Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “case studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

The radiative budget of tropical clouds - A case study

Data collected during flight 9 of the Stratosphere-Troposphere Exchange Project (STEP), in Australia (1987), are used in an attempt to define the nature of one particular cirrus outflow region and its radiative impact. To explore the mechanisms by which air is exchanged between the stratosphere and troposphere, a series of instruments was flown on the NASA ER-2 high-altitude research aircraft to make measurements relevant to the radiative budget of tropical clouds. The data acquired included upwelling infrared radiance at 10.5 and 6.5 microns (spectral bandwidth of 1 micron); net infrared flux (spectral bandwidth of 3 to 40 microns); cloud particle size distribution; water-vapor and total water (vapor plus condensed phase); aerosol particle size distribution; and ambient temperature.

Ackerman, T. P.↗
NASA NTRS1989

Modeling new production in upwelling centers - A case study of modeling new production from remotely sensed temperature and color

A method has been developed for estimating new production in upwelling systems from remotely sensed surface temperatures. A shift-up model predicts the rate of adaptation of nitrate uptake. The time base for the production cycle is obtained from a knowledge of surface heating rates and differences in temperature between the point of upwelling and each pixel. Nitrate concentrations are obtained from temperature-nitrate regression equations. The model was developed for the northwest Africa upwelling region, where shipboard measurements of new production were available. It can be employed in two modes, the first using only surface temperatures, and the second in which CZCS color data are incorporated. The major advance offered by this method is the capability to estimate new production on spatial and time scales inaccessible with shipboard approaches.

Dugdale, Richard C.↗
NASA NTRS1990

Attempting to detect and record brushland in the northeastern United States using MSS data - Schoharie County, N.Y., as a case study

Before county and local governments will utilize satellite data extensively for landcover inventories, digital image processing techniques must be developed to identify transitional land-use conditions and create large-scale, readable land-cover maps. This study examines a satellite-based land-cover inventory done for Schoharie County, New York and reviews the problems encountered in identifying and mapping brushland - a significant transitional land use - within the county and region. Brushland throughout the Northeast represents a barometer for measuring the shift away from agricultural land use to second-home property. Detecting and locating brushland on a regular basis can greatly assist county and local government officials in planning and managing a county's future.

Baumann, Paul R.↗
NASA NTRS1990

A case study of the Thunderstorm Research International Project storm of July 11, 1978. I - Analysis of the data base

The data obtained at the time of the Thunderstorm Research International Project storm at the Kennedy Space Center on July 11, 1978 are analyzed in a model-independent manner. The data base included data from three Doppler radars, a lightning detection and ranging system and a network of 25 electric field mills, and rain gages. Electric field measurements were used to analyze the charge moments transferred by lightning flashes, and the data were fitted to Weibull distributions; these were used to estimate statistical parameters of the lightning for both intracloud and cloud-to-ground flashes and to estimate the fraction of the flashes which were below the observation threshold. The displacement and the conduction current densities were calculated from electric field measurements between flashes. These values were used to derive the magnitudes and the locations of dipole and monopole generators by least squares fitting the measured Maxwell current densities to the displacement-dominated equations.

Nisbet, John S.↗
NASA NTRS1990

A case study of the Thunderstorm Research International Project storm of July 11, 1978. II - Interrelations among the observable parameters controlling electrification

This paper discusses electrical system parameters that would be consistent with observations of the Thunderstorm Research International Project storm at the Kennedy Space Center on July 11, 1978, described by Nisbet et al. (1990). Three-dimensional electrodynamic modeling of the thundercloud electrification made it possible to estimate the current moments and electrical power generated continuously throughout the evolution of the two cells of the storm. The current moments generated were compared with the current moments transferred by intercloud and cloud-to-ground lightning. It is shown that, for the southern cell, which produced a charge moment of about 8.4 MC m, lightning utilized about 84 percent of the charge moment separated; for the northern cell, which produced about 1.1 MC m, lightning utilized about 60 percent of the charge moment separated.

Nisbet, John S.↗
NASA NTRS1990

A multisatellite case study of the expansion of a substorm current wedge in the near-earth magnetotail

Results are presented on observations from four satellites (GOES 5, GOES 6, AMPTE CCE, and AMPTE IRM) and two ground stations (San Juan and Tucson) on a substorm that occurred on April 19, 1985 at about 0830 UT. The four spacecraft were arrayed in a configuration that made it possible to separate the effects arising from the longitudinal versus the radial expansion of the substorm current wedge and thus to examine its spatial evolution. The sequence of events that was observed suggests that, during this substorm, the disruption of the cross-tail current sheet, the formation of the substorm current wedge, and the expansion of the plasma sheet began in the near-earth region, and subsequently spread tailward as well as longitudinally.

Lopez, R. E.↗
NASA NTRS1989

Multiprogramming performance degradation - Case study on a shared memory multiprocessor

The performance degradation due to multiprogramming overhead is quantified for a parallel-processing machine. Measurements of real workloads were taken, and it was found that there is a moderate correlation between the completion time of a program and the amount of system overhead measured during program execution. Experiments in controlled environments were then conducted to calculate a lower bound on the performance degradation of parallel jobs caused by multiprogramming overhead. The results show that the multiprogramming overhead of parallel jobs consumes at least 4 percent of the processor time. When two or more serial jobs are introduced into the system, this amount increases to 5.3 percent

Dimpsey, R. T.↗
NASA NTRS1989

Case studies in serial and parallel simulation

The design of a ground combat simulation in a time-driven and in an event-driven style is discussed. The differences between time-driven and event-driven simulation are illustrated, and performance results for the two systems executing both serially and in parallel are presented. It is noted that the event-driven style produces a more efficient system both serially and in parallel, primarily because it minimizes the number of messages produced and thereby reduces the amount of computation.

Wieland, Frederick↗
NASA NTRS1990

The ionosphere as a focusing lens - A case study involving simultaneous type III solar radio storm measurements from the ISIS 1 and 2 and ISEE 3 satellites

The possibility of using terrestrial ionospheric focusing to improve the directivity of electric dipoles on space missions has been investigated by comparing simultaneous observations of a solar radio storm by the ISIS 1 and ISIS 2 spacecraft, in near earth orbit, and the ISEE 3 spacecraft located beyond the magnetosphere. To this end, a three-dimensional ray tracing in a spherically stratified ionosphere has been carried out for conditions appropriate to the observations by the ISIS spacecraft of a solar radio storm in September 1983. The procedure allows Poynting flux spectral densities measured on ISIS to be converted to spectral densities well outside the ionosphere where they can be compared directly with simultaneous observations on ISEE 3. The results demonstrate good agreement over their common observing frequency range (1-2 MHz).

James, H. G.↗
NASA NTRS1989

Case studies in configuration control for redundant robots

A simple approach to configuration control of redundant robots is presented. The redundancy is utilized to control the robot configuration directly in task space, where the task will be performed. A number of task-related kinematic functions are defined and combined with the end-effector coordinates to form a set of configuration variables. An adaptive control scheme is then utilized to ensure that the configuration variables track the desired reference trajectories as closely as possible. Simulation results are presented to illustrate the control scheme. The scheme has also been implemented for direct online control of a PUMA industrial robot, and experimental results are presented. The simulation and experimental results validate the configuration control scheme for performing various realistic tasks.

Seraji, H.↗
NASA NTRS1989

Expanding the domain of a prototype expert system with an eye on future maintenance - The FIESTA case study

The methods by which an expert system architecture can support such key elements of domain expansion and maintenance as knowledge acquisition, representation, addition, and modification, are presently illustrated by the Fault Isolation Expert System for TDRSS Applications (FIESTA). FIESTA highlights such similarities between conventional software engineering and expert system development as the benefits that accrue to loose coupling, modularity, and documentation. A major difference, however, is the set of opportunities afforded automated end-user maintenance by expert system technology.

Happell, Nadine↗
NASA NTRS1990

The application of optical potentials for reactive scattering - A case study

A precise method is presented for measuring decay fractions of metastable cluster ions with corrections concerning instrumental artifacts and ion trajectory of parents and daughters. Experimental data are used to derive the Gspann parameter and heat capacity of clusters as described in Klots' evaporative ensemble model. The model is applied to obtain binding energies of ammonia cluster ions. The deduced binding energy values are in very good agreement with both thermochemical data and Engelking's (1986) modified statistical theory.

Neuhauser, Daniel↗
NASA NTRS1989

Linear optimization - A case study in performance analysis

The paper deals with the performance of two parallel variants of the simplex algorithm on a message-passing system. First, the simplex algorithm is reviewed, two possible parallelizations of the algorithm are discussed, and results of benchmark speedups of the alternatives are presented. Between column and row partitionings, the row partitioning method is found to be generally superior, while the column partitioning method is more efficient when the number of rows is small, and the number of columns is much greater that the number of rows. Various performance analysis tools are then applied to examine the reasons for relative performance differences, and communication idle time due to global minimization and load imbalances is noted as the main factor in execution slowdown.

Stunkel, Craig B.↗
NASA NTRS1990

Performance degradation due to multiprogramming and system overheads in real workloads - Case study on a shared memory multiprocessor

The performance degradation due to the multiprogramming (MP) overhead in a parallel execution environment is quantified. In addition, total system overhead is also measured. A methodology, which estimates the MP overhead present in real workloads, is illustrated with real measurents. It is found that MP overhead usually consumes between 10 and 23 percent of the processing power available to parallel programs. The mean MP overhead is determined to be 16 percent which is well over half the total system overhead executed on the system (the mean system overhead is determined to be 24 percent of the processing power). It is found that MP overhead, total system overhead, and application completion time are all moderately correlated.

Dimpsey, R. T.↗
NASA NTRS1990

The interaction of impulsive solar wind discontinuities with the magnetosphere - A multi-satellite case study

Data collected on September 4-5, 1984 by the outbound AMPTE/IRM spacecraft which stayed just outside the expanding earth's bow shock for 7.5h are examined. The data are gathered during an unusual period for which the solar wind pressure and magnetic field are relatively constant except for two discontinuities with associated approximately equal to 1 min duration pressure pulses. The observations indicate that the bow shock reacts rapidly to solar wind dynamic pressure variations; that both discontinuity/pressure pulse events were followed more or less immediately by a decrease in the geosynchronous particle fluxes, indicating the growth phase of a substorm and possibly also the shadowing of energetic ions by the compressed magnetopause followed after 10-30 min by a sudden enhancement in the energetic particles which began on the nightside and drifted to the dayside; and sudden impulse ground signatures are observed which seem to depend critically on the IMF orientation as well as on the longitude and latitude of the particular ground stations.

Labelle, J.↗
NASA NTRS1989

Software design with fuzzy requirements (A case study)

The author describes the resource allocation and planning helper (RALPH) scheduling system developed at NASA's Jet Propulsion Laboratory. RALPH addresses the concerns of designing software systems to minimize the need to recode for changes and upgrades; this concern is acute when requirements are uncertain or changing. Determining requirements, understanding the problem, designing for change, and tradeoffs are also discussed.

Werntz, David G.↗
NASA NTRS1986

An expert system prototype for aiding in the development of software functional requirements for NASA Goddard's command management system: A case study and lessons learned

At NASA Goddard, the role of the command management system (CMS) is to transform general requests for spacecraft opeerations into detailed operational plans to be uplinked to the spacecraft. The CMS is part of the NASA Data System which entails the downlink of science and engineering data from NASA near-earth satellites to the user, and the uplink of command and control data to the spacecraft. Presently, it takes one to three years, with meetings once or twice a week, to determine functional requirements for CMS software design. As an alternative approach to the present technique of developing CMS software functional requirements, an expert system prototype was developed to aid in this function. Specifically, the knowledge base was formulated through interactions with domain experts, and was then linked to an existing expert system application generator called 'Knowledge Engineering System (Version 1.3).' Knowledge base development focused on four major steps: (1) develop the problem-oriented attribute hierachy; (2) determine the knowledge management approach; (3) encode the knowledge base; and (4) validate, test, certify, and evaluate the knowledge base and the expert system prototype as a whole. Backcasting was accomplished for validating and testing the expert system prototype. Knowledge refinement, evaluation, and implementation procedures of the expert system prototype were then transacted.

Liebowitz, Jay↗