Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bonding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

The importance of atomic and molecular correlation on the bonding in transition metal compounds

The determination of accurate spectroscopic parameters for molecular systems containing transition metal atoms is shown to require extensive data sets and a high level correlation treatment, and techniques and their limitations are considered. Extensive results reported on the transition metal atoms, hydrides, oxides, and dimers makes possible the design of a calculation to correctly describe the mixing of different atomic asymptotes, and to give a correct balance between molecular bonding and exchange interactions. Examples considered include the dipole moment of the 2Delta state of NiH, which can help determine the mixture of 3d(8)4s(2) and 3d(9)4s(1) in the NiH wavefunction, and the bonding in CrO, where an equivalent description of the relative energies associated with the Cr 3d-3d atomic exchange and the Cr-O bond is important.

Bauschlicher, Charles W., Jr.↗

Nondestructive evaluation of adhesive bond strength using the stress wave factor technique

Acousto-ultrasonic nondestructive evaluation has been conducted to evaluate the adhesive bond strength between rubber and steel plates using the stress wave factor (SWF) measurement technique. Specimens with different bond strength were manufactured and tested using the SWF technique. Two approaches were used to define the SWF. One approach defines the SWF as the signal energy and the other approach defines the SWF as the square root of the zero moment of the frequency spectrum of the received signal. The strength of the rubber-steel adhesive joint was then evaluated using the destructive peel strength test method. It was observed that in both approaches higher values of the SWF measurements correspond to higher values of the peel strength test data. Therefore, these results show that the stress wave factor technique has the potential of being used in quality assurance of the adhesive bond strength between rubber and steel substrates.

Dos Reis, Henrique L. M.↗

Stress ratio effect on cyclic debonding in adhesively bonded composite joints

A study was conducted to investigate the stress ratio effect on cyclic debond growth behavior in adhesively bonded composite joints. The system studied consisted of graphite/epoxy adherends bonded with a toughened epoxy adhesive. This study showed that the strain energy release rate range was the driving factor for cyclic debonding of the tested bonded system when subjected to cyclic loads with different stress ratios for both mode I and mixed mode I-II loadings.

Mall, S.↗

The use of fluoroepoxy compounds as adhesives to bond fluoroplastics without any surface treatment

The use of fluoroepoxy compounds as adhesives to bond fluoroplastics was investigated. Fluoroepoxy compounds with a F-content higher than 46 percent were able to bond a highly fluorinated plastic such as Teflon PTFE (76 percent F) to give a respectable bond strength without any surface treatment. The advantage of the fluoroepoxy adhesive vanished when applied to a less fluorinated plastic such as Tefzel which contains 55 percent fluorine. Among the curing agents explored, octafluorooctamethylenediamine showed its potential as a cocuring agent for improving both the viscosity of the compound and the flexibility of the cured product.

Lee, Sheng Yen↗

Strong, Low-Resistance Bonds For AMTEC Electrodes

Heat of operating cell helps form contacts. Strong, low-electrical-resistance contacts between elements of current-collection grid in alkali-metal thermoelectric converter (AMTEC) cell obtained by simple in-place thermocompression bonding. Bonds formed between porous electrode of molybdenum film, nickel or cobalt strips overlying film, and molybdenum tie wires running at right angles to strips. Bonding method also works on films of tungsten or tungsten/platinum.

Williams, Roger M.↗

Bonding Gauges To Carbon/Carbon Composites

Thermal-expansion properties modified to prevent bonds from failing. Proposed transition layer deposited between substrate and strain or temperature gauge to be bonded to substrate. Intended particularly for gauges that must operate at temperatures above 600 degrees F (320 degrees C) and substrates like fiber-reinforced carbon/carbon composites. Reduces stress caused by difference between thermal expansions of gauge and substrate materials. Without transition layer, stress often weakens or breaks bond.

Lemcoe, M. M.↗

A study on thermal barrier coatings including thermal expansion mismatch and bond coat oxidation

The present investigation deals with a plasma-sprayed thermal barrier coating (TBC) intended for high temperature applications to advanced gas turbine blades. Typically, this type of coating system consists of a zirconia-yttria ceramic layer with a nickel-chromium-aluminum bond coat on a superalloy substrate. The problem on hand is a complex one due to the fact that bond coat oxidation and thermal mismatch occur in the TBC. Cracking in the TBC has also been experimentally illustrated. A clearer understanding of the mechanical behavior of the TBC is investigated. The stress states in a model thermal barrier coating as it cools down in air is studied. The powerful finite element method was utilized to model a coating cylindrical specimen. Four successively refined finite element models were developed. Some results obtained using the first two models have been reported previously. The major accomplishment is the successful development of an elastic TBC finite element model known as TBCG with interface geometry between the ceramic layer and the bond coat. An equally important milestone is the near-completion of the new elastic-plastic TBC finite element model called TBCGEP which yielded initial results. Representative results are presented.

Chang, George C.↗

Determining bonding, thickness, and density via thermal wave impedance NDE

Bonding, density, and thickness of coatings have a vital effect on their performance in many applications. Pioneering development work on thermal wave nondestructive evaluation (NDE) methods during the past 25 years has resulted in an array of useful techniques for performing bonding, density, and thickness measurements in a practical shop environment. The most useful thermal wave methods for this purpose are based on thermal wave surface impedance measurement or scanning. A pulse of heat from either a thermal transducer or a hot gas pulse is projected onto the surface, and the resulting temperature response is analyzed to unfold the bonding, density, and thickness of the coating. An advanced emissivity independent infrared method was applied to detect the temperature response. These methods were recently completely computerized and can automatically provide information on coating quality in near real-time using the proper equipment. Complex shapes such as turbine blades can be scanned. Microscopic inhomogeneities such as microstructural differences and small, normal, isolated voids do not cause problems but are seen as slight differences in the bulk thermal properties. Test objects with rough surfaces can be effectively nondestructively evaluated using proper thermal surface impedance methods. Some of the basic principles involved, as well as metallographic results illustrating the ability of the thermal wave surface impedance method to detect natural nonbonds under a two-layer thermally sprayed coating, will be presented.

Green, D. R.↗

Investigations of bonded and curved microchannel plate stacks

The technique of fusing, or bonding, individual microchannel plate (MCP) stacks together offers the possibility of improving the uniformity of MCP stack operating characteristics and provides a convenient monolithic format. Here, the effectiveness of bonded MCP stacks and stacks of MCPs with curved surfaces is investigated to determine if MCP requirements for future astrophysical detectors can be achieved. The results show that both configurations give superior MCP performance characteristics. However, some problems remain with regard to the fabrication of bonded MCP stacks resulting in poor flat field characteristics and increased background.

Siegmund, O. H. W.↗

Test Data of Flow Field of Shuttle SRM Nozzle Joint with Bond Defects, Using Unheated Air

The nozzle-to-case joint on the Shuttle SRM (as redesigned after the Challenger accident) features an adhesive sealant filling and bonding the joint, with a wiper O-ring to prevent the adhesive from reaching and disabling the closure O-ring. Flawless implementation of that joint design would ensure that hot, corrosive propellant combustion gases never reach the closure O-ring. However, understanding the flow field related to bonding defects is prudent. A comprehensive test program was conducted to quantify such flow fields and associated heating environments. A two-dimensional, full-scale model represented 65 inches of the nozzle joint, using unheated air as the test medium, in a blowdown mode. Geometry variations modeled RSRM assembly tolerances, and two types of bonding defects: pullaways and blowholes. A range of the magnitude of each type defect was tested. Also a range of operational parameters was tested, representative of the RSRM flow environment, including duplication of RSRM Mach and Reynolds numbers. Extensive instrumentation was provided to quantify pressures, heat rates, and velocities. The resulting data established that larger geometric defects cause larger pressure and larger heating, at the closure O-ring region. Velocity trends were not so straight-forward. Variations in assembly tolerances did not generally affect flow fields or heating. Operational parameters affected flow fields and heating as might be expected, increasing density or velocity increased heating. Complete details of this test effort are presented.

Hair, Leroy M.↗

Tensile behavior of bonded scarf joints between composite adherends

Tensile tests of bonded scarf joints indicate that shallow angle joints are sensitive to slight adherend tip bluntness. For scarf angles ranging from 9.2 to 1.1 degrees stress concentrations from blunt adherend tips significantly limit the increased strength expected from larger bond area. The bonded joints fail by two failure modes depending on the scarf angle. Although most of the joints in this study were scarfed by a surface grinder, small angle scarfs can be cut very accurately with a hand held rotary bur.

Adkins, David W.↗

Theoretical study of the bonding in LaFe(2+), LaRu(2+) and YRu(2+)

The bonding in LaFe(2+) and LaRu(2+) involves nearly equal contributions from La(+) and La(2+). The second IP of Y is larger than that of La and this leads to predominantly Y(+) + Ru(+) character in the YRu(2+) wavefunction. The remarkable stability of these systems derives from multiple d-d bonds that lead to a bond-order of between two and three. Thus the ground states of these dications, which have relatively deep molecular wells and large barriers to dissociation, have essentially infinite lifetimes with respect to unimolecular decay.

Bauschlicher, Charles W., Jr.↗

Measurement of the intrinsic bond strength of brittle thin films on flexible substrates

The brittle cracking and subsequent debonding of nickel films deposited on polymer substrates subjected to uniaxial strain is investigated. Stress analyses for a film/substrate system are performed. Based on the analysis, the interfacial bond strength between brittle thin films and flexible substrates can be evaluated in terms of the tensile strength of the coating and the length of the largest segment that first debonds. Experiments were performed on Ni films with different thicknesses evaporated on polyethylene terephthalate substrates and the intrinsic bond strength was evaluated. The interfacial bond strengths were shown to be relatively independent of the film thickness for the range studied.

Guo, Q.↗

Acousto-optic signature analysis for inspection of the orbiter thermal protection tile bonds

The goal of this research is to develop a viable NDE technique for the inspection of orbiter thermal protection system (TPS) tile bonds. Phase 2, discussed here, concentrated on developing an empirical understanding of the bonded and unbonded vibration signatures of acreage tiles. Controlled experiments in the laboratory have provided useful information on the dynamic response of TPS tiles. It has been shown that several signatures are common to all the pedigree tiles. This degree of consistency in the tile-SIP (strain isolation pad) dynamic response proves that an unbond can be detected for a known tile and establish the basis for extending the analysis capability to arbitrary tiles for which there are no historical data. The field tests of the noncontacting laser acoustic sensor system, conducted at the Kennedy Space Center (KSC), investigated the vibrational environment of the Orbiter Processing Facility (OPF) and its effect on the measurement and analysis techniques being developed. The data collected showed that for orbiter locations, such as the body flap and elevon, the data analysis scheme, and/or the sensor, will require modification to accommodate the ambient motion. Several methods were identified for accomplishing this, and a solution is seen as readily achievable. It was established that the tile response was similar to that observed in the laboratory. Of most importance, however, is that the field environment will not affect the physics of the dynamic response that is related to bond condition. All of this information is fundamental to any future design and development of a prototype system.

Rodriguez, Julio G.↗

Adhesive bond evaluation using phase sensitive detection techniques

Quadrature phase detection techniques have been used to monitor the amplitude and phase of a toneburst ultrasonic wave normally reflected from adhesively-bonded steel/rubber interface. The measured phase change values of the reflected signals were found to correlate with variations in sample preparation. It was determined that measured phase shift changes were larger for samples with weaker bonds as manifested by smaller measured values of the applied tensile loads at failure. A model calculation which incorporates the concept of interfacial strength into the usual problem of wave propagation in multi-layered isotropic elastic media was used to deduce a bond-quality parameter from an experimentally measured phase shift.

Smith, Alphonso C.↗

Bond-orientational order in liquid Si

Bond-orientational order in liquid Si via Monte Carlo simulation in conjuncation with empirical two- and three-body potentials of the form proposed by Stillinger and Weber are studied. Bond-orientational order (BOO) is described in terms of combinations of spherical harmonic functions. Liquid Si is found to have pronounced short-range BOO corresponding to l = 3, as expected for a structure with local tetrahedral order. No long-range BOO is found either in the equilibrium or the supercooled liquid. When the three-body potential is artificially removed, the tetrahedral bond-orientation order disappears and the liquid assumes a close-packed structure.

Wang, Z. Q.↗

Theoretical study of the bonding of Sc, Y, and La singly charged and dipositive ions to C2H2, C2H4, and C3H6

The interaction of the Sc and Y singly-charged and dipositive ions with C2H2, C2H4, and C3H6 is studied using electronic structure calculations that include high levels of electron correlation. These results are compared with comparable calculations performed previously for La(+) and La(2+). For C2H2 and C2H4, all three metal ions insert into the C-C pi bond, making a three-membered ring. The optimal structures for the MC3H6(+) ions all involve rearrangement to make a four-membered ring. The strength of the metal-ligand bond for the singly charged ions follows the order La greater than Sc equal to about Y. In contrast, the bonds involving the dipositive ions are electrostatic, so that the binding energy increases as the size of the ion decreases, leading to the trend Sc greater than Y greater than La.

Bauschlicher, Charles W., Jr.↗

Bond verification of space shuttle tiles using time-domain techniques

The application of a high-resolution time-domain reflectometer (TDR) to the detection of faulty bonds in space shuttle tile structures is discussed. Experimental measurements on bonded and debonded tiles are included to demonstrate the technique. Computer simulations were used to verify the experimental results. A criterion for bond verification is proposed.

Bennia, Abdelhak↗