Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “finite difference methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Strain-energy-release rate analysis of the end-notched flexure specimen using the finite-element method

Two-dimensional finite-element analysis of the end-notched flexure specimen was performed using 8-node isoparametric, parabolic elements to evaluate compliance and mode II strain energy release rates, G sub II. The G sub II values were computed using two different techniques: the virtural crack-closure technique (VCCT) and the rate of change of compliance with crack length (compliance derivative method). The analysis was performed for various crack-length-to-semi-span (a/L) ratios ranging from 0.2 to 0.9. Three material systems representing a wide range of material properties were analyzed. The compliance and strain energy release rates of the specimen calculated with the present finite-element analysis agree very well with beam theory equations including transverse shear. The G sub II values calculated using the compliance derivative method compared extremely well with those calculated using the VCCT. The G sub II values obtained by the compliance derivative method using the top or bottom beam deflections agreed closely with each other. The strain energy release rates from a plane-stress analysis were higher than the plane-strain values by only a small percentage, indicating that either assumption may be used in the analysis. The G sub II values for one material system calculated from the finite-element analysis agreed with one solution in the literature and disagreed with the other solution in the literature.

Salpekar, S. A.↗
NASA NTRS1988

Strain energy release rate analysis of the end-notched flexure specimen using the finite-element method

Two-dimensional finite-element analysis of the end-notched flexure specimen was performed using 8-node isoparametric, parabolic elements to evaluate compliance and mode II strain energy release rates, G sub II. The G sub II values were computed using two different techniques: the virtual crack-closure technique (VCCT) and the rate of change of compliance with crack length (compliance derivative method). The analysis was performed for various crack-length-to-semi-span (a/L) ratios ranging from 0.2 to 0.9. Three material systems representing a wide range of material properties were analyzed. The compliance and strain energy release rates of the specimen calculated with the present finite-element analysis agree very well with beam theory equations including transverse shear. The G sub II values calculated using the compliance derivative method compared extremely well with those calculated using the VCCT. The G sub II values obtained by the compliance derivative method using the top or bottom beam deflections agreed closely with each other. The strain energy release rates from a plane-stress analysis were higher than the plane-strain values by only a small percentage, indicating that either assumption may be used in the analysis. The G sub II values for one material system calculated from the finte-element analysis agreed with one solution in the literature and disagreed with the other solution in the literature.

Salpekar, S. A.↗
NASA NTRS1988

A transonic interactive boundary-layer theory for laminar and turbulent flow over swept wings

A 3-D laminar and turbulent boundary-layer method is developed for compressible flow over swept wings. The governing equations and curvature terms are derived in detail for a nonorthogonal, curvilinear coordinate system. Reynolds shear-stress terms are modeled by the Cebeci-Smith eddy-viscosity formulation. The governing equations are descretized using the second-order accurate, predictor-corrector finite-difference technique of Matsuno, which has the advantage that the crossflow difference formulas are formed independent of the sign of the crossflow velocity component. The method is coupled with a full potential wing/body inviscid code (FLO-30) and the inviscid-viscous interaction is performed by updating the original wing surface with the viscous displacement surface calculated by the boundary-layer code. The number of these global iterations ranged from five to twelve depending on Mach number, sweep angle, and angle of attack. Several test cases are computed by this method and the results are compared with another inviscid-viscous interaction method (TAWFIVE) and with experimental data.

Woodson, Shawn H.↗
NASA NTRS1996

A New Class of Finite Difference Schemes

Fluid flows in the transitional and turbulent regimes possess a wide range of length and time scales. The numerical computation of these flows therefore requires numerical methods that can accurately represent the entire, or at least a significant portion, of this range of scales. The inaccurate representation of small scales is inherent to non-spectral schemes. This can be detrimental to computations where the energy in the small scales is comparable to that in the larger scales, e.g. large-eddy simulations of high Reynolds number turbulence. The inaccurate numerical representation of the small scales in these large-eddy simulations can result in the numerical error overwhelming the contribution of the subgrid-scale model.

Mahesh, K.↗
NASA NTRS1994

Computation of helicopter rotor acoustics in forward flight

This paper presents a new method for computing acoustic signals from helicopter rotors in forward flight. The aerodynamic and acoustic solutions in the near field are computed with a finite-difference solver for the Euler equations. A nonrotating cylindrical Kirchhoff surface is then placed around the entire rotor system. This Kirchhoff surface moves subsonically with the rotor in forward flight. The finite-difference solution is interpolated onto this cylindrical surface at each time step and a Kirchhoff integration is used to carry the acoustic signal to the far field. Computed values for high-speed impulsive noise show excellent agreement with model-rotor and flight-test experimental data. Results from the new method offer high accuracy with reasonable computer resource requirements.

Strawn, Roger↗
NASA NTRS1989

A high-order Lagrangian-decoupling method for the incompressible Navier-Stokes equations

A high-order Lagrangian-decoupling method is presented for the unsteady convection-diffusion and incompressible Navier-Stokes equations. The method is based upon: (1) Lagrangian variational forms that reduce the convection-diffusion equation to a symmetric initial value problem; (2) implicit high-order backward-differentiation finite-difference schemes for integration along characteristics; (3) finite element or spectral element spatial discretizations; and (4) mesh-invariance procedures and high-order explicit time-stepping schemes for deducing function values at convected space-time points. The method improves upon previous finite element characteristic methods through the systematic and efficient extension to high order accuracy, and the introduction of a simple structure-preserving characteristic-foot calculation procedure which is readily implemented on modern architectures. The new method is significantly more efficient than explicit-convection schemes for the Navier-Stokes equations due to the decoupling of the convection and Stokes operators and the attendant increase in temporal stability. Numerous numerical examples are given for the convection-diffusion and Navier-Stokes equations for the particular case of a spectral element spatial discretization.

Ho, Lee-Wing↗
NASA NTRS1979

An elliptic representation of coupled boundary layers and inviscid core for computation of separated internal flows

This report presents a viscous-inviscid calculation method for the prediction of turbulent incompressible flows in diffusers with small regions of stall. Integral turbulent boundary layer equations (BLE) are used to provide boundary conditions for a finite difference representation of the inviscid core. The BLE are applied at the floating displacement-thickness line, resulting in a simulataneous set of nonlinear block tridiagonal equations which are solved iteratively using a sucessive line-relaxation technique. Results of the method have been applied to calculate the performance of a variety of asymmetric stalled diffusers.

Ghose, S.↗
NASA NTRS1984

Newton like: Minimal residual methods applied to transonic flow calculations

A computational technique for the solution of the full potential equation is presented. The method consists of outer and inner iterations. The outer iterate is based on a Newton like algorithm, and a preconditioned Minimal Residual method is used to seek an approximate solution of the system of linear equations arising at each inner iterate. The present iterative scheme is formulated so that the uncertainties and difficulties associated with many iterative techniques, namely the requirements of acceleration parameters and the treatment of additional boundary conditions for the intermediate variables, are eliminated. Numerical experiments based on the new method for transonic potential flows around the NACA 0012 airfoil at different Mach numbers and different angles of attack are presented, and these results are compared with those obtained by the Approximate Factorization technique. Extention to three dimensional flow calculations and application in finite element methods for fluid dynamics problems by the present method are also discussed. The Inexact Newton like method produces a smoother reduction in the residual norm, and the number of supersonic points and circulations are rapidly established as the number of iterations is increased.

Wong, Y. S.↗
NASA NTRS1985

Newton-like minimal residual methods applied to transonic flow calculations

A computational technique for the solution of the full potential equation is presented. The method consists of outer and inner iterations. The outer iterate is based on a Newton like algorithm, and a preconditioned Minimal Residual method is used to seek an approximate solution of the system of linear equations arising at each inner iterate. The present iterative scheme is formulated so that the uncertainties and difficulties associated with many iterative techniques, namely the requirements of acceleration parameters and the treatment of additional boundary conditions for the intermediate variables, are eliminated. Numerical experiments based on the new method for transonic potential flows around the NACA 0012 airfoil at different Mach numbers and different angles of attack are presented, and these results are compared with those obtained by the Approximate Factorization technique. Extention to three dimensional flow calculations and application in finite element methods for fluid dynamics problems by the present method are also discussed. The Inexact Newton like method produces a smoother reduction in the residual norm, and the number of supersonic points and circulations are rapidly established as the number of iterations is increased.

Wong, Y. S.↗
NASA NTRS1972

Hydrodynamic water impact

The hydrodynamic impact of a falling body upon a viscous incompressible fluid was investigated by numerically solving the equations of motion. Initially the mathematical model simulated the axisymmetric impact of a rigid right circular cylinder upon the initially quiescent free surface of a fluid. A compressible air layer exists between the falling cylinder and the liquid free surface. The mathematical model was developed by applying the Navier-Stokes equations to the incompressible air layer and the incompressible fluid. Assuming the flow to be one dimensional within the air layer, the average velocity, pressure and density distributions were calculated. The liquid free surface was allowed to deform as the air pressure acting on it increases. For the liquid the normalized equations were expressed in two-dimensional cylindrical coordinates. The governing equations for the air layer and the liquid were expressed in finite difference form and solved numerically. For the liquid a modified version of the Marker-and-Cell method was used. The mathematical model has been reexamined and a new approach has recently been initiated. Essentially this consists of examining the impact of an inclined plate onto a quiesent water surface with the equations now formulated in cartesian coordinates.

Kettleborough, C. F.↗
NASA NTRS1981

A general mapping procedure for variable area duct acoustics

A general mapping procedure is described and applied to the study of noise propagation in variable area ducts. The mapping provides a boundary fitted co-ordinate system which is ideal for the finite difference solution of acoustic fields with irregular boundaries, without the burden of large matrices required by finite element methods. The procedure is first described in general and then applied to a particular two-dimensional geometry under current experimental investigation. This method should be ideally suited to the study of high frequency noise propagation in variable area ducts and in cases where the far field is included in the calculation procedure. Moreover, the current approach can be directly extended to three-dimensions, resulting in numerical calculation over a rectangular parallelepiped in the transformed plane.

White, J. W.↗
NASA NTRS1983

Numerical simulation of two-dimensional heat transfer in composite bodies with application to de-icing of aircraft components

Transient, numerical simulations of the de-icing of composite aircraft components by electrothermal heating were performed for a two dimensional rectangular geometry. The implicit Crank-Nicolson formulation was used to insure stability of the finite-difference heat conduction equations and the phase change in the ice layer was simulated using the Enthalpy method. The Gauss-Seidel point iterative method was used to solve the system of difference equations. Numerical solutions illustrating de-icer performance for various composite aircraft structures and environmental conditions are presented. Comparisons are made with previous studies. The simulation can also be used to solve a variety of other heat conduction problems involving composite bodies.

Chao, D. F. K.↗
NASA NTRS1984

Application of the implicit MacCormack scheme to the parabolized Navier-Stokes equations

MacCormack's implicit finite-difference scheme was used to solve the two-dimensional parabolized Navier-Stokes (PNS) equations. This method for solving the PNS equations does not require the inversion of block tridiagonal systems of algebraic equations and permits the original explicit MacCormack scheme to be employed in those regions where implicit treatment is not needed. The advantages and disadvantages of the present adaptation are discussed in relation to those of the conventional Beam-Warming scheme for a flat plate boundary layer test case. Comparisons are made for accuracy, stability, computer time, computer storage, and ease of implementation. The present method was also applied to a second test case of hypersonic laminar flow over a 15% compression corner. The computed results compare favorably with experiment and a numerical solution of the complete Navier-Stokes equations.

Lawrence, J. L.↗
NASA NTRS1990

Optimum element density studies for finite-element thermal analysis of hypersonic aircraft structures

Different finite element models previously set up for thermal analysis of the space shuttle orbiter structure are discussed and their shortcomings identified. Element density criteria are established for the finite element thermal modelings of space shuttle orbiter-type large, hypersonic aircraft structures. These criteria are based on rigorous studies on solution accuracies using different finite element models having different element densities set up for one cell of the orbiter wing. Also, a method for optimization of the transient thermal analysis computer central processing unit (CPU) time is discussed. Based on the newly established element density criteria, the orbiter wing midspan segment was modeled for the examination of thermal analysis solution accuracies and the extent of computation CPU time requirements. The results showed that the distributions of the structural temperatures and the thermal stresses obtained from this wing segment model were satisfactory and the computation CPU time was at the acceptable level. The studies offered the hope that modeling the large, hypersonic aircraft structures using high-density elements for transient thermal analysis is possible if a CPU optimization technique was used.

Ko, William L.↗
NASA NTRS1991

Conical cut radar cross section calculations for a thin, perfectly conducting plate

Radar Cross Section (RCS) calculations for flat, perfectly conducting plates are readily available through the use of conventional frequency domain techniques such as the Method of Moments. However, if time domain scattering or wideband frequency domain results are desired, then the Finite Difference Time Domain (FDTD) technique is a suitable choice. In this paper, we present the application of the Finite Difference Time Domain (FDTD) technique to the problem of electromagnetic scattering and RCS calculations from a thin, perfectly conducting plate for a conical cut in the scattering angle phi. RCS calculations versus angle phi will be presented and discussed.

Luebbers, Raymond J.↗
NASA NTRS1991

Conical cut radar cross section calculations for a thin, perfectly conducting plate

Radar cross section (RCS) calculations for flat, perfectly conducting plates are readily available through the use of conventional frequency domain techniques such as the method of moments. However, if time domain scattering or wideband frequency domain results are desired, then the finite difference time domain (FDTD) technique is a suitable choice. We present the application of the FDTD technique to the problem of electromagnetic scattering and RCS calculations from a thin, perfectly conducting plate for a conical cut in the scattering angle phi. RCS calculations versus angle phi are presented and discussed.

Luebbers, Raymond J.↗
NASA NTRS1992

Transonic aeroelastic computations on wings using Navier-Stokes equations

Aeroelastic computations are made on fighter type wings in the transonic regime. The flow is modeled using the Navier-Stokes equations and is coupled with structural equations of motion. The flow equations are solved by a time accurate finite difference scheme with moving grids. The coupled aeroelastic equations of motion are solved using the linear acceleration method. The configuration adaptive dynamic grids are time-accurately generated using the aeroelastically deformed shape of the wing. Computations are made for oscillating rigid wings with moving shock waves in the presence of leading edge vortices. The computed results compare well with the experiment. Unsteady computations are made to demonstrate the shock-vortex interaction phenomenon on wings in ramp motion. Effects of flexibility and pitch rate are demonstrated for flows with vortices.

Guruswamy, Guru P.↗