Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Particle flow within a transonic compressor rotor passage with application to laser-Doppler velocimetry

A theoretical analysis was conducted of the dynamic behavior of micron size particles moving in the three-dimensional flow field of a rotating transonic axial-flow air compressor rotor. The particle velocity lag and angular deviation relative to the gas were determined as functions of particle diameter, mass density and radial position. Particle size and density were varied over ranges selected to correspond to typical laser-Doppler velocimeter (LDV) flow field mapping applications. It was found that the particles move essentially on gas stream surfaces and that particle tracking is relatively insensitive to the rotor radial coordinate. Velocity lag and angular deviation increased whenever particle size or mass density increased, and particle tracking was more sensitive to a change in particle diameter than to a corresponding change in mass density. Results indicated that velocity and angular deviations generally less than 1 percent and 1 degree could be achieved with 1 gm/cc tracer particles with diameters of 1 micron or less.

Maxwell, B. R.↗

Dislocation density in fine grain-size spark-plasma sintered aluminum measured using high brightness synchrotron radiation

In this study, three-dimensional orientation mapping of samples of aluminum prepared by spark plasma sintering (SPS) with average grain sizes of 5 μm and 1 μm has been carried out using high-brightness synchrotron radiation, from which the geometrically necessary dislocation (GND) density has been determined. The low average measured GND density values confirm that the SPS process can be used to produce samples containing grains with dislocation density similar to that of fully recrystallized coarse-grained samples. Values of GND density are also compared to those obtained from electron back-scatter diffraction studies on the same material, highlighting the significantly higher angular resolution of the synchrotron data. For the 5 μm grain-size sample the measured GND density can account for a large fraction of the previously observed positive Hall-Petch deviation of this material. For the 1 μm grain-size sample, however, the GND-based strengthening contribution is much smaller than the reported positive Hall-Petch deviation, such that the additional strength may be reliably associated with dislocation source-limited strengthening.

36 MATERIALS SCIENCE↗

Metrics for comparison of crystallographic maps

Numerical comparison of crystallographic contour maps is used extensively in structure solution and model refinement, analysis and validation. However, traditional metrics such as the map correlation coefficient (map CC, real-space CC or RSCC) sometimes contradict the results of visual assessment of the corresponding maps. This article explains such apparent contradictions and suggests new metrics and tools to compare crystallographic contour maps. The key to the new methods is rank scaling of the Fourier syntheses. The new metrics are complementary to the usual map CC and can be more helpful in map comparison, in particular when only some of their aspects, such as regions of high density, are of interest.

36 MATERIALS SCIENCE↗

HOW GALACTIC ENVIRONMENT REGULATES STAR FORMATION

In a new simple model I reconcile two contradictory views on the factors that determine the rate at which molecular clouds form stars—internal structure versus external, environmental influences—providing a unified picture for the regulation of star formation in galaxies. In the presence of external pressure, the pressure gradient set up within a self-gravitating turbulent (isothermal) cloud leads to a non-uniform density distribution. Thus the local environment of a cloud influences its internal structure. In the simple equilibrium model, the fraction of gas at high density in the cloud interior is determined simply by the cloud surface density, which is itself inherited from the pressure in the immediate surroundings. This idea is tested using measurements of the properties of local clouds, which are found to show remarkable agreement with the simple equilibrium model. The model also naturally predicts the star formation relation observed on cloud scales and at the same time provides a mapping between this relation and the closer-to-linear molecular star formation relation measured on larger scales in galaxies. The key is that pressure regulates not only the molecular content of the ISM but also the cloud surface density. I provide a straightforward prescription for the pressure regulation of star formation that can be directly implemented in numerical models. Predictions for the dense gas fraction and star formation efficiency measured on large-scales within galaxies are also presented, establishing the basis for a new picture of star formation regulated by galactic environment.

79 ASTRONOMY AND ASTROPHYSICS↗

The application of MAMMOTH for a detailed tightly coupled fuel pin simulation with a station blackout

The accurate calculation of desired quantities to predict fuel behavior in a nuclear reactor requires the solution of inter linked equations representing different physics phenomena. Traditional fuels performance codes often rely on internal empirical models for the pin power density and a simplified boundary condition on the cladding outer surface. These simplifications are performed because of the difficulty of coupling applications or codes on differing domains and mapping the required data. In this work the MAMMOTH application is employed in the demonstration of an approach that more consistent with first principles, in a simulation that couples the neutronics application Rattlesnake, the thermal fluids application RELAP-7 and the fuels performance application BISON. A single fuel pin was modeled based on the dimensions of a fuel rod from a Westinghouse 17*17 optimized PWR fuel assembly. The simulation consisted of a depletion period of 1343 days, representing three full operating cycles, followed by a station blackout (SBO) event. The fuel rod was depleted with a total pin power of 65.81 kW. After 1343 days the fission power was reduced to zero (simulating a reactor shutdown). Decay heat calculations provided the time-varying energy source after this time. For this problem, Rattlesnake, BISON, and RELAP-7 are coupled under MAMMOTH in a tightly coupled approach. Each system solves its physics on a separate mesh and, for RELAP-7 and BISON, on only a subset of the full problem domain. Rattlesnake solves the neutronics over the whole domain, which includes the fuel, cladding, gaps, water, and top and bottom rod holders. Here BISON is applied to the fuel and cladding with a 2-D axisymmetric domain, and RELAP-7 is applied to the flow of the circular outer water channel with a set of 1-D flow equations. For this work, the mesh on the Rattlesnake side is either be 3-D (for low order PN transport or diffusion) or 2-D axisymmetric (for diffusion). BISON has a matching ring structure mesh for the fuel so both the power density and local burnup are transferred accurately from Rattlesnake. At each depletion time step, Rattlesnake calculates a power density, fission density rate, burnup distribution and fast flux based on the current water density and fuel temperature. These are then mapped to the BISON mesh to perform a fuels performance solution. BISON calculates the fuel temperature and cladding surface temperature based upon the current power density and bulk fluid temperature. RELAP-7 then calculates the fluid temperature, water density fraction and water phase velocity based upon the cladding surface temperature. The fuel temperature and the fluid density are then passed back to Rattlesnake for another neutronics calculation. For this paper, sets of results from the detailed calculation are provided for both depletion and the SBO event. We demonstrate that a detailed simulation akin to first principles can be achieved using MAMMOTH and the various MOOSE application on differing domains. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

ERTS-1 image enhancement by optically combining density slices

The technique of density slicing using a photographic film and its application to enhancement of ERTS-1 imagery has proved to be useful for mapping varigated areal phenomena and provides a useful supplement ot the I2S MiniAddcol viewing system. The intial experiments conducted with this film were encouraging, and indicated that this technique of density slicing using readily accessible darkroom facilities and simple darkroom procedures allows rapid, accurate, and facile interpretation of certain areal phenomena to be made from the imagery. The distribution of the tree yucca, Yucca brevifolia Jaegeriana, in the eastern Mojave Desert of Southern California and southern Nevada was used as an example to test the accuracy of the technique for mapping purposes. The distribution was mapped at a relatively high level of accuracy.

Tapper, G. O.↗

Land cover stratification using Landsat Thematic Mapper data in Sahelian and Sudanian woodland and wooded grassland

A standard methodology for thematic mapping of natural vegetation using remotely sensed imagery and digital image processing was modified to account for the spatial and spectral properties of semi-arid landscapes, and tested in study areas in the Sahelian and Sudanian zones, Mali. A principal components transformation of registered wet and dry season Landsat TM images produced a set of synthetic spectral channels differentiating vegetation cover between seasons, and allowed areas with annual grass growth to be distinguished from areas with woody cover. The transformed data were statistically clustered and clusters were assigned to vegetation type and density categories. In a separate step, the images were manually interpreted to differentiate broad soil classes. Four statistics were compared to evaluate the accuracy of the maps based on sample points from air photos. For the relatively detailed categories initially defined, map accuracies were substandard; however, when vegetation density classes were aggregated, overall accuracy was around 90 percent, and class accuracy was greater than 80 percent for most classes. This method is suitable for stratification and inventory of woody biomass at a regional scale in semi-arid woodland and wooded grassland.

Franklin, J.↗

STRUCTURE AND COMPOSITION OF MOLECULAR CLOUDS WITH CN ZEEMAN DETECTIONS I: W3(OH)

We have carried out a multi-species study of a region which has had previous measurements of strong magnetic fields through the CN Zeeman effect in order to explore the relationship between CN and N{sub 2}H{sup +}, both of which have evidence that they remain in the gas phase at densities of 10{sup 5}-10{sup 6} cm{sup -3}. To achieve this, we map the 1 arcmin{sup 2} region around the UCHII region of W3(OH) using the Combined Array for Millimeter-wave Astronomy (CARMA). Approximately 105 hr of data were collected in multiple array configurations to produce maps with an effective resolution of {approx}2.''5 at high signal-to-noise ratios (S/Ns) in CN, C{sup 18}O, HCN, HCO{sup +}, N{sub 2}H{sup +}, and two continuum bands (91.2 GHz and 112 GHz). These data allow us to compare tracer molecules associated with both low- and high-density regions to infer gas properties. We determine that CARMA resolves out approximately 35% of the CN emission around W3(OH) when compared with spectra obtained from the IRAM 30 m telescope. The presence of strong absorption lines toward the continuum source in three of the molecular transitions infers the presence of a cold, dark, optically thick region in front of the continuum source. In addition, the presence of high-velocity emission lines near the continuum source shows the presence of hot clumpy emission behind the continuum source. These data determine that future high-resolution interferometric CN Zeeman measurements which cannot currently be performed (due to technical limitations of current telescopes) are feasible. We confirm that CN is indeed a good tracer for high-density regions; with certain objects such as W3(OH) it appears to be a more accurate tracer than N{sub 2}H{sup +}.

79 ASTRONOMY AND ASTROPHYSICS↗

A multi-transition study of carbon monoxide in the Orion A molecular cloud. II - C(O-18)

We present an analysis of density, temperature, and excitation conditions in a one half square degree region around BN/KL in Orion A using new C(O-l8) J = 1 yields 0 and J = 2 yields 1 data. This paper extends a previous study of Orion A, based on a multitransition analysis of (C-13)O, to the optically thinner C(O-18) species that traces better the dense inner regions of giant molecular clouds. From the C(O-18) maps we identify several condensations and are able to derive their size, linewidth, average density, mass, and virial mass.

Dutrey, A.↗

Stratigraphy of the Perrine and Nun Sulci quadrangles (Jg-2 and Jg-5), Ganymede

Dark and light terrain materials in the Perrine and Nun Sulci quadrangles are divided into nine map units, four dark, and five light. These are placed in time-stratigraphic sequence primarily by means of embayment and cross-cutting relationships. Dark terrain is generally more heavily cratered and thus older that light terrain but, at least in these quadrangles, crater densities are not reliable indicators of relative ages among the four dark material units. The four mapped material units within dark terrain are: cratered dark materials (dc), grooved dark materials (dg), transitional dark materials (di), and dark materials, undivided (d). The five mapped units within light terrain are: intermediate light materials (li), grooved light materials (lg), irregularly grooved light materials (lgl), smooth light materials (ls), and light materials, undivided.

Mcgill, George E.↗

Mappings of open quantum systems onto chain representations and Markovian embeddings

We study systems coupled linearly to a bath of oscillators. In an iterative process, the bath is transformed into a chain of oscillators with nearest neighbour interactions. A systematic procedure is provided to obtain the spectral density of the residual bath in each step, and it is shown that under general conditions these data converge. That is, the asymptotic part of the chain is universal, translation invariant with semicircular spectral density. The methods are based on orthogonal polynomials, in which we also solve the outstanding so-called “sequence of secondary measures problem” and give them a physical interpretation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonparametric study of the evolution of the cosmological equation of state with SNeIa, BAO, and high-redshift GRBs

We study the dark energy equation of state as a function of redshift in a nonparametric way, without imposing any a priori w(z) (ratio of pressure over energy density) functional form. As a check of the method, we test our scheme through the use of synthetic data sets produced from different input cosmological models that have the same relative errors and redshift distribution as the real data. Using the luminosity-time L{sub X} -T{sub a} correlation for gamma-ray burst (GRB) X-ray afterglows (the Dainotti et al. correlation), we are able to utilize GRB samples from the Swift satellite as probes of the expansion history of the universe out to z ≈ 10. Within the assumption of a flat Friedmann-Lemaître-Robertson-Walker universe and combining supernovae type Ia (SNeIa) data with baryonic acoustic oscillation constraints, the resulting maximum likelihood solutions are close to a constant w = –1. If one imposes the restriction of a constant w, we obtain w = –0.99 ± 0.06 (consistent with a cosmological constant) with the present-day Hubble constant as H {sub 0} = 70.0 ± 0.6km s{sup –1} Mpc{sup –1} and density parameter as Ω{sub Λ0} = 0.723 ± 0.025, while nonparametric w(z) solutions give us a probability map that is centered at H {sub 0} = 70.04 ± 1km s{sup –1} Mpc{sup –1} and Ω{sub Λ0} = 0.724 ± 0.03. Our chosen GRB data sample with a full correlation matrix allows us to estimate the amount, as well as quality (errors), of data needed to constrain w(z) in the redshift range extending an order of magnitude beyond the farthest SNeIa measured.

79 ASTRONOMY AND ASTROPHYSICS↗

THE MID-INFRARED EXTINCTION LAW IN THE OPHIUCHUS, PERSEUS, AND SERPENS MOLECULAR CLOUDS

We compute the mid-IR extinction law from 3.6 to 24 {mu}m in three molecular clouds-Ophiuchus, Perseus, and Serpens-by combining data from the 'Cores to Disks' Spitzer Legacy Science program with deep JHK{sub s} imaging. Using a new technique, we are able to calculate the line-of-sight (LOS) extinction law toward each background star in our fields. With these LOS measurements, we create, for the first time, maps of the {chi}{sup 2} deviation of the data from two extinction law models. Because our {chi}{sup 2} maps have the same spatial resolution as our extinction maps, we can directly observe the changing extinction law as a function of the total column density. In the Spitzer Infrared Array Camera (IRAC) bands, 3.6-8 {mu}m, we see evidence for grain growth. Below A{sub K{sub s}}= 0.5, our extinction law is well fitted by the Weingartner and Draine R{sub V} = 3.1 diffuse interstellar-medium dust model. As the extinction increases, our law gradually flattens, and for A{sub K{sub s}}{>=}1, the data are more consistent with the Weingartner and Draine R{sub V} = 5.5 model that uses larger maximum dust grain sizes. At 24 {mu}m, our extinction law is 2-4 times higher than the values predicted by theoretical dust models, but is more consistent with the observational results of Flaherty et al. Finally, from our {chi}{sup 2} maps we identify a region in Perseus where the IRAC extinction law is anomalously high considering its column density. A steeper near-IR extinction law than the one we have assumed may partially explain the IRAC extinction law in this region.

79 ASTRONOMY AND ASTROPHYSICS↗

Transforming microseismic clouds into near real-time visualization of the growing hydraulic fracture

SUMMARY Microseismic observations during unconventional reservoir stimulation are typically seen as a proxy for clusters of hydraulic fractures and the extent of the stimulated reservoir. Such straightforward interpretation is often misleading and fails to provide a physically reasonable image of the fracturing process. This paper demonstrates the application of a physics-based machine learning algorithm which enables a rapid and accurate fracture mapping from the microseismic data. Our training and validation data set relies on a history-matched geomechanical modelling workflow implemented in GEOS software for the Hydraulic Fracturing Test Site 1 (HFTS-1) project. For this study we augmented the simulated fracture growth through geostatistical modelling of induced seismicity, so that the synthetic microseismic catalogue matches the main statistical properties of the field observations. We formulated the problem of mapping the actual fracture in the clutter of events to parallel common video segmentation workflows: several past video frames (microseismic density snapshots) are passed through a deep convolutional network to classify whether a given voxel is associated with a fracture or intact rock. We found that for accurate fracture mapping, the network’s input and architecture must be augmented to incorporate the fluid injection parameters (pressure, rate, concentration of proppant, and location of the perforation within the cluster). The error rate for the network reached as little as 10 per cent of the fracture area, while a conventional microseismic interpretation approach yielded ∼300 per cent. Our approach also yields must faster predictions than conventional methods (minutes instead of weeks), and could enable engineers to make rapid decisions regarding engineering parameters (pumping rate, viscosity) in real time during stimulation.

58 GEOSCIENCES↗

PHYSICAL PROPERTIES OF THE CIRCUMNUCLEAR STARBURST RING IN THE BARRED GALAXY NGC 1097

We report high-resolution {sup 12}CO(J = 2-1), {sup 13}CO(J = 2-1), and {sup 12}CO(J = 3-2) imaging of the Seyfert 1/starburst ring galaxy NGC 1097 with the Submillimeter Array for the purpose of studying the physical and kinematic properties of the 1 kpc circumnuclear starburst ring. Individual star clusters as detected in the Hubble Space Telescope map of Pa{alpha} line emission have been used to determine the star formation rate (SFR), and are compared with the properties of the molecular gas. The molecular ring has been resolved into individual clumps at the giant molecular cloud association (GMA) scale of 200-300 pc in all three CO lines. The intersection between the dust lanes and the starburst ring, which is associated with the orbit-crowding region, is resolved into two physically/kinematically distinct features in the 1.''5 x 1.''0 (105 x 70 pc) {sup 12}CO(J = 2-1) map. The clumps associated with the dust lanes have broader line widths, higher surface gas densities, and lower SFRs, while the narrow line clumps associated with the starburst ring have opposite characteristics. A Toomre-Q value lower than unity at the radius of the ring suggests that the molecular ring is gravitationally unstable to fragmentation at GMA scale. The line widths and surface density of the gas mass of the clumps show an azimuthal variation related to the large-scale dynamics. The SFR, on the other hand, is not significantly affected by the dynamics, but has a correlation with the intensity ratio of {sup 12}CO (J = 3-2) and {sup 12}CO(J = 2-1), which traces the denser gas associated with star formation. Our resolved CO map, especially in the orbit-crowding region, observationally demonstrates for the first time that the physical/kinematic properties of GMAs are affected by the large-scale bar-potential dynamics in NGC 1097.

79 ASTRONOMY AND ASTROPHYSICS↗

Density estimation via measure transport: Outlook for applications in the biological sciences

Abstract One among several advantages of measure transport methods is that they allow or a unified framework for processing and analysis of data distributed according to a wide class of probability measures. Within this context, we present results from computational studies aimed at assessing the potential of measure transport techniques, specifically, the use of triangular transport maps, as part of a workflow intended to support research in the biological sciences. Scenarios characterized by the availability of limited amount of sample data, which are common in domains such as radiation biology, are of particular interest. We find that when estimating a distribution density function given limited amount of sample data, adaptive transport maps are advantageous. In particular, statistics gathered from computing series of adaptive transport maps, trained on a series of randomly chosen subsets of the set of available data samples, leads to uncovering information hidden in the data. As a result, in the radiation biology application considered here, this approach provides a tool for generating hypotheses about gene relationships and their dynamics under radiation exposure.

gene expression data↗

Finding the missing baryons with fast radio bursts and Sunyaev-Zeldovich maps

Almost a third of the cosmic baryons are “missing” at low redshifts, as they reside in the invisible warm-hot intergalactic medium (WHIM). The thermal Sunyaev-Zeldovich (tSZ) effect, which measures the line-of-sight integral of the plasma pressure, can potentially detect this WHIM, although its expected signal is hidden below the noise. Extragalactic dispersion measures (DMs)—obtained through observations of fast radio bursts (FRBs)—are excellent tracers of the WHIM, as they measure the column density of plasma, regardless of its temperature. Here we propose cross correlating DMs and tSZ maps as a new way to find and characterize the missing baryons in the WHIM. Our method relies on the precise (~ arcminute) angular localization of FRBs to assign each burst a DM and a y parameter. We forecast that the signal from the WHIM should be confidently detected in a cross-correlation analysis of ~10 4 FRBs, expected to be gathered in a year of operation of the upcoming CHIME and HIRAX radio arrays, confirming the recent tentative detections of filamentary WHIM. Using this technique, future CMB probes (which might lower the tSZ noise) could determine both the temperature of the WHIM and its evolution to within tens of percent. Overall, DM-tSZ cross correlations hold great promise for studying the baryons in the local Universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Mapping National Forest Aboveground Biomass in Mexico By Integrating GEDI and Landsat Times Series Data

Mexico is one of the countries with great potential for the UN's Reducing Emissions from Deforestation and Forest Degradation (REDD+) program, a key nature-based solution for the forest sector. To monitor carbon stock changes, there is a growing demand for unbiased Monitoring Reporting Verification (MRV) systems to facilitate effective forest management and climate change mitigation strategies. Remote sensing-based national aboveground biomass density (AGBD) estimation over Mexico is scarce and often limited to one-time static mapping, leading to spatiotemporal inconsistency in inputs. As an effort under NASA's Carbon Monitoring System (CMS) program, we have developed a remote sensing-based approach to create consistent historical AGBD maps of Mexico using multi-stream remote sensing data, including spaceborne lidar GEDI and long-term Landsat time series, as well as topographic information. We employ the continuous change detection and classification (CCDC) algorithm for temporal modeling of Landsat surface reflectance, followed by the inference of forest AGBD using a random forest machine learning algorithm with the temporal information of land surface dynamics extracted by the CCDC as input. GEDI provides unprecedented forest structure and AGBD sampling datasets for model training and validation practices. In this presentation, we share the progress made in developing a spatially explicit mapping of historical AGBD changes associated with land surface changes and post-disturbance landscapes.

Taejin Park↗