Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reliability study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Attitude and Trajectory Estimation Using Earth Magnetic Field Data

The magnetometer has long been a reliable, inexpensive sensor used in spacecraft momentum management and attitude estimation. Recent studies show an increased accuracy potential for magnetometer-only attitude estimation systems. Since the Earth's magnetic field is a function of time and position, and since time is known quite precisely, the differences between the computer and measured magnetic field components, as measured by the magnetometers throughout the entire spacecraft orbit, are a function of both the spacecraft trajectory and attitude errors. Therefore, these errors can be used to estimate both trajectory and attitude. Traditionally, satellite attitude and trajectory have been estimated with completely separate system, using different measurement data. Recently, trajectory estimation for low earth orbit satellites was successfully demonstrated in ground software using only magnetometer data. This work proposes a single augmented extended Kalman Filter to simultaneously and autonomously estimate both spacecraft trajectory and attitude with data from a magnetometer and either dynamically determined rates or gyro-measured body rates.

Deutschmann, Julie↗
NASA NTRS1996

Project ORION: Orbital Debris Removal Using Ground-Based Sensors and Lasers

About 100,000 pieces of 1 to 10-cm debris in low-Earth orbit are too small to track reliably but large enough to cripple or destroy spacecraft. The ORION team studied the feasibility of removing the debris with ground-based laser impulses. Photoablation experiments were surveyed and applied to likely debris materials. Laser intensities needed for debris orbit modification call for pulses on the order of lOkJ or continuous wave lasers on the order of 1 MW. Adaptive optics are necessary to correct for atmospheric turbulence. Wavelength and pulse duration windows were found that limit beam degradation due to nonlinear atmospheric processes. Debris can be detected and located to within about 10 microrads with existing radar and passive optical technology. Fine targeting would be accomplished with laser illumination, which might also be used for detection. Bistatic detection with communications satellites may also be possible. We recommend that existing technology be used to demonstrate the concept at a loss of about $20 million. We calculate that an installation to clear altitudes up to 800 km of 1 to 10-cm debris over 2 years of operation would cost about $80 million. Clearing altitudes up to 1,500 km would take about 3 years and cost about $160 million.

Campbell, J. W.↗
NASA NTRS2002

Rocket Propellants Engine Design/Operations/Validation

Lockheed Martin Astronautics Operations (LMA) was competitively awarded a contract May 21, 2001 for next generation launch system architecture definition and technology maturation. The Second Generation Launch Vehicle Program objectives include reducing the technical and programmatic risk of proceeding to full scale development of the system by establishing requirements for the next generation launch system and maturing critical technologies needed by the system. LMA will conduct analyses and trades to optimize the architecture ETO elements including configuration, conceptual designs, and preliminary operations definition. To fully understand the engine and propellant trades were conducted by LMA to yield the optimized architecture system from the operability, reliability, safety, and cost perspectives. A government/industry team addressed the required trade studies, the parameters and weighting factors, and the most critical trades were addressed. This report summarizes the participation of JCM Consulting, Inc. in the propellant trade study.

Monk, Jan C.↗
NASA NTRS2003

Effect of Turbulence Models on Two Massively-Separated Benchmark Flow Cases

Two massively-separated flow cases (the 2-D hill and the 3-D Ahmed body) were computed with several different turbulence models in the Reynolds-averaged Navier-Stokes code CFL3D as part of participation in a turbulence modeling workshop held in Poitiers, France in October, 2002. Overall, results were disappointing, but were consistent with results from other RANS codes and other turbulence models at the workshop. For the 2-D hill case, those turbulence models that predicted separation location accurately ended up yielding a too-long separation extent downstream. The one model that predicted a shorter separation extent in better agreement with LES data did so only by coincidence: its prediction of earlier reattachment was due to a too-late prediction of the separation location. For the Ahmed body, two slant angles were computed, and CFD performed fairly well for one of the cases (the larger slant angle). Both turbulence models tested in this case were very similar to each other. For the smaller slant angle, CFD predicted massive separation, whereas the experiment showed reattachment about half-way down the center of the face. These test cases serve as reminders that state- of-the-art CFD is currently not a reliable predictor of massively-separated flow physics, and that further validation studies in this area would be beneficial.

Rumsey, Christopher L.↗
NASA NTRS2004

Evaluation of the Paratrend Multi-Analyte Sensor for Potential Utilization in Long-Duration Automated Cell Culture Monitoring

BACKGROUND: Compact and automated sensors are desired for assessing the health of cell cultures in biotechnology experiments. While several single-analyte sensors exist to measure culture health, a multi-analyte sensor would simplify the cell culture system. One such multi-analyte sensor, the Paratrend 7 manufactured by Diametrics Medical, consists of three optical fibers for measuring pH, dissolved carbon dioxide (pCO(2)), dissolved oxygen (pO(2)), and a thermocouple to measure temperature. The sensor bundle was designed for intra-vascular measurements in clinical settings, and can be used in bioreactors operated both on the ground and in NASA's Space Shuttle and International Space Station (ISS) experiments. METHODS: A Paratrend 7 sensor was placed at the outlet of a bioreactor inoculated with BHK-21 (baby hamster kidney) cells. The pH, pCO(2), pO(2), and temperature data were transferred continuously to an external computer. Cell culture medium, manually extracted from the bioreactor through a sampling port, was also assayed using a bench top blood gas analyzer (BGA). RESULTS: Two Paratrend 7 sensors were used over a single cell culture experiment (64 days). When compared to the manually obtained BGA samples, the sensor had good agreement for pH, pCO(2), and pO(2) with bias (and precision) 0.005(0.024), 8.0 mmHg (4.4 mmHg), and 11 mmHg (17 mmHg), respectively for the first two sensors. A third Paratrend sensor (operated for 141 days) had similar agreement (0.02+/-0.15 for pH, -4+/-8 mm Hg for pCO(2), and 24+/-18 mmHg for pO(2)). CONCLUSION: The resulting biases and precisions are com- parable to Paratrend sensor clinical results. Although the pO(2) differences may be acceptable for clinically relevant measurement ranges, the O(2) sensor in this bundle may not be reliable enough for the ranges of pO(2) in these cell culture studies without periodic calibration.

Validation Studies↗
NASA NTRS2005

Feasibility of Measuring Mean Vertical Motion for Estimating Advection

Numerous recent studies calculate horizontal and vertical advection terms for budget studies of net ecosystem exchange of carbon. One potential uncertainty in such studies is the estimate of mean vertical motion. This work addresses the reliability of vertical advection estimates by contrasting the vertical motion obtained from the standard practise of measuring the vertical velocity and applying a tilt correction, to the vertical motion calculated from measurements of the horizontal divergence of the flow using a network of towers. Results are compared for three different tilt correction methods. Estimates of mean vertical motion are sensitive to the choice of tilt correction method. The short-term mean (10 to 60 minutes) vertical motion based on the horizontal divergence is more realistic compared to the estimates derived from the standard practise. The divergence shows long-term mean (days to months) sinking motion at the site, apparently due to the surface roughness change. Because all the tilt correction methods rely on the assumption that the long-term mean vertical motion is zero for a given wind direction, they fail to reproduce the vertical motion based on the divergence.

Vickers, Dean↗
NASA NTRS2006

Converging Indicators for Assessing Individual Differences in Adaptation to Extreme Environments: Preliminary Report

This paper describes the development and validation of a new methodology for assessing the deleterious effects of spaceflight on crew health and performance. It is well known that microgravity results in various physiological alterations, e.g., headward fluid shifts which can impede physiological adaptation. Other factors that may affect crew operational efficiency include disruption of sleep-wake cycles, high workload, isolation, confinement, stress and fatigue. From an operational perspective, it is difficult to predict which individuals will be most or least affected in this unique environment given that most astronauts are first-time flyers. During future lunar and Mars missions space crews will include both men and women of multi-national origins, different professional backgrounds, and various states of physical condition. Therefore, new methods or technologies are needed to monitor and predict astronaut performance and health, and to evaluate the effects of various countermeasures on crew during long duration missions. This paper reviews several studies conducted in both laboratory and operational environments with men and women ranging in age between 18 to 50 years. The studies included the following: soldiers performing command and control functions during mobile operations in enclosed armored vehicles; subjects participating in laboratory tests of an anti-motion sickness medication; subjects exposed to chronic hypergravity aboard a centrifuge, and subject responses to 36-hours of sleep deprivation. Physiological measurements, performance metrics, and subjective self-reports were collected in each study. The results demonstrate that multivariate converging indicators provide a significantly more reliable method for assessing environmental effects on performance and health than any single indicator.

Cowings, Patricia S.↗
NASA NTRS2006

In-Space Cryogenic Propellant Depot Potential Commercial and Exploration Applications

The key goals and objectives for an In-Space Cryogenic Propellant Depot are to support a safe, reliable, affordable and effective future human and robotic space exploration initiative. Previous studies have been conducted at the NASA Marshall Space Flight Center to determine technical requirements and feasibility for exploration and commercial potential of an in-space cryogenic propellant depot in low-Earth-orbit (LEO), low-Lunar orbit (LLO) and/or on the lunar surface. Results indicate that in-space cryogenic propellant depots are technically feasible given continued technology development and that there is a substantial growing market that depots could support. Systems studies showed that the most expensive part of transferring payloads to geo-synchronous-orbit (GEO) is the fuel. A cryogenic propellant production and storage depot stationed in LEO could lower the cost of missions to GEO and beyond. Propellant production separates water into hydrogen and oxygen through electrolysis. This process requires large amounts of power which is enabled by Space Solar Power technologies. Recent analysis indicate that in the coming decades there could be a significant demand for water-based propellants from Earth, moon, or asteroid resources if in-space transfer vehicles (upper stages) transitioned to reusable systems using water based propellants. This type of strategic planning move could create a substantial commercial market for space resources development, and ultimately lead toward significant commercial infrastructure development within the Earth-Moon system.

Howell, Joe T.↗
NASA NTRS2009

Bond Assembly FOD Zones - A Procedure for Assuring Acceptable Adhesion

Rocket motor components are primarily assembled by adhesion. a) For example, the RSRM (Reusable Solid Rocket Motor - part of the Space Shuttle Boosters) system contains 10,000 sq ft of bondline area. b) Rocket motors contain a variety of adhesive/substrate bond systems c) Bond system performance requirements also vary. To assemble reliable components, ATK Space Systems and customers invest substantial resources to the study of bond assembly processes. a) Surface and adhesion science; b) Adhesive chemistry; c) Process parameters; d) Contamination effects.

Evans, Kurt↗
NASA NTRS2011

Alternative Fuel Research in Fischer-Tropsch Synthesis

NASA Glenn Research Center has recently constructed an Alternative Fuels Laboratory which is solely being used to perform Fischer-Tropsch (F-T) reactor studies, novel catalyst development and thermal stability experiments. Facility systems have demonstrated reliability and consistency for continuous and safe operations in Fischer-Tropsch synthesis. The purpose of this test facility is to conduct bench scale Fischer-Tropsch (F-T) catalyst screening experiments while focusing on reducing energy inputs, reducing CO2 emissions and increasing product yields within the F-T process. Fischer-Tropsch synthesis is considered a gas to liquid process which reacts syn-gas (a gaseous mixture of hydrogen and carbon monoxide), over the surface of a catalyst material which is then converted into liquids of various hydrocarbon chain length and product distributions1. These hydrocarbons can then be further processed into higher quality liquid fuels such as gasoline and diesel. The experiments performed in this laboratory will enable the investigation of F-T reaction kinetics to focus on newly formulated catalysts, improved process conditions and enhanced catalyst activation methods. Currently the facility has the capability of performing three simultaneous reactor screening tests, along with a fourth fixed-bed reactor used solely for cobalt catalyst activation.

Surgenor, Angela D.↗
NASA NTRS2013

Analysis of an Aircraft Honeycomb Sandwich Panel with Circular Face Sheet/Core Disbond Subjected to Ground-Air Pressurization

The ground-air pressurization of lightweight honeycomb sandwich structures caused by alternating pressure differences between the enclosed air within the honeycomb core and the ambient environment is a well-known and controllable loading condition of aerospace structures. However, initial face sheet/core disbonds intensify the face sheet peeling effect of the internal pressure load significantly and can decrease the reliability of the sandwich structure drastically. Within this paper, a numerical parameter study was carried out to investigate the criticality of initial disbonds in honeycomb sandwich structures under ground-air pressurization. A fracture mechanics approach was used to evaluate the loading at the disbond front. In this case, the strain energy release rate was computed via the Virtual Crack Closure Technique. Special attention was paid to the pressure-deformation coupling which can decrease the pressure load within the disbonded sandwich section significantly when the structure is highly deformed.

Rinker, Martin↗
NASA NTRS2016

Design and Use of a Guided Weight Impactor to Impart Barely Visible Impact Damage

Aircraft structure is required to demonstrate satisfaction of the FAR requirements for Category 1, such as barely visible impact damage (BVID). Typical aircraft structure is impacted using a dropped weight impactor, which can impart BVID to the top surface of the structure. A recent test of a multi-bay box (MBB) composite test article, that represents an 80% scale center section of a hybrid wing body aircraft, required impact to be in a direction other than vertical from above, but still in an direction that is normal to the surface. This requirement eliminated the use of the conventional dropped weight impactor. Therefore, a design study was undertaken to determine the most effective way to efficiently and reliably impact the MBB. The chosen design was a guided weight impactor that is gravity driven. This paper describes the design of the guided weight impactor, and presents the results of its use for imparting BVID to the MBB. The guided weight impactor was seen to be a very reliable method to impart BVID, while at the same time having the capability to be highly configurable for use on other aircraft structure that is impacted at a variety of impact energies and from a variety of directions.

Lovejoy, Andrew E.↗
NASA NTRS2015

Deriving Polarization Properties of Desert-Reflected Solar Spectra with PARASOL Data

Reflected solar radiation from desert is strongly polarized by sand particles. To date, there is no reliable desert surface reflection model to calculate desert reflection matrix. In this study, the PARASOL data are used to retrieve physical properties of desert. These physical properties are then used in the ADRTM to calculate polarization of desert-reflected light for the whole solar spectra.

Sun, Wenbo↗
NASA NTRS2017

Enzymatic Activity Detection via Electrochemistry for Enceladus

Electrochemical detection of biological molecules is a pertinent topic and application in many fields such as medicine, environmental spills, and life detection in space. Proteases, a class of molecules of interest in the search for life, catalyze the hydrolysis of peptides. Trypsin, a specific protease, was chosen to investigate an optimized enzyme detection system using electrochemistry. This study aims at providing the ideal functionalization of an electrode that can reliably detect a signal indicative of an enzymatic reaction from an Enceladus sample.

astrobiolog↗
NASA NTRS2021

Improved Rainfall Data in the Philippines through Concurrent Use of GPM IMERG and Ground-Based Measurements

The availability of accurate and reliable rainfall data that are applicable to various phenomenological, climatological, and modeling studies is important, especially in the Philippines, which is considered to be highly vulnerable to natural hazards and a changing climate. The presented strategy involved constructing a dataset consisting of synoptic data, automatic rain gauge (ARG) measurements, and satellite data that are co-registered, consistent, and formatted in the same manner. Although sparse in number, the synoptic stations provide the most accurate rainfall information and were used as the baseline for creating the dataset. The ARGs that are within a distance of 1 km to the synoptic stations were used to determine the correction factors needed to make the synoptic and ARG data consistent. Subsequently, the corrected ARGs were used to make the satellite IMERG data consistent with both ARG and synoptic data. In case of the latter, only IMERG pixels with at least 10 ARGs within the relatively large footprint of the satellite sensor were used in estimating the required correction parameters derived from a combination of a power transform and linear regression correction techniques. The final results show good agreement of synoptic and corrected ARG data with correlation coefficients of 0.94 and 0.97 for the 10 day and monthly data, respectively, and improvement in the linear regression slope from 0.67 to 0.90 for 10 day data, and 0.70 to 0.94 for monthly data. In addition, the corrected ARG data agree well with the corrected IMERG data, with correlation coefficients of 0.88 and 0.93 for the 10 day and monthly data, respectively, and an improvement in slope from 0.66 to 0.87 for 10 day data, and 0.74 to 0.99 for monthly data. The merit of using a combined dataset is illustrated through comparative analyses of the IMERG data and spatially interpolated synoptic and ARG data. The results show general agreements in spatial patterns of rainfall across the datasets, especially in areas where in situ measurements are recorded. The observed discrepancy when ground data is limited emphasizes the need for satellite IMERG data to obtain the true spatial patterns of rainfall distribution.

rainfall↗
NASA NTRSDate not supplied

Phasing in COTS EEE parts in NASA

A number of activities within NASA and the space community, as well as growing technology needs and supply chain changes have accelerated the need to expand the use of COTS parts within NASA. While the use of COTS has been formally institutionalized and deemed acceptable for Class D space missions and those with greater tolerance for risk, there is still a lack of understanding of how to most effectively use COTS in such high risk-tolerance missions, and no apparent path towards broad use in missions with much less tolerance for risk. However, the reality is that the fundamental limitations of technology associated with the military specification system combined with the need to fly newer technologies in upcoming flagship robotic missions and human space flight missions will ultimately demand a more expansive use of COTS. The infinite nature of COTS gives rise to numerous challenges in the selection, acceptance, testing, and usage of COTS when reliable operation is essential. This presentation will highlight some of the current artifacts of a NASA Engineering and Safety Center (NESC) study on the use of COTS parts, as well as many of the historical through current facts about parts assurance within Agency to provide a path forward for reliable use of COTS for a range of space applications and risk postures.

EEE parts↗
DOE OSTI2020

Insights from PVEL's indoor and outdoor bifacial testing

This webinar presentation summarizes initial results from PVEL's DOE-funded outdoor bifacial field study at PVUSA and well as data from PVEL's indoor bifacial reliability testing. Highlights from PVEL's DOE-funded research include daily and monthly bifacial gains by manufacturer over different albedos and by time of day.

Erion-Lorico, Tristan↗
DOE OSTI2021

Physics-informed, empirically constrained machine learning for designing Fe-9Cr alloys

<span style="font-family: Calibri, sans-serif; font-size: 12pt;">Materials data analytics can be used to significantly shorten development time of specialized alloys needed for next generation energy applications. Incorporation of the domain knowledge into deep-learning graph structure via fuzzy pre-training and causal process imitation presents a viable approach to developing accurate data-driven models and reliable alloy design tools, with limited datasets. It was demonstrated that the domain knowledge-based empirical constraints not only inhibit overfitting but also allow training more accurate and reliable ML models with improved transparency of the output interpretation. In this study, alloy tensile properties were interpreted with three competing virtual-microstructure models.</span>

Romanov, Vyacheslav↗