Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “component performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Oxide Dispersion Strengthened Ferritic Steel Wire Feedstock Development for Large Format Additive Manufacturing - CRADA 620 (Abstract)

This CRADA project funded through DOE’s INFUSE program seeks to demonstrate the viability of fabricating large, complex parts from oxide dispersion strengthened (ODS) steel with advanced manufacturing. Exhibiting excellent radiation tolerance and high mechanical performance at elevated temperatures, ODS steel is a promising structural material candidate for near-plasma components in fusion energy systems. Its use, however, has been limited by a lack of manufacturability. This project will seek to produce ODS steel wire through a solid-state shear assisted extrusion process and then demonstrate that the wire can undergo controlled local melting while being welded with the final part sufficiently retaining the beneficial properties of ODS steel. This would allow the use of wire-arc additive manufacturing (WAAM) to manufacture large-scale ODS parts, even though ODS is currently only available as a powder. WAAM is a promising technique for producing components like the replaceable ARC vacuum vessel in CFS’ fusion reactor design. Meanwhile, this project will also expand PNNL’s capability in producing custom wire feedstock with friction extrusion, enabling downstream large-scale manufacturing with WAAM and solid-state based additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advanced Compressors for CO2-Based Power Cycles and Energy

Pumped thermal energy storage (PTES) is a cost-effective method for grid-scale, long-duration electrical energy storage (LDES). PTES uses a heat pump cycle to transfer thermal energy from a low temperature reservoir (LTR) to a high temperature reservoir (HTR), later using a heat engine cycle to reverse the process. A key component of the PTES system, the heat pump compressor, represents a significant driver to the cost, performance and operating characteristics of the PTES system. For grid-scale charging (>100 MW), traditional compressor scaling charts indicate that the operating conditions needed would be best served by a multistage axial compressor. While frame gas turbine compressors at these power ratings exist and operate at higher pressure ratios than needed for the CO2 PTES system, the inlet pressure and fluid density of this application exceed experience values. A conceptual design of a large-scale CO2 axial compressor was completed, including mean-line estimates of the compressor performance at full power conditions. The results of the conceptual design were used to refine the PTES cycle design, and updated operating conditions provided for further aero design optimization. A roughly one third scale of the first three stages of the 100 MW compressor was designed, built, and tested at relevant PTES charging conditions. Results of this test program are compared against high-resolution computational fluid dynamics models.

Compressor Heat↗
DOE OSTI2024

Data From Experiments on Bubbling Fluidization of Zeolite in a Rectangular Bubbling Fluidized Bed

Fluidization experiments were conducted in a lab-scale rectangular bubbling fluidized bed with the objective of generating a high-quality dataset for model validation and artificial intelligence/machine learning (AI/ML) training. Zeolite was chosen as the bed material, and the fluidizing medium was air as supplied by a compressor. Three different flow rates at the inlet were chosen such that the particles were fluidized but not elutriated from the system. The test matrix involved randomization and replicates to provide uncertainty estimates as well as four different batches of zeolite as the bed material. The quantities of interest obtained from this study were statistics of differential pressures, interface heights, and particle velocities. Considering all the components of the elaborate test plan, the results obtained were consistent and reproducible. Characterization tests were performed to estimate particle properties including size, density, coefficient of friction, coefficient of restitution, and minimum fluidization velocity. In addition, the angle of repose from granular discharge experiments has been reported to account for rolling friction, though its effect on the overall process is expected to be negligible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Oxide Dispersion Strengthened Ferritic Steel Wire Feedstock Development for Larger Format Additive Manufacturing (CRADA Final Report)

This CRADA project funded through DOE’s INFUSE program sought to demonstrate the viability of fabricating large, complex parts from oxide dispersion strengthened (ODS) steel with advanced manufacturing. Exhibiting excellent radiation tolerance and high mechanical performance at elevated temperatures, ODS steel is a promising structural material candidate for near-plasma components in fusion energy systems. Its use, however, has been limited by a lack of manufacturability. This project sought to produce ODS steel wire through a solid-state shear assisted extrusion process and then demonstrate that the wire can undergo controlled local melting while being welded with the final part sufficiently retaining the beneficial properties of ODS steel. This would allow the use of wire-arc additive manufacturing (WAAM) to manufacture large-scale ODS parts, even though ODS is currently only available as a powder. WAAM is a promising technique for producing components like the replaceable ARC vacuum vessel in CFS’ fusion reactor design. Meanwhile, this project will also expand PNNL’s capability in producing custom wire feedstock with friction extrusion, enabling downstream large-scale manufacturing with WAAM and solid-state based additive manufacturing. The project achieved its goals of developing tooling and fixturing to produce ODS wire at smaller diameters than previous projects. Several small lengths of wire of 1.5 mm and 2.5 mm diameter in the range of 2.5-30 mm long were produced at tool temperatures that are known to cause ODS particle coarsening (~1200 °C). Fixtures and tooling for longer (>1 m) wires were developed but further process development is needed reduce tool temperature during extrusions and to increase wire length needed for WAAM testing and development.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Track Reconstruction using Graph Neural Networks in the EMPHATIC Experiment

Track reconstruction is essential for extracting physics observables from detector data in high-energy and nuclear physics experiments. In this work, we investigate the use of graph neural networks (GNNs) to reconstruct particle momentum in the EMPHATIC experiment using simulated data. The model takes raw hit information from the silicon strip detectors (SSDs) as input and is trained to predict momentum components and the scattering angle of the particle. We describe the GNN architecture, training procedure, and performance metrics, and present results showing improved resolution in momentum reconstruction. These results demonstrate the potential of GNN-based approaches in track reconstruction tasks within complex detector environments like EMPHATIC.

Bhattarai, Aayush [Notre Dame U.]↗
DOE OSTI2022

Sensitivity of DUNE to low energy physics searches

The Deep Underground Neutrino Experiment (DUNE), a next-generation long-baseline neutrino oscillation experiment, is a powerful tool to perform low energy physics searches. DUNE will be uniquely sensitive to the electron-neutrino-flavour component of the burst of neutrinos expected from the next Galactic core-collapse supernova, and also capable of detecting solar neutrinos. DUNE will have four modules of 70-kton liquid argon mass in total, placed 1.5 km underground at the Sanford Underground Research Facility in the USA. These modules are being designed exploiting different liquid argon time projection chamber technologies and based on the physics requirements that take into account the particularities of the low energy physics searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

A Structural Basis for Inhibition of the Complement Initiator Protease C1r by Lyme Disease Spirochetes

Abstract Complement evasion is a hallmark of extracellular microbial pathogens such as Borrelia burgdorferi, the causative agent of Lyme disease. Lyme disease spirochetes express nearly a dozen outer surface lipoproteins that bind complement components and interfere with their native activities. Among these, BBK32 is unique in its selective inhibition of the classical pathway. BBK32 blocks activation of this pathway by selectively binding and inhibiting the C1r serine protease of the first component of complement, C1. To understand the structural basis for BBK32-mediated C1r inhibition, we performed crystallography and size-exclusion chromatography–coupled small angle X-ray scattering experiments, which revealed a molecular model of BBK32-C in complex with activated human C1r. Structure-guided site-directed mutagenesis was combined with surface plasmon resonance binding experiments and assays of complement function to validate the predicted molecular interface. Analysis of the structures shows that BBK32 inhibits activated forms of C1r by occluding substrate interaction subsites (i.e., S1 and S1’) and reveals a surprising role for C1r B loop–interacting residues for full inhibitory activity of BBK32. The studies reported in this article provide for the first time (to our knowledge) a structural basis for classical pathway–specific inhibition by a human pathogen.

Garrigues, Ryan J. (ORCID:0000000259233250)↗
DOE OSTI2021

Characterizing Signatures of Geothermal Exploration Data with Machine Learning Techniques: An Application to the Nevada Play Fairway Analysis

We are introducing machine learning methods to the play fairway analysis to generate geothermal potential maps to support the evaluation of geothermal resource potential and the exploration for undiscovered blind geothermal systems in the Nevada Great Basin region. Our project aims to identify new ways to combine the play fairway data and empirically organize relationships between feature weights and labels in an improved workflow. As a means of doing this, we introduce machine learning methods to evaluate the influence of certain geological and geophysical features/feature sets in predicting geothermal favorability. This report highlights promising approaches based on supervised and unsupervised learning methods. First, we demonstrate a filter method applied to supervised classification modeling. The supervised filter method is based on permutation analysis to evaluate every possible feature combination/drop out scenario and rank feature influence based on the performance variance of supervised classification models. Additionally, we present an unsupervised factor analysis based on principal component analysis coupled with a semi-supervised kmeans clustering algorithm. This analysis allows us to identify the optimal number of groups/clusters for training sites and structural settings to identify feature patterns including correlation, variance, and latent and dominant feature relationships. The results from these methods offer a promising avenue for identifying favorable sources of predictive information to identify the locations of blind geothermal systems and furthering our understanding of complex geothermal feature and label relationships in the Great Basin region and beyond.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Corrosion Testing Of Additively Manufactured Stainless Steel 316H In Molten Salt Environments

The development of a new ASTM standard for evaluating the corrosion resistance of additive manufactured (AM) stainless steel (SS) 316H in chloride molten salts is critical for the use of these materials in extreme environments such as molten salt reactors (MSRs). This report pertains to a work package of the Advaned Materials and Manufacturing Technologies (AMMT) developing a systematic methodology to link changes in AM fabrication parameters, namely surface finishing, porosity, microstructure, and chemical heterogeneity, to corrosion performance in NaCl-MgCl2 salt, a proposed secondary coolant for MSRs. During Fiscal Year 2024, Idaho National Laboratory investigators in the AMMT program, utilized SS316H bars, fabricated with laser bed powder fusion at Los Alamos National Laboratory, to establish and optimize the workflow for evaluating these process-to-performance relationships. Standard practices for specimen preparation were established using these specimens, with particular focus on descaling and sectioning methods that align with ASTM guidelines. A comprehensive experimental design for static corrosion testing was developed, with pre- and post-exposure analysis utilizing optical microscopy and scanning electron microscopy. So far standard descaling techniques were optimized, one static corrosion test was conducted on the LANL AM SS316H specimens, and pre- and post-corrosion practices were established. In addition, the work package yielded a review paper on corrosion testing gaps for AM materials in nuclear applications and submitted a proposal for a rapid-turnaround experiment to the Nuclear Science User Facilities Program to investigate the combined effects of proton irradiation and corrosion on AM SS316H. This work package establishes a foundation for evaluating processing-to-performance relationships for AM SS316H in harsh conditions, contributing to the safe and efficient design of components for next-generation nuclear reactors. The creation of a standardized methodology and the generation of relevant publications and future research pathways represent significant strides towards integrating AM materials into critical applications where corrosion resistance is paramount.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High Power Density, Carbon Neutral Electrical Power Generation for Air Vehicles

The synergistic integration of a Solid Oxide Fuel Cell-Combustor (SOFC-C) with a turbogenerator (TG) will provide a very high fuel-to-electricity conversion efficiency while maintaining high power-to-weight ratio during high-altitude flight. The proposed SOFC-C-TG power generation technology exceeds the REEACH technical performance targets (TPT). This unique concept addresses many of the challenges faced in all electric propulsion-based aviation. The system has high part-load efficiency (more than 65% lower heating value (LHV)) during long cruise times, load following capability, high-power capacity at high altitudes adapting to low temperatures and pressures, rapid startup time of less than 30 minutes (proven with current SOFC technology), high power density (more than 3.2 kW/kg), efficient thermal management, and a foundation for a compact, efficient electrical storage and power generation system (ESPG). The SOFC-C concept achieves the technology targets by reducing the complexity of traditional fuel cell-gas turbine hybrid systems (FC-GT). The SOFC-C does not require heat exchangers and dramatically reduces the balance of plant increasing power density and performance in efficiency. The reduction in mass through elimination of heat exchangers, external reformer, and other components dramatically decreases the overall thermal dampening of the system which enables rapid startup and load following capability. Direct control of the cathode inlet temperature of the SOFC-C enables rapid warm-up of the SOFC tubes with the ability to reach operating temperature and full power in less than 30 minutes.

03 NATURAL GAS↗
DOE OSTI2021

Dynamic Characterization and Performance Evaluation of a 10-kw Power Take-Off with Mechanical Motion Rectifier for Wave Energy Conversion

The power take-off (PTO) is a key component for wave energy converters (WECs). The dynamic properties of the PTO influence the response of the WEC and should be considered when designing the WEC and not oversimplified. In addition, the efficiency as well as the reliability can play an important role on whether the PTO can be suitable for real-world applications. In this paper, a novel compact PTO rated at 10 kW is designed and prototyped, and a comprehensive nonlinear dynamic model is established for the PTO. Through bench testing, the unknown parameters of the dynamic model are characterized and determined. Further verification shows that the model can predict the dynamic performance of the PTO well. In addition, the test results show that the mechanical motion rectifier PTO can achieve good energy transfer efficiency, especially for low-load and low-speed conditions.

bench test↗
DOE OSTI2024

Performance Results on CPU/GPU Exascale Architectures for OMEGA: The Ocean Model for E3SM Global Applications

The US Department of Energy (DOE) conducts climate simulations on some of the world’s largest supercomputers. These exascale machines use heterogeneous architectures with both CPUs and GPUs, and scientific codes must adapt to make full use of this computing power. Los Alamos National Lab is developing Omega: The Ocean Model for E3SM Global Applications, which is specifically designed for modern exascale computers. It uses external libraries that have been optimized for a variety of architectures to run on different supercomputers. Omega is an unstructured-mesh ocean model based on TRiSK numerical methods. It will be the new ocean component of the DOE’s Energy Exascale Earth System Model (E3SM). The algorithms in Omega follow those of the current ocean component, MPAS-Ocean, but it will be written in C++ rather than Fortran to take advantage of the Kokkos performance portability library. Omega spatial operators are written as Kokkos kernels to run efficiently on both CPUs and GPUs. Work on Omega began in 2023 with a new C++ framework for unstructured mesh partitioning, halo exchanges, parallel IO, and Kokkos interfaces. The current version, Omega-0, is being developed to solve the shallow water equations and at present includes all of the tendency terms but not time stepping. Here we share the results of Omega-0 verification and performance testing. Verification includes unit tests implemented with CTest as well as convergence tests in Polaris, an in-house python package with a large suite of test problems. Performance tests compare simulations conducted on CPUs versus GPUs and across different architectures: tests are run on Frontier, which has AMD “Optimized 3rd Gen EPYC” CPUs and AMD MI250X GPUs, as well as Perlmutter, which is composed of AMD EPYC 7763 CPUs and NVIDIA A100 GPUs.

58 GEOSCIENCES↗
DOE OSTI2026

Integrative Modeling and Analysis of Fungal Central Carbon Metabolism

Over a thousand fungal genomes have been sequenced, yet manually curated genome-scale metabolic models (GEMs) are available for only a limited number of species. Moreover, these models have often been developed independently, leading to inconsistencies in namespaces, compartment definitions, and pathway representations that hinder comparative analysis, the systematic reuse of prior curation efforts, and the integration of consolidated metabolic knowledge. Here, we present the Consolidated Fungal Core Metabolism Model (CFCMM), constructed by integrating thirteen published fungal models spanning Ascomycota, Mucoromycota, and both Crabtree-positive and Crabtree-negative yeasts. We harmonized metabolites and reactions into a non-redundant shared ModelSEED ontological space, standardized compartmentalization, and refined gene–protein–reaction (GPR) rules. Using pathway-level visualization and systematic gap detection, we further improved the integrated network through literature-guided curation to correct stoichiometry, stereospecificity, and pathway architecture. Orthologous protein family reconstruction and functional annotation workflows were used to validate and inform GPR associations, with particular emphasis on ambiguous enzyme superfamilies and membrane-associated components. Using the resulting CFCMM, we built high-quality central carbon core models for each fungus and performed flux balance analysis to quantify ATP-yield variation under aerobic and anaerobic conditions, explicitly evaluating scenarios driven by differences in electron transport chain (ETC) composition. Simulations reproduced the expected fermentative yield of approximately 2 mmol ATP per mmol glucose under anaerobic conditions and separated the thirteen fungi into two bioenergetic groups under aerobic respiration based on Complex I status, with predicted yields of approximately 30 versus 22 mmol ATP per mmol glucose. Forcing flux through the alternative oxidase bypass further reduced ATP yields to approximately 12 and 4 mmol ATP per mmol glucose in Complex I-containing and Complex I-lacking fungi, respectively. Collectively, this work provides a manually curated, ModelSEED-consistent, and extensible fungal core metabolic template, deployed in DOE KBase as a resource for automated reconstruction of central carbon core models from any sequenced fungal genome. In addition, the CFCMM provides modular components for developing GEMs with more accurate energy predictions and enables robust comparative analyses of fungal bioenergetics and core metabolic diversity

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Characterization of Long-Term Service Coal Combustion Power Plant Extreme Environment Materials

The objective of this DOE-sponsored project was to develop a comprehensive database of mechanical properties, alloy microstructures, and to a lesser extent, the oxidation/corrosion behaviors of coal-fired power plant components, such as boiler tubing, steam headers, and steam piping, which had been in service for at least 100,000 operating hours (preferably more than 200,000 operating hours) under the operating conditions of high temperatures and high mechanical stresses where creep, fatigue, steam-side oxidation, and fireside corrosion were life-limiting factors. The components included in this database consisted of ferritic steels, creep strength enhanced ferritic (CSEF) steels, and 300-series H-grade stainless steels, as well as dissimilar metal welds (DMWs) among these types of materials. As a result of extensive metallurgical characterization and mechanical testing performed in this project, a comprehensive database on mechanical properties and detailed quantitative microstructural information was successfully developed for several long-term serviced EEM components. Such a database can be used by material research communities to develop, calibrate, refine, and validate mechanical behaviors, models, and other assessment tools for accurate prediction of remaining life of major components under similar EEM operating conditions.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Improving high temperature resilience of fiber sensor embedded smart components through laser shock peening

This study explores the use of laser shock peening (LSP) to enhance material properties and high-temperature performance of fiber-sensor-fused smart parts fabricated by additive manufacturing (AM) methods. Using embedded fiber sensors as distributed strain gauges, the study demonstrates that LSP can induce compressive strains of up to 130 µε on fiber embedded 1-mm below metal surfaces. The electron backscatter diffraction (EBSD) analysis shows that, with optimized LSP parameters, the metallic matrix undergoes substantial microstructural refinement, resulting in denser structures. Thermal cycling tests showed that the LSP process can increase fiber slippage temperatures by more than 50 °C. This work shows that the LSP process is an effective room-temperature process for enhancing both surface quality and increasing fiber slippage threshold under both thermal and mechanical stress.

Zhong, Shuda [University of Pittsburgh, PA (United↗
DOE OSTI2026

An Uncertainty-Informed and High-Fidelity Performance Forecasting Framework for Heliostat Fields

Concentrating Solar Thermal (CST) tower systems employ heliostat fields to direct solar energy to a central receiver, which then transfers the heat either directly to a thermal process (e.g., steam production) or to a thermal energy storage system for future use. Heliostat fields compose a significant proportion of the project costs of a CST tower system and the performance of the heliostats determines a plant's productivity at a given location. While CST characterization tools such as SolarPILOT and System Advisor Model (SAM) include a large collection of inputs that influence the performance of a CST tower system, many are uncertain prior to the development of the project and may have a significant impact on the overall energy delivery and profitability of a project; moreover, the fidelity of these models under default conditions may be insufficient to determine the value of component improvements such as those under development in the Heliostat Consortium. This work introduces a Monte Carlo simulation framework that incorporates uncertainty in key performance parameters to generate confidence intervals and percentile estimates for a CST solar field's energy delivery.

14 SOLAR ENERGY↗
DOE OSTI2022

Cost-Efficiency balanced polymer acceptors based on lowly fused Dithienopyrrolo[3, 2b]benzothiadiazole for 16.04% efficiency All-Polymer solar cells

All-polymer solar cells (All-PSCs) attracted increasing attention due to the outstanding thermal stability and mechanical properties. The current prevailing polymer acceptors for most efficient All-PSCs are polymerized high-performance small molecule acceptor of Y6, i.e. the dithienothiopheno[3,2-b]-pyrrolobenzothiadiazole (BTTP) based polymers. However, the BTTP-based polymers often show relatively shallow highest occupied molecular orbital (HOMO) energy level and high figure of merit (FOM), which limit the rational selection of paring donor polymers. Herein, we presented two low-cost polymer acceptors, namely as BTP-T2F and BTP-2T2F, based on lowly fused dithienopyrrolo[3,2b]benzothiadiazole (BTP, removing two thiophene cycles from BTTP). Here the BTP-based polymers exhibited deeper HOMO levels around –5.90 eV, which could match variable donor polymers with low-lying HOMO levels, such as low-cost PTQ10. Additionally, the synthesis was significantly simplified compared to BTTP-based polymers. A power conversion efficiency (PCE) of 14.32% was achieved in binary blend device containing PTQ10:BTP-2T2F. By adding a miscibility-enhancing PBDTCl-TPD as a third component, the top PCE of 16.04% was obtained in ternary blend All-PSCs. Combining the high device performance and low estimated cost, extraordinary cost-efficiency balance was realized within these BTP-based polymer acceptors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Platinum group metal-free Fe-based (Fe-N-C) oxygen reduction electrocatalysts for direct alcohol fuel cells

In direct alcohol fuel cells (DAFCs), the oxidation of alcohols happens at the expenses of the oxygen reduction reaction at the cathode. DAFCs' cathodes use a significant amount of platinum that is an expensive critical raw material. Moreover, platinum oxidizes alcohols, a fact that combined with alcohol crossover, decreases significantly the performance of the cells. The use of Fe-based (Fe-N-C) platinum group metal–free (PGM-free) cathodes is a convenient strategy to overcome these limitations. This review analyzes the application of PGM-free cathodes to DAFCs. The discussion focuses on acidic systems and covers the following subjects: (i) the breakdown of DAFC potential in its components, (ii) the analysis of the advantages from the use of the PGM-free cathode, and (iii) a review of the performance and durability of DAFCs. Finally, the review closes with a view of the authors of the future perspective for the research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗