Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conducting structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Iron-Based Perovskites for Catalyzing Oxygen Evolution Reaction

The slow kinetics of the oxygen evolution reaction (OER) is the main cause of energy loss in many low-temperature energy storage techniques, such as metal–air batteries and water splitting. A better understanding of both the OER mechanism and the degradation mechanism on different transition metal (TM) oxides is critical for the development of the next generation of oxides as OER catalysts. In this paper, we systematically investigated the catalytic mechanism and lifetime of ABO 3-δ perovskite catalysts for the OER, where A = Sr or Ca and B = Fe or Co. During the OER process, the Fe-based AFeO 3-δ oxides with δ ≈ 0.5 demonstrate no activation of lattice oxygen or pH dependence of the OER activity, which is different from the SrCoO 2.5 with similar oxygen 2p-band position relative to the Fermi level. The difference was attributed to the larger changes in the electronic structure during the transition from the oxygen-deficient brownmillerite structure to the fully oxidized perovskite structure and the poor conductivity in Fe-based oxides, which hinders the uptake of oxygen from the electrolyte to the lattice under oxidative potentials. The low stability of Fe-based perovskites under OER conditions in a basic electrolyte also contributes to the different OER mechanism compared with the Co-based perovskites. Finally, this work reveals the influence of TM composition and electronic structure on the catalytic mechanism and operational stability of the perovskite OER catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical properties and thermal stability of Pd-doped copper nitride films

Pd-doped copper nitride films with Pd concentrations up to 5.6 at. % were successfully synthesized by reactive magnetron sputtering of metal targets. Higher concentration of Pd (>5.6 at. %) would deteriorate the quality of the deposits. XPS and XRD data strongly suggest that Pd atoms occupy the centers of the Cu{sub 3}N unit cells rather than simply substituting for the Cu atoms. A reduction in the electrical resistivity by three orders of magnitude was observed when the Pd concentration increases from zero to 5.6 at. %. All the deposits with the Pd concentration up to 5.6 at. % exhibit n-typed conductivity behavior. The corresponding carrier concentrations increase by four orders of magnitude from 10{sup 17} to 10{sup 21} cm{sup -3}. Compared with the undoped copper nitride films, a weakly Pd-doped Cu{sub 3}N films possess fine thermal stability in vacuum. And the decomposition product after annealing at 450 Degree-Sign C exhibits a good metallic behavior, indicating that it qualifies the fabrication of conduct wires or metallic structures for the promising applications.

36 MATERIALS SCIENCE↗

Disorder-driven localization and electron interactions in Bi x ⁢ TeI thin films

Strong disorder has a crucial effect on the electronic structure in quantum materials by increasing localization, interactions, and modifying the density of states. Bi x TeI films grown at room temperature and 230 K exhibit dramatic magnetotransport effects due to disorder, localization, and electron correlation effects, including a metal-insulator transition at a composition that depends on growth temperature. The increased disorder caused by growth at 230 K causes the conductivity to decrease by several orders of magnitude for several compositions of Bi x TeI. The transition from metal to insulator with decreasing composition x is accompanied by a decrease in the dephasing length, which leads to the disappearance of the weak-antilocalization effect. Electron-electron interactions cause low temperature conductivity corrections on the metallic side and Efros-Shklovskii variable range hopping on the insulating side, effects which are absent in single crystalline Bi x TeI. Finally, the observation of a tunable metal-insulator transition and the associated strong localization and quantum effects in Bi x TeI shows the possibility of tuning spin transport in quantum materials via disorder.

36 MATERIALS SCIENCE↗

Influence of the chemical and electronic structure on the electrical behavior of zirconium oxynitride films

This work is devoted to the investigation of decorative zirconium oxynitride, ZrO{sub x}N{sub y}, films prepared by dc reactive magnetron sputtering, using a 17:3 nitrogen-to-oxygen-ratio gas mixture. The color of the films changed from metallic-like, very bright yellow pale, and golden yellow, for low gas mixture flows [from 0 to about 9 SCCM (SCCM denotes cubic centimeter per minute at STP)] to red brownish for intermediate gas flows (values up to 12 SCCM). Associated to this color change there is a significant decrease of brightness. With further increase of the reactive gas flow, the color of the samples changed from red brownish to dark blue (samples prepared with 13 and 14 SCCM). The films deposited with gas flows above 14 SCCM showed only apparent colorations due to interference effects. This change in optical behavior from opaque to transparent (characteristic of a transition from metallic to insulating-type materials), promoted by the change in gas flow values, revealed that significant changes were occurring in the film structure and electronic properties, thus opening new potential applications for the films, beyond those of purely decorative ones. Taking this into account, the electrical behavior of the films was investigated as a function of the reactive gas flow and correlated with the observed chemical, electronic, and structural features. The variations in composition disclosed the existence of four different zones, which were correlated to different crystalline structures. For the so-called zone I, x-ray diffraction revealed the development of films with a B1 NaCl face-centered cubic zirconium nitride-type phase, with some texture changes. Increasing the reactive gas flow, the structure of the films is that of a poorly crystallized overstoichiometric nitride phase, which may be similar to that of Zr{sub 3}N{sub 4}, but with some probable oxygen inclusions within nitrogen positions. This region was characterized as zone II. Zone III was indexed as an oxynitride-type phase, similar to that of {gamma}-Zr{sub 2}ON{sub 2} with some oxygen atoms occupying some of the nitrogen positions. Finally, occurring at the highest flow rates, zone IV was assigned to a ZrO{sub 2} monoclinic-type structure. The composition/structure variations were consistent with the chemical bonding analysis carried out by x-ray photoelectron spectroscopy, which showed oxygen doping in both Zr{sub 3}N{sub 4}- and ZrN-type grown films. The electronic properties of the films exhibited significant changes from zone to zone. Resistivity measurements revealed a very wide range of values, varying from relatively highly conductive materials (for zone I) with resistivity values around few hundreds of {mu}{omega} cm to highly insulating films within zones III and IV, which presented resistivity values in the order of 10{sup 15} {mu}{omega} cm. Regarding zone II, corresponding to oxygen doped Zr{sub 3}N{sub 4}-type compounds, the observed behavior revealed resistivity values increasing steeply from about 10{sup 3} up to 10{sup 15} {mu}{omega} cm, indicating a systematic transition from metallic to insulating regimes.

36 MATERIALS SCIENCE↗

The Effect of Mechanical Milling Period on Conductivity of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} System

One of the most important criteria in determining the best electrolyte is by obtaining good value of conductivity. In this research, Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} system will be prepared in order to find the optimum composition and heat treatment of the samples that gives good conductivity value. The effects of mechanical milling period on glass-ceramics electrolyte in the system Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} have been investigated using X-Ray differential analysis and electrochemical impedance spectroscopy. Mechanical milling (MM) method was used to prepare the system which was converted into glass-ceramics by milled at several periods of time from 2 hours to 8 hours. Some crystalline phases with slight amorphous nature were detected in samples prepared by mechanical milling for 8 hours while single phase of LiTi{sub 2}(PO{sub 4}){sub 3} were obtained from samples that underwent further heat treatment. The sample treated at 250 deg. C for 4 hours obtained highest conductivity with a value of 1.12x10{sup 4} Scm{sup -1}. The activation energy was found to be as low as 0.08 eV.

36 MATERIALS SCIENCE↗

An environment-dependent semi-empirical tight binding model suitable for electron transport in bulk metals, metal alloys, metallic interfaces, and metallic nanostructures. I. Model and validation

Semi-empirical Tight Binding (TB) is known to be a scalable and accurate atomistic representation for electron transport for realistically extended nano-scaled semiconductor devices that might contain millions of atoms. In this paper, an environment-aware and transferable TB model suitable for electronic structure and transport simulations in technologically relevant metals, metallic alloys, metal nanostructures, and metallic interface systems are described. Part I of this paper describes the development and validation of the new TB model. The new model incorporates intra-atomic diagonal and off-diagonal elements for implicit self-consistency and greater transferability across bonding environments. The dependence of the on-site energies on strain has been obtained by appealing to the Moments Theorem that links closed electron paths in the system to energy moments of angular momentum resolved local density of states obtained ab initio. The model matches self-consistent density functional theory electronic structure results for bulk face centered cubic metals with and without strain, metallic alloys, metallic interfaces, and metallic nanostructures with high accuracy and can be used in predictive electronic structure and transport problems in metallic systems at realistically extended length scales.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical properties and band structure of reactive molecular beam epitaxy grown oxygen engineered HfO{sub 2{+-}x}

We have conducted a detailed thin film growth structure of oxygen engineered monoclinic HfO{sub 2{+-}x} grown by reactive molecular beam epitaxy. The oxidation conditions induce a switching between (111) and (002) texture of hafnium oxide. The band gap of oxygen deficient hafnia decreases with increasing amount of oxygen vacancies by more than 1 eV. For high oxygen vacancy concentrations, defect bands form inside the band gap that induce optical transitions and p-type conductivity. The resistivity changes by several orders of magnitude as a function of oxidation conditions. Oxygen vacancies do not give rise to ferromagnetic behavior.

36 MATERIALS SCIENCE↗

Probing the Unique Role of Gallium in Amorphous Oxide Semiconductors through Structure–Property Relationships

This study explores the unique role of Ga in amorphous (a-) In-Ga-O oxide semiconductors through combined theory and experiment. It reveals substitutional effects that have not previously been attributed to Ga, and that are investigated by examining how Ga influences structure–property relationships in a series of pulsed laser deposited a-In-Ga-O thin films. Element-specific structural studies (X-ray absorption and anomalous scattering) show good agreement with the results of ab initio molecular dynamics simulations. This structural knowledge is used to understand the results of air-annealing and Hall effect electrical measurements. The crystallization temperature of a-IO is shown to increase by as much as 325 °C on substituting Ga for In. This increased thermal stability is understood on the basis of the large changes in local structure that Ga undergoes, as compared to In, during crystallization. Hall measurements reveal an initial sharp drop in both carrier concentration and mobility with increasing Ga incorporation, which moderates at >20 at% Ga content. This decline in both the carrier concentration and mobility with increasing Ga is attributed to dilution of the charge-carrying In-O matrix and to increased structural disorder. The latter effect saturates at high at% Ga.

36 MATERIALS SCIENCE↗

Ternary eutectic growth of nanostructured thermoelectric Ag-Pb-Te materials

Nanostructured Ag-Pb-Te thermoelectric materials were fabricated by unidirectionally solidifying the ternary Ag-Pb-Te eutectic and near-eutectic alloys using the Bridgeman method. Specially, the Bridgman-grown eutectic alloy exhibited a partially aligned lamellar microstructure, which consisted of Ag{sub 5}Te{sub 3} and Te phases, with additional 200-600 nm size particles of PbTe. The self-assembled interfaces altered the thermal and electronic transport properties in the bulk Ag-Pb-Te eutectic alloy. Presumably due to phonon scattering from the nanoscale microstructure, a low thermal conductivity ({kappa} = 0.3 W/mK) was achieved of the eutectic alloy, leading to a zT peak of 0.41 at 400 K.

36 MATERIALS SCIENCE↗

Band-gap engineering in fluorographene nanoribbons under uniaxial strain

Based on extensive first-principles calculations, we report the structural and electronic properties of fluorinated graphene, i.e., fluorographene nanoribbons (FGNRs) under uniaxial strain. Our results indicate that the FGNRs are semiconductors with wide direct band gaps regardless of their edge structures. Moreover, the band gap of FGNR can be effectively modulated nonlinearly with the applied uniaxial elastic strain, where the band gap value increases first and then reduces when the applied strain changes from −10.0% to 10.0%. This abnormal behavior mainly originates from the electronic structures of valence and conduction band edges, which is quite different from previously reported linear behavior on graphene nanoribbon. Our results imply the great potential applications of FGNRs in the optical electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of structural and electronic properties of ScN and ScAs in rocksalt and zincblende structure: A DFT approach

In this paper, we have studied the structural and electronic properties of ScN and ScAs in zincblende (ZB) and rocksalt (RS) phases. We have employed the full potential linearized augmented plane wave (FP-APW) method within the density functional theory (DFT). Generalized gradient approximation (GGA), due to Perdew-Burke-Ernzerhof (PBE) has been used to estimate the exchange-correlation functional. Our band structure results for ScN shows the metallic nature, whereas ScAs shows the semiconducting behavior. The obtained results are in excellent agreement with earlier reported data.

36 MATERIALS SCIENCE↗

Structural mechanism of C-type inactivation in K[superscript +] channels

Interconversion between conductive and non-conductive forms of the K{sup +} channel selectivity filter underlies a variety of gating events, from flicker transitions (at the microsecond timescale) to C-type inactivation (millisecond to second timescale). Here we report the crystal structure of the Streptomyces lividans K{sup +} channel KcsA in its open-inactivated conformation and investigate the mechanism of C-type inactivation gating at the selectivity filter from channels 'trapped' in a series of partially open conformations. Five conformer classes were identified with openings ranging from 12 {angstrom} in closed KcsA (C{alpha}-C{alpha} distances at Thr112) to 32 {angstrom} when fully open. They revealed a remarkable correlation between the degree of gate opening and the conformation and ion occupancy of the selectivity filter. We show that a gradual filter backbone reorientation leads first to a loss of the S2 ion binding site and a subsequent loss of the S3 binding site, presumably abrogating ion conduction. These structures indicate a molecular basis for C-type inactivation in K{sup +} channels.

36 MATERIALS SCIENCE↗

Integrated transient thermal-structural finite element analysis

An integrated thermal structural finite element approach for efficient coupling of transient thermal and structural analysis is presented. Integrated thermal structural rod and one dimensional axisymmetric elements considering conduction and convection are developed and used in transient thermal structural applications. The improved accuracy of the integrated approach is illustrated by comparisons with exact transient heat conduction elasticity solutions and conventional finite element thermal finite element structural analyses.

Thornton, E. A.↗

Electronic structure and small-hole polarons in YTiO 3

As a prototypical Mott insulator with ferromagnetic ordering, YTiO 3 (YTO) is of great interest in the study of strong electron correlation effects and orbital ordering. Here we report the first molecular beam epitaxy (MBE) growth of YTO films, combined with theoretical and experimental characterizations of the electronic structure and charge transport properties. The obstacles of YTO MBE growth are discussed and potential routes to overcome them are proposed. DC transport and Seebeck measurements on thin films and bulk single crystals identify p-type Arrhenius transport behavior with an activation energy of ~0.17 eV in thin films, consistent with the energy barrier for small hole polaron migration from hybrid density functional theory calculations. Hard x-ray photoelectron spectroscopy measurements show the lower Hubbard band at 1.1 eV below the Fermi level, whereas a Mott-Hubbard band gap of ~1.5 eV is determined from photoluminescence measurements. These findings provide critical insight into the electronic band structure of YTO and related materials.

36 MATERIALS SCIENCE↗

Role of structural Fe in nontronite NAu-1 and dissolved Fe(II) in redox transformations of arsenic and antimony

Oxidation state is a major factor affecting the mobility of arsenic (As) and antimony (Sb) in soil and aquatic systems. Metal (hydr)oxides and clay minerals are effective sorbents, and may also promote redox reactions on their surfaces via direct or indirect facilitation of electron transfer. Iron substituted for Al in the octahedral sites of aluminosilicate clay minerals has the potential to be in variable oxidation states and is a key constituent of electron transfer reactions in clay minerals. This experimental work was conducted to determine whether structural Fe in clays can affect the oxidation state of As and Sb adsorbed at the clay surface. Another goal of our study was to compare the reactivity of clay structural Fe(II) with systems containing Fe(II) present in dissolved/adsorbed forms. The experimental systems included batch reactors with various concentrations of As(III), Sb(III), As(V), or Sb(V) equilibrated with oxidized (NAu-1) or partially reduced (NAu-1-Red) nontronite, hydrous aluminum oxide (HAO) and kaolinite (KGa-1b) suspensions under oxic and anoxic conditions. The reaction times ranged from 0.5 to 720 h, and pH was constrained at 5.5 (for As) and at 5.5 or 8.0 (for Sb). The oxidation state of As and Sb in the liquid phase was determined by liquid chromatography in line with an inductively coupled plasma mass spectrometer, and in the solid phase by X-ray absorption spectroscopy. Our findings show that structural Fe(II) in NAu-1-Red was not able to reduce As(V)/Sb(V) under the conditions examined, but reduction was seen when aqueous Fe(II) was present in the systems with kaolinite (KGa-1b) and nontronite (NAu-1). The ability of the structural Fe in nontronite clay NAu-1 to promote oxidation of As(III)/Sb(III) was greatly affected by its oxidation state: if all structural Fe was in the oxidized Fe(III) form, no oxidation was observed; however, when the clay was partially reduced ({approx}20% of structural Fe was reduced to Fe(II)), NAu-1-Red promoted the most extensive oxidation under both oxic and anoxic conditions. Electron balance considerations suggest that structural Fe(III) in the NAu-1-Red was the sole oxidant in the anoxic setup, while dissolved O{sub 2} also contributes in oxic conditions. Long-term batch experiments revealed the complex dynamics of As aqueous speciation in anoxic and oxic systems when reduced arsenic was initially added: rapid disappearance of As(III) was observed due to oxidation to As(V) followed by a slow increase of aqueous As(III). This behavior is explained by two reactions: fast initial oxidation of As(III) by structural Fe(III) (anoxic) or Fe(III) and dissolved O2 (oxic) followed by the slow reduction of As(V) by dissolved Fe(II). The resulting re-mobilization of As due to As(V) reduction by aqueous Fe(II) occurs on time scales on the order of days. These reactions are likely significant in a natural soil or aquifer environment with seasonal cycling or slightly reducing conditions with an abundance of clay minerals and dissolved Fe(II).

36 MATERIALS SCIENCE↗

GeP and (Ge{sub 1−x}Sn{sub x})(P{sub 1−y}Ge{sub y}) (x≈0.12, y≈0.05): Synthesis, structure, and properties of two-dimensional layered tetrel phosphides

GeP and Sn-doped GeP were synthesized from elements in bismuth and tin flux, respectively. The layered crystal structures of these compounds were characterized by single crystal X-ray diffraction. Both phosphides crystallize in a GaTe structure type in the monoclinic space group C2/m (No. 12) with GeP: a=15.1948(7) Å, b=3.6337(2) Å, c=9.1941(4) Å, β=101.239(2)°; Ge{sub 0.93(3)}P{sub 0.95(1)}Sn{sub 0.12(3)}: a=15.284(9) Å, b=3.622(2) Å, c=9.207(5) Å, β=101.79(1)°. The crystal structure of GeP consists of 2-dimensional GeP layers held together by weak electron lone pair interactions between the phosphorus atoms that confine the layer. Each layer is built of Ge–Ge dumbbells surrounded by a distorted antiprism of phosphorus atoms. Sn-doped GeP has a similar structural motif, but with a significant degree of disorder emphasized by the splitting of all atomic positions. Resistivity measurements together with quantum-chemical calculations reveal semiconducting behavior for the investigated phosphides. - Graphical abstract: Layered phosphides GeP and Sn-doped GeP were synthesized from elements in bismuth and tin flux, respectively. The crystal structure of GeP consists of 2-dimensional GeP layers held together by weak electron lone pair interactions between the phosphorus atoms that confine the layer. Sn-doped GeP has a similar structural motif with a significant degree of disorder emphasized by the splitting of all atomic positions. Resistivity measurements together with quantum-chemical calculations reveal semiconducting behavior for the investigated phosphides. - Highlights: • GeP crystallizes in a layered crystal structure. • Doping of Sn into GeP causes large structural distortions. • GeP is narrow bandgap semiconductor. • Sn-doped GeP exhibits an order of magnitude higher resistivity due to disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Simulation of Amorphous Graphite

An amorphous graphite material has been predicted from molecular dynamics simulation using ab initio methods. Carbon materials reveal a strong proclivity to convert into a sp 2 network and then layer at temperatures near 3000 K within a density range of ca. 2.2–2.8 g/cm 3 . Each layer of amorphous graphite is a monolayer of amorphous graphene including pentagons and heptagons in addition to hexagons, and the planes are separated by about 3.1 Å. The layering transition has been studied using various structural and dynamical analyses. The transition is unique as one of partial ordering (long range order of planes and galleries, but topological disorder in the planes). The planes are quite flat, even though monolayer amorphous graphene puckers near pentagonal sites. Interplane cohesion is due partly to non-Van der Waals interactions. The structural disorder has been studied closely, especially the consequences of disorder to electronic transport. Finally, it is expected that the transition elucidated here may be salient to other layered materials.

42 ENGINEERING↗