Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Local atomic structure and Ni nanophase segregation in Zn 1-x Ni x S thin films

Here, the local atomic structure of Zn 1-x Ni x S thin films was investigated using X-ray absorption spectroscopy. The films were grown using RF-sputtering at atomic concentrations x = 0.00, x = 0.04, x = 0.08 and x = 0.14. X-ray diffraction shows that the lattice parameter contracts with increasing Ni concentration, consistent with the smaller atomic radii of Ni compared to that one of Zn. Optical absorption reveals a reduction of the bandgap as Ni concentration increases, except for sample x = 0.14 where a complex behavior is observed. Results from X-ray absorption near edge structure (XANES) spectroscopy indicate a shift in the valence state of Ni for the x = 0.14 sample. The analysis of the extended X-ray absorption fine structure (EXAFS) spectra indicate a contraction of ~0.7 Å in the Ni–S bond distance when compared to the Zn–S bond length, which generates local lattice distortions and an increment of the static disorder as the Ni concentration increases. The EXAFS results for sample x = 0.14 show the presence of a Zn 1-x Ni x S phase and a nanoscopic metallic Ni phase with domain sizes below the diffraction limit. These results reveal that the local atomic structure differs in a significant manner from the average crystalline structure, implying its importance for the determination of the electronic properties of this material.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Anatase TiO 2 Surface Hydration: Infrared Vibrational Assignment and Facet-Specific Stability

Anatase TiO 2 nanoparticles support a subtle diversity of surface aqua and hydroxy coordination environments that are characteristic of distinct facets and defect sites. The disparate properties and stability of each molecularly or dissociatively absorbed water environment may provide unique reactivity for facet- and site-selective atomic layer deposition (ALD). Here we probe the temperature-dependent and facet-specific stretching frequency and stability of surface hydroxyls on faceted anatase TiO 2 nanoparticles via in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Well-defined truncated octahedra, disks, and rods fabricated through hydrothermal synthesis present dominant (101), (001), and (010) facets, respectively. The selective dehydration of discrete local coordination environments as a function of temperature provides a potential pathway to site-selective and facet-selective ALD on metal oxide nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Acid–Base Chemistry of a Model IrO 2 Catalytic Interface

Iridium oxide (IrO 2 ) is one of the most efficient catalytic materials for the oxygen evolution reaction (OER), yet the atomic scale structure of its aqueous interface is largely unknown. Herein, the hydration structure, proton transfer mechanisms and acid-base properties of the rutile IrO 2 (110)-water interface are investigated using ab-initio based deep neural-network potentials and enhanced sampling simulations. The proton affinities of the different surface sites are characterized by calculating their acid dissociation constants, which yield a point of zero-charge in good agreement with experiments. A large fraction (≈ 80%) of adsorbed water dissociation is observed, together with a short lifetime (≈ 0.5 ns) of the resulting terminal hydroxy groups, due to rapid proton exchanges between adsorbed H 2 O and adjacent OH species. As a result, this rapid surface proton transfer supports the suggestion that the rate-determining step in the OER may not involve proton transfer across the double layer into solution, as indicated by recent experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Automated Construction of Artificial Lattice Structures with Designer Electronic States

Manipulating matter with a scanning tunneling microscope (STM) enables the creation of atomically defined artificial structures that host designer quantum states. However, the time-consuming nature of the manipulation process, coupled with the sensitivity of the STM tip, constrains the exploration of diverse configurations and limits the size of the designed features. In this study, we present a reinforcement learning (RL)-based framework for creating artificial structures by spatially manipulating carbon monoxide (CO) molecules on a copper substrate by using the STM tip. The automated workflow combines molecule detection and manipulation, employing deep-learning-based object detection to locate CO molecules and linear assignment algorithms to allocate these molecules to designated target sites. We initially perform molecule maneuvering based on randomized parameter sampling for sample bias, tunneling current set point, and manipulation speed. This data set is then structured into an action trajectory used to train an RL agent. The model is subsequently deployed on the STM for real-time fine-tuning of the manipulation parameters during structure construction. Our approach incorporates path-planning protocols coupled with active drift compensation to enable atomically precise fabrication of structures with significantly reduced human input while realizing larger-scale artificial lattices with the desired electronic properties. Furthermore, using our approach, we demonstrate the automated construction of an extended artificial graphene lattice and confirm the existence of a characteristic Dirac point in its electronic structure. Further challenges regarding the RL-based structural assembly scalability are discussed.

Algorithms↗
DOE OSTI2026

Polarization Control via Artificial Optical Nonlinearity in Dielectric Metasurfaces

Nonlinear optical phenomena are generally governed by geometry in matter systems, as they depend on the spatial arrangement of atoms within materials or molecules. Metasurfaces, through precisely designed geometries on a subwavelength scale, allow the optical response of a material to be tailored far beyond its natural properties. Therefore, metasurfaces are highly appealing for enabling the engineering of nonlinear optical interactions. Current studies of nonlinear metasurfaces predominantly focus on the phase control of the generated light. Nonetheless, investigating the tensorial nature of the nonlinearity of metasurfaces and its effect on the polarization of the generated light is critical to fully unlocking a range of applications, such as nonlinear vector beam generation and nonlinear polarization imaging. Here, we study the artificial optical nonlinearity of a dielectric metasurface originating from its meta-atom symmetry and describe the third-order nonlinear behavior by considering the polarization degree of freedom. We establish an effective nonlinear medium model that serves as a design toolbox for developing amorphous silicon-based geometric metasurfaces with customizable features for third-harmonic generation. We further extract quantitative values of the artificial nonlinear susceptibility tensor elements related to the investigated nonlinear process and geometry. The implemented functional devices demonstrate the versatility of dielectric metasurfaces in shaping the emitted light in terms of amplitude, phase, and polarization for the precise engineering of advanced nonlinear architectures targeting applications in nonlinear imaging and complex light generation.

Diffraction↗
DOE OSTI2022

Unveiling the complex configurational landscape of the intralayer cavities in a crystalline carbon nitride

The in-depth understanding of the reported photoelectrochemical properties of the layered carbon nitride, poly(triazine imide)/LiCl (PTI/LiCl), has been limited by the apparent disorder of the Li/H atoms within its framework. To understand and resolve the current structural ambiguities, an optimized one-step flux synthesis (470 °C, 36 h, LiCl/KCl flux) was used to prepare PTI/LiCl and deuterated-PTI/LiCl in high purity. Its structure was characterized by a combination of neutron/X-ray diffraction and transmission electron microscopy. The range of possible Li/H atomic configurations was enumerated for the first time and, combined with total energy calculations, reveals a more complex energetic landscape than previously considered. Experimental data were fitted against all possible structural models, exhibiting the most consistency with a new orthorhombic model (Sp. Grp. Ama2) that also has the lowest total energy. In addition, a new Cu(I)-containing PTI (PTI/CuCl) was prepared with the more strongly scattering Cu(I) cations in place of Li, and most closely matching with the partially-disorder structure in Cmc2 1 . Thus, a complex configurational landscape of PTI is revealed to consist of a number of ordered crystalline structures that are new potential synthetic targets, such as with the use of metal-exchange reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Magnetic order in a quenched-high-temperature-phase of Cu-doped MnBi

Permanent magnets are of great importance due to their vast applications. MnBi has been proposed to be a potential permanent magnet that can be widely used while past efforts have been focused on optimizing the ferromagnetic low-temperature phase of MnBi. Herein, we report a series of new materials, Cu x Mn 1–x Bi, crystallizing in a quenched high-temperature-phase (QHTP) MnBi-related structure. In this study, we synthesized single crystals of Cu x Mn 1–x Bi and found that they crystallize in an unreported trigonal structure (P$\bar{3}$1c). Magnetic properties measurements imply high-temperature antiferromagnetic (AFM) ordering and low-temperature ferromagnetic or ferrimagnetic (FM/FiM) ordering. By analyzing the doping effect on crystal structure and magnetic properties, we established a magnetic phase diagram for Cu-doped MnBi and attributed the AFM and FM/FiM to two different atomic sites of Mn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Isotope effects on the high pressure viscosity of liquid water measured by differential dynamic microscopy

In this paper, differential dynamic microscopy is performed in diamond anvil cells to measure the viscosity of water along the 24 °C isotherm to high-pressure by determination of the tracer diffusion coefficient of monodisperse silica spheres of known diameter and application of the Stokes-Einstein-Sutherland equation. This technique allows liquid samples to be compressed to greater pressure prior to freezing than with other viscometry methods. The highest-pressure measurement was made at 1.67 GPa, considerably deeper into the supercompressed regime than previously reported. The effect of isotopic composition is investigated with samples of normal water, heavy water, and partially deuterated water. When data below 0.25 GPa are excluded a free volume model fits the observed viscosities well yielding a theoretical glass transition density close to that observed in very-high-density amorphous ice. The improved fit above 0.25 GPa coincides with the loss of other anomalous behaviors in liquid water caused by hydrogen bonding and represents a transition to properties closer to those of a simple liquid.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Beam-driven dynamics of aluminium dopants in graphene

Abstract Substituting heteroatoms into graphene can tune its properties for applications ranging from catalysis to spintronics. The further recent discovery that covalent impurities in graphene can be manipulated at atomic precision using a focused electron beam may open avenues towards sub-nanometer device architectures. However, the preparation of clean samples with a high density of dopants is still very challenging. Here, we report vacancy-mediated substitution of aluminium into laser-cleaned graphene, and without removal from our ultra-high vacuum apparatus, study their dynamics under 60 keV electron irradiation using aberration-corrected scanning transmission electron microscopy and spectroscopy. Three- and four-coordinated Al sites are identified, showing excellent agreement with ab initio predictions including binding energies and electron energy loss spectrum simulations. We show that the direct exchange of carbon and aluminium atoms predicted earlier occurs under electron irradiation, although unexpectedly it is less probable than the same process for silicon. We also observe a previously unknown nitrogen–aluminium exchange that occurs at Al–N double-dopant sites at graphene divacancies created by our plasma treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Rare isotope-containing diamond colour centres for fundamental symmetry tests

Detecting a non-zero electric dipole moment in a particle would unambiguously signify physics beyond the Standard Model. A potential pathway towards this is the detection of a nuclear Schiff moment, the magnitude of which is enhanced by the presence of nuclear octupole deformation. However, due to the low production rate of isotopes featuring such ‘pear-shaped’ nuclei, capturing, detecting and manipulating them efficiently is a crucial prerequisite. Incorporating them into synthetic diamond optical crystals can produce defects with defined, molecule-like structures and isolated electronic states within the diamond band gap, increasing capture efficiency, enabling repeated probing of even a single atom and producing narrow optical linewidths. In this study, we used density functional theory to investigate the formation, structure and electronic properties of crystal defects in diamond containing 229 ⁢Pa, a rare isotope that is predicted to have an exceptionally strong nuclear octupole deformation. In addition, we identified and studied stable lanthanide-containing defects with similar electronic structures as non-radioactive proxies to aid in experimental methods. Our findings hold promise for the existence of such defects and can contribute to the development of a quantum information processing-inspired toolbox of techniques for studying rare isotopes.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

Simulations for x-ray imaging of wave-packet dynamics

Previous work on imaging wave-packet dynamics with x-ray scattering revealed that the scattering patterns deviate substantially from the notion of instantaneous momentum density of the wave packet. Here we show that scattering patterns can provide clear insights into the electron wave-packet dynamics if the final state of the scattered electron and the scattered photon momentum are determined simultaneously. The scattering probability is shown to be proportional to the modulus square of the Fourier transform of the instantaneous electronic spatial wave function weighted by the final state of the electron. Several cases for the choice of final state of the electron are explored. First, the case where the final state can be measured up to a given principal quantum number n and orbital angular momentum l are presented. Next, the case where the final states can only be determined up to a given energy is discussed. Lastly, the case of an initial wave packet consisting of a large amount of a known stationary state and a small amount of an unknown stationary state is examined. The scattering profile is used to determine the properties of the unknown state in the wave packet.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Electronic structures of a diagonally striped lattice: Multiple ( N - 1 ) -fold degenerate flat bands

We investigate the electronic structure of an interesting two-dimensional (2D) diagonally striped lattice (DSL). It consists of arrays of N different types of “atoms” or “molecules” with a fixed sequence in both horizontal and vertical directions. Using a tight-binding model, we show that the DSL (N>2) has the symmetry group Amm2 and Pmm2, and exhibits an oscillatory metallic and insulating phases for the odd- and even- N number, respectively. Some conventional 2D lattices, such as the Lieb lattice, can be related to the derivative DSL via vacancy formation by removing one type of atom in every other (N-1) row of the original DSL. Interestingly, there are multiple (N-1)-fold degenerate flat bands in one group of the derivative DSLs, which affords a unique platform for studying many-body physics. In addition to atomic and molecular lattices, we suggest other artificial DSLs, such as photonic and phononic, to be also constructed with possibly interesting properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Landau-Forbidden Quantum Criticality in Rydberg Quantum Simulators

The Landau-Ginzburg-Wilson theory of phase transitions precludes a continuous transition between two phases that spontaneously break distinct symmetries. However, quantum mechanical effects can intertwine the symmetries, giving rise to an exotic phenomenon called deconfined quantum criticality (DQC). Here, in this Letter, we study the ground state phase diagram of a one-dimensional array of individually trapped neutral atoms interacting strongly via Rydberg states, and demonstrate through extensive numerical simulations that it hosts a variety of symmetry-breaking phases and their transitions including DQC. We show how an enlarged, emergent continuous symmetry arises at the DQCs, which can be experimentally observed in the joint distribution of two distinct order parameters, obtained within measurement snapshots in the standard computational basis. Our findings highlight quantum simulators of Rydberg atoms not only as promising platforms to experimentally realize such exotic phenomena, but also as unique ones allowing access to physical properties not obtainable in traditional experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Quantifying uncertainty in high-throughput density functional theory: A comparison of AFLOW, Materials Project, and OQMD

A central challenge in high-throughput density functional theory (HT-DFT) calculations is selecting a combination of input parameters and postprocessing techniques that can be used across all materials classes, while also managing accuracy-cost tradeoffs. To investigate the effects of these parameter choices, we consolidate three large HT-DFT databases: Automatic-FLOW (AFLOW), the Materials Project (MP), and the Open Quantum Materials Database (OQMD), and compare reported properties across each pair of databases for materials calculated using the same initial crystal structure. We find that HT-DFT formation energies and volumes are generally more reproducible than band gaps and total magnetizations; for instance, a notable fraction of records disagree on whether a material is metallic (up to 7%) or magnetic (up to 15%). The variance between calculated properties is as high as 0.105 eV/atom (median relative absolute difference, or MRAD, of 6%) for formation energy, 0.65 Å 3 / atom (MRAD of 4%) for volume, 0.21 eV (MRAD of 9%) for band gap, and 0.15 μB/ formula unit (MRAD of 8%) for total magnetization, comparable to the differences between DFT and experiment. Here, we trace some of the larger discrepancies to choices involving pseudopotentials, the DFT + U formalism, and elemental reference states, and argue that further standardization of HT-DFT would be beneficial to reproducibility.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impacts of floating-point non-associativity on reproducibility for HPC and deep learning applications

Run to run variability in parallel programs caused by floating-point non-associativity has been known to significantly affect reproducibility in iterative algorithms, due to accumulating errors. Non-reproducibility can critically affect the efficiency and effectiveness of correctness testing for stochastic programs. Recently, the sensitivity of deep learning training and inference pipelines to floating-point non-associativity has been found to sometimes be extreme. It can prevent certification for commercial applications, accurate assessment of robustness and sensitivity, and bug detection. New approaches in scientific computing applications have coupled deep learning models with high-performance computing, leading to an aggravation of debugging and testing challenges. Here we perform an investigation of the statistical properties of floating-point non-associativity within modern parallel programming models, and analyze performance and productivity impacts of replacing atomic operations with deterministic alternatives on GPUs. We examine the recently-added deterministic options in PyTorch within the context of GPU deployment for deep learning, uncovering and quantifying the impacts of input parameters triggering run to run variability and reporting on the reliability and completeness of the documentation. Finally, we evaluate the strategy of exploiting automatic determinism that could be provided by deterministic hardware, using the Groq LPUTM accelerator for inference portions of the deep learning pipeline. We demonstrate the benefits that a hardware-based strategy can provide within reproducibility and correctness efforts.

Shanmugavelu, Sanjif↗
DOE OSTI2020

Direct observation of minibands in a twisted graphene/WS 2 bilayer

Stacking two-dimensional (2D) van der Waals materials with different interlayer atomic registry in a heterobilayer causes the formation of a long-range periodic superlattice that may bestow the heterostructure with properties such as new quantum fractal states or superconductivity. Recent optical measurements of transition metal dichalcogenide (TMD) heterobilayers have revealed the presence of hybridized interlayer electron-hole pair excitations at energies defined by the superlattice potential. The corresponding quasiparticle band structures, so-called minibands, have remained elusive, and no such features have been reported for heterobilayers composed of a TMD and another type of 2D material. We introduce a new x-ray capillary technology for performing microfocused angle-resolved photoemission spectroscopy with a spatial resolution of ~1 μm, and directly observe minibands at certain twist angles in mini Brillouin zones (mBZs). We discuss their origin in terms of initial and final state effects by analyzing their dispersion in distinct mBZs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Extension of the bright high-harmonic photon energy range via nonadiabatic critical phase matching

The concept of critical ionization fraction has been essential for high-harmonic generation, because it dictates the maximum driving laser intensity while preserving the phase matching of harmonics. In this work, we reveal a second, nonadiabatic critical ionization fraction, which substantially extends the phase-matched harmonic energy, arising because of the strong reshaping of the intense laser field in a gas plasma. We validate this understanding through a systematic comparison between experiment and theory for a wide range of laser conditions. In particular, the properties of the high-harmonic spectrum versus the laser intensity undergoes three distinctive scenarios: (i) coincidence with the single-atom cutoff, (ii) strong spectral extension, and (iii) spectral energy saturation. We present an analytical model that predicts the spectral extension and reveals the increasing importance of the nonadiabatic effects for mid-infrared lasers. These findings are important for the development of high-brightness soft x-ray sources for applications in spectroscopy and imaging.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Scalable bottom-up synthesis of Co-Ni–doped graphene

Introducing heteroatoms into graphene is a powerful strategy to modulate its catalytic, electronic, and magnetic properties. At variance with the cases of nitrogen (N)– and boron (B)–doped graphene, a scalable method for incorporating transition metal atoms in the carbon (C) mesh is currently lacking, limiting the applicative interest of model system studies. This work presents a during-growth synthesis enabling the incorporation of cobalt (Co) alongside nickel (Ni) atoms in graphene on a Ni(111) substrate. Single atoms are covalently stabilized within graphene double vacancies, with a Co load ranging from 0.07 to 0.22% relative to C atoms, controllable by synthesis parameters. Structural characterization involves variable-temperature scanning tunneling microscopy and ab initio calculations. The Co- and Ni-codoped layer is transferred onto a transmission electron microscopy grid, confirming stability through scanning transmission electron microscopy and electron energy loss spectroscopy. This method holds promise for applications in spintronics, gas sensing, electrochemistry and catalysis, and potential extension to graphene incorporation of similar metals.

Science & Technology - Other Topics↗