Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Modeling the formation and aging of secondary organic aerosols in Los Angeles during CalNex 2010

Four different literature parameterizations for the formation and evolution of urban secondary organic aerosol (SOA) frequently used in 3-D models are evaluated using a 0-D box model representing the Los Angeles metropolitan region during the California Research at the Nexus of Air Quality and Climate Change (CalNex) 2010 campaign. We constrain the model predictions with measurements from several platforms and compare predictions with particle- and gas-phase observations from the CalNex Pasadena ground site. That site provides a unique opportunity to study aerosol formation close to anthropogenic emission sources with limited recirculation. The model SOA that formed only from the oxidation of VOCs (V-SOA) is insufficient to explain the observed SOA concentrations, even when using SOA parameterizations with multi-generation oxidation that produce much higher yields than have been observed in chamber experiments, or when increasing yields to their upper limit estimates accounting for recently reported losses of vapors to chamber walls. The Community Multiscale Air Quality (WRF-CMAQ) model (version 5.0.1) provides excellent predictions of secondary inorganic particle species but underestimates the observed SOA mass by a factor of 25 when an older VOC-only parameterization is used, which is consistent with many previous model–measurement comparisons for pre-2007 anthropogenic SOA modules in urban areas. Including SOA from primary semi-volatile and intermediate-volatility organic compounds (P-S/IVOCs) following the parameterizations of Robinson et al. (2007), Grieshop et al. (2009), or Pye and Seinfeld (2010) improves model–measurement agreement for mass concentration. The results from the three parameterizations show large differences (e.g., a factor of 3 in SOA mass) and are not well constrained, underscoring the current uncertainties in this area. Our results strongly suggest that other precursors besides VOCs, such as P-S/IVOCs, are needed to explain the observed SOA concentrations in Pasadena. All the recent parameterizations overpredict urban SOA formation at long photochemical ages (≈ 3 days) compared to observations from multiple sites, which can lead to problems in regional and especially global modeling. However, reducing IVOC emissions by one-half in the model to better match recent IVOC measurements improves SOA predictions at these long photochemical ages. Among the explicitly modeled VOCs, the precursor compounds that contribute the greatest SOA mass are methylbenzenes. Measured polycyclic aromatic hydrocarbons (naphthalenes) contribute 0.7% of the modeled SOA mass. The amounts of SOA mass from diesel vehicles, gasoline vehicles, and cooking emissions are estimated to be 16–27, 35–61, and 19–35%, respectively, depending on the parameterization used, which is consistent with the observed fossil fraction of urban SOA, 71(±3) %. The relative contribution of each source is uncertain by almost a factor of 2 depending on the parameterization used. In-basin biogenic VOCs are predicted to contribute only a few percent to SOA. A regional SOA background of approximately 2.1 μg m −3 is also present due to the long-distance transport of highly aged OA, likely with a substantial contribution from regional biogenic SOA. The percentage of SOA from diesel vehicle emissions is the same, within the estimated uncertainty, as reported in previous work that analyzed the weekly cycles in OA concentrations (Bahreini et al., 2012; Hayes et al., 2013). However, the modeling work presented here suggests a strong anthropogenic source of modern carbon in SOA, due to cooking emissions, which was not accounted for in those previous studies and which is higher on weekends. Lastly, this work adapts a simple two-parameter model to predict SOA concentration and O/C from urban emissions. This model successfully predicts SOA concentration, and the optimal parameter combination is very similar to that found for Mexico City. This approach provides a computationally inexpensive method for predicting urban SOA in global and climate models. We estimate pollution SOA to account for 26 Tg yr −1 of SOA globally, or 17% of global SOA, one-third of which is likely to be non-fossil.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

Implications of Low Volatility SOA and Gas-Phase Fragmentation Reactions on SOA Loadings and their Spatial and Temporal Evolution in the Atmosphere

Recent laboratory and field measurements by a number of groups show that secondary organic aerosol (SOA) evaporates orders of magnitude slower than traditional models assume. In addition, chemical transport models using volatility basis set (VBS) SOA schemes neglect gas-phase fragmentation reactions, which are known to be extremely important. In this work, we present modeling studies to investigate the implications of non-evaporating SOA and gas-phase fragmentation reactions. Using the 3-D chemical transport model, WRF-Chem, we show that previous parameterizations, which neglect fragmentation during multi-generational gas-phase chemistry of semi-volatile/inter-mediate volatility organics ("aging SIVOC"), significantly over-predict SOA as compared to aircraft measurements downwind of Mexico City. In sharp contrast, the revised models, which include gas-phase fragmentation, show much better agreement with measurements downwind of Mexico City. We also demonstrate complex differences in spatial SOA distributions when we transform SOA to non-volatile secondary organic aerosol (NVSOA) to account for experimental observations. Using a simple box model, we show that for same amount of SOA precursors, earlier models that do not employ multi-generation gas-phase chemistry of precursors ("non-aging SIVOC"), produce orders of magnitude lower SOA than "aging SIVOC" parameterizations both with and without fragmentation. In addition, traditional absorptive partitioning models predict almost complete SOA evaporation at farther downwind locations for both "non-aging SIVOC" and "aging SIVOC" with fragmentation. In contrast, in our revised approach, SOA transformed to NVSOA implies significantly higher background concentrations as it remains in particle phase even under highly dilute conditions. This work has significant implications on understanding the role of multi-generational chemistry and NVSOA formation on SOA evolution in the atmosphere.

Shrivastava, ManishKumar B.↗
DOE OSTI2024

Understanding changes in cloud simulations from E3SM version 1 to version 2

Abstract. This study documents clouds simulated by the Energy Exascale Earth System Model (E3SM) version 2 (E3SMv2) and attempts to understand what causes the model behavior change in clouds relative to E3SMv1. This is done by analyzing the last 30-year (1985–2014) data from the 165-year historical simulations using E3SMv1 and v2 and four sensitivity tests to isolate the impact of changes in model parameter choices in its turbulence, shallow convection, and cloud macrophysics parameterization (Cloud Layers Unified By Binormals, CLUBB); microphysical parameterization (MG2); and deep-convection scheme (ZM), as well as model physics changes in convective triggering. It is shown that E3SMv2 significantly improves the simulation of subtropical coastal stratocumulus clouds and clouds with optical depth larger than 3.6 over the stratocumulus-to-cumulus transition regimes, where the shortwave cloud radiative effect (SWCRE) is also improved, and the Southern Ocean (SO) while seeing an overall slight degradation in low clouds over other tropical and subtropical oceans. The better performance in E3SMv1 over those regions is partially due to error compensation between its simulated optically thin and intermediate low clouds for which E3SMv2 actually improves simulation of optically intermediate low clouds. Sensitivity tests indicate that the changes in low clouds are primarily due to the tuning done in CLUBB. The impact of the ZM tuning is mainly on optically intermediate and thick high clouds, contributing to an improved SWCRE and longwave cloud radiative effect (LWCRE). The impact of the MG2 tuning and the new convective trigger is primarily on the high latitudes and the SO. They have a relatively smaller impact on clouds than CLUBB tuning and ZM tuning do. This study offers additional insights into clouds simulated in E3SMv2 by utilizing multiple data sets and the Cloud Feedback Model Intercomparison Project (CFMIP) Observation Simulator Package (COSP) diagnostic tool as well as sensitivity tests. The improved understanding will benefit future E3SM developments.

58 GEOSCIENCES↗
DOE OSTI2022

Improved Boundary Conditions for Coupled Geospace Models: An Application in Modeling Spacecraft Surface Charging Environment

Abstract Spacecraft surface charging in the inner magnetosphere often occurs in the pre‐midnight to the dawn sector when electron fluxes of tens of keV increase. Inner magnetosphere ring current models can be used to simulate/predict the spacecraft surface charging environment, with their outer boundary conditions specified either based on observations or provided by other models, such as MHD models. In the latter approach, using MHD quantities, the flux spectrum at the outer boundary is commonly assumed to follow a Kappa or Maxwellian distribution function. Such a method however often departs greatly from the realistic spectrum at E < tens of keV, a crucial energy range in the surface charging anomaly. In order to achieve a better representation of the surface charging environment, we propose to combine the MHD‐parameterized flux spectrum with an empirical electron flux model of E < 40 keV to set the electron flux boundary condition. Results indicate that as opposed to the case where the MHD‐parameterized flux distribution is solely used at the model boundary, simulations with the new boundary condition yields a more intense surface charging environment. The integrated electron flux between 10 < E < 50 keV, a measure of the severity of the surface charging environment, is significantly enhanced by 1‐2 orders of magnitude, leading to a much better agreement with Van Allen Probes measurements. This study hence demonstrates a reasonable solution to the setting of outer boundary conditions for inner magnetosphere models and is recommended for coupled geospace circulation models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

RADIATION HYDRODYNAMICS MODELS OF THE INNER RIM IN PROTOPLANETARY DISKS

Many stars host planets orbiting within a few astronomical units (AU). The occurrence rate and distributions of masses and orbits vary greatly with the host star’s mass. These close planets’ origins are a mystery that motivates investigating protoplanetary disks’ central regions. A key factor governing the conditions near the star is the silicate sublimation front, which largely determines where the starlight is absorbed, and which is often called the inner rim. We present the first radiation hydrodynamical modeling of the sublimation front in the disks around the young intermediate-mass stars called Herbig Ae stars. The models are axisymmetric and include starlight heating; silicate grains sublimating and condensing to equilibrium at the local, time-dependent temperature and density; and accretion stresses parameterizing the results of MHD magnetorotational turbulence models. The results compare well with radiation hydrostatic solutions and prove to be dynamically stable. Passing the model disks into Monte Carlo radiative transfer calculations, we show that the models satisfy observational constraints on the inner rim’s location. A small optically thin halo of hot dust naturally arises between the inner rim and the star. The inner rim has a substantial radial extent, corresponding to several disk scale heights. While the front’s overall position varies with the stellar luminosity, its radial extent depends on the mass accretion rate. A pressure maximum develops near the location of thermal ionization at temperatures of about 1000 K. The pressure maximum is capable of halting solid pebbles’ radial drift and concentrating them in a zone where temperatures are sufficiently high for annealing to form crystalline silicates.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

PROBING THE EXPANSION HISTORY OF THE UNIVERSE BY MODEL-INDEPENDENT RECONSTRUCTION FROM SUPERNOVAE AND GAMMA-RAY BURST MEASUREMENTS

To probe the late evolution history of the universe, we adopt two kinds of optimal basis systems. One of them is constructed by performing the principle component analysis, and the other is built by taking the multidimensional scaling approach. Cosmological observables such as the luminosity distance can be decomposed into these basis systems. These basis systems are optimized for different kinds of cosmological models that are based on different physical assumptions, even for a mixture model of them. Therefore, the so-called feature space that is projected from the basis systems is cosmological model independent, and it provides a parameterization for studying and reconstructing the Hubble expansion rate from the supernova luminosity distance and even gamma-ray burst (GRB) data with self-calibration. The circular problem when using GRBs as cosmological candles is naturally eliminated in this procedure. By using the Levenberg–Marquardt technique and the Markov Chain Monte Carlo method, we perform an observational constraint on this kind of parameterization. The data we used include the “joint light-curve analysis” data set that consists of 740 Type Ia supernovae and 109 long GRBs with the well-known Amati relation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Multi-scale assessment of a grassland productivity model

Grasslands provide many important ecosystem services globally, and projecting grassland productivity in the coming decades will provide valuable information to land managers. Productivity models can be well calibrated at local scales but generally have some maximum spatial scale in which they perform well. Here we evaluate a grassland productivity model to find the optimal spatial scale for parameterization and thus for subsequently applying it in future productivity projections for North America. We also evaluated the model on new vegetation types to ascertain its potential generality. We find the model most suitable when incorporating only grasslands, as opposed to also including agriculture and shrublands, and only in the Great Plains and eastern temperate forest ecoregions of North America. The model was not well suited to grasslands in North American deserts or northwest forest ecoregions. It also performed poorly in agriculture vegetation, likely due to management activities, and shrubland vegetation, likely because the model lacks representation of deep water pools. This work allows us to perform long-term projections in areas where model performance has been verified, with gaps filled in by future modeling efforts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

An omnipresent diversity and variability in the chemical composition of atmospheric functionalized organic aerosol

Abstract The atmospheric evolution of organic compounds encompasses many thousands of compounds with varying volatility, polarity, and water solubility. The molecular-level chemical composition of this mixture plays a major, yet uncertain, role in its transformations and impacts. Here we perform a non-targeted molecular-level intercomparison of functionalized organic aerosol from three diverse field sites and a chamber. Despite similar bulk composition, we report large molecular-level variability between multi-hour organic aerosol samples at each site, with 66 ± 13% of functionalized compounds differing between consecutive samples. Single precursor environmental laboratory chamber experiments and fully chemically-explicit modeling confirm this variability is due to changes in emitted precursors, chemical age, and/or oxidation conditions. These molecular-level results demonstrate greater compositional variability than is typically observed in less-speciated measurements, such as bulk elemental composition, which tend to show less daily variability. These observations should inform future field and laboratory studies, including assessments of the effects of variability on aerosol properties and ultimately the development of strategic organic aerosol parameterizations for air quality and climate models.

Ditto, Jenna C.↗
DOE OSTI2022

Bayesian Optimization Framework for Imperfect Data or Models

Conventional Bayesian optimization methods implicitly assume that the data and model being optimized are “perfect.” This assumption leads to inaccurate posterior probability distribution functions (PDFs) when applied to “imperfect” data or models. The new Bayesian optimization framework presented in this report provides a way to parameterize the effect of imperfections usually encountered in a prior PDF of generalized data or a model on the posterior PDF. The effects of imperfections are parameterized by a set of constraints imposed on the posterior expectation values of deviations between the data and the model and on their covariance matrix elements. A particular set of values for these constraints conveys an evaluator’s best estimate of the effect of imperfections on the corresponding posterior expectation values. When a prior PDF of generalized data is assumed to be normal, an expression for a posterior PDF satisfying an arbitrary set of constraints is derived analytically for linear models. An analogous iterative algorithm is given for nonlinear models. The corresponding posterior PDF should be used to estimate any posterior expectation values in the presence of imperfections parameterized by that set of constraints. A posterior PDF of a conventional Bayesian optimization method is recovered analytically when all evaluator-specified constraints are set to zero (i.e., in the absence of any imperfections). The analytical expressions derived in this report for normal PDFs and linear models were verified numerically by a Metropolis–Hastings Monte Carlo method. The methods presented herein could be applied to any kind of data or models, including differential cross-section data or integral benchmark experiments.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

The Fall and Rise of the Global Climate Model

Abstract Global models are an essential tool for climate projections, but conventional coarse‐resolution atmospheric general circulation models suffer from errors both in their parameterized cloud physics and in their representation of climatically important circulation features. A notable recent study by Terai et al. (2020, https://doi.org/10.1029/2020ms002274) documents a global model capable of reproducing the regime‐based effect of aerosols on cloud liquid water path expected from observational evidence. This may represent a significant advance in cloud process fidelity in global models. Such models can be expected to give a better estimate of the effective radiative forcing of the climate. If this advance in cloud process representation can be matched by advances in the representation of circulation features such as monsoons, then such models may also be able to navigate the complex tangle between spatially heterogeneous aerosol–cloud interactions and regional circulation patterns. This tight link between aerosol and circulation results in anthropogenic perturbations of climate variables of societal importance, such as regional rainfall distributions. Upcoming global models with km‐scale resolution may improve the regional circulation and be able to take advantage of the Terai et al. (2020, https://doi.org/10.1029/2020ms002274) improvement in cloud physics. If so, an era of significantly improved regional climate projection capabilities may soon dawn. If not, then the improvement in cloud physics might spur intensified efforts on problems in model dynamics. Either way, based on the rapid changes in aerosol emissions in the near future, learning to make reliable projections based on biased models is a skill that will not go out of style.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Memory-based parameterization with differentiable solver: Application to Lorenz ’96

Physical parameterizations (or closures) are used as representations of unresolved subgrid processes within weather and global climate models or coarse-scale turbulent models, whose resolutions are too coarse to resolve small-scale processes. These parameterizations are typically grounded on physically based, yet empirical, representations of the underlying small-scale processes. Machine learning-based parameterizations have recently been proposed as an alternative solution and have shown great promise to reduce uncertainties associated with the parameterization of small-scale processes. Yet, those approaches still show some important mismatches that are often attributed to the stochasticity of the considered process. This stochasticity can be due to coarse temporal resolution, unresolved variables, or simply to the inherent chaotic nature of the process. To address these issues, we propose a new type of parameterization (closure), which is built using memory-based neural networks, to account for the non-instantaneous response of the closure and to enhance its stability and prediction accuracy. We apply the proposed memory-based parameterization, with differentiable solver, to the Lorenz ’96 model in the presence of a coarse temporal resolution and show its capacity to predict skillful forecasts over a long time horizon of the resolved variables compared to instantaneous parameterizations. This approach paves the way for the use of memory-based parameterizations for closure problems.

Mathematics↗
DOE OSTI2020

Air quality impact of the Northern California Camp Fire of November 2018

The Northern California Camp Fire that took place in November 2018 was one of the most damaging environmental events in California history. Here, we analyze ground-based station observations of airborne particulate matter that has a diameter <2.5 µm (PM 2.5 ) across Northern California and conduct numerical simulations of the Camp Fire using the Weather Research and Forecasting model online coupled with chemistry (WRF-Chem). Simulations are evaluated against ground-based observations of PM 2.5 , black carbon, and meteorology, as well as satellite measurements, such as Tropospheric Monitoring Instrument (TROPOMI) aerosol layer height and aerosol index. The Camp Fire led to an increase in Bay Area PM 2.5 to over 50 µg m –3 for nearly 2 weeks, with localized peaks exceeding 300 µg m –3 . Using the Visible Infrared Imaging Radiometer Suite (VIIRS) high-resolution fire detection products, the simulations reproduce the magnitude and evolution of surface PM 2.5 concentrations, especially downwind of the wildfire. The overall spatial patterns of simulated aerosol plumes and their heights are comparable with the latest satellite products from TROPOMI. WRF-Chem sensitivity simulations are carried out to analyze uncertainties that arise from fire emissions, meteorological conditions, feedback of aerosol radiative effects on meteorology, and various physical parameterizations, including the planetary boundary layer model and the plume rise model. Downwind PM 2.5 concentrations are sensitive to both flaming and smoldering emissions over the fire, so the uncertainty in the satellite-derived fire emission products can directly affect the air pollution simulations downwind. Our analysis also shows the importance of land surface and boundary layer parameterization in the fire simulation, which can result in large variations in magnitude and trend of surface PM 2.5 . Inclusion of aerosol radiative feedback moderately improves PM 2.5 simulations, especially over the most polluted days. Results of this study can assist in the development of data assimilation systems as well as air quality forecasting of health exposures and economic impact studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2012

Simulation of the intraseasonal variability over the Eastern Pacific ITCZ in climate models

During boreal summer, convective activity over the eastern Pacific (EPAC) inter-tropical convergence zone (ITCZ) exhibits vigorous intraseasonal variability (ISV). Previous observational studies identified two dominant ISV modes over the EPAC, i.e., a 40-day mode and a quasi-biweekly mode (QBM). The 40-day ISV mode is generally considered a local expression of the Madden-Julian Oscillation. However, in addition to the eastward propagation, northward propagation of the 40-day mode is also evident. The QBM mode bears a smaller spatial scale than the 40-day mode, and is largely characterized by northward propagation. While the ISV over the EPAC exerts significant influences on regional climate/weather systems, investigation of contemporary model capabilities in representing these ISV modes over the EPAC is limited. In this study, the model fidelity in representing these two dominant ISV modes over the EPAC is assessed by analyzing six atmospheric and three coupled general circulation models (GCMs), including one super-parameterized GCM (SPCAM) and one recently developed high-resolution GCM (GFDL HIRAM) with horizontal resolution of about 50 km. While it remains challenging for GCMs to faithfully represent these two ISV modes including their amplitude, evolution patterns, and periodicities, encouraging simulations are also noted. In general, SPCAM and HIRAM exhibit relatively superior skill in representing the two ISV modes over the EPAC. While the advantage of SPCAM is achieved through explicit representation of the cumulus process by the embedded 2-D cloud resolving models, the improved representation in HIRAM could be ascribed to the employment of a strongly entraining plume cumulus scheme, which inhibits the deep convection, and thus effectively enhances the stratiform rainfall. The sensitivity tests based on HIRAM also suggest that fine horizontal resolution could also be conducive to realistically capture the ISV over the EPAC, particularly for the QBM mode. Further analysis illustrates that the observed 40-day ISV mode over the EPAC is closely linked to the eastward propagating ISV signals from the Indian Ocean/Western Pacific, which is in agreement with the general impression that the 40-day ISV mode over the EPAC could be a local expression of the global Madden-Julian Oscillation (MJO). In contrast, the convective signals associated with the 40-day mode over the EPAC in most of the GCM simulations tend to originate between 150°E and 150°W, suggesting the 40-day ISV mode over the EPAC might be sustained without the forcing by the eastward propagating MJO. Further investigation is warranted towards improved understanding of the origin of the ISV over the EPAC

58 GEOSCIENCES↗
DOE OSTI2025

Learning Physically Interpretable Atmospheric Models From Data With WSINDy

The multiscale and turbulent nature of Earth's atmosphere has historically rendered accurate weather modeling a hard problem. Recently, there has been an explosion of interest surrounding data-driven approaches to weather modeling, which in many cases show improved forecasting accuracy and computational efficiency when compared to traditional methods. However, many of the current data-driven approaches employ highly parameterized neural networks, often resulting in uninterpretable models and limited gains in scientific understanding. In this work, we address the interpretability problem by explicitly discovering partial differential equations governing atmospheric phenomena, identifying symbolic mathematical models with direct physical interpretations. The purpose of this paper is to demonstrate that, in particular, the weak-form sparse identification of nonlinear dynamics (WSINDy) algorithm can learn effective atmospheric models from both simulated and assimilated data. Our approach adapts the standard WSINDy algorithm to work with high-dimensional fluid data of arbitrary spatial dimension.

58 GEOSCIENCES↗
DOE OSTI2016

Sensitivity of biogenic volatile organic compounds to land surface parameterizations and vegetation distributions in California

Current climate models still have large uncertainties in estimating biogenic trace gases, which can significantly affect atmospheric chemistry and secondary aerosol formation that ultimately influences air quality and aerosol radiative forcing. These uncertainties result from many factors, including uncertainties in land surface processes and specification of vegetation types, both of which can affect the simulated near-surface fluxes of biogenic volatile organic compounds (BVOCs). In this study, the latest version of Model of Emissions of Gases and Aerosols from Nature (MEGAN v2.1) is coupled within the land surface scheme CLM4 (Community Land Model version 4.0) in the Weather Research and Forecasting model with chemistry (WRF-Chem). In this implementation, MEGAN v2.1 shares a consistent vegetation map with CLM4 for estimating BVOC emissions. This is unlike MEGAN v2.0 in the public version of WRF-Chem that uses a stand-alone vegetation map that differs from what is used by land surface schemes. This improved modeling framework is used to investigate the impact of two land surface schemes, CLM4 and Noah, on BVOCs and examine the sensitivity of BVOCs to vegetation distributions in California. The measurements collected during the Carbonaceous Aerosol and Radiative Effects Study (CARES) and the California Nexus of Air Quality and Climate Experiment (CalNex) conducted in June of 2010 provided an opportunity to evaluate the simulated BVOCs. Sensitivity experiments show that land surface schemes do influence the simulated BVOCs, but the impact is much smaller than that of vegetation distributions. This study indicates that more effort is needed to obtain the most appropriate and accurate land cover data sets for climate and air quality models in terms of simulating BVOCs, oxidant chemistry and, consequently, secondary organic aerosol formation.

Zhao, Chun↗
DOE OSTI2025

Coupled Lake‐Atmosphere‐Land Physics Uncertainties in a Great Lakes Regional Climate Model

Abstract This study develops a surrogate‐based method to assess the uncertainty within a convective permitting integrated modeling system of the Great Lakes region, arising from interacting physics parameterizations across the lake, atmosphere, and land surface. Perturbed physics ensembles of the model during the 2018 summer are used to train a neural network surrogate model to predict lake surface temperature (LST) and near‐surface air temperature (T2m). Average physics uncertainties are determined to be 1.5C for LST and T2m over land, and 1.9C for T2m over lake, but these have significant spatiotemporal variations. We find that atmospheric physics parameterizations alone are the dominant sources of uncertainty (45%–53%), while lake and land parameterizations account for 33% and 38% of the uncertainty of LST and T2m over land respectively. Interactions of atmosphere physics parameterizations with those of the land and lake contribute to an additional 13%–17% of the total variance. LST and T2m over the lake are more uncertain in the deeper northern lakes, particularly during the rapid warming phase that occurs in late spring/early summer. The LST uncertainty increases with sensitivity to the lake model's surface wind stress scheme. T2m over land is more uncertain over forested areas in the north, where it is most sensitive to the land surface model, than the more agricultural land in the south, where it is most sensitive to the atmospheric planetary boundary and surface layer scheme. Uncertainty also increases in the southwest during multiday temperature declines with higher sensitivity to the land surface model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Improved Representations of Land‐Atmosphere Interactions Over the Continental U.S. Through Dynamic Root Modeling

Previous studies have identified the oversimplified root system representation as a key factor leading to inaccuracies in vegetation‐atmosphere feedbacks. In this study, a dynamic root water uptake scheme in the Noah‐MP land surface model has been coupled to the Weather Research and Forecasting (WRF) model to investigate its impact on the surface hydroclimate variables and land‐atmosphere interactions. To evaluate the impact of the dynamic root, two coupled simulations were conducted, one with the dynamic root water uptake scheme (DynRt) and one with the static root water uptake scheme (StcRt), which is based on the default root representation in Noah‐MP, with slight modifications, primarily in vegetation‐related parameters. Both DynRt and StcRt simulations were conducted with a small ensemble of three members to account for variations in physical parameterizations, initial and boundary forcing and model setup. When compared with reference data sets, the DynRt simulations show improved results than the StcRt simulations, reducing biases in the simulated leaf area index, surface energy fluxes, soil moisture and precipitation. Two different mechanisms through which roots affect land‐atmosphere coupling have been identified. Over the transitional climate zone between the dry and wet climate, the dynamic root scheme affects surface climate and land‐atmosphere coupling mainly through changes in soil moisture through hydraulic redistribution by plant root system. Over the energy‐limited mesic zone, the dynamic root affects regional land‐atmosphere coupling mainly through changes in carbon allocation. This work highlights the importance of dynamic root representation in improving vegetation‐atmosphere simulations by enhancing predictions of water, energy, and carbon fluxes.

54 ENVIRONMENTAL SCIENCES↗