Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “purification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Evaluation of chromatographic resins for high efficacy separation of radium from chemical analogues

The separation of Radium (Ra) from interfering chemical analogues is of major importance for both the accurate measurement of Ra-226 in environmental samples and the preparation of radium targets destined for medical isotope production. The adsorption behavior of Ra, Barium (Ba), and Strontium (Sr) was investigated on multiple crown-ether-based proprietary extraction chromatographic resins developed by TrisKem Int. Among these, the TK101 resin, characterized by a novel room-temperature ionic liquid (RTIL) dual extractant–solvent system, demonstrated enhanced affinity and selectivity, particularly at low acid concentrations, achieving a D w of 3477 ± 73 for Ra in 0.04 M HNO₃, whereas the maximum Ra D w obtained with the traditional Sr resin in 8 M HNO 3 was only 12.33 ± 0.4. In 0.04 M HNO 3 , a Ra distribution ratio (D w ) of 776 was achieved within 1 min, indicating rapid uptake kinetics. The adsorption capacities were estimated at 19.6 ± 0.1 mg/g for Ba and 12.0 ± 0.2 mg/g for Sr. However, competing alkali metals significantly reduced alkaline earth metal uptake, indicating that the TK101 resin is best suited for radium purification following a preconcentration step to minimize matrix effects in high salinity samples. Dynamic column studies confirmed the strong chromatographic performance of the TK101 resin, with no significant Ba or Sr breakthrough in the Ra fraction and a Ra recovery of 87 ± 2.8%. These results demonstrate the potential of the TK101 resin for selective radium separation in analytical and radiochemical applications.

and nuclear chemistry↗

Protein extraction into the bicontinuous microemulsion phase of a Water/SDS/pentanol/dodecane winsor-III system: Effect on nanostructure and protein conformation

Bicontinuous microemulsions (BμEs), consisting of water and oil nanodomains separated by surfactant monolayers of near-zero curvature, are potentially valuable systems for purification and delivery of biomolecules, for hosting multiphasic biochemical reactions, and as templating media for preparing nanomaterials. We formed Winsor-III systems by mixing aqueous protein and sodium dodecyl sulfate (SDS) solutions with dodecane and 1-pentanol (cosurfactant) to efficiently extract proteins into the middle (BμE) phase. Bovine serum albumin (BSA) and cytochrome c partitioned to the BμE phase at 64% and 81% efficiency, respectively, producing highly concentrated protein solutions (32 and 44 g L –1 , respectively), through release of water and oil from the BμEs. Circular dichroism spectroscopic analysis demonstrated that BSA underwent minor secondary structural changes upon incorporation into BμEs, while the secondary structure of cytochrome c and pepsin underwent major changes. Small-angle x-ray scattering (SAXS) results show that proteins promoted an increase of the interfacial fluidity and surface area per volume for the BμE surfactant monolayers, and that each protein uniquely altered self-assembly in the Winsor-III systems. Cytochrome c partitioned via electrostatic attractions between SDS and the protein’s positively-charged groups, residing near the surfactant head groups of BμE monolayers, where it decreased surfactant packing efficiency. BSA partitioned through formation of SDS-BSA complexes via hydrophobic and electrostatic attractive interactions. As the BSA-SDS ratio increased, complexes’ partitioning favored BμEs over the oil excess phase due to the increased hydrophilicity of the complexes. In conclusion, this study demonstrates the potential utility of BμEs to purify proteins and prepare nanostructured fluids possessing high protein concentration.

59 BASIC BIOLOGICAL SCIENCES↗

Phase field benchmark problems targeting fluid flow and electrochemistry

Here, we continue our development of phase field model benchmark problems with the addition of a third set, complimenting our previously developed problems for diffusion, precipitation, dendritic growth and linear elasticity. These benchmark problems are being jointly developed by the Center for Hierarchical Materials Design (CHiMaD) and the National Institute of Standards and Technology (NIST) along with input from the phase field community. The first problem in this third set targets Stokes flow, with a particular emphasis on flow around an obstruction placed asymmetrically in the domain. While Stokes flow is not traditionally in the canon of phase field problems, it is a class of problems gaining importance in areas such as filtration and water purification. The second problem deals with coupled Cahn-Hilliard diffusion and electrostatic forces, which is an important area in energy storage and battery sciences. We present our own solutions and discuss sources of numerical errors for the Stokes problem as well as simple checks to avoid fundamental issues in the coupled diffusion-electrostatics problem. The latter problem contains some subtleties that we expand on in an Appendix.

36 MATERIALS SCIENCE↗

Knowns and unknowns in metabolomics identified by multidimensional NMR and hybrid MS/NMR methods

Metabolomics continues to make rapid progress through the development of new and better methods and their applications to gain insight into the metabolism of a wide range of different biological systems from a systems biology perspective. Customization of NMR databases and search tools allows the faster and more accurate identification of known metabolites, whereas the identification of unknowns, without a need for extensive purification, requires new strategies to integrate NMR with mass spectrometry, cheminformatics, and computational methods. For some applications, the use of covalent and non-covalent attachments in the form of labeled tags or nanoparticles can significantly reduce the complexity of these tasks.

Bingol, Kerem↗

Historic and modern nuclear graphite impurities: Pathways to improved waste strategies

Graphite has been used in large volumes as a structural material and neutron moderator since the earliest days of nuclear fission. However, no international consensus exists on the disposal of irradiated graphite, leaving much of the historic radioactive graphite inventory in interim vault or silo storage. With several new graphite-moderated reactors planned or under construction, the issue of graphite waste management is becoming increasingly urgent. This paper reviews and quantifies impurities in both historic and modern nuclear graphite, with emphasis on nitrogen—responsible for much of the 14 C inventory—and chlorine, which plays a critical role in repository performance and design. Modern graphites, benefitting from stringent quality-control measures developed for non-nuclear industries, meet or exceed the ASTM Ultra-High Purity nuclear standards, even without halide purification. Both chlorine and nitrogen concentrations have declined over time. For chlorine, identified as a key impurity influencing U.S. waste repository design, we propose a target of 0.1 appm in as-fabricated billets as a reasonable benchmark. Nitrogen sources are traced throughout the graphite production process, with surface and bulk concentrations characterized for all materials studied. Modern graphites commonly exhibit nitrogen levels below 5 appm, with values approaching 1 appm achievable. Using such reduced-nitrogen grades is critical to keeping graphite-induced radioactivity below the greater-than-Class-C waste threshold, thereby avoiding disposal cost penalties of nearly an order of magnitude.

Chlorine↗

Comparative techno-economic analysis of synthetic renewable natural gas production via reactive CO 2 capture and conversion

Reactive CO 2 capture and conversion (RCC) is an emerging carbon management strategy that integrates CO 2 capture and conversion and avoids intermediate CO 2 purification. In this study, we design an RCC process to capture atmospheric CO 2 and react it with renewable hydrogen to produce synthetic renewable natural gas (SRNG), which serves as a carbon-neutral energy source and a chemical form of long-duration renewable energy storage. We assess the technological potential of RCC through process modeling, techno-economic, carbon footprint, and sensitivity analyses. Our findings demonstrate that RCC offers energy savings and comparable cost to separated capture and conversion processes. The cost is dominated by renewable hydrogen and material replacement cost. SRNG produced via RCC is competitive with existing low-carbon natural gas technologies and presents a promising low-cost option for long-duration energy storage. This work highlights the potential for deploying RCC technologies within a circular carbon economy and the scientific and technical challenges that must be overcome for material and technology developers.

03 NATURAL GAS↗

Novel graphene quantum dots (GQDs)-incorporated thin film composite (TFC) membranes for forward osmosis (FO) desalination

This paper reports a novel class of thin film composite (TFC) membranes for forward osmosis (FO) desalination. The TFC membranes were fabricated via interfacial polymerization (IP) of aqueous mixture of polyethyleneimine (PEI) and graphene quantum dots (GQDs) with organic solution of trimesoyl chloride (TMC) on modified polyacrylonitrile (PAN) ultrafiltration substrates. The chemical structures and morphologies of the synthesized GQDs and the GQDs-incorporated membranes were studied by various characterization techniques. The synthesized GQDs exhibited a narrow size distribution of 1.0–4.0 nm with an average size of 2.19 nm, and the thickness were one to three graphene layers. The results showed that GQDs nanoparticles were covalently bonded to the polyamide chains. The optimized TFC membrane with 0.050 wt% GQDs loading exhibited quite hydrophilic and neutrally charged membrane surface, along with an enhanced water flux of 12.9 L m –2 h –1 and a comparable reverse salt flux of 1.41 g m –2 h –1 when DI water and 0.5 M MgCl2 were used as the feed solution and the draw solution, respectively. Also, the optimized GQDs-incorporated TFC membrane presented an especially good anti-fouling performance. Furthermore, incorporating the novel graphene nanomaterial into polymer membranes may present its great potential application in desalination, purification and wastewater treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of electrodialysis pretreatment to enhance boron removal and reduce fouling during desalination by nanofiltration/reverse osmosis

we report membranes have emerged as promising technologies for treatment of non-traditional waters, but fouling and poor rejection of small, neutral solutes (e.g., boric acid) impede their further implementation for water purification. Boron rejection is increased by raising the pH to convert boric acid to borate ion, but this change often leads to calcite supersaturation. This study investigated the use of a hybrid electrodialysis-nanofiltration/reverse osmosis (ED-NF/RO) system to reduce fouling from calcite precipitation and calcium-polysaccharide sorption to NF/RO membranes. Also, the study examined the potential of the hybrid process to increase permeate flux and boron rejection during NF/RO of synthetic saline water. ED pretreatment reduced calcite oversaturation and reduced flux decline during NF/RO. Low alginate concentrations (25 mg/L) limited NF/RO fouling, but high concentrations (100 mg/L) appeared to promote calcite scaling. ED pretreatment reduced the osmotic pressure of the NF/RO feed water, enabling lower operating pressures or greater permeate water fluxes. Boron rejection during NF/RO increased with ED pretreatment, probably due to stronger electrostatic repulsion and an increase in the fraction of total boron present as B(OH)4- following ED. This hybrid ED-NF/RO system shows promise as a novel approach to enhancing the performance of current membrane systems for treating complex feed waters.

alginate↗

Correlating the role of nanofillers with active layer properties and performance of thin-film nanocomposite membranes

Thin-film nanocomposite (TFN) membranes are emerging water-purification membranes that could provide enhanced water permeance with similar solute removal over traditional thin-film composite (TFC) membranes. However, the effects of nanofiller incorporation on active layer physico-chemical properties have not been comprehensively studied. Accordingly, we aimed to understand the correlation between nanofillers, active layer physico-chemical properties, and membrane performance by investigating whether observed performance differences between TFN and control TFC membranes correlated with observed differences in physico-chemical properties. Throughout this work, the effects of nanofiller loading, surface area, and size on membrane performance, along with active layer physico-chemical properties, were characterized in TFN membranes incorporated with Linde Type A (LTA) zeolite and zeolitic imidazole framework-8 (ZIF-8). Results show that nanofiller incorporation up to ~0.15 wt% resulted in higher water permeance and unchanged salt rejection, above which salt rejection decreased 0.9–25.6 % and 26.1–48.3 % for LTA-TFN and ZIF-8-TFN membranes, respectively. Observed changes in active layer physico-chemical properties were generally unsubstantial and did not explain observed changes in TFN membrane performance. Therefore, increased water permeance in TFN membranes could be due to preferential water transport through porous structures of nanofillers or along polymer-nanofiller interfaces. These findings offer new insights into the development of high-performance TFN membranes for water/ion separations.

42 ENGINEERING↗

Machine learning models of intermittent operation of RO wellhead water treatment for salinity reduction and nitrate removal

Machine learning models were developed for intermittent multi-mode operation of a wellhead reverse osmosis water purification and desalination system to predict salt passage, nitrate passage, and permeate flux. The models, based on long short-term memory (LSTM) recurrent neural network (RNN) architecture, included an attention mechanism to increase model performance in proximity of the regulatory limit for nitrate. Training and testing of the models for the Startup, Production, Shutdown and Flushing operational modes were based on operational data (consisting of 22 process variables per data sample) acquired every 2–5 s over a six-month period. The significant sets of model input attributes for the different operational modes were assessed via Spearman ranking correlation, Self-Organizing Map (SOM) analysis and feed forward feature selection (FFFS). Although the variability of nitrate passage, salt passage and permeate flux was significant over the four operational modes, prediction performance for the three outcomes were with R2 and Average Absolute Relative Error (AARE) of 0.78–0.95 and 2.96–6.16 %, respectively. Model updates post membrane elements replacement demonstrated similar levels of prediction accuracy. The study results suggest that there is merit in exploring the utility of multi-mode models for sensor fault detection, data imputation, and for potential use in model-predictive control.

Intermittent RO operation↗

Cell-Type-Specific Profiling of Gene Expression and Chromatin Binding without Cell Isolation: Assaying RNA Pol II Occupancy in Neural Stem Cells

Cell-type-specific transcriptional profiling often requires the isolation of specific cell types from complex tissues. We have developed ‘‘TaDa,’’ a technique that enables cell-specific profiling without cell isolation. TaDa permits genome-wide profiling of DNA- or chromatin-binding proteins without cell sorting, fixation, or affinity purification. The method is simple, sensitive, highly reproducible, and transferable to any model system. We show that TaDa can be used to identify transcribed genes in a celltype-specific manner with considerable temporal precision, enabling the identification of differential gene expression between neuroblasts and the neuroepithelial cells from which they derive. We profile the genome-wide binding of RNA polymerase II in these adjacent, clonally related stem cells within intact Drosophila brains. Our data reveal expression of specific metabolic genes in neuroepithelial cells, but not in neuroblasts, and highlight gene regulatory networks that may pattern neural stem cell fates.

59 BASIC BIOLOGICAL SCIENCES↗

TiO{sub 2}-based photocatalytic disinfection of microbes in aqueous media: A review

The TiO{sub 2} based photocatalyst has great potential for the disinfection/inactivation of harmful pathogens (such as E.coli in aqueous media) along with its well-known usefulness on various chemical pollutants. The disinfection property of TiO{sub 2} is primarily attributed to surface generation of reactive oxygen species (ROS) as well as free metal ions formation. Furthermore, its disinfection capacity and overall performance can be significantly improved through modifications of the TiO{sub 2} material. In this review, we provide a brief survey on the effect of various TiO{sub 2} materials in the disinfection of a wide range of environmentally harmful microbial pathogens (e.g., bacteria, fungi, algae, and viruses) in aqueous media. The influencing factors (such as reactor design, water chemistry, and TiO{sub 2} modifications) of such processes are discussed along with the mechanisms of such disinfection. It is believed that the combined application of disinfection and decontamination will greatly enhance the utilization of TiO{sub 2} photocatalyst as a potential alternative to conventional methods of water purification. - Highlights: • The advent of industrialization jeopardized the quality of drinking water. • TiO{sub 2} photocatalysis holds promise both in the degradation of pollutants and for disinfection. • The applicability of TiO{sub 2}-based decontamination is explored for microbial disinfection. • Here we provide a comprehensive review on titania-based photocatalysts for disinfection.

54 ENVIRONMENTAL SCIENCES↗

Challenges for tree officers to enhance the provision of regulating ecosystem services from urban forests

Urbanisation and a changing climate are leading to more frequent and severe flood, heat and air pollution episodes in Britain's cities. Interest in nature-based solutions to these urban problems is growing, with urban forests potentially able to provide a range of regulating ecosystem services such as stormwater attenuation, heat amelioration and air purification. The extent to which these benefits are realized is largely dependent on urban forest management objectives, the availability of funding, and the understanding of ecosystem service concepts within local governments, the primary delivery agents of urban forests. This study aims to establish the extent to which British local authorities actively manage their urban forests for regulating ecosystem services, and identify which resources local authorities most need in order to enhance provision of ecosystem services by Britain's urban forests. Interviews were carried out with staff responsible for tree management decisions in fifteen major local authorities from across Britain, selected on the basis of their urban nature and high population density. Local authorities have a reactive approach to urban forest management, driven by human health and safety concerns and complaints about tree disservices. There is relatively little focus on ensuring provision of regulating ecosystem services, despite awareness by tree officers of the key role that urban forests can play in alleviating chronic air pollution, flood risk and urban heat anomalies. However, this is expected to become a greater focus in future provided that existing constraints – lack of understanding of ecosystem services amongst key stakeholders, limited political support, funding constraints – can be overcome. Our findings suggest that the adoption of a proactive urban forest strategy, underpinned by quantified and valued urban forest-based ecosystem services provision data, and innovative private sector funding mechanisms, can facilitate a change to a proactive, ecosystem services approach to urban forest management. - Highlights: • British urban forests are managed reactively, in response to risks and complaints. • Tree officers are aware of urban forests’ delivery of regulating ecosystem services. • Limited funding and lack of political support are obstacles to a proactive approach. • Awareness raising via ecosystem service valuation and strategic planning is needed. • Research into a public-private urban forest funding model would be beneficial.

54 ENVIRONMENTAL SCIENCES↗

Rhenium Isotope Reconnaissance of Uranium Ore Concentrates

Exploration of natural isotopic variations of the element rhenium (Re) is in its infancy, with initial studies revealing isotopic fractionation in a variety of geological materials. Here, in this work, we investigate Re isotope variation as a new geochemical tool, given its redox-sensitive properties and affinity for organic matter and sulfides. In this work, Re abundance and isotope ratio data were collected from uranium ore concentrates (UOCs) across a variety of depositional ages, locations, geologic settings, and deposit types. Ore types from which the UOC were derived include sandstone, unconformity, and quartz-pebble (QP) conglomerate. To isolate Re from the U-rich matrix of UOCs, a new purification method utilizing DGA ion exchange resin was developed. We found that UOCs exhibit a wide range of Re isotope ratios, with sandstone ore-derived UOCs having the isotopically lightest values, QP conglomerate ore-derived UOCs having the heaviest, and unconformity ore-derived UOCs in between (with some overlap with sandstone UOCs). The Re isotope ratio range observed in UOCs extends previously reported values by more than a factor of two. Industrial processing (e.g., incomplete recovery of Re from ore, contamination, fractionation during processing) may play a role in the isotopic variability in the UOCs. However, systematic differences between ore types suggest that the depositional setting is a significant factor. For nuclear forensic investigations, Re isotopic compositions combined with data from other isotopic systems provide geochemical signatures that can aid in provenance assessment of UOCs. Regardless of the specific causes for the wide range of Re isotope ratios in UOCs, these initial data indicate Re is a promising tool for nuclear forensic investigations on samples from early in the nuclear fuel cycle.

58 GEOSCIENCES↗

Microwave-driven synthesis and modification of nanocarbons and hybrids in liquid and solid phases

Over the past 20 years, nanocarbons have become more significant as nanostructured fillers in composites and, more recently, as functional elements in a brand-new class of hybrid materials. Microwave-assisted synthesis and processing is a burgeoning subject matter in materials research with significant strides in the realm of nanocarbon during the last decade. Here, the review examines recent approaches to producing various nanocarbons using microwaves as energy sources, the characterization of such materials for various applications, and their results. The underlying factors supporting the increased performance of such materials or their composites are analyzed and reaction mechanisms are presented wherever necessary. In particular, the recently developed and verified approaches to produce porous carbon materials, CNTs and fibers, carbon nanospheres, carbon dots, CQDs, reduced graphene oxide, nanocarbon hybrid materials, and the purification and modification of CNTs are discussed. The reduction of graphene oxide and the preparation of graphene derivative hybrids using solid-state and liquid-state routes such as polyopl, mixed solvents, ionic liquids, and microwave-assisted hydrothermal/solvothermal methods are analyzed in detail. In addition, the principles of microwave heating in liquid and solid states, the use of metals particles as arcing agents or catalysts, and carbonaceous materials as internal or external susceptors during synthesis and modifications are presented in detail.

25 ENERGY STORAGE↗

Accessing sequence specific hybrid peptoid oligomers with varied pendant group spacing

The synthesis of β-peptoids (i.e., N-substituted β-alanine oligomers) 10 or more residues in length has proven challenging owing to poor coupling efficiency even after extended reaction times, resulting in the substantial generation of deletion sequences and consequently making purification of the target oligomer challenging. To overcome the limitations of conventional approaches, in this report we examine a synthetic method to rapidly yield sequence specific β- and γ-peptoids with 4–20 repeat units in high purity via alternating monomer addition and deprotection reactions using Fmoc-protected, N-substituted β-alanine- and γ-aminobutyric acid-based monomers in conjunction with microwave-assisted automated solid phase synthesis. By decoupling the secondary amine generation and the oligomer synthesis, this approach circumvents the relatively low reaction efficiency of primary amine alkylation with halogenated propionic or butyric acid to afford secondary amines while retaining the pendant group chemical diversity offered by α-peptoids. We establish the compatibility of this technique with conventional Fmoc-peptide and ‘submonomer’ peptoid syntheses by fabricating several hybrid oligomer sequences including long β- and γ-peptoid oligomers in addition to hybrid α/β, β/peptide, and α/β/γ-systems, thereby confirming the capacity for this approach to yield oligomers with a backbone spacing of three or more atoms between any two residues. Additionally, we demonstrate that mixtures of aromatic amine- and aldehyde-bearing β-peptoids undergo rapid dynamic covalent assembly to afford oligomeric molecular ladders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗