Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Water dynamics in cement paste at early age prepared with pozzolanic volcanic ash and Ordinary Portland Cement using quasielastic neutron scattering

Early age hydration kinetics of Portland cement with pozzolanic volcanic ash was examined using quasielastic neutron scattering. Volcanic ash consisting of two different particle sizes was used to prepare cement pastes with different ratios of Portland cement to volcanic ash. The concentration of the volcanic ash played a major role in the bound water index and self-diffusion coefficients of hydration water confined in the cement paste. An increase in the particle size of the volcanic ash affected the degree of hydration by allowing more free and mobile water in the gel pores, suggesting that volcanic ash may not have completely reacted during the experimental time frame. This study shows that the particle size along with variation in volcanic ash composition governs the early age hydration process in volcanic ash cements.

36 MATERIALS SCIENCE↗

Effects of Co doping on the structure and physicochemical properties of hausmannite (Mn 3 O 4 ) and its transformation during aging

Hausmannite is a common low-valence manganese oxide mineral with a distorted spinel structure in surficial sediments. Although natural Mn oxides often contain various transition metal (TM) impurities, few studies have addressed the substitution mechanisms of TMs, such as cobalt (Co), with hausmannite and induced changes in the mineral physicochemical properties. In this study, Co-doped hausmannites with final Co/Mn molar ratios of 0.05 and 0.11 were synthesized and characterized by wet chemical analysis, powder X-ray diffraction (XRD), Fourier transformed infrared spectra (FTIR), high resolution transmission electron microscope (HRTEM), X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure spectroscopy (XAFS). Co-doped samples have larger crystallite sizes and smaller specific surface areas than those of the hausmannite without Co. The Co cations exist in a mixed-valence of +3 and + 2. Powder XRD and acid dissolution experiments indicate that Co incorporates into the mineral structures, and increases the mineral structural stability. Co K-edge extended X-ray adsorption fine structure (EXAFS) analysis demonstrates that Co likely substitutes for lattice Mn(III). After aging at room temperature for three years, 14.1 ± 1.9% of pure hausmannite is transformed to manganite while only 2.6 ± 0.7% of manganite appears in the aged Co-doped sample with an initial Co/Mn molar ratio of 0.10. Finally, these results provide new insights into the incorporation mechanisms of TMs into low valence Mn oxides, and the stability of these minerals in natural environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials aging at the mesoscale: Kinetics of thermal, stress, radiation activations

The complexity of materials aging may be seen as a result of the interplay between several activation processes operating on multiple spatial and temporal scales. Though the disciplines involved may seem disparate at first, material aging fundamentally could be linked by the same set of underlying activations and responses of the system. We view how recent studies of shear-induced deformation and rheological flow initiated in the soft-matter community can be leveraged to probe the mechanisms of radiation damage in nuclear materials. Bridging these two traditionally separate areas of research demonstrates the emerging notions of mesoscale science as a research frontier concerned with linking macroscale behavior to microscale processes in driven systems. We believe the combining of microstructure-sensitive measurements with fundamental theories and mechanism-specific simulations is crucial to addressing metastable materials responses of strongly activated states.

36 MATERIALS SCIENCE↗

Kidney function and blood pressure in preschool-aged children exposed to cadmium and arsenic - potential alleviation by selenium

Background: Early-life exposure to toxic compounds may cause long-lasting health effects, but few studies have investigated effects of childhood exposure to nephrotoxic metals on kidney and cardiovascular function. Objectives: To assess effects of exposure to arsenic and cadmium on kidney function and blood pressure in pre-school-aged children, and potential protection by selenium. Methods: This cross-sectional study was part of the 4.5 years of age (range: 4.4–5.4 years) follow-up of the children from a supplementation trial in pregnancy (MINIMat) in rural Bangladesh, and nested studies on early-life metal exposures. Exposure to arsenic, cadmium and selenium from food and drinking water was assessed by concentrations in children's urine, measured by ICP-MS. Kidney function was assessed by the estimated glomerular filtration rate (eGFR, n=1106), calculated from serum cystatin C, and by kidney volume, measured by ultrasound (n=375). Systolic and diastolic blood pressure was measured (n=1356) after five minutes rest. Results: Multivariable-adjusted regression analyzes showed that exposure to cadmium, but not arsenic, was inversely associated with eGFR, particularly in girls. A 0.5 µg/L increase in urinary cadmium among the girls (above spline knot at 0.12) was associated with a decrease in eGFR of 2.6 ml/min/1.73 m{sup 2}, corresponding to 0.2SD (p=0.022). A slightly weaker inverse association with cadmium was also indicated for kidney volume, but no significant associations were found with blood pressure. Stratifying on children's urinary selenium (below or above median of 12.6 µg/L) showed a three times stronger inverse association of U-Cd with eGFR (all children) in the lower selenium stratum (B=−2.8; 95% CI: −5.5, −0.20; p=0.035), compared to those with higher selenium (B=−0.79; 95% CI: −3.0, 1.4; p=0.49). Conclusions: Childhood cadmium exposure seems to adversely affect kidney function, but not blood pressure, in this population of young children in rural Bangladesh. Better selenium status appears to be protective. However, it is important to follow up these children to assess potential long-term consequences of these findings. - Highlights: • Bangladesh has high levels of arsenic and cadmium in drinking water and food • We assessed toxic exposure, kidney and cardiovascular function in Bangladeshi children • Cadmium appeared to decrease estimated glomerular filtration rate in girls • These effects were somewhat alleviated by selenium.

54 ENVIRONMENTAL SCIENCES↗

Metals exposure and risk of small-for-gestational age birth in a Canadian birth cohort: The MIREC study

Background: Lead, mercury, cadmium and arsenic are some of the most common toxic metals to which Canadians are exposed. The effect of exposure to current low levels of toxic metals on fetal growth restriction is unknown. Objective: The aim of this study was to examine relationships between exposure to lead, mercury, cadmium and arsenic during pregnancy, and risk of small for gestational age (SGA) birth. Methods: Lead, mercury, cadmium and arsenic levels were measured in blood samples from the first and third trimesters in 1835 pregnant women from across Canada. Arsenic species in first trimester urine were also assessed. Relative risks and 95% confidence intervals were estimated using log binomial multivariate regression. Important covariates including maternal age, parity, pre-pregnancy BMI, and smoking, were considered in the analysis. An exploratory analysis was performed to examine potential effect modification of these relationships by single nucleotide polymorphisms (SNPs) in GSTP1 and GSTO1 genes. Results: No association was found between blood lead, cadmium or arsenic and risk for SGA. We observed an increased risk for SGA for the highest compared to the lowest tertile of exposure for mercury (>1.6 µg/L, RR=1.56.; 95% CI=1.04–2.58) and arsenobetaine (>2.25 µg/L, RR=1.65; 95% CI=1.10–2.47) after adjustment for the effects of parity and smoking. A statistically significant interaction was observed in the relationship between dimethylarsinic acid (DMA) levels in urinary arsenic and SGA between strata of GSTO1 A104A (p for interaction=0.02). A marginally significant interaction was observed in the relationship between blood lead and SGA between strata of GSTP1 A114V (p for interaction=0.06). Conclusions: These results suggest a small increase in risk for SGA in infants born to women exposed to mercury and arsenic. Given the conflicting evidence in the literature this warrants further investigation in other pregnant populations. - Highlights: • Metals measured in blood or urine of pregnant women. • No association between blood lead, cadmium or arsenic and SGA. • Small increased risk for highest tertile of blood mercury. • Small increased risk for highest tertile of urinary arsenobetaine. • Further research needed to confirm observed associations.

54 ENVIRONMENTAL SCIENCES↗

Persistent organic pollutants as predictors of increased FSH:LH ratio in naturally cycling, reproductive age women

Highlights: • Endocrine disrupting chemicals pose a threat to female fecundity and reproduction. • Examined organochlorines and a marker of ovarian responsivity, FSH:LH ratio. • Increasing concentrations of estrogenic PCBs predict FSH:LH ratio > 2. • PCB congeners related to airborne exposure are associated with FSH:LH ratio > 2. Although several recent studies suggest endocrine disrupting compounds, such as polychlorinated biphenyls (PCBs), dichlorodiphenyldichloroethylene (p,p′, DDE), and hexachlorobenzene (HCB), target different organs and systems in the body, their impact on female reproductive function in humans is not well characterized. We seek to determine the relationship between several known endocrine disrupting compounds and a marker of ovarian responsivity, the FSH:LH ratio (higher ratio indicates less ovarian responsivity). For this analysis, 169 naturally cycling women between 21 and 38 years of age completed interviews and had their blood drawn on day 3 of their menstrual cycle for analyses of toxicants, gonadal sex hormones (E{sub 2} and P{sub 4}), and gonadotropins (FSH and LH). PCB congeners were classified into five groups based on their environmental persistence, distribution in human tissue, and toxicological action, reflecting the structure, mechanism, and known biological activity of individual PCB congeners. For every unit (ppb) increase in the level of the estrogenic PCB group, there was a 5-fold greater risk of a FSH:LH ratio ≥ 2, controlling for individual differences in age, percent body fat, cycle day 3 estradiol levels, parity, alcohol use and cigarette smoking in the past year (exp[ß] = 5; p = ≤0.01). PCB congeners identified as estrogenic were analyzed individually, and, of the 19 potentially estrogenic congeners, five were significantly, and positively related to an increased FSH:LH ratio. Four of these congeners are non-persistent, easily volatilize in the environment, and are easily metabolized, and hence, are indicative of very recent or current exposure. p,p′-DDE and HCB were not associated with FSH:LH ratio. We find a clinical indicator of ovarian responsivity, FSH:LH ratio, is associated with a specific group of estrogenic PCBs. These congeners may become airborne when they volatilize from dredged PCB-contaminated soil or from indoor PCB-containing window caulk and sealants in older buildings leading to inhalation exposure. PCB exposure, particularly to non-persistent, estrogenic congeners, may pose an unrecognized threat to female fecundity within the general population.

54 ENVIRONMENTAL SCIENCES↗

U-Pb zircon age constraints on the earliest eruptions of the Deccan Large Igneous Province, Malwa Plateau, India

Climate instability driven by emission of volatiles during emplacement of large igneous provinces (LIPs) is frequently invoked as a potential cause of mass extinctions. However, documenting this process in the geologic record requires a holistic understanding of eruption rates, the location of eruptive centers, and potential sources of climate-changing volatiles. We present new chemical abrasion–isotope dilution–thermal ionization mass spectrometry (CA-ID-TIMS) U-Pb zircon geochronology from Malwa Plateau basalts on the northern margin of the Deccan LIP, India. These basalts have been previously interpreted as either an extension of the province's main volcanic stratigraphy or as an independent eruptive center active up to millions of years prior to the main eruptive phase. Our data instead demonstrate that the lower Malwa Plateau basalts are temporally correlative with the first pulse of Deccan volcanism and provide new constraints on its initiation and duration. Paleomagnetic data further indicate that upper Malwa Plateau basalts may be age-equivalent to the second, third, and fourth pulses of Deccan volcanism. The relative thicknesses of age-equivalent packages of basalt are consistent with eruption of the Deccan LIP from a southward-migrating eruptive center. The first eruptive pulse is coeval with a ~200 kyr Late Maastrichtian warming event preserved globally in contemporaneous stratigraphic sections. We propose that the first pulse of Deccan magmatism was more voluminous in the north, where it erupted through organic-rich sedimentary rocks of the Narmada-Tapti rift basin. Thermal metamorphism of these sediments could have been a source of sufficient CO 2 to drive the Late Maastrichtian warming event, which if true would reconcile the apparent dampened warming signals associated with later Deccan eruptive pulses.

58 GEOSCIENCES↗

A collective trigger for widespread planetesimal formation revealed by accretion ages

The formation of planetesimals was an integral part of the cascading series of processes that built the terrestrial planets. To illuminate planetesimal formation, here we develop a refined thermal evolution model to calculate the formation ages of meteorite parent planetesimals. This model includes chemical reactions and phase changes during heating, as well as natural variations in the proportions of the constituent phases of these planetesimals. We find that the parent bodies of non-carbonaceous (NC) and carbonaceous (CC) iron meteorites start forming at very similar times ( ∼ 0.95 Myr after calcium-aluminium-rich inclusion [CAI] formation) and occupy overlapping time windows. NC and CC chondrite parent bodies formed later during non-overlapping periods. We combine these ages with proportions of isotopic end-members we recover from mixing models to construct records of motion throughout the protoplanetary disk. These records argue that NC and CC material traversed the barrier in the disk after ∼ 0.95 Myr after CAI formation. The onset of this motion coincided with planetesimal formation, indicating that the phenomenon that drove motion also triggered planetesimal formation. We argue that this feature also served as the semi-permeable barrier in the disk. Although its identity is uncertain, the effects this phenomenon had on the timing of planetesimal formation and motion through the disk can now serve as constraints on models of disk evolution. Models that reproduce these effects would elucidate the nature and implications of this phenomenon, which is key to unlocking a holistic model of terrestrial planet building.

Astronomy and AstroPhysics↗

Degradation and Modeling of Large-Format Commercial Lithium-Ion Cells as a Function of Chemistry, Design, and Aging Conditions

Demand for large-format (>10 Ah) lithium-ion batteries has increased substantially in recent years, due to the growth of both electric vehicle and stationary energy storage markets. The economics of these applications is sensitive to the lifetime of the batteries, and end-of-life can either be due to energy or power limitations. Despite this, there is little information from cell manufacturers on the sensitivity of cell degradation to environmental conditions or battery use. This work reports accelerated aging test data from four commercial large-format lithium-ion batteries from three manufacturers, with varying design (thickness, casings, ...), chemistry (lithium-iron-phosphate (LFP) or lithium-nickel-manganese-cobalt-oxide positive electrodes (NMC), with graphite (Gr) negative electrodes), and capacity (50 to 250 Amp hours). The tested LFP|Gr cell is found to be relatively insensitive to cycling conditions like temperature or voltage window, while NMC|Gr cells have varying sensitivity. Degradation trends are further investigated by training predictive models: simple polynomial trend lines, a semi-empirical reduced-order model, and an empirical reduced-order model identified using machine-learning based on symbolic regression. Calendar and cycle life are simulated over a variety of conditions to directly compare the various batteries. Cell size and thickness are found to substantially impact sensitivity to temperature during cycle aging, while electrode chemistry impacts depth-of-discharge sensitivity. Real-world battery lifetime is evaluated by simulating residential energy storage and commercial frequency containment reserve systems in several U.S. climate regions. Predicted lifetime across cell types varies from 7 years to 20+ years, though all cells are predicted to have at least 10 year life in certain conditions.

battery lifetime↗

Age and origin of IIE iron meteorites inferred from Hf-W chronology

Non-magmatic iron meteorites, including the IIE group, can provide important insights into the history of metal-silicate differentiation and collisions on planetesimals. To better constrain the evolution of metal segregation and impacts on the IIE parent body, W isotopic data are reported for 10 IIE iron meteorites and a metal vein from the Portales Valley H6 chondrite. In addition, Pt isotopic data were obtained to quantify cosmic ray-induced neutron capture effects on W isotopes. After correction for these effects, the IIE iron meteorites exhibit variable pre-exposure 182W compositions, translating into Hf-W model age clusters of ~4–5 million years (Ma), ~10 Ma, ~15 Ma, and ~27 Ma after CAI formation. These distinct 182 W clusters likely represent samples from several discrete metallic melt pools on the IIE parent asteroid. The earliest metal segregation event at ~4–5 Ma was likely facilitated by 26 Al decay as an internal heat source. By contrast, the younger Hf-W model ages may not be chronologically meaningful, and probably reflect the effects of secondary mixing and re-equilibration of metal and silicates, likely facilitated by impacts on the IIE parent body. Thus, contrary to prior work, the Hf-W systematics of IIE iron meteorites do not require a protracted history of metal-silicate separation on the IIE parent body. Instead the results of this study are fully consistent with a single partial metal-silicate differentiation event driven by endogenic heating at ~4–5 Ma, followed by one or multiple impact events causing mixing and re-equilibration of metal and silicates at a later stage. As a result, the exact timing of these impact event(s) remains poorly constrained, but they most likely occurred in the first few tens of Ma of Solar System history.

58 GEOSCIENCES↗

Glacial to periglacial transition at the end of the last ice age in the subtropical semiarid Andes

Atmospheric warming and circulation reorganization at the end of the last ice age represent the most important climate change of the last 100,000 years and provide an opportunity to uncover how the southern subtropics cryosphere responded to strong changes in the global climate system. Extensive mapping and chronologic records on cryogenic landforms to better understand the association and interactions between glaciers and viscous creep of ice-rich permafrost landforms (rock glaciers) are widely missing in the region. In this paper, we reconstruct the geomorphic imprint of the Last Glacial Maximum (LGM) and the Termination I in the high Andes of the Río Limarí Basin (30–31°S) in the subtropical semiarid Andes of Chile. 74 new 10 Be surface exposure dating ages constrain the timing of glaciation, deglaciation, and glacial to periglacial transition. Glacial advances occurred first by 41.2 ± 0.6 – 35.0 ± 0.5 ka during Marine Isotope Stage 3, but probably earlier also; then, a second advance occurred during the global LGM between 24.2 ± 0.4 and 18.6 ± 0.2 ka. Deglaciation by 17.6 ± 0.2 ka left extensive hummocky moraines on the main valleys. Characteristic patterns of furrows and ridges typical of rock glaciers and solifluction superimposed on the LGM hummocky moraine indicate ice-rich permafrost in glacial deposits likely between 15.5 ± 0.3 and 13.6 ± 0.3 ka. We propose that moraines deposited by LGM debris-covered glaciers served as a niche for strong seasonal frost and permafrost creep, which substantially modified the original landforms. Finally, our results contribute to a better understanding of major transformations in an ice-rich high mountain area of the southern hemisphere where the interplay of temperature and precipitation changes drove glacial to periglacial transitions.

10Be surface exposure dating↗

Should Women Younger Than 40 Years of Age With Invasive Breast Cancer Have a Mastectomy?: 15-Year Outcomes in a Population-Based Cohort

Purpose: Optimal local management for young women with early-stage breast cancer remains controversial. This study examined 15-year outcomes among women younger than 40 years treated with breast-conserving surgery plus whole-breast radiation therapy (BCT) compared with those treated with modified radical mastectomy (MRM). Methods and Materials: Women aged 20 to 39 years with early-stage breast cancer diagnosed between 1989 and 2003 were identified in a population-based database. Primary outcomes of breast cancer–specific survival (BCSS), overall survival (OS) and secondary outcomes of local relapse–free survival (LRFS), locoregional relapse–free survival (LRRFS), and distant relapse–free survival (DRFS) were calculated using Kaplan-Meier methods and compared between BCT and MRM cohorts using log-rank tests. A planned subgroup analysis was performed on patients considered “ideal” for BCT (ie, T1N0, negative margins and no extensive ductal carcinoma in situ) and in whom local therapy may have the largest impact on survival because of low systemic risk. Results: 965 patients were identified; 616 had BCT and 349 had MRM. The median follow-up time was 14.4 years (range, 8.4-23.3 years). Overall, 15-year rates of BCSS (76.0% vs 74.1%, P=.62), OS (74.2% vs 73.0%, P=.75), LRFS (85.4% vs 86.5%, P=.95), LRRFS (82.2% vs 81.6%, P=.61), and DRFS (74.4% vs 71.6%, P=.40) were similar between the BCT and MRM cohorts. In the “ideal” for BCT subgroup, there were 219 BCT and 67 MRM patients with a median follow-up time of 15.5 years. The 15-year BCSS (86.1% vs 82.9%, P=.57), OS (82.6% vs 82.9%, P=.89), LRFS (86.2% vs 84.2%, P=.50), LRRFS (83.1% vs 78.3%, P=.24), and DRFS (84.8% vs 79.1%, P=.17) were similar in the BCT and MRM cohorts. Conclusions: This population-based analysis with long-term follow-up confirmed that women younger than 40 years treated with BCT had similar 15-year outcomes compared with MRM. Young age alone is not a contraindication to BCT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

In the Modern Treatment Era, Is Breast Conservation Equivalent to Mastectomy in Women Younger Than 40 Years of Age? A Multi-Institution Study

Purpose: Mastectomy is often recommended for women ≤40 years of age with breast cancer, as young women were under-represented in the landmark trials comparing breast conservation therapy (BCT) to mastectomy. We hypothesized that, in the modern treatment era, BCT and mastectomy result in equivalent local control rates in young women. Methods and Materials: Breast cancer cases arising between 1975 and 2013 in women ≤40 years old were collected from the tumor registries of 2 large healthcare systems in Utah. Kaplan-Meier estimates and Cox proportional hazards models were used to analyze freedom from locoregional recurrence (FFLR), overall survival (OS), and relapse-free survival (RFS). Results: This analysis identified 853 BCT candidates. A comparison of BCT to mastectomy after 2000 showed FFLR, RFS, and OS were all similar. Rate for FFLR at 10 years was 94.9% versus 92.1% for BCT and mastectomy, respectively (P=.57). For women whose cancer was diagnosed after 2000, who received BCT, FFLR and RFS rates were improved compared to those whose cancer was diagnosed prior to 2000 (P<.05), whereas OS (P=.46) rates were similar. Among those who underwent mastectomy, FFLR, OS, and RFS were significantly improved (P<.05) with diagnosis after 2000. Conclusions: FFLR rates for young women, ≤40 years of age, have significantly improved for BCT and mastectomy over time. If patients were treated after 2000, BCT appears to be safe and equivalent to mastectomy at 10 years in terms of FFLR, OS, and RFS.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

10-Year Breast Cancer Outcomes in Women ≤35 Years of Age

Breast cancer diagnosis at a very young age has been independently correlated with worse outcomes. Appropriately intensifying treatment in these patients is warranted, even as we acknowledge the risks of potentially mutagenic adjuvant therapies. We examined local control, distant control, overall survival, and secondary malignancy rates by age cohort and by initial surgical strategy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Imaging Zn and Ni distributions in leaves of different ages of the hyperaccumulator Noccaea caerulescens by synchrotron-based X-ray fluorescence

Mapping of leaves of hyperaccumulators can provide insights into the mechanisms these species utilize to accumulate high metal concentrations. We used synchrotron-based X-ray fluorescence (SXRF) to perform Zn and Ni imaging in leaves of different ages of Noccaea caerulescens. A mature leaf of the related non-hyperaccumulator Thlaspi arvense was also imaged. The concentrations of Zn, Ni, Co, and Cr in N. caerulescens grown on an ultramafic soil were 9-, 10-, 12-, and 3-fold higher than T. arvense. N. caerulescens showed an exceptional ability to accumulate Zn from the soil, posing a bioconcentration factor of 6.7. T. arvense had Zn and Ni distributed uniformly in the leaf blade with doubling fluorescence counts in the tip and margins, suggesting a strategy to excrete metals and avoid toxicity. On the other hand, N. caerulescens displayed distinctly different Zn and Ni accumulation patterns, regardless of the age or metal concentration in the leaves. Zinc was mainly distributed in the cells surrounding the central and secondary veins. Nickel accumulated in the margins and tips of the leaf blade. Finally, given the time required to image large leaves in synchrotron facilities, small leaves can be used to represent the leaf distribution of Zn and Ni in N. caerulescens.

36 MATERIALS SCIENCE↗

Minimized aging of isocyanurate-based rigid cellular foams for buildings through tailored barrier facers and optimized formulation

The thermal resistivity (h·ft 2 ·°F/Btu/in.) of closed-cell rigid foam insulation materials significantly decreases over time. Diffusion-tight facers are designed to significantly enhance initial thermal resistivity and long-term thermal performance by preventing gas diffusion into the foam cells and inhibiting the escape of low thermal conductivity blowing agents. In addition to the gas diffusion property of the facer film, adhesion between the foam and the facer is crucial for achieving diffusion-tight bonding. Here, this study addresses the challenge of thermal aging by investigating how facer film properties and foam formulation influence the durability of thermal performance. A systematic evaluation was conducted to understand the effects of polymeric barrier films, surface treatments, facer coverage, and foam matrix rigidity on thermal resistivity over time. Key findings reveal that diffusion-tight facers, particularly those with metallized layers and compatible heat seal layers, significantly reduce gas exchange and improve foam-facer adhesion. The optimized system, incorporating barrier facers and a tailored polyisocyanurate foam formulation, achieved initial and aged thermal resistivity values after 200 days of approximately 8.3 and 7.4 h ft 2 ·°F/Btu/in., respectively representing only a 10 % reduction compared to a 17 % reduction observed in control samples without facers. Notably, polyurethane spray foams with facers exhibited only a 4 % reduction in thermal resistivity, compared to a 23 % decrease in control samples, demonstrating nearly six times better retention of thermal performance. This innovative facer technology presents a promising solution for reducing energy costs and represents a significant advancement in optimizing energy management for building envelopes in future technologies. This technology can also be adapted for other applications that necessitate the preservation of long-term thermal performance.

Wanasinghe, Shiwanka Vidarshi [Oak Ridge National ↗

Low-temperature synthesis of CuFeO{sub 2} (delafossite) at 70 °C: A new process solely by precipitation and ageing

This study presents a new low temperature synthesis method to obtain pure delafossite (Cu{sup 1+}Fe{sup 3+}O{sub 2}) at a temperature of 70 °C within 24 h. For the first time delafossite is synthesized solely by precipitation and subsequent ageing process and without usage of any additives controlling the oxidation state of copper. The synthesized material, called LT-delafossite, consists of pure Cu{sup 1+}Fe{sup 3+}O{sub 2} exclusive of any side products. Rietveld analysis confirms the presence of both 3R (space group (SG): R-3m) and 2H (SG: P6{sub 3}/mmc) polytypes in LT-delafossite. Electron microscopy images show nanometer-sized hexagonal plates with a diameter <500 nm and a thickness of <30 nm. Measurements of the magnetic susceptibility from 2 K to 350 K in zero-field show one peak ∼18.5 K, which is attributed to an AFM phase transition. Zero-field-cooled magnetization data between −14 T and +14 T at 2 K revealed an s-shape form around the origin having no remanent magnetization. - Highlights: • New process: low temperature synthesis of pure CuFeO{sub 2} nanoparticles. • Synthesis at 70 °C within 24 h solely by precipitation and ageing. • Nanoparticle characterization by XRD, FTIR, SEM, ICP–OES, TEM and Mößbauer. • Special magnetic properties of nano-sized CuFeO{sub 2} synthesized at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transmission electron microscopy study of precipitates in an artificially aged Al–12.7Si–0.7Mg alloy

An investigation of Al–12.7Si–0.7Mg alloy aged at 160 °C, 180 °C and 200 °C for 3 h was carried out in order to identify the precipitating phases. Regular transmission and high resolution electron microscopy (TEM and HREM) were employed for this purpose. The studies were focused on the dark spots and needle-shaped precipitates lying in (001){sub Al} plane. Based on the HREM observations, dark spots and needle-shaped precipitates have different characteristics. The results revealed that the ellipsoidal and needle-shaped precipitates along <100> direction of the matrix coexist in the alloy by tilting experiments at given aging condition. The ellipsoidal dark spot precipitates viewing along [001]{sub Al} is not cross-sectional image of needle-shaped precipitates along <001>{sub Al}. Needle-shaped precipitate is coherent with the matrix. The diffraction pattern associated with the ellipsoidal precipitates is consistent with β″ reported in literature. - Highlights: • Wrought Al–Si–Mg alloy has been investigated to identify the precipitating phases. • The ellipsoidal and needle-shaped precipitates coexist in wrought Al–Si–Mg alloy. • The needle-shaped and ellipsoidal precipitates exhibit different characteristics.

36 MATERIALS SCIENCE↗