Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “limiting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries

We present that increasing electrode thickness, thus increasing the volume ratio of active materials, is one effective method to enable the development of high energy density Li-ion batteries. In this study, an energy density versus power density optimization of LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA)/graphite cell stack was conducted via mathematical modeling. The energy density was found to have a maximum point versus electrode thickness (critical thickness) at given discharging C rates. The physics-based factors that limit the energy/power density of thick electrodes were found to be increased cell polarization and underutilization of active materials. The latter is affected by Li-ion diffusion in active materials and Li-ion depletion in the electrolyte phase. Based on those findings, possible approaches were derived to surmount the limiting factors. Finally, the improvement of the energy–power relationship in an 18,650 cell was used to demonstrate how to optimize the thick electrode parameters in cell engineering.

25 ENERGY STORAGE↗

Manufacture and Tests of a Bi2223/YBCO Coil for a 1-MJ/0.5-MVA Fault Current Limiter-Magnetic Energy Storage System

With the increasing of wind energy, it is necessary to develop an energy storage system to level the wave of wind power, and to develop a fault current limiter for improvement of the LVRT capability of the wind farm. An innovative idea to deal with the above problem is to develop a superconducting fault current limiter-magnetic energy storage system (SFCL-MES). In this paper, we report the progress of the superconducting coil for a 1-MJ/0.5-MVA FCL-SMES system. The coil consisted of 46 double pancakes, in which 8 pancakes were made of YBCO tapes and the others were made of Bi2223 tapes; the inductance of the coil was 13.3 H, and its rated current was 388 A while the maximum magnetic field was 3.5 T. This coil had been used for a FCL-SMES system, which was installed and tested at a wind farm connected to the live power grid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Limit Shapes for Gibbs Ensembles of Partitions

We explicitly compute limit shapes for several grand canonical Gibbs ensembles of partitions of integers. These ensembles appear in models of aggregation and are also related to invariant measures of zero range and coagulation-fragmentation processes. We show, that all possible limit shapes for these ensembles fall into several distinct classes determined by the asymptotics of the internal energies of aggregates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Workability Limits of Magnesium Alloy AZ31B Subjected to Equal Channel Angular Pressing

Equal channel angular pressing (ECAP) is an important severe plastic deformation process to produce ultrafine grained microstructures in metals and alloys. Magnesium and its alloys generally possess poor workability at temperatures below 250 °C. This investigation examines the influence of different passes and processing routes of ECAP on improving the workability of Mg alloy AZ31B. ECAP was carried out for three passes using a die of angle 120° using processing routes Bc and C. The operating temperature was 523 K for the first pass and 423 K for the subsequent two passes. The resultant microstructure and mechanical properties were determined. Workability of the alloy at 423 K (150 °C) was determined using upsetting experiments on cylindrical specimens machined from the annealed and ECAPed samples. Workability limit diagrams have been constructed for the various processed conditions. The workability data generated were also analyzed using five different workability criteria (also referred to as ductile fracture models) and the material constants for these five models were evaluated. Specimens processed by two passes through route C (pass 2C) exhibits better workability compared to other passes since the workability limit line after this pass shows maximum safe working area and lies above the other workability lines. Among the five different workability criteria investigated, the Freudenthal workability criterion is more suitable for prediction of failure in this alloy.

36 MATERIALS SCIENCE↗

Dislocation-Limited Thermal Conductivity in LiF: Revisiting Perturbative Models

We revisit models to describe phonon-dislocation interactions and resulting dislocation-limited thermal conductivity (k), particularly as applied to describe the temperature-dependent k behavior of LiF with significant dislocation densities. Coupling semiempirical models of phonon scattering from dislocation strain fields provided by Klemens and Carruthers with density functional theory description of the phonons and input parameters, we find that both models significantly overpredict the measured k of LiF, as found previously. However, more direct application of the quantum perturbation theory description, from which the models were derived, gives significantly stronger phonon-dislocation scattering and strongly underpredicts the measured k data. We revisit the derivation of phonon-dislocation-strain field scattering and provide numerical details regarding its implementation. This work demonstrates that quantum perturbative calculations, now accessible to modern computational architectures, may provide a reasonable description of dislocation-limited k in materials as governed by phonon-strain field interactions provided that questions regarding the relevant strain field range can be resolved.

36 MATERIALS SCIENCE↗

Resolving the Discrepancies Between Empirical and Rayleigh Charge Limiting Models for Globular Proteins

Starting with the Rayleigh charge limiting model, a slightly different approach is used to account for the well-known discrepancy that exists between the said model and experimental ESI MS data for globular proteins. It is shown using published datasets that for globular proteins, the mass density ρ exhibits a weak second-order dependence on its mass M, according to ρ(M)∝M{sup -α}, α ~ 0.14. A direct equivalence established between ESI MS and x-ray techniques suggests a minimum but critical surface tension of 15.6 ± 5.2 mN/m for the droplet at the liquid-to-gas phase transition point. The packing density factor η for globular proteins is believed to lie between 1 (very tightly packed) and 4.6 (less tight, natively packed). While the Rayleigh charge limiting model has been linked historically to the CRM (J. Chem. Phys. 49:2240–2249, 1968; Anal. Chim. Acta 406:93–104, 2000), this paper does not expressly seek to justify the CRM, but rather uses empirical data and existing knowledge across subfields to help build a consistent picture of ESI MS phenomena that might be difficult to explain otherwise. These results would be useful in molecular dynamics (MD) simulations, understanding liquid-to-gas phase transitions and in opening up new routes for cross-calibration between ESI MS, IM MS, NMR and x-ray crystallography studies. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Increasing the Upper Mass/Charge Limit of a Quadrupole Ion Trap for Ion/Ion Reaction Product Analysis via Waveform Switching

Quadrupole ion traps (QITs) are versatile platforms for performing experiments with gas-phase ions due to their abilities to store ions of both polarities and to conduct MS{sup n} experiments. The QIT is particularly useful as a reaction cell for ion/ion reactions. In the case of an ion/ion reaction experiment in a QIT, multiply charged reactant ions may initially be of relatively low m/z (e.g., m/z < 1000) whereas the product ions can be one or more orders of magnitude higher in m/z (e.g., m/z > 100,000). Several factors can limit the m/z range over which an ion/ion reaction experiment can be conducted. These include (1) the efficiency of the detector, (2) the m/z range over which oppositely charged ions can be mutually stored, and (3) the m/z range over which ions can be mass selectively ejected into an external detector. High-frequency waveforms provide larger m/z trapping ranges for mutual storage of oppositely charged ions whereas low-frequency waveforms provide better trapping for very high m/z product ions. Presented here is a method that switches from a high-frequency sine wave prior to and during an ion/ion reaction to a low-frequency square wave to eject low m/z reagent ions and improves confinement of the product ions before mass-selective ejection by scanning the frequency of the square wave. This approach addresses the third issue, which is the primary limiting factor with QITs operated at high RF (e.g., > 900 MHz). .

74 ATOMIC AND MOLECULAR PHYSICS↗

Recalibrating Best Practices, Challenges, and Limitations of Estimating Tree Transpiration Via Sap Flow

Purpose: Transpiration dominates hydrologic fluxes from terrestrial ecosystems to the atmosphere. Sap flow is the most widely used method to quantify transpiration, and calibrations can improve the accuracy of these estimates. Despite numerous suggestions to perform and apply sap flow calibrations, seemingly few reports apply these recommendations. Here, we sought to determine the prevalence of calibration across sap flow methodology. Recent Findings: In this work, we reviewed tree sap flow literature over the past nine years and determined that only 5.3% of these publications documented the performance of calibrations, the application of coefficients from previous calibrations, or the application of correction factors using calibration data to ensure or improve accuracy of transpiration estimates. These data indicate that calibration has not been adopted as a best practice. However, these data may also reflect challenges to the performance and application of calibration indicating fundamental limitations of sap flow methods. Summary: We highlight the need for testing critical assumptions regarding calibration; specifically, that coefficients derived from calibrations on small stems are suitable for application to large stems and that different calibration approaches yield similar transpiration estimates. We encourage researchers to adopt calibration as a best practice for sap flow data and to explain how calibration was performed, how calibration data were applied, and to acknowledge and justify circumstances that preclude or do not necessitate calibration. Without the adoption of calibration and an improved understanding of its limitations, our understanding of transpiration and ability to quantify it using this technology will remain inadequate.

54 ENVIRONMENTAL SCIENCES↗

Grain boundary segregation beyond the dilute limit: Separating the two contributions of site spectrality and solute interactions

Solute segregation at grain boundaries (GBs) is known to have a profound impact on material properties, and as such is becoming routinely used as an element in alloy design. Beyond the dilute limit, the extent of solute GB segregation is known to be concentration dependent. Using hybrid Monte Carlo/Molecular Statics simulations of Mg segregation in Al, in this work we decouple the two contributions to this composition dependence: (i) spectrality of atomic environments at the boundary and (ii) solute-solute interactions. Although only contribution (ii) is typically considered in the literature, we argue that both contributions are equally important to understand concentration dependence and correctly quantify GB solute segregation in a binary alloy. Finally, a thermodynamic segregation isotherm is outlined that accounts for both the spectrality of grain boundary sites and solute-solute interactions. Unlike classical isotherms like those of McLean or Fowler-Guggenheim, which can be successfully fitted to GB segregation data only over a limited range of composition and temperature, our proposed model is shown to be accurate across the composition-temperature space.

36 MATERIALS SCIENCE↗

Limitations to winter and spring photosynthesis of a Rocky Mountain subalpine forest

Temperate and boreal conifer forests are dormant for many months during the cold season. Climate change is altering the winter environment, with increased temperature, altered precipitation, and earlier snowmelt in many locations. If significant enough, these changes may alter patterns of dormancy and activity of evergreens. Here we studied the factors limiting photosynthetic activity of a high-elevation subalpine forest that has undergone substantial warming in recent decades. We tested the hypothesis that this warming has been significant enough to allow photosynthesis during sunny warm days in winter. Using thermal imagery, we found that foliage in winter was sometimes near the temperature optimum for photosynthesis, but no net carbon gain occurred for most of the cold season. Water transport was limited by blockage of sap transport by frozen boles, but not by frozen soils. Foliar carotenoid content was much higher during winter, driven largely by increases in the pool size of the photoprotective xanthophyll cycle. There was no seasonal change in chlorophyll or lutein content. Net carbon uptake began only as boles thawed, with no difference in timing among tree species, and the spring increase in canopy-level photosynthetic capacity occurred before sap transport was detected. The seasonality of gross primary productivity (GPP) was strongly linked to seasonality of xanthophyll cycle deepoxidation state in all species. Seasonality of GPP was detectable with two metrics of canopy color – the Green Chromatic Coordinate and Green-Red Vegetation Index (a proxy for the newly proposed MODIS-based chlorophyll/carotenoid index or CCI). Both indices were significantly correlated with GPP. Together these results indicate the potential for airborne or near-surface remote sensing of leaf color to serve as a metric of photosynthetic activity in evergreen forests, and to monitor physiological changes associated with the progression in and out of winter dormancy.

54 ENVIRONMENTAL SCIENCES↗

Scaling properties of the pairing problem in the strong coupling limit

We study the excited states of the pairing Hamiltonian providing an expansion for their energy in the strong coupling limit. To assess the role of the pairing interaction we apply the formalism to the case of a heavy atomic nucleus. We show that only a few statistical moments of the level distribution are sufficient to yield an accurate estimate of the energy for not too small values of the coupling G and we give the analytic expressions of the first four terms of the series. Further, we discuss the convergence radius G{sub sing} of the expansion showing that it strongly depends upon the details of the level distribution. Furthermore G{sub sing} is not related to the critical values of the coupling G{sub crit}, which characterize the physics of the pairing Hamiltonian, since it can exist even in the absence of these critical points. -- Highlights: •We study the excitation spectrum of the pairing Hamiltonian. •We provide an analytic expansion around the strong coupling limit. •We discuss the convergence radius of the expansion. •We connect the radius with the critical points of H.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Extremely correlated Fermi liquids in the limit of infinite dimensions

We study the infinite spatial dimensionality limit (d→∞) of the recently developed Extremely Correlated Fermi Liquid (ECFL) theory (Shastry 2011, 2013) [17,18] for the t–J model at J=0. We directly analyze the Schwinger equations of motion for the Gutzwiller projected (i.e. U=∞) electron Green’s function G. From simplifications arising in this limit d→∞, we are able to make several exact statements about the theory. The ECFL Green’s function is shown to have a momentum independent Dyson (Mori) self energy. For practical calculations we introduce a partial projection parameter λ, and obtain the complete set of ECFL integral equations to O(λ{sup 2}). In a related publication (Zitko et al. 2013) [23], these equations are compared in detail with the dynamical mean field theory for the large U Hubbard model. Paralleling the well known mapping for the Hubbard model, we find that the infinite dimensional t–J model (with J=0) can be mapped to the infinite-U Anderson impurity model with a self-consistently determined set of parameters. This mapping extends individually to the auxiliary Green’s function g and the caparison factor μ. Additionally, the optical conductivity is shown to be obtainable from G with negligibly small vertex corrections. These results are shown to hold to each order in λ. -- Highlights: •Infinite-dimensional t–J model (J=0) studied within new ECFL theory. •Mapping to the infinite U Anderson model with self consistent hybridization. •Single particle Green’s function determined by two local self energies. •Partial projection through control variable λ. •Expansion carried out to O(λ{sup 2}) explicitly.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exact solutions and symmetry analysis for the limiting probability distribution of quantum walks

In the literature, there are numerous studies of one-dimensional discrete-time quantum walks (DTQWs) using a moving shift operator. However, there is no exact solution for the limiting probability distributions of DTQWs on cycles using a general coin or swapping shift operator. In this paper, we derive exact solutions for the limiting probability distribution of quantum walks using a general coin and swapping shift operator on cycles for the first time. Based on the exact solutions, we show how to generate symmetric quantum walks and determine the condition under which a symmetric quantum walk appears. Our results suggest that choosing various coin and initial state parameters can achieve a symmetric quantum walk. By defining a quantity to measure the variation of symmetry, deviation and mixing time of symmetric quantum walks are also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Limit on graviton mass using stacked galaxy cluster catalogs from SPT-SZ, Planck-SZ and SDSS-redMaPPer

In the last few years, there has been a resurgence of interest in obtaining observational bounds on the graviton mass, following the detection of gravitational waves, because of the versatility of massive graviton theories in resolving multiple problems in cosmology and fundamental physics. In this work, we apply the method proposed in Rana et al., (2018), which consists of looking for Yukawa-like fall off in the gravitational potential, to stacked galaxy cluster catalogs from three disparate surveys. These include catalogs from 2500 sq. degree SPT-SZ survey, the Planck all-sky SZ catalog, and a redMaPPer selected catalog from 10,000 sq. degree of SDSS-DR8 data. The 90% c.l. limits which we obtained on the graviton mass using SPT, Planck and SDSS are: m{sub g}<4.73×10{sup −30} eV, 3.0×10{sup −30} eV, and 1.27×10{sup −30} eV respectively; or in terms of Compton wavelength are λ{sub g}>2.62×10{sup 20} km, 4.12×10{sup 20} km, 9.76×10{sup 20} km. These limits are about five times more stringent than the previous best bound from galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Zero point fluctuations for magnetic spirals and Skyrmions, and the fate of the Casimir energy in the continuum limit

We study the role of zero-point quantum fluctuations in a range of magnetic states which on the classical level are close to spin-aligned ferromagnets. These include Skyrmion textures characterized by non-zero topological charge, and topologically-trivial spirals arising from the competition of the Heisenberg and Dzyaloshin-skii–Moriya interactions. For the former, we extend our previous results on quantum exactness of classical Bogomolny–Prasad–Sommerfield (BPS) ground-state degeneracies to the general case of Kähler manifolds, with a specific example of Grassmann manifolds Gr(M,N). These are relevant to quantum Hall ferromagnets with N internal states and integer filling factor M. A promising candidate for their experimental implementation is monolayer graphene with N = 4 corresponding to spin and valley degrees of freedom at the charge neutrality point with M = 2 filled Landau levels. We find that the vanishing of the zero-point fluctuations in taking the continuum limit occurs differently in the case of BPS states compared to the case of more general smooth textures, with the latter exhibiting more pronounced lattice effects. This motivates us to consider the vanishing of zero-point fluctuations in such near-ferromagnets more generally. We present a family of lattice spin models for which the vanishing of zero-point fluctuations is evident, and show that some spirals can be thought of as having nonzero but weak zero-point fluctuations on account of their closeness to this family. Between them, these instances provide concrete illustrations of how the Casimir energy, dependent on the full UV-structure of the theory, evolves as the continuum limit is taken.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dual-module humidity pump for efficient air dehumidification: Demonstration and performance limitations

Condensation dehumidification in conventional air conditioning technologies is energy-intensive, accounting for up to 50% of building cooling energy used in some climates. Selective vacuum membrane dehumidification (VMD) is one of the leading alternative dehumidification technologies due to its potential for significant energy savings, and the “dual-module humidity pump” is one of the most promising VMD concepts. Here, this work is the first to provide experimental proof-of-concept for the dual-module humidity pump system and provides the first thermodynamic modeling framework that accounts for realistic steady-state operating limitations, both of which are lacking in the current literature. Additionally, this work is the first to provide a system design solution that overcomes practical challenges associated with air accumulation in the vacuum channels. The experimental results in this work show that the current prototype can remove up to 45% of the water vapor in the air stream, and the vapor pressure difference in the vapor rejection module needs to be approximately 2–4 times greater than that of the dehumidification module in order to maintain balanced mass transfer. The thermodynamic model applied to typical air conditioning conditions shows that the ideal dehumidification (latent) COPs can reach up to 40, but practical COPs are limited to approximately 10. Furthermore, the model shows that the overall energy efficiency increases as the membrane air selectivity increases, though this improvement gradually starts to diminish when the membrane selectivity is increased above 10,000.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Overcoming geometric limitations in metallic glasses through stretch blow molding

Bulk metallic glasses (BMGs) exhibit remarkable mechanical properties, such as high strength and elasticity, which is often paired with fracture toughness. Their supercooled liquid region gives rise to plastic-like processing and suggests parts and shapes that can otherwise not be obtained for crystalline metals. However, current processing techniques only allow for limited options in terms of geometry, thicknesses uniformity, and shape complexity. Here we introduce a new processing technique, “stretch blow molding,” to expand the range of possible parts and increase the available geometries that can be fabricated with BMGs. Additionally, a model is derived that allows for the quantification and prediction of stretch blow molding and provides insight into its potential use and limitations. We demonstrate that with stretch blow molding overall strains exceeding 2000% are achievable, compared to the previously reported ~150% of blow molding. With the ability to stretch blow mold shapes that were previously unachievable with any other metal fabrication technique in a fast and economical manner, and the superb properties of BMGs, we look forward to a broad commercial adaptation of this technique.

36 MATERIALS SCIENCE↗

Upper limit on the cosmic-ray photon fraction at EeV energies from the Pierre Auger Observatory

From direct observations of the longitudinal development of ultra-high energy air showers performed with the Pierre Auger Observatory, upper limits of 3.8%, 2.4%, 3.5% and 11.7% (at 95% c.l.) are obtained on the fraction of cosmic-ray photons above 2, 3, 5 and 10 EeV (1 EeV = 10^18 eV) respectively. These are the first experimental limits on ultra-high energy photons at energies below 10 EeV. The results confirm previous constraints on top-down models, and they reduce systematic uncertainties in the interpretation of shower data in terms of primary flux, nuclear composition and proton-air cross-section.

79 ASTRONOMY AND ASTROPHYSICS↗