Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

One hundred anode microchannel plate ion detector

A one-hundred-anode microchannel plate detector is constructed on a 10 cm x 15 cm printed circuit board and attached to a homebuilt matrix assisted laser desorption ionization (MALDI) time-of-flight mass spectrometer. Ringing and cross talk between anodes have been successfully eliminated and preliminary mass spectra of peptide ions recorded. With one hundred anodes on the printed circuit board, spatial information about the ion beam can also be readily determined with this detector. During operation, the detector anode assembly loses sensitivity after ions strike it for a considerable period of time due to charging of the non-conductive regions between anodes. However, this effect can be minimized by deflecting matrix ions away from the detector.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optoelectronic properties of Mg{sub 2}Si semiconducting layers with high absorption coefficients

In an attempt to develop a low-cost material for solar cell devices, polycrystalline magnesium silicide (poly-Mg{sub 2}Si) semiconducting layers have been prepared by applying rf magnetron sputtering using a Mg{sub 2}Si target. The optimum substrate temperature for the poly-Mg{sub 2}Si growth was found to be T{sub s} = 200 deg. C; the film deposition at higher temperatures leads to desorption of Mg atoms from the growing surface, while the amorphous phase formation occurs at room temperature. The poly-Mg{sub 2}Si layer deposited at T{sub s} = 200 deg. C shows the (111) preferential orientation with a uniform grain size of {approx}50 nm. The dielectric function of the poly-Mg{sub 2}Si layer has been determined accurately by spectroscopic ellipsometry. From the analysis, quite high absorption coefficients and an indirect gap of 0.77 eV in the poly-Mg{sub 2}Si layer have been confirmed. The above poly-Mg{sub 2}Si layer shows clear photoconductivity and can be applied as a narrow-gap bottom layer in multi-junction solar cell devices.

36 MATERIALS SCIENCE↗

LH launcher Arcs Formation and Detection on JET

Mechanisms of arc formation have been analyzed and the critical electric fields for the multipactor effect calculated, compared to the experimental values and found to be within the normal operational space of the LH system on JET. It has been shown that the characteristic electron energy (20-1000)eV for the highest multipactor resonances (N = 4-9) are within the limits of secondary electron yield above 1 required for multipactoring. Electrons with these energies provide the highest gas desorption efficiency when hitting the waveguide walls. The effect of higher waveguide modes and magnetic field on the multipactor was also considered. The distribution function for electrons accelerated by LH waves in front of the launcher has been calculated. The field emission currents have been estimated and found to be small. It is proposed that emission of Fel5, 16 lines, which can be obtained with improved diagnostics, could be used to detect arcs that are missed by a protection system based on the reflected power. The reliability and time response of these signals are discussed. A similar technique based on the observation of the emission of low ionized atoms can be used for a fast detection of other undesirable events to avoid sputtering or melting of the plasma facing components such as RF antenna. These techniques are especially powerful if they are based on emission uniquely associated with specific locations and components.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Altering the sulfur content in the propanethiol plasma polymers using the capacitive-to-inductive mode transition in inductively coupled plasma discharge

The effect of the transition from capacitive (E) to inductive (H) mode on propanethiol plasma polymer films properties was investigated by optical emission as well as by x-ray photoelectron spectroscopy. The E mode is characterized by low deposition rate and by high sulfur content in the films ({approx}40% vs {approx}20% in H mode). After aging, a strong decrease of sulfur to carbon content (from {approx}0.75 to 0.13), attributed to desorption of unbounded sulfur-based molecules (e.g., H{sub 2}S), is detected at low power in E mode. The importance of the E-H transition for altering the film properties is highlighted.

36 MATERIALS SCIENCE↗

The influence of Mg doping on the nucleation of self-induced GaN nanowires

GaN nanowires were grown without any catalyst by plasma-assisted molecular beam epitaxy. Under supply of Mg, nanowire nucleation is faster, the areal density of wires increases to a higher value, and nanowire coalescence is more pronounced than without Mg. During nanowire nucleation the Ga desorption was monitored in-situ by line-of-sight quadrupole mass spectrometry for various substrate temperatures. Nucleation energies of 4.0{+-}0.3 eV and 3.2{+-}0.3 eV without and with Mg supply were deduced, respectively. This effect has to be taken into account for the fabrication of nanowire devices and could be employed to tune the NW areal density.

36 MATERIALS SCIENCE↗

SHI induced enhancement in conductivity of PbTe thin film for thermoelectric applications

PbTe thin film were synthesized using thermal evaporation and irradiated by 100 MeV Ag ions at different fluences ranging from 3x10{sup 13} and 1x10{sup 14} ions/cm{sup 2}. Pristine films annealed under Ar atm at 250 deg. C for 1 hr. X-ray Diffraction (XRD) of pristine and irradiated films reveals the improvement of PbTe phase with increasing fluence. The thickness of the film is decreased from 195 nm to 150 nm after ion irradiation as indicated by Rutherford backscattering spectrometry (RBS) analysis due to the sputtering. Resistivity measurement using four probe techniques of these films shows the conductivity enhancement with ion fluence. The conductivity is found to be {approx} 6 fold at fluence 3x10{sup 13} ions/cm{sup 2} whereas it decreases to 3 fold after annealing in comparison to pristine sample. On further increasing the fluence from 3x10{sup 13} ions/cm{sup 2}, the properties of the film begin to deteriorate. SHI induced modification may be explained on the basis of oxygen desorption and change in stochiometry of film during irradiation.

36 MATERIALS SCIENCE↗

Materials analysis and particle probe: A compact diagnostic system for in situ analysis of plasma-facing components (invited)

The objective of the materials analysis particle probe (MAPP) in NSTX is to enable prompt and direct analysis of plasma-facing components exposed to plasma discharges. MAPP allows multiple samples to be introduced to the level of the plasma-facing surface without breaking vacuum and analyzed using X-ray photoelectron spectroscopy (XPS), ion-scattering and direct recoil spectroscopy, and thermal desorption spectroscopy (TDS) immediately following the plasma discharge. MAPP is designed to operate as a diagnostic within the {approx}12 min NSTX minimum between-shot time window to reveal fundamental plasma-surface interactions. Initial calibration demonstrates MAPP's XPS and TDS capabilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Application of hydrogenation to low-temperature cleaning of the Si(001) surface in the processes of molecular-beam epitaxy: Investigation by scanning tunneling microscopy, reflected high-energy electron diffraction, and high resolution transmission electron microscopy

Structural properties of the clean Si(001) surface obtained as a result of low-temperature (470-650 Degree-Sign C) pre-growth annealings of silicon wafers in a molecular-beam epitaxy chamber have been investigated. To decrease the cleaning temperature, a silicon surface was hydrogenated in the process of a preliminary chemical treatment in HF and NH{sub 4}F aqueous solutions. It has been shown that smooth surfaces composed of wide terraces separated by monoatomic steps can be obtained by dehydrogenation at the temperatures Greater-Than-Or-Equivalent-To 600 Degree-Sign C, whereas clean surfaces obtained at the temperatures <600 Degree-Sign C are rough. It has been found that there exists a dependence of structural properties of clean surfaces on the temperature of hydrogen thermal desorption and the process of the preliminary chemical treatment. The frequency of detachment/attachment of Si dimers from/to the steps and effect of the Ehrlich-Schwoebel barrier on ad-dimer migration across steps have been found to be the most probable factors determining a degree of the resultant surface roughness.

36 MATERIALS SCIENCE↗

Electronically induced surface reactions: Evolution, concepts, and perspectives

This is a personal account of the development of the title subject which is the broader field encompassing surface photochemistry. It describes the early times when the main interest centered on desorption induced by slow electrons, follows its evolution in experiment (use of synchrotron radiation and connections to electron spectroscopies; use of lasers) and mechanisms, and briefly mentions the many different subfields that have evolved. It discusses some practically important aspects and applications and ends with an account of an evolving new subfield, the application to photochemistry on nanoparticles.

36 MATERIALS SCIENCE↗

Controlling the doping of single-walled carbon nanotube networks by proton irradiation

We demonstrate the controlled desorption of adventitious dopants on networks of single-walled carbon nanotubes (SWNTs) with 100 keV proton irradiation. Networks of sorted metallic, semiconducting SWNTs, and unsorted SWNTs were investigated. The removal of dopants was indicated by an increase in sheet resistances along with an increase in the absorption of the low energy absorption band of semiconducting SWNTs. Semiconducting and unsorted SWNT networks exhibited the largest change in their sheet resistance, which indicates the conductivity of unsorted SWNT networks is dominated by the tube-tube junctions of semiconducting SWNTs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The influence of potassium on the growth of ultra-thin films of para-hexaphenyl on muscovite mica(001)

The interaction of potassium with mica(001) and its influence on the subsequent film growth of para-hexaphenyl (6P) was studied by Auger electron spectroscopy, thermal desorption spectroscopy, and atomic force microscopy (AFM). Freshly cleaved mica is covered with 0.5 monolayer (ML) of potassium. By intentional potassium deposition in ultra-high vacuum a saturation of 1 ML can be achieved, which is stable up to 1000 K. Additional potassium desorbs at around 350 K. The film morphology of 6P on mica(001) is significantly influenced by the potassium monolayer. On the freshly cleaved mica surface, which contains 1/2 ML of K, 6P forms needle-like islands which are composed of lying molecules. On the fully potassium covered mica surface 6P grows in form of dendritic islands, composed of standing molecules. The reason for this change is attributed to the removal of lateral electric fields which exist on the freshly cleaved mica surface, due to the specific arrangements of the atoms in the surface near region of mica.

36 MATERIALS SCIENCE↗

Ge/SrTiO{sub 3}(001): Correlation between interface chemistry and crystallographic orientation

In this work, the desorption of a submonolayer deposit of Ge on SrTiO{sub 3}(001) is studied by reflection high energy electron diffraction. The results are compared to those of a previous experiment done using soft x-ray photoelectron spectroscopy. Combining these techniques allows for correlating interface chemistry and crystal orientation, and for bringing clarifying elements concerning the competition between (111) and (001) crystal orientation typical for the semiconductor/perovskite epitaxial systems. Despite poor interface matching, (111)-oriented islands are stabilized at the expense of (001)-oriented islands due to the relatively low energy of their free facets. Such 'surface energy driven' crystallographic orientation of the deposit is enhanced by the low adhesion energy characteristic of the Ge/SrTiO{sub 3} system.

36 MATERIALS SCIENCE↗

Effects of laser irradiation on the self-assembly of MnAs nanoparticles in a GaAs matrix

We investigate the effects of laser irradiation on the self-assembly of MnAs nanoparticles during solid-phase decomposition in a GaAs matrix. It is found that laser irradiation suppresses the growth of MnAs nanoparticles from small to large size, and that the median diameter D{sub 1} in the size distribution of small MnAs nanoparticles depends on the incident photon energy E following D{sub 1} {approx} E{sup -1/5}. We explain this behavior by the desorption of Mn atoms on the MnAs nanoparticle surface due to resonant optical absorption, in which incident photons excite intersubband electronic transitions between the quantized energy levels in the MnAs nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Metal etching with reactive gas cluster ion beams using pickup cell

Mixed gas cluster ion beams were formed using pickup cell for metal etching. O{sub 2} neutral clusters pick up acetic acid and formed mixed cluster beam. By using O{sub 2}-GCIB with acetic acid, enhancement of Cu etching was observed. Because of dense energy deposition by GCIB, etching of Cu proceeds by CuO formation, enhancement of chemical reaction with acetic acid and desorption of etching products. Surface roughening was not observed on poly crystalline Cu because of the small dependence of etching rate on crystal orientation. Halogen free and low-temperature metal etching with GCIB using pickup cell is possible.

36 MATERIALS SCIENCE↗

Photodissociation of methyl iodide adsorbed on low-temperature amorphous ice surfaces

Photodissociation dynamics of methyl iodide (CH{sub 3}I) adsorbed on both amorphous solid water (ASW) and porous amorphous solid water (PASW) has been investigated. The ejected ground-state I({sup 2}P{sub 3/2}) and excited-state I({sup 2}P{sub 1/2}) photofragments produced by 260- and 290-nm photons were detected using laser resonance-enhanced multiphoton ionization. In contrast to gas-phase photodissociation, (i) the I({sup 2}P{sub 3/2}) photofragment is favored compared to I({sup 2}P{sub 1/2}) at both wavelengths, (ii) I({sup 2}P{sub 3/2}) and I({sup 2}P{sub 1/2}) have velocity distributions that depend upon ice morphology, and (iii) I{sub 2} is produced on ASW. The total iodine [I({sup 2}P{sub 3/2})+I({sup 2}P{sub 1/2})+I{sub 2}] yield varies with substrate morphology, with greater yield from ASW than PASW using both 260- and 290-nm photons. Temperature-programmed desorption studies demonstrate that ice porosity enhances the trapping of adsorbed CH{sub 3}I, while pore-free ice likely allows monomer adsorption and the formation of two-dimensional CH{sub 3}I clusters. Reactions or collisions involving these clusters, I atomic fragments, or I-containing molecular fragments at the vacuum-surface interface can result in I{sub 2} formation.

36 MATERIALS SCIENCE↗

Activation studies of NEG coatings by surface techniques

NEG (Non Evaporable Getters)materials in the form of ternary alloy coatings have many benefits compare to traditional bare surfaces such as Extreme high vacuum(XHV), lower secondary electron yield(SEY), low photon desorption cofficient. The extreme high vacuum (pressure > 10{sup -10} mbar) is very useful to the study of surfaces of the material, for high energy particle accelerators(LHC, Photon Factories), synchrotrons (ESRF, Ellectra) etc. Low secondary electron yield leads to better beam life time. In LHC the pressure in the interaction region of the two beams is something of the order of 10{sup -12} mbar. In this paper preparation of the coatings and their characterization to get the Activation temperature by using the surface techniques XPS, SEM and SIMS has been shown.

36 MATERIALS SCIENCE↗

A compact ion source and accelerator based on a piezoelectric driver

Compact ion sources and accelerators using piezoelectric devices for the production of energetic ion beams are being evaluated. A coupled source-accelerator is being tested as a neutron source to be incorporated into oil-well logging diagnostics. Two different ion sources are being investigated, including a piezoelectric transformer-based plasma source and a silicon-based field ion source. The piezoelectric transformer plasma ion source uses a cylindrical, resonantly driven piezoelectric crystal to produce high voltage inside a confined volume filled with low pressure deuterium gas. The plasma generated in the confined chamber is ejected through a small aperture into an evacuated drift region. The silicon field ion source uses localized electric field enhancement produced by an array of sharp emitters etched into a silicon blank to produce ions through field desorption ionization. A second piezoelectric device of a different design is used to generate an accelerating potential on the order of 130 kV; this potential is applied to a deuterated target plate positioned perpendicular to the ion stream produced by either plasma source. This paper discusses the results obtained by the individual components as they relate to the final neutron source.

07 ISOTOPE AND RADIATION SOURCES↗

Tuning the work function of graphene by ultraviolet irradiation

Graphene layers grown by chemical vapor deposition were, respectively, irradiated for 0, 20, 40, and 60 min by an ultraviolet light source in order to experimentally study the change in the work function of graphene. The dependences of the work function and carrier concentration upon ultraviolet irradiation have been found. It is shown that ultraviolet irradiation may lead to oxygen desorption, thus reducing the hole density and work function of graphene. Based on the well-known expression for the Fermi energy of Dirac fermions, the Fermi velocity of graphene was extracted to be about 5.2 Multiplication-Sign 10{sup 5} m/s.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗