descriptive analysis for the effect of momentum dependent interactions and nucleonic cross-section (isospin dependent and isospin-independent) on the neutron–proton directed flow (v{sub 1}), within the framework of the isospin dependent quantum molecular dynamics model is presented. Our study shows that, the directed flow of both neutrons and protons is affected by the momentum dependence of nuclear equation of state and the isospin dependence of nucleon–nucleon cross-section. A soft momentum dependent (SM) equation of state is found to be more compatible with the experimental data. -- Highlights: •Role of rapidity cut on transverse flow has been explored. •p{sub t} differential flow for protons and neutrons has been studied. •Role of MDI on directed flow has been studied.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

One-loop corrections to light cone wave functions: The dipole picture DIS cross section

We develop methods to perform loop calculations in light cone perturbation theory using a helicity basis, refining the method introduced in our earlier work. In particular this includes implementing a consistent way to contract the four-dimensional tensor structures from the helicity vectors with d-dimensional tensors arising from loop integrals, in a way that can be fully automatized. We demonstrate this explicitly by calculating the one-loop correction to the virtual photon to quark–antiquark dipole light cone wave function. This allows us to calculate the deep inelastic scattering cross section in the dipole formalism to next-to-leading order accuracy. Our results, obtained using the four dimensional helicity scheme, agree with the recent calculation by Beuf using conventional dimensional regularization, confirming the regularization scheme independence of this cross section.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cross-sections for (p,x) reactions on natural chromium for the production of 52,52m,54 Mn radioisotopes

The production of positron-emitting isotopes of manganese is potentially important for developing contrast agents for dual-modality positron emission tomography and magnetic resonance (PET/MR) imaging, as well as for in vivo imaging of the biodistribution and toxicity of manganese. Furthermore, the decay properties of 52 Mn make it an excellent candidate for these applications, and it can easily be produced by bombardment of a chromium target with protons or deuterons from a low-energy biomedical cyclotron. There are several parameters essential to this mode of production—target thickness, beam energy, beam current, and bombardment time—depend heavily on the availability of reliable, reproducible cross-section data. Our paper contributes to the routine production of 52g Mn for biomedical research by contributing experimental cross-sections for natural chromium ( nat Cr) targets for the nat Cr(p,x) 52g Mn reaction, as well as for the production of the radiocontaminants 52m, 54 Mn.

07 ISOTOPE AND RADIATION SOURCES↗

The 40 Ar(d,p) 41 Ar cross section between 3–7 MeV

To determine the safety of using argon as a deuteron beam stopping material, the 40 Ar(d,p) 41 Ar cross section was measured at average deuteron energies of 3.6 MeV, 5.5 MeV, and 7.0 MeV using an activation method. A 16-MeV deuteron beam produced by Lawrence Berkeley National Laboratory’s 88-Inch Cyclotron was degraded to each energy by nickel foils and the front wall of an aluminum gas chamber. The reduced-energy deuterons were used to activate a sample of nat Ar gas. After each irradiation, the gas chamber’s 41 Ar activation was measured with a high-purity germanium detector. The cross sections measured were larger than a previous measurement by ~40%.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗