Electronic and structural properties of dense liquid and amorphous nitrogen
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
The electronic structure, optical and x-ray absorption spectra, angledependence of the cyclotron masses and extremal cross sections of the Fermisurface, phonon spectra, electron-phonon Eliashberg and transport spectralfunctions, temperature dependence of electrical resistivity of the MB2 (M=Tiand Zr) diborides were investigated from first principles using the fullpotential linear muffin-tin orbital method. The calculations of the dynamicmatrix were carried out within the framework of the linear response theory. Agood agreement with experimental data of optical and x-ray absorption spectra,phonon spectra, electron-phonon spectral functions, electrical resistivity,cyclotron masses and extremal cross sections of the Fermi surface was achieved.
Not Available
Not Available
The equilibrium structure and functional properties exhibited by brownmillerite oxides, a family of perovskitederived structures with alternating layers of BO6 octahedra and BO4 tetrahedra, viz., ordered arrangements of oxygen vacancies, is dependent on a variety of competing crystal-chemistry factors. We use electronic structure calculations to disentangle the complex interactions in two ferrates, Sr2Fe2O5 and Ca2Fe2O5, relating the stability of the equilibrium (strain-free) and thin film structures to both previously identified and herein newly proposed descriptors.We show that cation size and intralayer separation of the tetrahedral chains provide key contributions to the preferred ground state. We show the bulk ground-state structure is retained in the ferrates over a range of strain values; however, a change in the orientation of the tetrahedral chains, i.e., a perpendicular orientation of the vacancies relative to the substrate, is stabilized in the compressive region. The structure stability under strain is largely governed by maximizing the intraplane separation of the dipoles generated from rotations of the FeO4 tetrahedra. Lastly, we find that the electronic band gap is strongly influenced by strain, manifesting as an unanticipated asymmetric-vacancy alignment dependent response. This atomistic understanding establishes a practical route for the design of functional electronic materials in thin film geometries.
The electronic correlation strength is a basic quantity that characterizes the physical properties of materials such as transition metal oxides. Determining correlation strengths requires both precise definitions and a careful comparison between experiment and theory. In this paper, we define the correlation strength via the magnitude of the electron self-energy near the Fermi level. For the case of LaNiO3, we obtain both the experimental and theoretical mass enhancements m/m by considering high resolution angle-resolved photoemission spectroscopy (ARPES) measurements and density functional+dynamical mean field theory (DFT+DMFT) calculations.We use valence-band photoemission data to constrain the free parameters in the theory and demonstrate a quantitative agreement between the experiment and theory when both the realistic crystal structure and strong electronic correlations are taken into account. In addition, by considering DFT+DMFT calculations on epitaxially strained LaNiO3, we find a strain-induced evolution of m/m in qualitative agreement with trends derived from optics experiments. These results provide a benchmark for the accuracy of the DFT+DMFT theoretical approach, and can serve as a test case when considering other complex materials. By establishing the level of accuracy of the theory, this work also will enable better quantitative predictions when engineering new emergent properties in nickelate heterostructures.
We present a joint experimental and theoretical study for the electronic structures of copper oxides including Cu 2 O, CuO, and the metastable mixed-valence oxide Cu 4 O 3 . The optical band gap is determined by experimental optical absorption coefficient, and the electronic structure in valence and conduction bands is probed by photoemission and electron energy loss spectroscopies, respectively. Furthermore, we compare our experimental results with many-body GW calculations utilizing an additional on-site potential for d-orbital energies that facilitates tractable and predictive computations. The side-by-side comparison between the three oxides, including a band insulator (Cu2O) and two Mott/charge-transfer insulators (CuO, Cu 4 O 3 ) leads to a consistent picture for the optical and band-structure properties of the Cu oxides, strongly supporting indirect band gaps of about 1.2 and 0.8 eV in CuO and Cu 4 O 3 , respectively. This comparison also points towards surface oxidation and reduction effects that can complicate the interpretation of the photoemission spectra.
In the present study, a theoretical study of electron-phonon (electron-ion) coupling rates in semiconductors driven out of equilibrium is performed. Transient change of optical coefficients reflects the band gap shrinkage in covalently bonded materials, and thus, the heating of atomic lattice. Utilizing this dependence, we test various models of electron-ion coupling. The simulation technique is based on tight-binding molecular dynamics. Our simulations with the dedicated hybrid approach (XTANT) indicate that the widely used Fermi's golden rule can break down describing material excitation on femtosecond time scales. In contrast, dynamical coupling proposed in this work yields a reasonably good agreement of simulation results with available experimental data.
The electronic band structure of correlated Ca 3 Ru 2 O 7 featuring an antiferromagnetic (AFM) as well as a structural transition has been determined theoretically at high temperatures, which has led to the understanding of the remarkable properties of Ca 3 Ru 2 O 7 , such as the bulk spin-valve effects. However, its band structure and Fermi surface (FS) below the structural transition have not been resolved, even though a FS consisting of electron pockets was found experimentally. Here we report magnetoelectrical transport and thermoelectric measurements with the electric current and temperature gradient directed along the a and b axes, respectively, of an untwined single crystal of Ca 3 Ru 2 O 7 . The thermopowers obtained along the two crystal axes were found to show opposite signs at low temperatures, demonstrating the presence of both electron and hole pockets on the FS. In addition, how the FS evolves across T* = 30K at which a distinct transition from coherent to incoherent behavior occurs was also inferred: the Hall and Nernst coefficient results suggest a temperature- and momentum-dependent partial gap opening in Ca 3 Ru 2 O 7 below the structural transition with a possible Lifshitz transition occurring at T*. In conclusion, the experimental demonstration of a correlated semimetal ground state in Ca 3 Ru 2 O 7 calls for further theoretical studies of this remarkable material.
alpha-particle spectra of Cf-249 have been measured with a double-focusing magnetic spectrometer and with passivated implanted planar silicon (PIPS) detectors. The conversion-electron spectra of Cf-249 have been measured with a cooled Si(Li) detector and with a room-temperature PIPS detector. Precise energies of a groups in the decay of Cf-249 have been measured with respect to the known energy of Cf-250. In addition, alpha-electron, alpha-gamma, and gamma-gamma coincidence measurements were also performed to determine the spin-parity of the previously known 643.64-keV level. From electron intensities, conversion coefficients of transitions in the daughter Cm-245 have been determined. The measured L-3 conversion coefficients of the 333.4- and 388.2-keV transitions are found to be in agreement with the theoretical conversion coefficients for pure E1 multipolarity. On the other hand, the K, L-1 + L-2, M, and N conversion coefficients are approximately twice the theoretical values for pure E1 transitions. These measurements indicate anomalous E1 conversion coefficients for the 333.4- and 388.2-keV transitions, as has been pointed out in earlier measurements. The measured conversion coefficient of the 255.5-keV transition gives an M1 multipolarity for this transition which establishes a spin-parity of 7/2(-) and the 7/2(-)[743] single-particle assignment to the 643.64-keV level.
We experimentally isolate, characterize, and coherently control up to six individual nuclear spins that are weakly coupled to an electron spin in diamond. Our method employs multipulse sequences on the electron spin that resonantly amplify the interaction with a selected nuclear spin and at the same time dynamically suppress decoherence caused by the rest of the spin bath. We are able to address nuclear spins with interaction strengths that are an order of magnitude smaller than the electron spin dephasing rate. Our results provide a route towards tomography with single-nuclear-spin sensitivity and greatly extend the number of available quantum bits for quantum information processing in diamond.
The first direct measurement of electron neutrino quasielastic and quasielasticlike scattering on hydrocarbon in the few-GeV region of incident neutrino energy has been carried out using the MINERvA detector in the NuMI beam at Fermilab. The flux-integrated differential cross sections in the electron production angle, electron energy, and Q 2 are presented. The ratio of the quasielastic, flux-integrated differential cross section in Q 2 for ν e with that of similarly selected ν μ -induced events from the same exposure is used to probe assumptions that underpin conventional treatments of charged-current νe interactions used by long-baseline neutrino oscillation experiments. Furthermore, the data are found to be consistent with lepton universality and are well described by the predictions of the neutrino event generator GENIE.
Structural phase transitions and soft phonon modes pose a longstanding challenge to computing electron-phonon (e-ph) interactions in strongly anharmonic crystals. Here we develop a first-principles approach to compute e-ph scattering and charge transport in materials with anharmonic lattice dynamics. Our approach employs renormalized phonons to compute the temperature-dependent e-ph coupling for all phonon modes, including the soft modes associated with ferroelectricity and phase transitions. We show that the electron mobility in cubic SrTiO 3 is controlled by scattering with longitudinal optical phonons at room temperature and with ferroelectric soft phonons below 200 K. Our calculations can accurately predict the temperature dependence of the electron mobility in SrTiO 3 between 150-300 K, and reveal the microscopic origin of its roughly T -3 trend. Our approach enables first-principles calculations of e-ph interactions and charge transport in broad classes of crystals with phase transitions and strongly anharmonic phonons.
Here, we propose a new method for self-injection of high-quality electron bunches in the plasma wakefield structure in the blowout regime utilizing a “flying focus” produced by a drive beam with an energy chirp. In a flying focus the speed of the density centroid of the drive bunch can be superluminal or subluminal by utilizing the chromatic dependence of the focusing optics. We first derive the focal velocity and the characteristic length of the focal spot in terms of the focal length and an energy chirp. We then demonstrate using multidimensional particle-in-cell simulations that a wake driven by a superluminally propagating flying focus of an electron beam can generate GeV-level electron bunches with ultralow normalized slice emittance (~30 nm rad), high current (~17 kA), low slice energy spread (~0.1%), and therefore high normalized brightness (> 10 19 A/ m 2 /rad 2 ) in a plasma of density ~10 19 cm –3 . The injection process is highly controllable and tunable by changing the focal velocity and shaping the drive beam current. Nearterm experiments at FACET II where the capabilities to generate tens of kA, < 10 fs drivers are planned, could potentially produce beams with brightness near 10 20 A / m 2 / rad 2 .