Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “linear optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Demonstration of Imaging Flow Diagnostics Using Rayleigh Scattering in Langley 0.3-Meter Transonic Cryogenic Tunnel

The feasibility of using the Rayleigh scattering technique for molecular density imaging of the free-stream flow field in the Langley 0.3-Meter Transonic Cryogenic Tunnel has been experimentally demonstrated. The Rayleigh scattering was viewed with a near-backward geometry with a frequency-doubled output from a diode-pumped CW Nd:YAG laser and an intensified charge-coupled device camera. Measurements performed in the range of free-stream densities from 3 x 10(exp 25) to 24 x 10(exp 25) molecules/cu m indicate that the observed relative Rayleigh signal levels are approximately linear with flow field density. The absolute signal levels agree (within approx. 30 percent) with the expected signal levels computed based on the well-known quantities of flow field density, Rayleigh scattering cross section for N2, solid angle of collection, transmission of the optics, and the independently calibrated camera sensitivity. These results show that the flow field in this facility is primarily molecular (i.e., not contaminated by clusters) and that Rayleigh scattering is a viable technique for quantitative nonintrusive diagnostics in this facility.

Shirinzadeh, B.↗
NASA NTRS2000

Outgassing of Flown and Unflown MIR Solar Cells

A solar panel array with more than ten years space exposure was removed from the Mir core module in November 1997, and an eight panel section was returned to Earth in January 1998. Several solar cells were removed from panel eight of the returned array and placed in a high vacuum system with a residual gas analyzer (200 amu mass spectrometer) and a cold finger. Similar unflown solar cells of the same vintage were later obtained from Energia. Several of the unflown cells were also placed in the vacuum system and outgassed residues were collected on the LN2 cold finger. Almost 3 mg of outgassed residue was collected -from a string of three unflown solar cells over a period of 94 hours under vacuum. The collected residue was weighed with a microbalance, and then the residue was analyzed by FTIR spectroscopy, and by gas chromatograph-mass spectroscopy. About 25 outgassed constituents were separated by the gas chromatograph, and a high-resolution mass spectrum was obtained of each constituent. Molecular identifications have been made for the constituents. The constituents are primarily cyclic siloxanes, and several of the constituents are isomers of the same molecule. Most of the outgassed constituents have a molecular mass of about 500 amu. Almost one mg of residue was extracted from one sq cm of coverglass/adhesive from a flown solar cell by soaking in isopropyl alcohol for 30 minutes. The gas chromatograph separated about 20 constituents. The constituents are mostly cyclic siloxanes with linear branches, hydrocarbons, and phthalates. The typical molecular mass is about 600 amu. These identifications of specific outgassing molecules have resulted in a more complete understanding of the SiO(x) contamination on the Mir solar cell coverglasses, and on the MEEP experiment trays and optical specimens during the Shuttle-Mir Phase One flight experiment program. Adjusted outgassing rates based on the data reported here, and/or measured outgassing rates and specific molecular identifications of ISS hardware samples are needed to input into model predictions of induced environment effects of the ISS.

Harvey, Gale A.↗
NASA NTRS2012

Pulsed Lidar Measurements of Atmospheric CO2 Column Absorption in the ASCENDS 2011 Airborne Campaign

We have previously demonstrated an efficient pulsed, wavelength-resolved IPDA lidar technique for measuring the tropospheric CO2 concentrations as a candidate for NASA's ASCENDS mission. Our team participated in the 2010 ASCENDS airborne campaigns we flew airborne version of the CO2 and O2 lidar on the NASA DC-8. The CO2 lidar measures the atmospheric backscatter profiles and shape of the 1572.33 nm absorption line using 250 mW average laser power, 30 wavelength samples per scan and 300 scans per second. Most flights had 5-6 altitude steps to greater than 12 km, and clear CO2 line shapes were observed at all altitudes. Our post-flight analysis estimated the Iidar range and pulse energies at each wavelength every second. We then solved for the best-fit CO2 absorption line shape, and calculated the Differential Optical Depth (DOD) at the line peak. We compared these to CO2 DODs calculated from spectroscopy based on HITRAN 2008 and the conditions from airborne in-situ readings. Analysis of the 2010 measurements over the Pacific Ocean and Lamont OK shows the expected -linear change of the peak DOD with altitude. For measurements at altitudes greater than 6 km the random errors were approximately 0.3 ppm for 80 sec averaging times. After the 2010 flights we improved the airborne lidar's scan uniformity, calibration and receiver sensitivity. Our team participated in the seven ASCENDS science flights during late July and August 2011. These flights were made over a wide variety of surface and cloud conditions near the US, including over the central valley of California, over several mountain ranges, over both broken and solid stratus cloud deck over the Pacific Ocean, snow patches on mountain tops, over thin and broken clouds above the US Southwest and Iowa, and over forests near the WLEF tower in Wisconsin. Analyses show the retrievals of lidar range and CO2 column absorption, as wen as estimates of CO2 mixing ratio worked well when measuring over topography with rapidly changing height and reflectivity, through thin clouds and to stratus cloud tops. For regions where the CO2 concentration was relatively constant, the measured CO2 absorption profile (averaged for 50 sec) matched the predicted profile to better than 1% RMS error for all flight altitudes. For 1 & 10 second averaging, the scatter in the retrievals was limited by signal shot noise (i.e. the sigual photon count). Analysis to date shows the decrease in CO2 due to vegetation when flying easterward over the Great Plains as well as the increase in CO2 concentration in the vicinity ofthe coal-fired power plant in New Mexico. Examples of these and other results will be presented.

Abshire, James B.↗
NASA NTRS2019

Sensor Configuration Trade Study for Navigation in near Rectilinear Halo Orbits

Gateway is a NASA program planned to support a human space explorationand prove new technologies for deep space exploration. One of the Gatewayrequirements is to operate in the absence of communications with the Deep SpaceNetwork (DSN) for a period of at least 3 weeks. In this paper three types ofonboard sensors (a camera for optical navigation, a GPS receiver, and X-ray navigation),are considered to enhance its autonomy and reduce the reliance on DSN.A trade study is conducted to explore alternatives on how to achieve autonomy andhow to reduce DSN dependency while satisfying navigation performance requirements.Using linear covariance analysis, the performance of a navigation systemusing DSN and/or the other sensors is shown.

Gateway↗
DOE OSTI2021

Direct Measurement of Helicoid Surface States in RhSi Using Nonlinear Optics

Despite the fundamental nature of the edge state in topological physics, direct measurement of electronic and optical properties of the Fermi arcs of topological semimetals has posed a significant experimental challenge, as their response is often overwhelmed by the metallic bulk. However, laser-driven currents carried by surface and bulk states can propagate in different directions in nonsymmorphic crystals, allowing for the two components to be easily separated. Motivated by a recent theoretical prediction G. Chang et al., Phys. Rev. Lett. 124, 166404 (2020), we have measured the linear and circular photogalvanic effect currents deriving from the Fermi arcs of the nonsymmorphic, chiral Weyl semimetal RhSi over the 0.45-1.1 eV incident photon energy range. Our data are in good agreement with the predicted spectral shape of the circular photogalvanic effect as a function of photon energy, although the direction of the surface photocurrent departed from the theoretical expectation over the energy range studied. In conclusion, surface currents arising from the linear photogalvanic effect were observed as well, with the unexpected result that only two of the six allowed tensor element were required to describe the measurements, suggesting an approximate emergent mirror symmetry inconsistent with the space group of the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Modeling of thermal and kinetic processes in non-equilibrium plasma ignition applied to a lean combustion engine

In recent years novel ignition systems have been developed to enable stable and efficient engine operations with lean mixtures. Among them, radio-frequency corona ignition systems create discharges that involve a much wider region compared to traditional spark, and produce non equilibrium plasma with high levels of active radicals and excited species. These devices considerably increase the early flame growth speed and extend stable operating limits. With the aim of expanding the knowledge on high efficiency lean-burn SI engines, this paper investigates and compares the combustion development generated by spark and corona ignitions through computational fluid dynamics, within the Reynolds-Averaged Navier-Stokes framework for turbulence modeling. In order to simultaneously take thermal and chemical effects into account, the Perfectly Stirred Reactor combustion model is used. Experimental data are also collected for validation in an optical access engine, for different mixture levels, from stoichiometric to very lean. Furthermore, the faster burn rate generated by the corona system in the initial stage of the combustion is well predicted by the simulations, in all the relative air-fuel ratio conditions. Remarkably, as the mixture becomes lean, simulations are able to capture the non-linear transition from fast to slow kernel growth, before a self-sustainable flame propagation is established. This correlates very well with the measured engine cyclic variability and the corresponding steep change in the duration of the flame kernel formation. Ultimately, this study highlights the important role of the atomic oxygen, as active radical, in promoting and enhancing the combustion initiated by a corona discharge, in addition to the volumetric ignition effect. By contrast, the validated simulations allow to explain that the high-temperature thermal plasma generated in a traditional spark discharge is insensitive to kinetic aspects.

42 ENGINEERING↗
NASA NTRS1993

Non-invasive optical detection of glucose in cell culture nutrient medium

The objective of the proposed research was to begin the development of a non-invasive optical sensor for measuring glucose concentration in the output medium of cell cultures grown in a unique NASA bioreactor referred to as an integrated rotating-wall vessel (IRWV). The input, a bovine serum based nutrient media, has a known glucose concentration. The cells within the bioreactor digest a portion of the glucose. Thus, the non-invasive optical sensor is needed to monitor the decrease in glucose due to cellular consumption since the critical parameters for sustained cellular productivity are glucose and pH. Previous glucose sensing techniques have used chemical reactions to quantify the glucose concentration. Chemical reactions, however, cannot provide for continuous, real time, non-invasive measurement as is required in this application. Our effort while in the fellowship program was focused on the design, optical setup, and testing of one bench top prototype non-invasive optical sensor using a mid-infrared absorption spectroscopy technique. Glucose has a fundamental vibrational absorption peak in the mid-infrared wavelength range at 9.6 micron. Preliminary absorption data using a CO2 laser were collected at this wavelength for water based glucose solutions at different concentrations and one bovine serum based nutrient medium (GTSF) with added glucose. The results showed near linear absorption responses for the glucose-in-water data with resolutions as high at 108 mg/dl and as low as 10 mg/dl. The nutrient medium had a resolution of 291 mg/dl. The variability of the results was due mainly to thermal and polarization drifts of the laser while the decrease in sensitivity to glucose in the nutrient medium was expected due to the increase in the number of confounders present in the nutrient medium. A multispectral approach needs to be used to compensate for these confounders. The CO2 laser used for these studies was wavelength tunable (9.2 to 10.8 micrometers), however, it was to unstable across wavelengths to test the multispectral approach. From this research, further NASA support was obtained to continue the work throughout the year in which a more stable light source will be used at smaller, near-infrared, wavelengths. It is anticipated that a more compact, non-invasive, optical glucose sensor will be realized which can be used with a bioreactor on future space shuttle missions. It is also anticipated that a multispectral optical sensor may be used to determine the concentration of other molecules needed within the NASA bioreactor, such as fructose and galactose.

Cote, Gerald L.↗
NASA NTRS2009

A New Spectroscopic and Interferometric Study of the Young Stellar Object V645 Cyg

Aims. We present the results of high-resolution optical spectroscopy, low-resolution near-IR spectroscopy and near-infrared speckle interferometry of the massive young stellar object candidate V645 Cyg that were taken in order to refine its fundamental parameters and properties of its circumstellar envelope. Methods. Speckle interferometry in the H- and K-bands and an optical spectrum in the range 5200-6680 A with a spectral resolving power of R = 60000 were obtained at the 6 m telescope of the Russian Academy of Sciences. Another optical spectrum in the range 4300-10500 A with R = 79000 was obtained at the 3.6m CFHT. A low-resolution spectrum in the ranges 0.46-1.4 and 1.4-2.5 microns with a R approx. 800 and approx. 700, respectively, were obtained at the 3m Shain telescope of the Lick Observatory. Results. Using a new kinematic method based on non-linear modeling of the neutral hydrogen density profile in the direction toward the object, we suggest a new a distance D = 4.2+/-0.2 kpc. We also suggest a new estimate for the star's effective temperature, T(sub eff) approx. 25000 K. We have resolved the object in both H- and K-bands. Using a two-component ring fit, we derived a compact component size of 18 mas and 15 mas in the H- and K-band, respectively, which correspond to 37 and 33 AU at the new distance. Analysis of our and previously published data shows a approx. 2 mag drop of the near-infrared brightness of V645 Cyg in the beginning of the 1980 s. At the same time, the cometary nebular condensation N1 seems to fade in this wavelength range with respect to the N0 object, which represent the star with a nearly pole-on optically-thick disk and an optically-thin envelope. Conclusions. We conclude that V645 Cyg is a young massive main-sequence star, which recently emerged from its cocoon. and already passed the protostellar accretion stage. The presence of accretion is not necessary to account for the high observed luminosity of (2.6) x 10(exp 4) Solar Mass/yr. The receding part of a strong, mostly uniform outflow with a terminal velocity of approx.800 km/s is only blocked from view far from the star, where forbidden lines form. The near-infrared size of the source is consistent with the dust sublimation distance near this hot and luminous star and is the largest among young stellar objects observed interferometrically to-date.

Miroshinichenko, A. S.↗
DOE OSTI2023

Machine Learning-Enabled Quantitative Analysis of Optically Obscure Scratches on Nickel-Plated Additively Manufactured (AM) Samples

Additively manufactured metal components often have rough and uneven surfaces, necessitating post-processing and surface polishing. Hardness is a critical characteristic that affects overall component properties, including wear. This study employed K-means unsupervised machine learning to explore the relationship between the relative surface hardness and scratch width of electroless nickel plating on additively manufactured composite components. The Taguchi design of experiment (TDOE) L9 orthogonal array facilitated experimentation with various factors and levels. Initially, a digital light microscope was used for 3D surface mapping and scratch width quantification. However, the microscope struggled with the reflections from the shiny Ni-plating and scatter from small scratches. To overcome this, a scanning electron microscope (SEM) generated grayscale images and 3D height maps of the scratched Ni-plating, thus enabling the precise characterization of scratch widths. Optical identification of the scratch regions and quantification were accomplished using Python code with a K-means machine-learning clustering algorithm. The TDOE yielded distinct Ni-plating hardness levels for the nine samples, while an increased scratch force showed a non-linear impact on scratch widths. The enhanced surface quality resulting from Ni coatings will have significant implications in various industrial applications, and it will play a pivotal role in future metal and alloy surface engineering.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Satellite tracking by combined optimal estimation and control techniques.

Combined optimal estimation and control techniques are applied for the first time to satellite tracking systems. Both radio antenna and optical tracking systems of NASA are considered. The optimal estimation is accomplished using an extended Kalman filter resulting in an estimated state of the satellite and of the tracking system. This estimated state constitutes an input to the optimal controller. The optimal controller treats a linearized system with a quadratic performance index. The maximum principle is applied and a steady-state approximation to the resulting Riccati equation is obtained. A computer program, RATS, implementing this algorithm is described. A feasibility study of real-time implementation, tracking simulations, and parameter sensitivity studies are also reported.

Dressler, R. M.↗
NASA NTRS1972

Thin-film light-intensity measurement strain-analysis technique.

The optical response to loading of a thin metallic film deposited on a low-modulus structural substrate is studied theoretically and experimentally. Two types of optical properties called total and central-image transmittance (or reflectance) are shown to be related to the mechanical state of the substrate. Empirical optical-mechanical relationships are proposed between these optical properties and the substrate strain field of a general plane-stress problem. A technique based on wrinkle and microfracture patterns is described for determining principal directions of strain. Experimental results for uniaxially loaded specimens show that it is possible to obtain a nearly linear relationship between transmittance and strain for certain materials combinations.

Williams, J. G.↗
NASA NTRS1970

Discrete control of linear distributed systems with application to the deformable primary mirror of a large orbiting telescope

The results are presented of a detailed study of the discrete control of linear distributed systems with specific application to the design of a practical controller for a plant representative of a telescope primary mirror for an orbiting astronomical observatory. The problem of controlling the distributed plant is treated by employing modal techniques to represent variations in the optical figure. Distortion of the mirror surface, which arises primarily from thermal gradients, is countered by actuators working against a backing structure to apply a corrective force distribution to the controlled surface. Each displacement actuator is in series with a spring attached to the mirror by means of a pad intentionally introduced to restrict the excitation of high-order modes. Control is exerted over a finite number of the most significant modes.

Creedon, J. F.↗
NASA NTRS1976

Theory of thin screen scintillations for a spherical wave

A thin screen scintillation theory for a spherical wave is presented under the 'quasi-optical' approximation. We calculate the 'scattering angle', the 'observed angle', the intensity correlation function and the temporal pulse broadening for the random wave. It is found that as the wave propagates outward away from the phase screen, the correlation scale of the intensity fluctuation increases linearly while the 'observed angle' decreases linearly. The calculations are carried out for both Gaussian and power-law spectra of the turbulent medium.

Lee, L. C.↗
NASA NTRS1977

Optimal singular control with applications to trajectory optimization

A comprehensive discussion of the problem of singular control is presented. Singular control enters an optimal trajectory when the so called switching function vanishes identically over a finite time interval. Using the concept of domain of maneuverability, the problem of optical switching is analyzed. Criteria for the optimal direction of switching are presented. The switching, or junction, between nonsingular and singular subarcs is examined in detail. Several theorems concerning the necessary, and also sufficient conditions for smooth junction are presented. The concepts of quasi-linear control and linearized control are introduced. They are designed for the purpose of obtaining approximate solution for the difficult Euler-Lagrange type of optimal control in the case where the control is nonlinear.

Vinh, N. X.↗
NASA NTRS1977

Theory of thin-screen scintillations for a spherical wave

A thin-screen scintillation theory for a spherical wave is presented under the 'quasi-optical' approximation. The 'scattering angle', the 'observed angle', the intensity correlation function, and the temporal pulse broadening are calculated for the random wave. It is found that as the wave propagates outward away from the phase screen, the correlation scale of the intensity fluctuation increases linearly while the 'observed angle' decreases linearly. The calculations are carried out for both Gaussian and power-law spectra of the turbulent medium. The results are applied to an analysis of the scattering data for the Crab Nebula's radiation.

Lee, L. C.↗
NASA NTRS1982

Report of subpanel on image sharpness

Factors effecting the sharpness of images acquired by multispectral scanners, synthetic aperture radar, thermal infrared sensors, and multispectral linear arrays are defined. Factors associated with the sensor include the atmospheric blur/scatter function, the point spread function of the sensor, the sensor aperture, the filter characteristics, and the sampling rate and quatization effects. Several research tasks are proposed which include investigating the use of optical prefilters which include investigating the use of optical prefilters and the relationships of the instantaneous field of view (aperture width) on the performance of geocorrelation systems.

Source record↗
NASA NTRS1992

Optimal grazing incidence optics and its application to wide-field X-ray imaging

A class of high-resolution, efficient, and wide-field grazing incidence optics is discussed. Optical designs for searching efficiently for distant X-ray clusters are developed. It is shown that a rather general procedure exists for the design of an optical mission if well-defined scientific goals can be provided. Clusters of galaxies with an angular diameter of about 5 arcsec over a field of about 1 deg are resolved so that a comprehensive deep search is possible with a payload of 1/10 the linear dimensions of AXAF. By dropping the requirement for perfect on-axis imagery, searching within a suitably general class of telescope design, and optimizing a quantity directly related to the scientific requirement, it is shown that satisfactory designs do exist. The resulting telescope is shown to be no more difficult to fabricate than existing mirrors, and it can be nested.

Burrows, Christopher J.↗
NASA NTRS1994

(abstract) Observation by Clementine of a Hugh Opposition Surge on the Moon at Very Small Solar Phase Angles

The Clementine mission enabled the first quantative observations of the Moon at very small solar phase angles. It is well established from Earth-based observations that the Moon exhibits a non-linear increase in brightness as its face becomes fully illuminated to a terrestrial observer. Because the models of the opposition effect are sensitive indicators of surfical compaction state and particle size, observations at small solar phase angles are important to obtain. A recent model for optical coherent backscatter seeks to explain a narrow opposition spike at very small phase angles (< 1 degree) seen on several icy satellites , including Europa, Icarus 90, and Oberon . Over 90 images of the Moon's surface at phase angles less than 0.5(deg) (the minimum phase angle observable from Earth due to the Moon's angular size) were obtained by the Clementine spacecraft. Our analysis of these images shows the moon exhibits a surge in brightness of approximately 20% below 0.25(deg), comparable to the values observed on icy satellites. No color dependence was detected in the lunar phase curve below 2 degrees.

partical size icy satellites Europa Icarus 90 Ober↗