Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “grade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Desiccants enabling energy-efficient buildings: A review

Buildings account for about 39% of the total energy consumption in the United States. Developing highly energy-efficient and environmentally friendly systems that are either actively or passively integrated into buildings plays a crucial role in decarbonizing the building sector. Among various technologies, desiccant-based energy systems have received particular attention in recent years due to their unique advantages, such as being thermally driven using low-grade waste or solar energies and being reliable over a wide range of operating ranges. Extensive research efforts have been exerted on desiccant-enabled technologies at both material and system levels aiming to increase their performance and achieve high technological readiness levels. The present review paper comprehensively discusses research works made at the system level. It overviews desiccant-based air conditioning systems, desiccant-based humidity pumps, desiccant-based thermal energy storage systems, and desiccant-based appliances. The study identifies challenges and opportunities to accelerate the commercialization of desiccant-enabled technologies. It is found that desiccant materials offer great promise to improve energy efficiency and functionality of future buildings through decoupling the latent and sensible cooling loads in air conditioning systems, humidity pumps integrated into building facades, and next-generation appliances. However, commercial viability and widespread acceptance of desiccant-based systems have been hampered by several major obstacles, including liquid and air flow mal-distribution and inferior thermo-physical properties of desiccant materials resulting in low ab/adsorption and regeneration rates and bulky/costly systems.

25 ENERGY STORAGE↗
DOE OSTI2023

Medium-temperature phase change material integration in domestic heat pump water heaters for improved thermal energy storage

In this review, we examine state-of-the-art developments in integrating phase change materials (PCMs) for thermal energy storage (TES) in domestic heat pump water heaters (HPWHs). The component design optimization and control optimization of HPWHs and TES are reviewed for insight into improving the thermal capacity and efficiency of a PCM-integrated HPWH. The state-of-the-art review is categorized by the stage of development of the PCM for deployment in HPWHs. To select appropriate PCMs for HPWHs, a six-factor down-selection process is used to determine the best material(s) for integration in HPWHs with appropriate heat exchanger design. Ultimately, food-grade PCMs appear to be the best candidate for integration of TES in domestic HPWHs because they are nontoxic, highly cyclable, and have heat transfer properties accommodable to water heating when integrated in a manner to overcome the thermal conductivity limitations of the material. A key parameter of water heating performance is thermal heating power of the PCM component, which is not often reported. Many studies report significant improvement in capacity and efficiency. Furthermore, many performance metrics are identified from the literature to quantify the system performance, but agreement across studies is not found. Unified energy factor and first hour rating performance tests are required for commercially available HPWHs, and these performance metrics could homogenize the literature. Ultimately, we find that select PCMs are ready for deployment with HPWHs for performance improvement, and component design and control optimizations are new avenues of research and development required for a commercially viable PCM-integrated HPWH system.

25 ENERGY STORAGE↗
DOE OSTI2021

Clarification of creep deformation mechanism in heat-affected zone of 9Cr steels with In Situ experiments

This work quantified nonuniform creep deformation across the heterogeneous heat-affected zone (HAZ) of Grade 91 steel with sophisticated experiments, including an electric-thermal finite element model–assisted Gleeble thermomechanical simulation and a high-temperature creep testing with in situ digital image correlation (DIC). High temperature creep properties of HAZ sub-zones were quantitatively measured by the DIC. Furthermore, by utilizing peak temperature, hardness, local creep strain, and underlying microstructures, creep deformation mechanisms in HAZ were further understood. DIC measurements reveal a creep-vulnerable zone (CVZ) exposed to a peak temperature of 932°C (close to A C3 ) in the intercritical HAZ experienced the fastest creep strength degradation instead of the soft zone with the lowest hardness prior to creep. The significantly reduced precipitation strengthening from misplacement of undissolved and coarsened M 23 C 6 carbides led to a faster recrystallization of tempered martensite in the CVZ. Weak untransformed tempered martensite (ferrite grains) stabilized by local Cr enrichment from dissolved M 23 C 6 also harmed the CVZ's creep resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Behavior of astatine and bismuth in non-conventional solvents: Extraction into imidazolium-based ionic liquid and methyl anthranilate with active pharmaceuticals binary mixtures from nitric acid media

Astatine is one of the least chemically studied elements and its behavior in the presence of non- conventional solvents has not been investigated before. This work considers both hydrophobic ionic liquids and binary mixtures as alternatives to conventional solvents. The study is based on the extraction of astatine and bismuth (target material required to produce astatine) into imidazolium-based ionic liquid, and binary mixtures formed by active pharmaceuticals (ibuprofen, lidocaine) and a food grade ingredient (methyl anthranilate). It is shown that both the ionic liquid and binary mixtures can successfully extract At from nitric acid media, but extraction of Bi into the ionic liquid is very inefficient, resulting in a good separation factor for these two elements in the entire studied acidity range. Extraction of At into binary mixtures is very efficient, having distribution ratio values as high as 1000, while the behavior of Bi under these conditions depends on the composition of the mixture. Furthermore, a mathematical model has been developed to fit both At and Bi experimental data and applied to determine corresponding thermodynamic extraction constants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Benefits and challenges in deployment of low global warming potential R290 refrigerant for room air conditioning equipment in California

High global warming potential gases (“high GWP”) are the fastest growing sector of greenhouse gas emissions in the world and in California and are primarily used as refrigerant gases in refrigeration and cooling equipment. Hydrofluorocarbons (HFCs) refrigerants are the dominant type of high GWP gases with GWP values thousands of times larger than CO 2 on a 100-year timescale. Refrigerant-grade propane (“R290”) has a very low GWP (GWP = 3.3) with good thermodynamic properties and good cooling equipment performance but the flammability of any leaked refrigerant makes equipment design, handling, and maintenance critical factors to manage. This paper focuses on the potential climate benefits and costs of transitioning to R290 refrigerant in small room air conditioning (AC) units, specifically window AC, packaged terminal AC/heat pumps (PTAC/PTHP), and mini-split heat pumps. Overall climate impact for a transition to all three types of air conditioning units in the 2022–2051 timeframe is found to be from 15 to 64 million metric tons of greenhouse gas (GHG) savings in California with a cost of saved CO 2 eq that ranges from $14.50 per ton of CO 2 eq saved to -$50.30 per ton of CO 2 eq saved (net savings) depending on whether the baseline refrigerant is R32 or R410A and depending on the relative energy efficiency for R290 units compared to baseline units.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Chemical compatibility of hollow ceramic cenospheres as thermal insulation for high-temperature thermal energy storage applications with molten nitrate salt

An effective insulation material that is both thermally and chemically stable in molten salts could transform the design of molten-salt-based thermal energy storage (TES) tanks. Most current molten salt TES tanks hold the metallic tank structure in direct contact with hot salt inventory, a design which leads to thermal expansion of the tank and triggers stresses that can lead to thermomechanical failures. With an internal insulation to lower the temperature at the tank structure, the extent of thermal expansion can be reduced, thereby reducing expansion-induced stresses and allowing for consideration of lower-cost tank structure materials. Conventional insulation materials are either 1) too porous and allow molten salts to permeate into the matrix, which significantly increases the thermal conductivity or 2) too dense and have a thermal conductivity that cannot provide sufficient thermal insulation. This paper presents an alternative thermal insulation concept using cenospheres which have an alumino-silicate structure. The cost analysis suggests that the low-density cenospheres can be one of the cheapest materials to provide cost-effective thermal insulation. The chemical compatibility of cenospheres is investigated in molten 60 wt% NaNO3/40 wt% KNO3 salt which is close to industrial-grade Solar Salt. This paper shows that diffusion of the sodium and potassium cations from the salt into the cenospheres occurs based on weight analysis, energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy. The cation diffusion breaks the bridging oxygen bonds and causes volume expansion of the microstructure which is responsible for the failure of the cenosphere particles. The chemical composition of the cenospheres is found to affect their compatibility with molten nitrate salt. A cenosphere product with low iron content showed the best compatibility with an average survival rate of 77.9% +/- 9.8% after 7 days of immersion in the molten nitrate salt. While even the low-iron cenospheres appear to require protection from direct molten salt contact, their slow degradation rate, closed-cell porosity, and low cost hold potential for effective use as internal tank insulation.

14 SOLAR ENERGY↗
DOE OSTI2024

The effect of remnant CdSe layers on the performance of CdSeTe/CdTe photovoltaic devices

Thin film CdTe-based photovoltaic devices have achieved high efficiency above 22 %. The recent improvement in efficiency is due to Se alloying in the CdTe absorbers to form a CdSeTe/CdTe structure. The subsequent band gap grading increases the short circuit current density. The Se can be introduced by depositing a precursor thin film of either CdSe or a CdSeTe alloy and then diffusing the Se into the CdTe during the high temperature cadmium chloride activation process. Using CdSe is preferred because it is easier to control the Se concentration. However, during fabrication of the CdSeTe/CdTe devices, the CdSe thickness needs to be precisely controlled to prevent the retention of a CdSe remnant layer after the activation treatment. Retention of a remnant CdSe layer causes a dramatic reduction in device efficiency. In this work, we show that the reduction in efficiency is caused by a number of factors. The remnant CdSe layer is n-type which moves the position of the p-n junction. Also, it is widely thought that the CdSe remnants are photo-inactive. In this work, we clarify that the individual CdSe grains are actually highly photo-active. However, the grain sizes in the CdSe remnant and the adjacent CdSeTe layer are very small resulting in a high grain boundary area. Although the grain boundaries are passivated with chlorine, cathodoluminescence imaging and electrical measurements show that this is only partially effective. Also, EQE measurements show that the remnant CdSe causes parasitic absorption. Overall, the remnant CdSe layer causes a reduction in short circuit current density and device efficiency. The thickness of the CdSe precursor layer and the cadmium chloride activation process conditions must be precisely optimised to ensure that all the CdSe is consumed and inter-diffused to form the CdSeTe alloy for highest efficiency devices.

CdSe remnant↗
DOE OSTI2021

High-throughput characterization of Lu-doped zirconia

Lu-doped zirconia (LuDZ) was reported in the 1960s to be a poor oxygen ion conductor. However, we identified this system as worthy of reexamination based on the results of a machine learning-based screen for promising oxygen ion conductors, further supported by a physical argument: because Lu is the heaviest and smallest of the lanthanides, it should offer the possibility of high conductivity due to its high polarizability and size compatibility with the zirconia structure. Here the relationship between dopant concentration and conductivity in the LuDZ system was determined using a high throughput experimental methodology in which spatially resolved conductivity was measured across a compositionally graded film, spanning from Zr 0.93 Lu 0.07 O 1.965 to Zr 0.82 Lu 0.18 O 1.91 . The conductivity broadly peaks with composition at 15 cation % Lu, coinciding with the approximate phase boundary of the fully stabilized cubic phase. The composition-dependent conductivity measurements reveal a surprising increase in activation energy for ion transport with increasing Lu content with no change in this trend at the composition of the conductivity maximum. The pre-exponential factor increases sharply with Lu content, but displays a distinct plateau once the conductivity maximum composition is attained. At 500 °C, the conductivity of Zr 0.85 Lu 0.15 O 1.925 is 2 × 10 –3 S cm –1 , approaching that of optimally doped Sc-stabilized zirconia, which has the highest reported conductivity among zirconia compounds. In comparison to other oxide ion conductors, Lu-stabilized zirconia offers the advantage over ceria of negligible electronic conductivity and is easier to process than (La,Sr)(Ga,Mg)O 3-δ .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Silicon Dioxide Deposited Using Atmospheric Pressure Plasma Chemical Vapor Deposition for Improved Adhesion and Water Intrusion Resistance for Lightweight Manufacturing

This work aims to demonstrate the barrier coating, and adhesion promoting properties of silica-based coatings deposited using an atmospheric pressure plasma torch (APPT). This is achieved by applying an industrial grade adhesive to silica thin films deposited, on the surfaces to be joined, using atmospheric pressure plasma chemical vapor deposition (APP-CVD), to make single joint lap shear samples of different metal combinations commonly found in lightweight manufacturing such as aluminum and magnesium as well as steel. To deposit these thin films, two separate silicon based organic precursors, hexamethyldisiloxane (HMDSO), and tetraehylorthosilicate (TEOS), are used. Here, samples are bonded using DuPont Betamate 1486 adhesive, and the lap shear results for these films are compared to the lap shear results of a chemically cleaned control using the same adhesive. The APPT uses a microwave power supply and gas mixtures of N 2 and Ar. The adhesion of the films are tested using lap shear, and elevated temperature water soaks are conducted on the joints as well to simulate environmental exposure. Lap shear results from samples with silica thin films max shear stress are 25%-115% increase compared to control samples depending on material. After exposure to water soak the max shear strength of the joints decreased by less than 15%, which demonstrates the films capabilities as a water barrier. Film morphology is examined using Scanning Electron Microscopy (SEM), and the film’s composition and approximate thickness are obtained using Rutherford Backscattering Spectroscopy (RBS).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Direct recycling and remanufacturing of anode scraps

With the rapid expansion of Li-ion battery production, significant amounts of electrode scraps that need to be recycled are being produced during cell manufacturing. Anode scrap that comprises critical materials such as graphite and valuable Cu should be recycled and reintegrated into the battery supply chain. This study reports a simple yet efficient water-based recovery process for delaminating anode films from Cu foils through the intercalation of water between the hydrophilic Cu foil and hydrophobic anode coating. Because of the absence of harsh chemicals, the recovered anode films and Cu foils are battery grade and free of damage in terms of physical and chemical properties. This study also demonstrates the reprocessing of those anode films into a new anode that exhibits electrochemical performance similar to that of the pristine anode. We report this environmentally friendly and cost-effective separation technique allows battery manufacturers to directly recycle and reuse their electrode scraps safely and effectively on-site.

25 ENERGY STORAGE↗
DOE OSTI2020

Samarium isotope compositions of uranium ore concentrates: A novel nuclear forensic signature

Uranium ore is mined and milled to produce uranium ore concentrate (UOC), a regulated product of the nuclear fuel cycle. Additionally, diversion of UOC from the fuel cycle into possible weapons production is a key concern in global nonproliferation efforts. As such, the ability to trace the origin of seized nuclear materials is imperative to law enforcement efforts. Although isotopic signatures of UOCs have proven fruitful to pinpoint sample provenance, new isotopic signatures are needed because most existing isotopic signatures are not indicative of the original ore body from which the U is derived. In this work, we developed a new method to separate samarium (Sm) from a U-rich sample matrix and report the first Sm isotope compositions of 32 UOCs derived from a variety of worldwide uranium mines. Relative to terrestrial standards, approximately half the UOCs have resolved and anticorrelated 149 Sm- 150 Sm isotope compositions, consistent with the capture of thermal neutrons by 149 Sm in the ore body. The UOCs with anomalous Sm isotope compositions tend to derive from older (~>1.5Ga) and higher-grade ore bodies, although other factors, such as the presence of neutron moderators like water, also play a role. Nonetheless, the Sm isotope compositions of UOCs directly reflects the neutron fluence over the history of the original ore body and can be used to discern different geologic conditions associated with that ore body. Overall, this work demonstrates the potential use of Sm isotopes as a novel nuclear forensics signature for origin assessment of UOCs.

58 GEOSCIENCES↗
DOE OSTI2023

A multi-collector ICP-MS method for quantification of plutonium, uranium, and americium in hair and nails of occupationally or medically exposed individuals

The 239 Pu, 238 U, and 241 Am concentrations and 239 Pu/ 240 Pu, 235 U/ 238 U, and 236 U/ 238 U atom ratios were measured in the hair and nail samples from individuals who donated their bodies to the United States Transuranium and Uranium Registries. Further, the concentration of 239 Pu ranged from 0.22–15.8 ng/kg. The 240 Pu/ 239 Pu isotopic ratios ranged from 0.026 to 0.127 which is consistent with weapons-grade plutonium. Concentration of uranium fell between 1.84 µg/kg and 29.5 µg/kg and 235 U/ 238 U ratios ranged from 4.8×10 -3 to 7.6×10 -3 . Elevated 236 U/ 238 U atom ratios were measured in two cases and ranged from 5.0×10 -6 – 2.4×10 -5 indicating exposure to spent or reprocessed uranium material. The concentration of 241 Am was measured in four hair samples and ranged from 0.02–0.21 ng/kg.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2022

Electrochemical-driven green recovery of lithium, graphite and cathode from lithium-ion batteries using water

The expected exponential increase in consumption of lithium-ion batteries (LIBs) would pose a unique challenge to the availability of near-critical resources like lithium and graphite in the upcoming decade. In this work, we present a lithium recovery process that utilizes a degradation mechanism, i.e., lithium plating, as a tool to concentrate metallic lithium at the anode/separator interface for convenient extraction at room temperature – using only water. Electrochemical characterization of fast charged (1–6 C) LIBs yielded a maximum capacity fade of 50% over ten cycles. The lithium plating was confirmed via voltage plateau analysis, coulombic efficiency, and DC resistance measurements. A maximum lithium plating condition was observed to exist between 4C and 5C, thereby limiting the energy consumption in the extraction process. Post-mortem film thickness measurement showed an incrementing film deposition with a maximum of 35 µm thickness. SEM and XPS analysis confirmed increasing concentration of a dense dendritic metallic lithium deposition on the anode/separator interface with C-rate. A green recovery process was adopted to extract the concentrated metallic lithium using distilled water. The lithium from the plated film, solid/electrolyte interface (SEI), electrolyte, anode, and cathode, was extracted as salts. A 37% improvement in lithium recoverability was achieved with fast charging under ambient conditions. XPS analysis showed ~92% of lithium yield with no residual lithium in the graphite. In addition, the battery-grade graphite was recovered with 97% purity after heat treatment of the washed anode film, and concentrated transition metals oxides in the cathode to 93% purity for convenient extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Experimental investigation of low velocity and high temperature solid particle impact erosion wear

Next generation Concentrating Solar Power (CSP) plants utilizing solid particles as the heat transfer medium (HTM) are expected to achieve greater operational efficiencies. However, the erosion from the solid particles can cause significant damage to component materials. Low particle speeds (1–2 m/s) are proposed as a means of preventing excessive damage to containment materials. Within the current investigation, solid particle erosion of three potential containment materials, stainless-steel grade 316L, a nickel alloy (Inconel 740H), and a refractory material (Tufcrete 60 M), are examined at a particle impact speed of 1.6 m/s. CarboBead-HSP 40/70 particles, a candidate HTM for CSP systems, impact the specimens at a relatively high impact angle of 60° based on containment design criteria. Experiments were conducted at ambient temperature and 800 °C to examine erosion of the materials at very low impact speeds and determine how temperature effects erosion. Initial results revealed surprising outcomes inconsistent with available literature: ambient temperature erosion of SS316L is an order of magnitude lower than IN740H, but erosion (erosion-corrosion) of SS316L at 800 °C surpasses IN740H by two orders of magnitude. Furthermore, results suggest removal of oxide layers (erosion-corrosion) is responsible for the significant erosion that was observed even at these low particle speeds.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Growth differentiation factor-15 promotes immune escape of ovarian cancer via targeting CD44 in dendritic cells

Immune escape is the main cause of the low response rate to immunotherapy for cancer, including ovarian cancer. Growth differentiation factor-15 (GDF-15) inhibits immune cell function. However, only few reports described the mechanism. Therefore, the aim of this study was to investigate the mechanism of immune escape regulated by GDF-15 in ovarian cancer. Ovarian cancer patients and healthy women were enrolled in this study. Immunohistochemistry and ELISA were performed to measure GDF-15 expression. Immunoprecipitation combined with mass spectrometry, surface plasmon resonance, and co-immunoprecipitation assay were used to evaluate the interaction between GDF-15 and the surface molecules of DCs. Immunofluorescence analysis, flow cytometry and transwell assay were used to evaluate additional effects of GDF-15 on DCs. The results showed that GDF-15 expression was higher in the ovarian cancer patients compared to that in the healthy women. The TIMER algorithm revealed that highly GDF-15 expression is associated with immune DC infiltration in immunoreactive high-grade serous carcinoma. A further study showed that GDF-15 suppressed DCs maturation, as well as IL-12p40 and TNF-α secretion, the length and number of protrusions and the migration. More importantly, CD44 in the surface of DCs interacted with GDF-15. The overexpression of CD44 in DCs resulted in the suppression of the inhibitory effect of GDF-15 on the length and number of DC synapses. In DCs overexpressing CD44 the inhibition of GDF-15 on the expression of CD11c, CD83 and CD86 was decreased, while in DCs with a knockdown of CD44 the inhibition was further enhanced. Knockdown of CD44 in DCs enhanced the inhibitory effect of GDF-15 on DC migration, while the overexpression of CD44 inhibited the inhibitory effect of GDF-15 on DC migration. In conclusion, the present study suggested that GDF-15 might facilitate ovarian cancer immune escape by interacting with CD44 in DCs to inhibit their function.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

ACBD3 is up-regulated in gastric cancer and promotes cell cycle G1-to-S transition in an AKT-dependent manner

Highlights: • ACBD3 is up-regulated in gastric cancer. • ACBD3 regulates cell-cycle of gastric cancer in an AKT-dependent manner. It has been reported that ACBD3 is closely related to the malignant process of cells, but its role in gastric cancer has not been elucidated. This study aims to investigate the expression and function of ACBD3 in human gastric cancer. The Cancer Genome Atlas (TCGA) database were selected to analyze mRNA levels of ACBD3 in gastric cancer tissues and normal gastric epithelial tissues. qPCR and Western blot were conducted to detect the expression of ACBD3 in two normal gastric epithelial cell lines and five gastric cancer cell lines which were cultured in our laboratory. To exclude differences in individual background between different patients, we further detected the expression of ACBD3 in 8 pairs of malignant/non-malignant clinical gastric tissues. Through the establishment of stable cells, in vitro cell experiments and in vivo xenotransplantation models in mice, the role of ACBD3 in the proliferation of gastric cancer cells has been further explored. AKT inhibitors were used to deeply explore the molecular regulation mechanism of ACBD3. The results showed that the elevated ACBD3 in gastric cancer tissue were positively correlated with the clinical grade and prognosis of gastric cancer. In terms of molecular function, we found that ACBD3 can enhance the production and growth of gastric cancer cells. At the same time, the activation of AKT kinase played an important role in ACBD3's promotion of G1-to-S transition. The experiments generally indicate that ACBD3 is expected to become a potential diagnostic molecule or therapeutic target for gastric cancer.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Optimized simple and affordable procedure for differentiation of monocyte-derived dendritic cells from LRF: An accessible and valid alternative biological source

Dendritic cells are one of the most popular immune cells, which plays a remarkable role in both immunotherapy and tolerance induction. Due to unwanted side effects of leukocyte presence in donated blood, the policy of blood service is the pre-storage reduction of leukocytes, which today, filtration is the most common method for this purpose. The filtration method has led to diminished access to Buffy coat as a generally used conventional source of biological cells. We developed a simple, affordable, and reproducible method for dendritic cell differentiation from filter-derived monocytes and, the results of the filter study were compared with differentiated DCs from the conventional buffy coat-derived monocytes. The Monocytes were recovered from leukoreduction filter using an optimized protocol with supplemented PBS buffer. Following the adhesion method, CD14{sup +} Monocyte-enriched population with the purity of 94 % was obtained. After cytokine stimulation over a 6-day period and maturation induction by LPS, differentiated DCs were evaluated for morphology, surface markers (CD86, CD40, CD83 and, HLA-DR), antigen uptake potency and IL-12 secretion. Analysis and comparison of the results represented no significant difference between the two groups. Accordingly, we conclude that leukoreduction filters could be introduced as a reliable and research-grade source of monocyte for DC generation in biological research.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

CPT2 downregulation triggers stemness and oxaliplatin resistance in colorectal cancer via activating the ROS/Wnt/β-catenin-induced glycolytic metabolism

Highlights: • CPT2 was downregulated in CRC. • CPT2 suppressed the proliferation and glycolytic metabolism in CRC cells. • CPT2 inhibited cancer stem cell properties and oxaliplatin resistance in CRC. • CPT2 attenuated CRC tumor growth and enhanced oxaliplatin sensitivity in vivo. • CPT2 functioned via suppressing ROS/Wnt/β-catenin pathway in CRC. Carnitine palmitoyltransferase 2 (CPT2) has been demonstrated to act as a tumor promotor or suppressor in different types of cancers. However, little is known about the effect of CPT2 on colorectal cancer (CRC). In the present study, we analyzed CPT2 expression in CRC tissues and cells. CPT2 was overexpressed in CRC cell lines (SW480 and RKO), and its effects and molecular mechanism on the proliferation, glycolysis, stemness, and oxaliplatin sensitivity were investigated. The xenograft experiment was used to confirm the influence of CPT2 on CRC tumorigenesis in vivo. We found that CPT2 expression was significantly downregulated in CRC patients, and its lower expression was associated with the poor prognosis, large tumor size, advanced TNM stage, and poor histological grade differentiation of patients. Upregulation of CPT2 significantly inhibited the proliferation, glycolytic metabolism, cancer stem cell properties, and oxaliplatin resistance in CRC cells. Also, the increase of CPT2 inhibited tumorigenesis, stemness and glycolysis, while enhanced oxaliplatin sensitivity in mouse models. Mechanistically, CPT2 functioned via suppressing the activation of Wnt/β-catenin pathway through repressing ROS production. In conclusion, our results demonstrated that CPT2 was decreased in CRC, and CPT2 downregulation could trigger stemness and oxaliplatin resistance in CRC via activating the ROS/Wnt/β-catenin-induced glycolytic metabolism. This study indicates that CPT2 is a potential therapeutic target for CRC.

60 APPLIED LIFE SCIENCES↗