Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Analysis of geometric and electrochemical characteristics of lithium cobalt oxide electrode with different packing densities

In order to investigate geometric and electrochemical characteristics of Li ion battery electrode with different packing densities, lithium cobalt oxide (LiCoO 2 ) cathode electrodes were fabricated from a 94:3:3 (wt%) mixture of LiCoO 2 , polymeric binder, and super-P carbon black and calendered to different densities. A synchrotron X-ray nano-computed tomography system with a spatial resolution of 58.2 nm at the Advanced Photon Source of the Argonne National Laboratory was employed to obtain three dimensional morphology data of the electrodes. The morphology data were then quantitatively analyzed to characterize their geometric properties, such as porosity, tortuosity, specific surface area, and pore size distribution. The geometric and electrochemical analysis reveal that high packing density electrodes have smaller average pore size and narrower pore size distribution, which improves the electrical contact between carbon-binder matrix and LiCoO 2 particles. The better contact improves the capacity and rate capability by reducing the possibility of electrically isolated LiCoO 2 particles and increasing the electrochemically active area. The results show that increase of packing density results in higher tortuosity, but electrochemically active area is more crucial to cell performance than tortuosity at up to 3.6 g/cm 3 packing density and 4 C rate.

25 ENERGY STORAGE↗

Functionalized mesoporous materials for adsorption and release of different drug molecules: A comparative study

The adsorption capacity and release properties of mesoporous materials for drug molecules can be improved by functionalizing their surfaces with judiciously chosen organic groups. Functionalized ordered mesoporous materials containing various types of organic groups via a co-condensation synthetic method from 15% organosilane and by post-grafting organosilanes onto a pre-made mesoporous silica were synthesized. Comparative studies of their adsorption and release properties for various model drug molecules were then conducted. Functional groups including 3-aminopropyl, 3-mercaptopropyl, vinyl, and secondary amine groups were used to functionalize the mesoporous materials while rhodamine 6G and ibuprofen were utilized to investigate the materials' relative adsorption and release properties. The self-assembly of the mesoporous materials was carried out in the presence of cetyltrimethylammonium bromide (CTAB) surfactant, which produced MCM-41 type materials with pore diameters of {approx}2.7-3.3 nm and moderate to high surface areas up to {approx}1000 m{sup 2}/g. The different functional groups introduced into the materials dictated their adsorption capacity and release properties. While mercaptopropyl and vinyl functionalized samples showed high adsorption capacity for rhodamine 6G, amine functionalized samples exhibited higher adsorption capacity for ibuprofen. While the diffusional release of ibuprofen was fitted on the Fickian diffusion model, the release of rhodamine 6G followed Super Case-II transport model. - Graphical abstract: The adsorption capacity and release properties of mesoporous materials for various drug molecules are tuned by functionalizing the surfaces of the materials with judiciously chosen organic groups. This work reports comparative studies of the adsorption and release properties of functionalized ordered mesoporous materials containing different hydrophobic and hydrophilic groups that are synthesized via a co-condensation and post-grafting methods for various model drug molecules.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The study of the crystalline phosphates of kosnarite type structure containing different alkali metals

The incorporation possibilities of different alkali elements into crystalline phosphates A{sub 1-x}A'{sub x}Hf{sub 2}(PO{sub 4}){sub 3} (A=Li, Na, K, Rb, Cs) were studied, the formation regions of kosnarite solid solutions were determined. Na{sub 0.5}K{sub 0.5}Hf{sub 2}(PO{sub 4}){sub 3} crystal structure was studied by powder X-ray diffraction, and the distribution of alkali metals in kosnarite structure was found out. The phosphate crystallizes in the space group R3c, with a=8.7295(1) A, c=23.2023(4) A, V=1531.24(4) A{sup 3}, Z=6; R{sub wp}=6.15, R{sub p}=4.43. The concentration region knowledge of the kosnarite phase existence and peculiarities of their phase formation in the A{sub 1-x}A'{sub x}M{sub 2}(PO{sub 4}){sub 3} (M=Ti, Zr, Hf) systems allow us to choose phosphate matrice compositions suitable for solidification of reprocessing wastes of spent U-Pu nuclear fuels. - Graphical abstract: The incorporation possibilities of different alkali elements into crystalline phosphates A{sub 1-x}A'{sub x}Hf{sub 2}(PO{sub 4}){sub 3} (A=Li, Na, K, Rb, Cs) were studied, the formation regions of kosnarite solid solutions were determined. Na{sub 0.5}K{sub 0.5}Hf{sub 2}(PO{sub 4}){sub 3} crystal structure was studied by powder X-ray diffraction, and the distribution of alkali metals in kosnarite structure was found out. The phosphate crystallizes in the space group R3c, with a=8.7295(1) A, c=23.2023(4) A, V=1531.24(4) A{sup 3}, Z=6; R{sub wp}=6.15, R{sub p}=4.43. The concentration region knowledge of the kosnarite phase existence and peculiarities of their phase formation in the A{sub 1-x}A'{sub x}M{sub 2}(PO{sub 4}){sub 3} (M=Ti, Zr, Hf) systems allow us to choose phosphate matrice compositions suitable for solidification of reprocessing wastes of spent U-Pu nuclear fuels.

36 MATERIALS SCIENCE↗

A series of POM-based entangled frameworks with the rigid ligand 1,4-bis(1-imidazolyl)benzene and different isomers of octamolybdate

With BIMB ligand, we have successfully obtained and characterized three novel entangled inorganic-organic hybrid compounds by choosing different metal ions, that is, [Ni(BIMB){sub 2}({gamma}-Mo{sub 8}O{sub 26}){sub 0.5}].3H{sub 2}O (1), [Zn(BIMB){sub 2}({gamma}-Mo{sub 8}O{sub 26}){sub 0.5}] (2), and [Cu{sub 3}(BIMB){sub 4}(H{sub 2}O)({delta}-Mo{sub 8}O{sub 26})Cl{sub 2}].3H{sub 2}O (3) (where BIMB=1,4-bis(1-imidazolyl)benzene). Compound 1 is a 2-fold interpenetration 4-connected 3D framework with the short Schlaefli symbol of (4x6{sup 4}x8){sub 2}(4{sup 2}x6{sup 2}x8{sup 2}), in which octamolybdate anion shows {gamma}-isomer; 2 exhibits a (5,6)-connected 3D self-penetrating topological motif with the short Schlaefli symbol of (4x5{sup 7}x6{sup 2}){sub 2}(4{sup 2}x5{sup 11}x7{sup 2}), and 3 shows a (4,6)-connected self-penetrating 3D framework with the short Schlaefli symbol of (4{sup 2}.5{sup 2}.6.7) (4{sup 4}.5.6{sup 9}.8) (5{sup 4}.6{sup 2}) whose octamolybdate has {delta}-isomer. In addition, the optical band gaps of these three compounds have been measured, which are 2.98 eV for 1, 3.42 eV for 2, and 2.88 eV for 3. Moreover, 2 has photoluminescent property, which can be attributed to ligand-to-metal charge-transfer (LMCT) band. -- Graphical abstract: With BIMB ligand, we have obtained and characterized three novel POM-based entangled hybrid compounds. Compound 1 is a 2-fold interpenetration 3D framework; 2 and 3 exhibit self-penetrating 3D polycatenated frameworks. Display Omitted highlights: > Three novel octamolybdate-based entanglement frameworks successfully obtained by choosing the rigid ligand 1,4-bis(1-imidazolyl)benzene and different metal ions. Compound 1 is a 2-fold interpenetration 4-connected 3D framework; 2 exhibits a (5,6)-connected 3D self-penetrating topological net, and 3 shows a (4,6)-connected self-penetrating 3D framework. > In compounds 1 and 2, the octamolybdate anions show the {gamma}-isomer, while in 3 the octamolybdate anion is a {delta}-isomer. > Optical band gap of these three compounds have been investigated and the results show that they are all wide gap semiconductors, which are 2.98 eV for 1, 3.42 eV for 2, and 2.88 eV for 3.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Different dimensional coordination polymers with 4,4'-oxybis(benzoate): Syntheses, structures and properties

Five transition-metal coordination polymers, namely, [Zn{sub 7}Cl{sub 6}(oba){sub 4}]{sub n} (1), [Cd{sub 7}Cl{sub 6}(oba){sub 4}]{sub n} (2), [Zn(oba)(H{sub 2}O)]{sub n} (3), [Ag{sub 2}(oba)]{sub n} (4) and [Co(oba)(H{sub 2}O){sub 2}]{sub n} (5) (H{sub 2}oba=4,4′-oxydibenzoic acid), have been achieved under hydrothermal conditions and structurally characterized by IR, elemental analyses, X-ray single-crystal diffraction and TGA. The X-ray single-crystal diffraction reveals that compounds 1 and 2 are isomorphism, featuring pillared-layer 3D motifs, in which the 2D inorganic layers (Zn{sub 6}Cl{sub 7}){sub n} (or (Cd{sub 6}Cl{sub 7}){sub n}) are connected by oba{sup 2−} pillars. Compound 3 exhibits 1D stair-like chain and extends to a 3D network by two different interchain O–H–O hydrogen bonding interactions while compound 4 features wave chains and stretches to 2D layer by interchain Ag–O weak contacts. Compound 5 shows 2D network in which Co-chains are pillared by oba{sup 2−} ligand and then forms a 3D network by four different O–H–O hydrogen bonding interactions. Furthermore, 1–4 exhibit luminescent properties at a solid state and 5 shows antiferromagnetic behavior. - Graphical abstract: Five new transition-metal coordination complexes 1–5 have been synthesized and characterized by single-crystal X-ray diffractions, IR spectra, elemental analyses, thermogravimetric analyses (TGA), photoluminescent spectra and magnetic measurement. - Highlights: • Compound 1 exhibits a pillared-layer 3D network. • The photoluminescent properties of 1–4 have been measured. • Compound 5 exhibits antiferromagnetic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long persistent and optically stimulated luminescence behaviors of calcium aluminates with different trap filling processes

Properties of long persistent luminescence (LPL) and optically stimulated luminescence (OSL) of CaAl{sub 2}O{sub 4}:Eu{sup 2+}, R{sup 3+} (R=Nd, Dy, Tm) materials were investigated. The observed phenomenon indicates that R{sup 3+} ions (R=Nd, Dy, Tm) have different effects on trap properties of CaAl{sub 2}O{sub 4}:Eu{sup 2+}. The greatly improved LPL performance was observed in Nd{sup 3+} co-doped samples, which indicates that the incorporation of Nd{sup 3+} creates suitable traps for LPL. While co-doping Tm{sup 3+} ions, the intensity of high temperature of thermoluminescence band in CaAl{sub 2}O{sub 4}:Eu{sup 2+} phosphors is enhanced for the formation of the most suitable traps which benefits the intense and stable OSL. These results suggest that the effective traps contributed to the LPL/OSL are complex, of which could be an aggregation formation with shallow and deep traps other than simple traps from co-doped R{sup 3+} ions. The mechanism presented in the end potentially provides explanations of why the OSL of CaAl{sub 2}O{sub 4}:Eu{sup 2+}, R{sup 3+} exhibits different read-in/read-out performance as well. - Graphical abstract: OSL emission spectra of Ca{sub 0.995}Al{sub 2}O{sub 4}:0.0025Eu{sup 2+}, 0.0025R{sup 3+} (R=Nd, Dy, Tm) taken under varying stimulation time (0, 25, 50, 75, 100 s). Inset: Blue emission pictures under varying stimulation time. - Highlights: • The LPL and OSL properties of CaAl{sub 2}O{sub 4}:Eu{sup 2+}, R{sup 3+} were investigated. • An alternative approach to control the trap depth of CaAl{sub 2}O{sub 4}:Eu{sup 2+} phosphor was proposed. • A new oxide ETM phosphor exhibiting intense and stable OSL was explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

([M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}]){sub ∞} (M=Zn, Mn): Three-dimensional chalcogenide frameworks constructed from quaternary metal selenide clusters with two different transition metals

Herein we report solvothermal syntheses of two new three-dimensional chalcogenide frameworks ([M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}]){sub n} (M=Zn (1), Mn (2)), which consist of quaternary metal selenide clusters with two different transition metals. The compounds represent the first Ag–Zn/Mn–Sn–Se based quaternary anionic frameworks. The optical studies show that the band gaps for 1 and 2 are 2.09 eV and 1.71 eV, respectively. Moreover, the photoelectrochemical study indicates that compound 1 displays n-type semiconducting behaviour and is photoactive under visible light illumination (λ>400 nm). - Graphical abstract: Two 3D framework selenides, [M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}] (M=Zn (1), Mn (2)), constructed from quaternary metal selenide clusters, have been solvothermally synthesized and are photoactive under visible light illumination. - Highlights: • Two new three-dimensional selenide frameworks. • Quaternary metal selenide clusters with two different transition metals. • Photoelectrochemical study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two Co-zeolite imidazolate frameworks with different topologies for degradation of organic dyes via peroxymonosulfate activation

In this paper, two novel zeolitic imidazole framework (ZIF) materials, ZIF-9 and ZIF-12 were firstly introduced as catalysts to activate PMS for Rhodamine B degradation. ZIF-9 and ZIF-12 have the same composition in metal ions (Co{sup 2+}) and organic linker, but show different structural topologies (SOD and RHO, respectively) and particle size. The two ZIFs were successfully synthesized and characterized via SEM and PXRD. Both ZIF-9 and ZIF-12 as the PMS activation catalysts were evaluated and compared, and the underlying mechanism was proposed. The nanoscale nature enables ZIF-9 a closer contact with PMS, which leading to degradation rate ZIF-9 > ZIF-12 at the time of 5 min (54.8% and 27.7%, respectively). And the degradation of ZIF-12 gradually caught up with ZIF-9 when the reaction time was longer, which can be attributed to the RHO topology and larger cage size of ZIF-12. The efficient degradation of RhB indicates that ZIF-9 and ZIF-12 can be promising heterogeneous catalyst to activate PMS for the degradation of RhB. - Graphical abstract: Two novel zeolitic imidazole framework (ZIF) materials, ZIF-9 and ZIF-12 were firstly introduced as catalysts to activate PMS for Rhodamine B degradation. ZIF-9 and ZIF-12 have the same composition in metal ions (Co{sup 2+}) and organic linker, but show different structural topologies (SOD and RHO, respectively) and particle size. The efficient degradation of RhB indicates that ZIF-9 and ZIF-12 can be promising heterogeneous catalyst to activate PMS for the degradation of RhB. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Four different dimensional Zn(II) coordination polymers as fluorescent sensor for detecting Hg{sup 2+}, Cr{sub 2}O{sub 7}{sup 2-} in aqueous solution

Highlights: • Four Zn-based coordination polymers were solvethermally synthesized. • Compound 1 and 2 could mutual conversion between different solvent ratios. • Both 1 and 2 exhibit high selectivity for Cr{sub 2}O{sub 7}{sup 2-} and Hg{sup 2+} ions in aqueous solution. • The mechanism of sensing properties were discussed in details. - Abstract: Four Zn(II) coordination polymers (CPs), [Zn(4-pzpt){sub 2}(H{sub 2}O)]{sub n} (1), {[Zn(4-pzpt)_2]·CH_3OH}{sub n} (2), [Zn{sub 2}(4-pzpt){sub 2}(suc)(H{sub 2}O)]{sub n} (3) and [Zn{sub 2}(4-pzpt){sub 2}(ndc)]{sub n} (4) were obtained from 3-(pyridin-4-yl)-5-(pyrazin-2-yl)-1H-1,2,4-triazole (4-Hpzpt), 1,4-Naphthalenedicarboxylic acid (H{sub 2}ndc) and succinic acid (H{sub 2}suc) ligands. Structural analysis reveals that 1 represents a five coordinated 0D structure. 2 possess a network featuring 2D 4{sup 4} grid-like layers structure. 3 displays a network featuring 2D (6{sup 3})-hcb layered structure. 4 shows a rare 3D (4,4)-connected topology with a Schläfli symbol of (4.6{sup 4.}7){sub 2}(6{sup 4.}7{sup 2}). Complexes 1 and 2 can mutual conversion between different solvent ratios. Luminescence properties reveal that 1 and 2 exhibit excellent selectivity for Hg{sup 2+} and Cr{sub 2}O{sub 7}{sup 2-} ions in aqueous solution, in which suggests that 1 and 2 is a promising multifunctional sensing materials. The possible sensing mechanism is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Different binding modes of Cu and Pb vs. Cd, Ni, and Zn with the trihydroxamate siderophore desferrioxamine B at seawater ionic strength

The solution speciation in seawater of divalent trace metals (Cd, Cu, Ni, Pb, Zn) is dominated by strong, ostensibly metal-specific organic ligands that may play important roles in microbial metal acquisition and/or detoxification processes. We compare the effective stabilities of these metal-organic complexes to the stabilities of their complexes with a model siderophore, desferrioxamine B (DFOB). While metal-DFOB complexation has been studied in various dilute but often moderately coordinating media, for the purpose of this investigation we measured the stability constants in a non-coordinating background electrolyte at seawater ionic strength (0.7 M NaClO4). Potentiometric titrations of single metals (M) were performed in the presence of ligand (L) at different M:L molar ratios, whereupon the stability constants of multiple complexes were simultaneously determined by non-linear regression of the titration curves with FITEQL, using the optimal binding mode for each metal. Cadmium, Ni, and Zn, like trivalent Fe, sequentially form a bi-, tetra-, and hexadentate complex with DFOB as pH increases, consistent with their coordination number of 6 and regular octahedral geometry. Copper has a Jahn-Teller-distorted square-bipyramidal geometry whereas the geometry of Pb is cryptic, involving a range of bond lengths. Supported by a thermodynamic argument, our data suggest that this impedes binding of the third hydroxamate group and that the hexadentate Cu-DFOB and Pb-DFOB complex identified in earlier reports may instead be a deprotonated tetradentate complex. Absence of the hexadentate complex promotes the formation of a dinuclear (bidentate-tetradentate) complex, M2HL2+, albeit not for Pb in 0.7 M NaCl, evidently due to extensive complexation with chloride. Stabilities of the hexadentate Ni-DFOB, Zn-DFOB, and the tetradentate Pb-DFOB complex are nearly equal, yet about 2 orders of magnitude higher and 4 orders of magnitude lower than those of the hexadentate Cd-DFOB and tetradentate Cu-DFOB complex, respectively. Linear free-energy relations defined by the rare earth elements are able to predict stabilities of the Cd, Zn, and one of the Pb complexes, but underestimate those of the Ni and Cu complexes. The comparison with metal-specific organic ligands detected in seawater yields fair agreement for three of the five metals, implying that they could be siderophore-like. The Cd- and Ni-specific ligands are much stronger and may contain quite different functional groups. Calculations with MINEQL incorporating our new stability constants indicate that very high DFOB concentrations would be required to match the extent of metal-organic complexation observed in seawater, however DFOB may well represent a much broader class of structurally related ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural characterization and dry sliding wear resistance of MoO{sub 2}-strengthened {gamma}/NiMo alloys with different primary phases

Two {gamma}/NiMo alloys strengthened by a refractory metal oxide MoO{sub 2} phase were fabricated by a laser melting deposition process. Microstructural transformation of the alloys with different primary phases was identified and the crystal structure of the primary phases was confirmed by both X-ray diffraction and transmission electron microscopy. Meanwhile, room-temperature dry sliding wear behavior and mechanism difference of the alloys were also investigated mainly by scanning electron microscopy. Microstructures of the alloys varied from hypoeutectic to hypereutectic, as the molybdenum content increases. The hypoeutectic alloy was solidified on the basis of a Ni-base solid solution {gamma} primary phase, whereas the hypereutectic alloy was grown based on an intermetallic compound with NiMo primary phase. The {gamma}, NiMo primary phases and MoO{sub 2} strengthening phase were confirmed to have face-centered cubic, orthorhombic and monoclinic structures, respectively. Compared with the hypoeutectic alloy, the hypereutectic alloy exhibited higher wear resistance under the same condition. The predominant wear mechanism of the {gamma}/NiMo alloys transformed from micro-cutting to microcracking.

36 MATERIALS SCIENCE↗

Microstructural characterization of high-manganese austenitic steels with different stacking fault energies

Microstructures of tensile-deformed high-manganese austenitic steels exhibiting twinning-induced plasticity were analyzed by electron backscatter diffraction pattern observation and X-ray diffraction measurement to examine the influence of differences in their stacking fault energies on twinning activity during deformation. The steel specimen with the low stacking fault energy of 15 mJ/m{sup 2} had a microstructure with a high population of mechanical twins than the steel specimen with the high stacking fault energy (25 mJ/m{sup 2}). The <111> and <100> fibers developed along the tensile axis, and mechanical twinning occurred preferentially in the <111> fiber. The Schmid factors for slip and twinning deformations can explain the origin of higher twinning activity in the <111> fiber. However, the high stacking fault energy suppresses the twinning activity even in the <111> fiber. A line profile analysis based on the X-ray diffraction data revealed the relationship between the characteristics of the deformed microstructures and the stacking fault energies of the steel specimens. Although the variation in dislocation density with the tensile deformation is not affected by the stacking fault energies, the effect of the stacking fault energies on the crystallite size refinement becomes significant with a decrease in the stacking fault energies. Moreover, the stacking fault probability, which was estimated from a peak-shift analysis of the 111 and 200 diffractions, was high for the specimen with low stacking fault energy. Regardless of the difference in the stacking fault energies of the steel specimens, the refined crystallite size has a certain correlation with the stacking fault probability, indicating that whether the deformation-induced crystallite-size refinement occurs depends directly on the stacking fault probability rather than on the stacking fault energies in the present steel specimens. - Highlights: {yields} We studied effects of stacking fault energies on deformed microstructures of steels. {yields} Correlations between texture and occurrence of mechanical twinning are discussed. {yields} Evolutions of dislocations and crystallite are analyzed by line profile analysis.

36 MATERIALS SCIENCE↗

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanopowders: Synthesis of different powders structures and real magnetic properties of nanomanganites

The difference in the magnetic properties between two lanthanum manganite nanopowders with identical phase and chemical composition is discussed in terms of the influence of nanopowder synthesis conditions on their properties. The aim of this investigation was to show the influence of precursor type and structure on the structure and properties of final La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanopowders obtained by precipitation technique. The forming of a complex structure of precursor materials during drying and inheritance at firing stage led to the formation of bimodal particle size distribution and magnetic properties typical of coarse powders. The correct choice of precursor material and the technological conditions of the drying and firing stage were allowed for the creation of a uniform powder structure with special magnetic properties. We showed that the magnetic properties of nanopowders were not always determined by chemical or phase composition and mean particle size of synthesized powders. The difference in precipitation process can lead to unpredictable and catastrophic results, and masked the effect of nanoparticles on the magnetic properties of the material. - Highlights: • Precursor’s structure has a strong influence on LSM nanoparticles structure. • Amorphous precursor structure led to uniform LSM nanoparticles formation. • Crystal precursors led to the formation of bimodal LSM particles distribution. • Decrease the single-domain LSM NP size led to decrease the powder’s magnetization.

36 MATERIALS SCIENCE↗

Evolution of microstructural defects with strain effects in germanium nanocrystals synthesized at different annealing temperatures

Ge nanocrystals (Ge-ncs) were produced by implantation of {sup 74}Ge{sup +} into a SiO{sub 2} film on (100) Si, followed by high-temperature annealing from 700 °C to 1100 °C. Transmission electron microscopy (TEM) studies show that the average size of Ge-ncs increases with the annealing temperature. High-resolution TEM (HRTEM) investigations reveal the presence of planar and linear defects in the formed Ge-ncs, whose relative concentrations are determined at each annealing temperature. The relative concentration of planar defects is almost independent of the annealing temperature up to 1000 °C. However, from 1000 °C to 1100 °C, its concentration decreases dramatically. For the linear defects, their concentration varies considerably with the annealing temperatures. In addition, by measuring the interplanar spacing of Ge-ncs from the HRTEM images, a strong correlation is found between the dislocation percentage and the stress field intensity. Our results provide fundamental insights regarding both the presence of microstructural defects and the origin of the residual stress field within Ge-ncs, which can shed light on the fabrication of Ge-ncs with quantified crystallinity and appropriate size for the advanced Ge-nc devices. - Highlights: • Growth of Ge nanocrystals at different annealing temperatures was investigated. • Strain field has great effects on the formation of dislocations. • Different mechanisms are proposed to explain growth regimes of Ge nanocrystals.

36 MATERIALS SCIENCE↗

Microstructural, mechanical and electrochemical behaviour of a 7017 Al–Zn–Mg alloy of different tempers

The aim of the investigation is to assess the microstructural features and associated physical, mechanical and electrochemical properties of a 7017 Al–Zn–Mg alloy of various tempers. A 7017 Al–Zn–Mg alloy was subjected to different ageing schedules to produce under-(T4), peak-(T6), over-(T7) and highly over-aged tempers. Optical microscopy, hardness measurement, electrical conductivity measurement, tensile testing and SEM fractographs, differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and electrochemical polarization studies have been used to characterize the alloy tempers. Hardness measurement and tensile testing showed the characteristic age hardening phenomenon of aluminium alloys. Optical and TEM micrographs have revealed the variation in size of matrix strengthening η′ (MgZn{sub 2}) and also the size and distribution of grain boundary η (MgZn{sub 2}) precipitate with ageing time. DSC thermograms exhibiting exothermic and endothermic peaks indicated the characteristic solid state reaction sequence of the 7017 alloy. Potentiodynamic polarization study of the 7017 alloy of various tempers in 3.5 wt.% NaCl solution at near neutral pH showed typical active metal dissolution behaviour, but at pH 12 an active–passive–transpassive transition behaviour has been observed. - Graphical abstract: TEM micrograph of the 7017 aluminium alloy of various tempers (a, b) under aged (T4), (c, d) peak aged (T6), (e, f) over aged (T7) and (g, h) highly over-aged. Display Omitted - Highlights: • 7017 Al-Zn-Mg alloy was subjected to different artificial ageing treatments. • Characterization of 7017 alloy tempers by hardness, tensile, DSC, TEM and electrochemical behaviour. • Structure-properties relationship of the 7017 Al-Zn-Mg alloy of various tempers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The evolution with strain of the stored energy in different texture components of cold-rolled IF steel revealed by high resolution X-ray diffraction

During the deformation of low carbon steel by cold-rolling, dislocations are created and stored in grains depending on local crystallographic orientation, deformation, and deformation gradient. Orientation dependent dislocation densities have been estimated from the broadening of X-ray diffraction lines measured on a synchrotron beamline. Different cold-rolling levels (from 30% to 95% thickness reduction) have been considered. It is shown that the present measurements are consistent with the hypothesis of the sole consideration of screw dislocations for the analysis of the data. The presented evolutions show that the dislocation density first increases within the α fiber (=(hkl)<110>) and then within the γ fiber (=(111) ). A comparison with EBSD measurements is done and confirms that the storage of dislocations during the deformation process is orientation dependent and that this dependence is correlated to the cold-rolling level. If we assume that this dislocation density acts as a driving force during recrystallization, these observations can explain the fact that the recrystallization mechanisms are generally different after moderate or large strains. - Highlights: • Dislocation densities are assessed by XRD in main texture components of a steel sheet. • Dislocation densities vary with both strain and texture components. • The analysis relies on the sole presence of screw dislocations. • The measured dislocation densities include the contribution of both SSD and GND.

36 MATERIALS SCIENCE↗

Electrochemical characterization for lithium vanadium phosphate with different calcination temperatures prepared by the sol–gel method

Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C (LVP/C) composite materials were synthesized via a sol–gel method with oxalic acid as the chelating agent and polyethylene glycol (PEG) as the supplementary carbon source. The oxalic acid and PEG serve as double carbon sources. This study focused on the effect of different calcination temperatures on the electrochemical properties of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}. The diffraction peaks for all of the samples are well indexed to monoclinic Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} with a P2{sub 1}/n space group. The TGA data indicate that the residual carbon content of LVP/C-700 is the highest (i.e., 2.31 wt.%), and as the calcination temperature increased, the residual carbon content of the material gradually decreased. SEM and TEM analyses indicated that the LVP particles that were calcined at 700 °C exhibit a uniform particle size distribution and the carbon coating exhibited a complete and orderly moderate thickness. The LVP/C-700 material exhibits the best electrochemical performance in the voltage range of 3.0 to 4.3 V and 0.1 C where the initial discharge capacity can reach 128.98 mAh g{sup −} {sup 1}. Even after 200 cycles, the discharge capacity was 119.31 mAh g{sup −} {sup 1}, and the capacity retention rate was 92.49%. - Highlights: • Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite materials have been synthesized via a sol–gel method with double carbon sources. • The different calcination temperatures affect the grain growth and crystallinity of the Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C materials. • The LVP/C-700 material exhibites the largest lithium ion diffusivity and electronic conductivity.

36 MATERIALS SCIENCE↗

Microstructural changes and strain hardening effects in abrasive contacts at different relative velocities and temperatures

Strain hardening is commonly used to reach the full potential of materials and can be beneficial in tribological contacts. 2-body abrasive wear was simulated in a scratch test, aimed at strain hardening effects in various steels. Different working conditions were examined at various temperatures and velocities. Strain hardening effects and microstructural changes were analysed with high resolution scanning electron microscopy (HRSEM), electron backscatter diffraction (EBSD), micro hardness measurements and nanoindentation. Statistical analysing was performed quantifying the influence of different parameters on microstructures. Results show a crucial influence of temperature and velocity on the strain hardening in tribological contacts. Increased velocity leads to higher deformed microstructures and higher increased surface hardness at a lower depth of the deformed zones at all materials investigated. An optimised surface hardness can be achieved knowing the influence of velocity (strain rate) and temperature for a “tailor-made” surface hardening in tribological systems aimed at increased wear resistance. - Highlights: •Hardening mechanisms and their intensity in tribological contacts are dependent on relative velocity and temperature. •Beneficial surface hardened zones are formed at certain running-in conditions; the scientific background is presented here. •Ferritic-pearlitic steels strain hardens via grain size reduction and decreasing interlamellar distances in pearlite. •Austenitic steels show excellent surface hardening (120% hardness increase) by twinning and martensitic transformation. •Ferritic steels with hard phases harden in the ferrite phase as per Hall-Petch equation and degree of deformation.

36 MATERIALS SCIENCE↗