Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

A High-Pressure Shock Tube Study of Hydrogen and Ammonia Addition to Natural Gas for Reduced Carbon Emissions in Power Generation Gas Turbines

Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000-1500 K near a constant pressure of 25 bar. Mixtures were kept undiluted to replicate the same chemistry pathways seen in gas turbine combustion chambers. Recorded combustion pressures exceeded 200 bar due to the large energy release, hence why these were performed at the high-pressure shock tube facility. The data is compared to the predictions of the NUIGMech 1.1 mechanism for chemical kinetic model validation and refinement. An exceptional agreement was shown for stoichiometric conditions in all cases but strayed at lean and rich equivalence ratios, especially in the lower temperature regime of H2 addition and all temperature ranges of the baseline NG mixture. Hydrogen addition also decreased ignition delay times by nearly 90%, while NH3 fuel addition made no noticeable difference in ignition delay time. NG/NH3 exhibited similar chemistry to pure NG under the same conditions, which is shown in a sensitivity analysis, demonstrating hydrogen chemistry to be dominant in NG/H2 mixtures and hydrocarbon chemistry to be dominant in NG/NH3 mixtures. The reaction CH3 + O2 = CH3O + O is identified and suggested as a possible modification target to improve model performance. Increasing the robustness of chemical kinetic models via experimental validation will directly aid in designing next-generation combustion chambers for use in gas turbines, which in turn will greatly lower global emissions and reduce greenhouse effects.

Pierro, Michael↗

Final Report on "Collaborative Research to Narrow Uncertainties in Precipitation and the Hydrological Cycle in Climate Models"

The central objectives of this work have been to explore and improve the depiction of precipitation and related processes in climate models by developing and analyzing observations and their gridded analyses, and developing new approaches and metrics. All three groups worked with the NCAR-based Community Earth System Model (CESM) and international community Climate Model Inter-comparison Project version 5 (CMIP5) models in various ways. At NCAR and SUNYA an initial focus was on the observational record, including updating of the river discharge dataset. A major focus at NCAR was extensive work on new datasets of hourly precipitation from CMORPH (observations) and CESM, and commentary on and validation of the CESM. SUNYA contributed to the comparison and evaluation of existing precipitation products widely used in climate research, the analysis of precipitation characteristics in CESM and other CMIP5 models, and decadal precipitation variability associated with decadal variability. At NCAR and SUNYA work was focused on the frequency and intensity of precipitation, including their dependence on the temporal and spatial resolution of the data used to calculate the frequency and intensity, as well as additional analyses on the effects of precipitation data uncertainties on the estimated historical drying trends. LLNL focused on the diurnal cycle. New insights have resulted in the characteristics of precipitation (frequency, intensity, amount, duration, diurnal cycle, covariability in space and time) and evaluation of these in models. In general models perform poorly and this provides a much-needed focus on what aspects of models are greatly in need of improvement. A substantial number of papers have now been published on these topics. The focus on the characteristics of precipitation and not just amount also provides a natural entrée into examining the extremes of precipitation, that are very important to the general public in terms of impacts. Examples are the deluges from Florence and Harvey, and extensive work has been performed on the latter. On the other side of the coin, considerable work has been performed on dry spells and drought, including improvements in a drought index. There has been considerable outreach to the general public, especially through the media, but also via talks and lectures, and a strong educational component at SUNYA. For example, the Harvey paper has an altimetrics rating of 827 and is the highest for any paper from that journal, it is at the 99th percentile of all papers of the same age, and is in the top 95 percent of all papers. The energy cycle and ocean heat content has been another focus. The entire atmospheric energy cycle has been reformulated and applied to the latest data to include effects from the enthalpy of precipitation. Relationships between ocean heat content and sea level rise have also been extensively explored in observations and models, with new insights into the role of Mount Pinatubo volcanic eruption on distorting and hiding the accelerating sea level rise. This work has been also widely featured in news media. The “year without a summer” has also been explored in the past using models, and how changes in the vertical structure and stability of the ocean with a warming climate may influence a future such volcanic event by amplifying the surface temperature response.

58 GEOSCIENCES↗

Uncertain role of clouds in shaping summertime atmosphere-sea ice connections in reanalyses and CMIP6 models

Downwelling longwave radiation (DLR) driven by the atmospheric and cloud conditions in the troposphere is suggested to be a dominant factor to determine the summertime net surface energy budget over the Arctic Ocean and thus plays a key role to shape the September sea ice. We use reanalyses and the self-organizing map (SOM) method to distinguish CMIP6 model performance in replicating the observed strong atmosphere-DLR connection. We find all models can reasonably simulate the linkage between key atmosphere variables and the clear sky DLR but behave differently in replicating the atmosphere-DLR connection due to cloud forcing. In ERA5 and strongly coupled models, tropospheric high pressure is associated with decreased clouds in the mid- and high-levels and increased clouds near the surface. This out-of-phase structure indicates that DLR cloud forcing is nearly neutral, making the clear sky DLR more important to bridge JJA circulation to late-summer sea ice. In MERRA-2 and weakly coupled models, tropospheric clouds display a vertically homogeneous reduction; the cloud DLR is thus strongly reduced due to the cooling effect, which partially cancels out the clear sky DLR and makes the total DLR less efficient to translate circulation forcing to sea ice. The differences of cloud vertical distribution in CMIP6 appear to be differentiated by circulation related relative humidity. Therefore, a better understanding of the discrepancy of different reanalyses and remote sensing products is critical to comprehensively evaluate simulated interactions among circulation, clouds, sea ice and energy budget at the surface in summer.

54 ENVIRONMENTAL SCIENCES↗

Dissipation Scaled Internal Wave Drag in a Global Heterogeneously Coupled Internal/External Mode Total Water Level Model

This study showcases a global, heterogeneously coupled total water level system wherein salinity and temperature outputs from a coarser-resolution (~12 km) ocean general circulation model are used to calculate density-driven terms within a global, higher-resolution (~2.5 km) depth-averaged total water level model. We demonstrate that the inclusion of baroclinic forcing in the barotropic model requires modification of the internal wave drag term to prevent excess degradation of tidal results compared to the barotropic model. By scaling the internal tide dissipation by an easy to calculate dissipation ratio, the resulting heterogeneously coupled model has complex root mean square errors (RMSE) of 2.27 cm in the deep ocean and 12.16 cm in shallow waters for the M 2 tidal constituent. While this represents a 10%–20% deterioration as compared to the barotropic model, the improvements in total water level prediction more than offset this degradation. Global median RMSE compared to observations of total water levels, 30-day sea levels, and non-tidal residuals improve by 1.86 (18.5%), 2.55 (42.5%), and 0.36 (5.3%) cm respectively. The drastic improvement in model performance highlights the importance of including density-driven effects within global hydrodynamic models and will help to improve the results of both hindcasts and forecasts in modeling extreme and nuisance flooding. With only an 11% increase in model run time compared to the fully barotropic total water level model, this approach paves the way for high resolution coastal water level and flood models to be used alongside climate models, improving operational forecasting of total water levels.

Blakely, Coleman Peter [University of Notre Dame, ↗

Systematic Benchmarking of Climate Models: Methodologies, Applications, and New Directions

As climate models become increasingly complex, there is a growing need to comprehensively and systematically assess model performance with respect to observations. Given the increasing number and diversity of climate model simulations in use, the community has moved beyond simple model intercomparison and toward developing methods capable of benchmarking a large number of simulations against a suite of climate metrics. Here, we present a detailed review of evaluation and benchmarking methods and approaches developed in the last decade, focusing primarily on scientific implications for Coupled Model Intercomparison Project (CMIP) simulations and CMIP6 results that contributed to the Intergovernmental Panel on Climate Change (IPCC) Sixth Assessment Report (AR6). Based on this review, we explain the resulting contemporary philosophy of model benchmarking, and provide clear distinctions and definitions of the terms model verification, process validation, evaluation, and benchmarking. While significant progress has been made in model development based on systematic evaluation and benchmarking efforts, some climate system biases still remain. The development of open‐source community software packages has played a fundamental role in identifying areas of significant model improvement and bias reduction. We review the key features of several software packages that have been commonly used over the past decade to evaluate and benchmark global and regional climate models. Additionally, we discuss best practices for the selection of evaluation and benchmarking metrics and for interpreting the obtained results, the importance of selecting suitable sources of reference data and accurate uncertainty quantification.

Environmental sciences↗

Transfer learning for analysis of collective and non-collective Thomson scattering spectra

Thomson scattering (TS) diagnostics provide reliable, minimally perturbative measurements of fundamental plasma parameters, such as electron density (⁠n e ) and electron temperature (⁠T e ⁠). Deep neural networks can provide accurate estimates of ⁠n e and T e when conventional fitting algorithms may fail, such as when TS spectra are dominated by noise, or when fast analysis is required for real-time operation. Although deep neural networks typically require large training sets, transfer learning can improve model performance on a target task with limited data by leveraging pre-trained models from related source tasks, where select hidden layers are further trained using target data. We present five architecturally diverse deep neural networks, pre-trained on synthetic TS data and adapted for experimentally measured TS data, to evaluate the efficacy of transfer learning in estimating n e and T e in both the collective and non-collective scattering regimes. We evaluate errors in n e and T e estimates as a function of training set size for models trained with and without transfer learning, and we observe decreases in model error from transfer learning when the training set contains ≲ 200 experimentally measured spectra.

Artificial neural networks↗

Inflation with primordial broken power law spectrum as an alternative to the concordance cosmological model

We consider cosmological models with a non-scale-invariant spectrum of primordial perturbations and assess whether they represent a viable alternative to the concordance {Lambda}CDM model. We find that in the framework of a model selection analysis, the WMAP and 2dF data do not provide any conclusive evidence in favor of one or the other kind of model. However, when a marginalization over the entire space of nuisance parameters is performed, models with a modified primordial spectrum and {Omega}{sub {Lambda}=}0 are strongly disfavored.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Understanding water and energy fluxes in the Amazonia: Lessons from an observation‐model intercomparison

Abstract Tropical forests are an important part of global water and energy cycles, but the mechanisms that drive seasonality of their land‐atmosphere exchanges have proven challenging to capture in models. Here, we (1) report the seasonality of fluxes of latent heat (LE), sensible heat ( H ), and outgoing short and longwave radiation at four diverse tropical forest sites across Amazonia—along the equator from the Caxiuanã and Tapajós National Forests in the eastern Amazon to a forest near Manaus, and from the equatorial zone to the southern forest in Reserva Jaru; (2) investigate how vegetation and climate influence these fluxes; and (3) evaluate land surface model performance by comparing simulations to observations. We found that previously identified failure of models to capture observed dry‐season increases in evapotranspiration (ET) was associated with model overestimations of (1) magnitude and seasonality of Bowen ratios (relative to aseasonal observations in which sensible was only 20%–30% of the latent heat flux) indicating model exaggerated water limitation, (2) canopy emissivity and reflectance (albedo was only 10%–15% of incoming solar radiation, compared to 0.15%–0.22% simulated), and (3) vegetation temperatures (due to underestimation of dry‐season ET and associated cooling). These partially compensating model‐observation discrepancies (e.g., higher temperatures expected from excess Bowen ratios were partially ameliorated by brighter leaves and more interception/evaporation) significantly biased seasonal model estimates of net radiation ( R n ), the key driver of water and energy fluxes (LE ~ 0.6 R n and H ~ 0.15 R n ), though these biases varied among sites and models. A better representation of energy‐related parameters associated with dynamic phenology (e.g., leaf optical properties, canopy interception, and skin temperature) could improve simulations and benchmarking of current vegetation–atmosphere exchange and reduce uncertainty of regional and global biogeochemical models.

Restrepo‐Coupe, Natalia↗

Summary Report on the Refined User Requirements for U.S. Fusion Prototypic Neutron Source

The Fusion Prototypic Neutron Source (FPNS) is proposed as an urgent near-term facility necessary for understanding D-T fusion neutron degradation processes in materials and for the development of high-performance radiation tolerant materials for fusion power reactors. This facility is central to our goal of predicting the behavior of materials in the harsh D-T neutron environment and calibrating and verifying the materials performance models necessary to support design of next-generation fusion reactors. Key FPNS performance metrics were previously defined for the cost-efficient facility necessary to adequately and expediently resolve key materials science knowledge gaps required to move to next-step fusion devices. This brief report is intended to expand upon this previous metrics discussion as an aid to selecting the most desirable FPNS concept and enabling a facility that meets the program needs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Defect Thermodynamics and Transport Properties of Proton Conducting Perovskite Electrode and Electrolyte Materials Evaluated Based on Density Functional Theory Modeling

Both electron-rich and electron-poor perovskite oxides have been used in solid oxide cell applications as electrode and electrolyte materials. The rich oxygen defect chemistry and its coupling to temperature, hydrogen-steam or oxygen-steam gas pressure, or to the applied potentials creates enormous complexities for modeling performance and degradation of the materials. Herein, density functional theory-based thermodynamic modeling was carried out to describe the defect chemistry and transport properties of the proton-conducting electrolyte BaZr1-xYxO3-δ (x≤0.1) and of the triple-conducting perovskite (La,Ba)(Fe,M)O3-δ (M=Y and Zr). The defect thermodynamics of intrinsic point defects and the hydrogen-related defect reactions were solved in integrated defect models and further used to predict the Brouwer diagram and the transport properties of the functional perovskites. For the electron-poor electrolytes BaZr0.9Y0.1O3-δ, the developed model has been used to describe the experimental transport properties in the SOC operating conditions. Specifically, the roles played by the acceptor-bound holes and the intrinsic and hydrogen point defects upon the conductivities of holes, protons, and oxygen vacancies under the hydrogen-rich and oxygen-rich conditions at various humidity levels were demonstrated. A defect modeling tool was also developed for the triple-conducting perovskite (La,Ba)(Fe,M)O3-δ (M=Y and Zr) to examine magnetic effects and hydride defects in defect equilibria.

defect thermodynamics↗

Divergent predictions of carbon storage between two global land models: Attribution of the causes through traceability analysis

Representations of the terrestrial carbon cycle in land models are becoming increasingly complex. It is crucial to develop approaches for critical assessment of the complex model properties in order to understand key factors contributing to models' performance. In this study, we applied a traceability analysis which decomposes carbon cycle models into traceable components, for two global land models (CABLE and CLM-CASA') to diagnose the causes of their differences in simulating ecosystem carbon storage capacity. Driven with similar forcing data, CLM-CASA' predicted – 31 % larger carbon storage capacity than CABLE. Since ecosystem carbon storage capacity is a product of net primary productivity (NPP) and ecosystem residence time ( τ E ), the predicted difference in the storage capacity between the two models results from differences in either NPP or τ E or both. Our analysis showed that CLM-CASA'simulated 37 % higher NPP than CABLE. On the other hand, τ E , which was a function of the baseline carbon residence time ( τ ' E ) and environmental effect on carbon residence time, was on average 11 years longer in CABLE than CLM-CASA'. This difference in τ E was mainly caused by longer τ ' E of woody biomass (23 vs. 14 years in CLM-CASA'), and higher proportion of NPP allocated to woody biomass (23 vs. 16 %). Differences in environmental effects on carbon residence times had smaller influences on differences in ecosystem carbon storage capacities compared to differences in NPP and τ ' E . Altogether, the traceability analysis showed that the major causes of different carbon storage estimations were found to be parameters setting related to carbon input and baseline carbon residence times between two models.

54 ENVIRONMENTAL SCIENCES↗

Technoeconomic Opportunity Analysis for Local Power Generation in Falls City, Nebraska

Falls City is a small community in Nebraska interested in understanding how energy from local energy systems could support the community's economic development planning. To address the current community needs and address the future energy demand technical assistance conducted through the Communities Local Energy Action Program (Communities LEAP) assessed the technical and economic opportunities of adding energy technologies to Falls City's municipally owned and operated electric utility system. The modeling performed considered the technical and economic feasibility of technologies using the System Advisor Model (SAM). The modeling explored three technology configurations using multiple years of historical weather and wholesale cost data (2015-2022 & a typical meteorological year), and two different wholesale escalation rates (0.3% and 2.5%). Wholesale energy prices were based on the Southwest Power Pool's (SPP) real-time energy market and the annual escalation rates of these rates based on historical SPP wholesale and national retail electricity price trends. Results from the modeling showed that at current CAPEX costs and SPP wholesale electricity costs no technology combination averaged across the scenarios run provide a positive net present value (NPV). External financial support, changes in market conditions, and additional revenue streams would help create more economically favorable projects. As conditions change re-evaluation may be necessary.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Models and techniques for evaluating the effectiveness of aircraft computing systems

The development of system models that can provide a basis for the formulation and evaluation of aircraft computer system effectiveness, the formulation of quantitative measures of system effectiveness, and the development of analytic and simulation techniques for evaluating the effectiveness of a proposed or existing aircraft computer are described. Specific topics covered include: system models; performability evaluation; capability and functional dependence; computation of trajectory set probabilities; and hierarchical modeling of an air transport mission.

Meyer, J. F.↗

3D inelastic analysis methods for hot section components

The objective is to develop analytical tools capable of economically evaluating the cyclic time dependent plasticity which occurs in hot section engine components in areas of strain concentration resulting from the combination of both mechanical and thermal stresses. Three models were developed. A simple model performs time dependent inelastic analysis using the power law creep equation. The second model is the classical model of Professors Walter Haisler and David Allen of Texas A and M University. The third model is the unified model of Bodner, Partom, et al. All models were customized for linear variation of loads and temperatures with all material properties and constitutive models being temperature dependent.

Dame, L. T.↗

HPF Implementation of NPB2.3

We present the HPF implementation of BT, SP, LU, FT, and MG of NPB2.3-serial benchmark set, The implementation is based on HPF performance model of the benchmark specific operations with distributed arrays. We present profiling and performance data on SGI origin 2000 and compare the results with NPB2.3. We discuss advantages and limitations of HPF and pghpf compiler.

Frumkin, Michael↗

Satellite-Based Spatiotemporal Trends in PM2.5 Concentrations: China 2004-2013

Three decades of rapid economic development is causing severe and widespread PM2.5(particulate matter (is) less than 2.5 ) pollution in China. However, research on the health impacts of PM2.5 exposure has been hindered by limited historical PM2.5 concentration data. We estimated ambient PM2.5 concentrations from 2004 to 2013 in China at 0.1 deg resolution using the most recent satellite data and evaluated model performance with available ground observations. We developed a two-stage spatial statistical model using the Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 6 aerosol optical depth (AOD) and assimilated meteorology, land use data, and PM2.5 concentrations from China's recently established ground monitoring network. An inverse variance weighting (IVW) approach was developed to combine MODIS Dark Target and Deep Blue AOD to optimize data coverage. We evaluated model predicted PM2.5 concentrations from 2004 to early 2014 using ground observations. The overall model cross-validation R(sup 2) and relative prediction error were 0.79 and 35.6%, respectively. Validation beyond the model year (2013) indicated that it accurately predicted PM(sub 2.5) concentrations with little bias at the monthly (R(sup 2) = 0.73), regression slope = 0.91) and seasonal (R(sup 2) = 0.79), regression slope = 0.92) levels. Seasonal variations revealed that winter was the most polluted season and that summer was the cleanest season. Analysis of predicted PM2.5 levels showed a mean annual increase of 1.97 micro-g/cu cm between 2004 and 2007 and a decrease of 0.46 micro-g/cu cm between 2008 and 2013. Our satellite-driven model can provide reliable historical PM2.5 estimates in China at a resolution comparable to those used in epidemiologic studies on the health effects of long-term PM2.5 exposure in North America. This data source can potentially advance research on PM2.5 health effects in China.

satellite remote sensing↗

Regional Replay: A Unique Reanalysis-Based Tool for Addressing Model Error

Understanding and correcting errors in general circulation and climate models has long been part intuition and part trial and error. Efforts to diagnose the errors and provide some guidance to developers have been of some value, though such efforts, with few exceptions, have been more successful in identifying and documenting the errors in the model simulations rather than the model deficiencies that produced them. Modern atmospheric reanalyses such as MERRA-2 provide much-improved estimates of our climate system at hourly to interannual and longer time scales and have become an important tool for assessing model performance. Here we use MERRA-2 to address biases in the NASA/GMAO GEOS model by employing a "regional replay" approach developed in the GMAO. The regional replay approach constrains the model to remain close to the reanalysis over arbitrary regions and selected model variables, thus allowing us to examine how model error generated over one area is spatially translated across the globe. Several examples are given including an assessment of the global impact of errors produced over the Tibet region.

Tibet Region↗

Creating Systems Engineering Products with Executable Models in a Model-Based Engineering Environment

Applying systems engineering across the life-cycle results in a number of products built from interdependent sources of information using different kinds of system level analysis. This paper focuses on leveraging the Executable System Engineering Method (ESEM) which automates requirements verification (e.g. power and mass budget margins and duration analysis of operational modes) using executable SysML models. The particular value proposition is to integrate requirements, and executable behavior and performance models for certain types of system level analysis. The models are created with modeling patterns that involve structural, behavioral and parametric diagrams, and are managed by an open source Model Based Engineering Environment (named OpenMBEE). This paper demonstrates how the ESEM is applied in conjunction with OpenMBEE to create key engineering products (e.g. operational concept document) for the Alignment and Phasing System (APS) within the Thirty Meter Telescope (TMT) project, which is under development by the TMT International Observatory (TIO).

MBSE↗