Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK CAPACITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Toward a high-voltage fast-charging pouch cell with TiO 2 cathode coating and enhanced battery safety

Nickel-rich layered lithium transition metal oxides, LiNi x Co y Mn 1-x-y O 2 , are key cathode materials for high-energy lithium-ion batteries owing to their high specific capacity. However, the commercial deployment of nickel-rich oxides has been hampered by their poor thermostability and insufficient cycle life. In this work full batteries with uncoated and TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathodes and graphite anodes are compared in terms of electrochemical performance and safety behavior. The battery using a TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode exhibited better cyclic performance at high cutoff voltage. Electrochemical impedance spectroscopy analysis indicated that the TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode gave the battery a more stable charge transfer resistance. Transmission electron microscopy demonstrated that TiO 2 coating reduced accumulation of the cathode electrolyte interface layer on the particle surface. Time-of-flight secondary ion mass spectrometry demonstrated that TiO 2 coating markedly enhanced the interface stability of the cathode particle and protected the particle from serious etching by the electrolyte. Accelerating rate calorimetry revealed that the trigger temperature of thermal runaway for the battery using TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 as cathode material was 257 °C, which was higher than that of the battery with the uncoated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode (251 °C). In situ X-ray diffraction during heating demonstrated that this enhanced safety can be attributed to the suppressed phase evolution of the coated cathode material.

25 ENERGY STORAGE↗

NASICON Na 3 V 2 (PO 4 ) 3 Enables Quasi-Two-Stage Na + and Zn 2+ Intercalation for Multivalent Zinc Batteries

Identifying positive electrode materials capable of reversible multivalent electrochemistry in electrolytes containing divalent ions such as Mg 2+ , Ca 2+ , and Zn 2+ at high operating potentials remains an ongoing challenge in “beyond lithium-ion” research. In this paper, we explore the Zn 2+ charge-storage mechanism of a vanadium-based Na + superionic conductor (NASICON), Na 3 V 2 (PO 4 ) 3 . By using X-ray synchrotron techniques to unravel potential-dependent structure–property relationships, we ascribe the reversible electrochemical behavior of Na 3 V 2 (PO 4 ) 3 to a quasi-two-stage intercalation process that involves both Na+ and Zn 2+ . Initial charging of Na 3 V 2 (PO 4 ) 3 leads to a Na + -extracted phase corresponding to Na 3 V 2 (PO 4 ) 3 , whereas subsequent discharge results predominantly in Na + intercalation followed by Zn 2+ intercalation. Operando X-ray diffraction of Na 3 V 2 (PO 4 ) 3 was used to study the phase changes associated with the first charge/discharge process, and ex situ measurements were used to precisely link the changes in the crystal structure to a quasi-two-stage intercalation of Na + and Zn 2+ . The corresponding changes in the V-oxidation state, V-O coordination, and the presence of Zn 2+ were confirmed by X-ray absorption spectroscopy. The results of this work present a comprehensive understanding of the charge-storage properties for a well-established NASICON structure that confers both the high capacity (~100 mA h g -1 ) and high potential (1.35 and 1.1 V vs Zn/Zn 2+ ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light-Modulated Self-Assembly of Synthetic Nanotubes

Artificial biomolecular polymers with the capacity to respond to stimuli are emerging as a key component to the development of living materials and synthetic cells. Here, in this work, we demonstrate artificial DNA tubular nanostructures that form in response to light in a dose-dependent manner. These nanotubes assemble from programmable DNA tile motifs that are engineered to include a UV-responsive domain so that UV irradiation activates nanotube self-assembly. We demonstrate that the nanotube formation speed can be tuned by adjusting the UV dose. We then couple the light-dependent activation of tiles with RNA transcription, making it possible to control nanotube formation via concurrent physical and biochemical stimuli. Finally, we illustrate how UV activation effectively controls nanotube assembly in confinement as a rudimentary stimulus-responsive cytoskeletal system that can achieve various conformations in a minimal synthetic cell. This study contributes new tile designs that are immediately useful to building biomolecular scaffolds with controllable dynamics in response to multiple stimuli.

DNA nanotechnology↗

Quantification of heterogeneous, irreversible lithium plating in extreme fast charging of lithium-ion batteries

Realization of extreme fast charging (XFC, ≤15 minutes) of lithium-ion batteries is imperative for the widespread adoption of electric vehicles. However, dramatic capacity fading is associated with XFC, limiting its implementation. To quantitatively elucidate the effects of irreversible lithium plating and other degradation mechanisms on the cell capacity, it is important to understand the links between lithium plating and cell degradation at both the local and global (over the full cell) scales. Here, we study the nature of local lithium plating after hundreds of XFC cycles (charging C-rates ranging from 4C to 9C) in industrially-relevant pouch cells using spatially resolved X-ray diffraction. Our results reveal a spatial correlation at the mm scale between irreversible lithium plating on the anode, inactive lithiated graphite phases, and local state-of-charge of the cathode. In regions of plated lithium, additional lithium is locally and irreversibly trapped as lithiated graphite, contributing to the loss of lithium inventory (LLI) and to a local loss of active anode material. The total LLI in the cell from irreversibly plated lithium is linearly correlated to the capacity loss in the batteries after XFC cycling, with a non-zero offset originating from other parasitic side reactions. Finally, at the global (cell) scale, LLI drives the capacity fade, rather than electrode degradation. We anticipate that the understanding of lithium plating and other degradation mechanisms during XFC gained in this work will help lead to new approaches towards designing high-rate batteries in which irreversible lithium plating is minimized.

25 ENERGY STORAGE↗

Nano-level instrumentation for analyzing the dynamic accuracy of a rolling element bearing

The rotational performance of high-precision rolling bearings is fundamental to the overall accuracy of complex mechanical systems. A nano-level instrument to analyze rotational accuracy of high-precision bearings of machine tools under working conditions was developed. In this instrument, a high-precision (error motion < 0.15 μm) and high-stiffness (2600 N axial loading capacity) aerostatic spindle was applied to spin the test bearing. Operating conditions could be simulated effectively because of the large axial loading capacity. An air-cylinder, controlled by a proportional pressure regulator, was applied to drive an air-bearing subjected to non-contact and precise loaded axial forces. The measurement results on axial loading and rotation constraint with five remaining degrees of freedom were completely unconstrained and uninfluenced by the instrument's structure. Dual capacity displacement sensors with 10 nm resolution were applied to measure the error motion of the spindle using a double-probe error separation method. This enabled the separation of the spindle's error motion from the measurement results of the test bearing which were measured using two orthogonal laser displacement sensors with 5 nm resolution. Finally, a Lissajous figure was used to evaluate the non-repetitive run-out (NRRO) of the bearing at different axial forces and speeds. The measurement results at various axial loadings and speeds showed the standard deviations of the measurements’ repeatability and accuracy were less than 1% and 2%. Future studies will analyze the relationship between geometrical errors and NRRO, such as the ball diameter differences of and the geometrical errors in the grooves of rings.

42 ENGINEERING↗

Upgrading the LANSCE accelerator with a SNS RF-driven H− ion source

The LANSCE accelerator is currently powered by a filament-driven, biased converter-type H− ion source that operates at 10%, the highest plasma duty factor for this type of source, using only ∼2.2 SCCM of H2. The ion source needs to be replaced every 4 weeks, which takes up to 4 days. The measured negative beam current of 12–16 mA falls below the desired 24 mA acceptance of the LANCSE accelerator. The SNS (Spallation Neutron Source) RF-driven, H− ion source injects ∼50 mA of H− beam into the SNS accelerator at 60 Hz with a 6% duty factor and an availability of >99.5% but requires ∼30 SCCM of H2. Up to 7 A h of H− have been produced during the 14-weeks-long source service cycles, which is unprecedented for small emittance, high-current, pulsed H− ion sources. The emittance of the SNS source is slightly smaller than the emittance of the LANSCE source. The SNS source also features unrivaled low Cs consumption and can be installed and started up in <12 h. LANSCE and SNS are working toward the use of SNS H− ion sources on the LANSCE accelerator because they could (a) fill the LANSCE accelerator to its capacity, (b) decrease the source replacement time by a factor of up to 7, and (c) increase source lifetime by a factor of about 4. This paper discusses some of the challenges that emerge when trying to match a different H− source into an existing injector with significantly different characteristics and operating regimes.

Stockli, Martin P.↗

Detection of long-term trends in carbon accumulation by forests in Northeastern U.S. and determination of causal factors (Final Report)

The overall project goal was to quantify the trends and variability for Net ecosystem exchange of CO 2 , H 2 O, and energy by northeastern forests, with particular attention to the role of succession, differences in species composition, legacies of past land use, and disturbances. Measurements included flux measurements and observations of biomass accumulation using ecosystem modeling as a framework for data interpretation. Continuation of the long-term record at the Environmental Measurement Site (EMS) Tower was a priority. The final quality-assured CO 2 -flux data now extend through 2010. Data through 2011 are collected but not yet finalized. Biomass observations on the plot array centered on the tower are extended to 2011. Two additional towers in a hemlock stand (HEM) and a younger deciduous stand (LPH) complement the EMS tower by focusing on stands with different species composition or age distribution and disturbance history, but comparable climate and soil type. Over the period since 1993 the forest has added 24.4 Mg-C ha -1 in the living trees. Annual net carbon uptake had been increasing from about 2 Mg-C ha -1 y -1 in the early 1990s to nearly 6 Mg-C ha -1 y -1 by 2008, but declined in 2009-2010. We attribute the increasing carbon uptake to a combination of warmer temperatures, increased photosynthetic efficiency, and increased influence by subcanopy hemlocks that are active in the early spring and late autumn when temperatures are above freezing but the deciduous canopy is bare. Not all of the increased carbon accumulation was found in woody biomass. Results from a study using data to optimize parameters in an ecosystem process model indicate that significant changes in model parameters for photosynthetic capacity and shifts in allocation to slow cycling soil organic matter are necessary for the model to match the observed trends. The emerging working hypothesis is that the pattern of increasing carbon uptake over the early 2000's represents a transient pulse that will eventually end as decomposition of the accumulated carbon catches up.

54 ENVIRONMENTAL SCIENCES↗

Achieving Regional Energy Efficiency Potential in the Midwest

The Midwest Energy Efficiency Alliance report on actions to accelerate adoption of energy efficiency in the Midwest through regional collaborations with state and local governments, utilities, industry, environmental and consumer groups and other stakeholders in a 13 state region (IA, IL, IN, KS, KY, MI, MN, MO, NE, ND, OH, SD and WI). MEEA collaborated with multiple Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EE) programs, including the Buildings Technologies Program (BTP), Office of Strategic Programs (OSP), Weatherization and Intergovernmental Programs (WIP), and Advanced Manufacturing Office (AMO) to further energy efficiency efforts in the Midwest. In addition, MEEA collaborated with other Regional Energy Efficiency Organizations (REEOs) such as the Northwest, Northeast, Southwest and Southeast REEOs. Such alignment among all REEOs and with DOE sought to build increased workforce capacities nationwide to design, plan, deliver and verify energy efficiency solutions and make individual REEOs more successful in reaching their objectives. The proposed work accelerated deployment of DOE initiatives in local and regional markets, as well as coordinated the activities of each REEO for the dissemination of best practices.

03 NATURAL GAS↗

Enhanced Long-Duration Energy Storage Modeling [Slides]

As our power grid evolves toward a more renewable future, energy storage is poised to take a larger role in meeting growing energy needs. Energy storage could help keep the power system reliable even through potential outages, periods of extreme weather, and when generation from variable renewable technologies like wind and solar is low. Given the different durations of these stressors, grid analysts at the National Renewable Energy Laboratory (NREL) are working to better understand the role and benefits of long-duration energy storage - or storage technologies with 8-24 hours of storage capacity - in high variable renewable energy systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Reactive Element Approach to Improve Fracture Healing in Metallic Systems

Self-healing materials demonstrate the ability to close fractures and regain mechanical integrity after a catastrophic failure. However, self-healing in metals can be inhibited by the natural tendency for technologically-relevant metallic systems to oxidize on the crack surface. This study seeks to provide a thermodynamically-based mechanism to enhance healing capability at a solid/liquid interface through alloys designed with a reactive element alloying addition possessing a lower free energy of oxide formation than the parent element. In this study, model Sb-Cu and Sb-Zn systems enable comparisons between mechanistic behaviors based only on thermodynamic reactivity. Mechanical and microstructural investigation demonstrated that the more reactive alloying addition resulted in more effective bonding through increasing bond area and load-bearing capacity of the system. The improved bonding was attributed to improved wetting and reduction of the passivating surface oxide across an interface. The work has potential to advance self-healing capabilities in metallic systems through more appropriate alloy selection to enable improved healing.

36 MATERIALS SCIENCE↗

Guaranteeing synchronous message deadlines with the timed token medium access control protocol

We study the problem of guaranteeing synchronous message deadlines in token ring networks where the timed token medium access control protocol is employed. Synchronous capacity, defined as the maximum time for which a node can transmit its synchronous messages every time it receives the token, is a key parameter in the control of synchronous message transmission. To ensure the transmission of synchronous messages before their deadlines, synchronous capacities must be properly allocated to individual nodes. We address the issue of appropriate allocation of the synchronous capacities. Several synchronous capacity allocation schemes are analyzed in terms of their ability to satisfy deadline constraints of synchronous messages. We show that an inappropriate allocation of the synchronous capacities could cause message deadlines to be missed even if the synchronous traffic is extremely low. We propose a scheme called the normalized proportional allocation scheme which can guarantee the synchronous message deadlines for synchronous traffic of up to 33 percent of available utilization. To date, no other synchronous capacity allocation scheme has been reported to achieve such substantial performance. Another major contribution of this paper is an extension to the previous work on the bounded token rotation time. We prove that the time elapsed between any consecutive visits to a particular node is bounded by upsilon TTRT, where TTRT is the target token rotation time set up at system initialization time. The previous result by Johnson and Sevcik is a special case where upsilon = 2. We use this result in the analysis of various synchronous allocation schemes. It can also be applied in other similar studies.

Agrawal, Gopal↗

Characterization of CO2 Binding on Alkaline Metal Oxide Sorbents and DFMs for Combined Capture and Conversion

As the world endures environmental crises associated with climate change and the rise of atmospheric CO2 concentrations from anthropogenic CO2 emission, carbon capture and utilization (CCU) technologies are increasingly necessary. Reactive carbon capture (RCC) technologies, in which capture and conversion of CO2 occur in a single reactor, are more energetically and economically attractive by avoiding the need to purify, compress, and transport the captured CO2. To this end, the development of dual function materials (DFM) that enable CO2 capture and conversion to useful C1 products, namely (1) methane, (2) CO, and (3) methanol, are attractive near-term targets for commercial CCU processes for renewable fuels and chemicals. DFM are composed of sorbents and catalysts co-dispersed on the same high surface area carrier. The sorbent component allows for selective capture of CO2 from a gas stream and the catalyst component subsequently performs the in-situ conversion of the adsorbed CO2 upon introduction of a reactive gas (typically H2). The survey of DFM formulations reveals a variety of sorbent+catalyst combinations of interest. There is, however, a lack of depth in fundamental understanding of how the CO2 binds to these materials and how the subsequent reaction mechanisms are affected, which are critical features for the development of next-generation materials with improved performance. To this end, we will describe in this work the CO2 binding characteristics of established and/or new DFM and their sorbent-only counterparts. The surface CO2 binding mechanism and capture capacity will be probed using techniques such as in-situ DRIFTS, operando TGA, and CO2 chemisorption.

alkaline oxides↗

Synergetic Interactions between Uranium, Humic Acid, Silica Colloids and SRS Sediments at Variable pH - 16524

The Savannah River Site (SRS) was constructed during the 1950's and became one of the major producers of plutonium for the United States during the Cold War. During its production life, the F/H Area Seepage Basins received approximately 1.8 billion gallons of acidic waste containing radionuclides and dissolved heavy metals. This led to the creation of a highly contaminated groundwater plume with uranium (VI) as a key contaminant of concern within the plume. Now, as a designated hazardous waste management facility, the main activities taking place at the site are nuclear storage and remediation of contaminated soil and groundwater from radionuclides. Humic substances (HS) are major components of soil organic matter having the ability to influence migration behavior and fate of heavy metals and are being investigated for potential use in environmental remediation at SRS. Essentially, HS are polyfunctional organic macromolecules formed by the chemo-microbiological decomposition of biomass or dead organic matter. HS are able to interact with both metal ions and organic compounds based on solubility. Humic acid (HA) represents the fraction of HS soluble at pH greater than 3.5. HA carries a large number of functional groups, provides an important function in ion exchange and is a metal complexing ligand with a high complexation capacity. Silica is the term applied to solid forms with the stoichiometric composition of SiO{sub 2}. The colloidal silica used in this work is amorphous and non-porous in suspension; silica's net surface charge for pH values higher than 3 is negative, due to the isoelectric point being 1.5 - 2.5. Humic acid has been previously used in remediation techniques and silica is found naturally in the soil. This investigation studied the synergistic interactions between four key components: U(VI), humic acid (HA), colloidal silica and SRS sediment under varying pH conditions ranging from 3 to 8. Multi-component batch systems were constructed to effectively analyze the removal of U(VI). The batches were pH adjusted, left to equilibrate for a minimum of 48 hours on a shaker, and then centrifuged. A set of samples, filtered to remove any colloids in suspension, and a set of unfiltered samples were analyzed. For the samples at acidic pH, the uranyl cation is the dominant species; with increasing pH, the mononuclear and polynuclear hydrolyzed uranyl ions become dominant based on speciation modeling. In filtered samples, uranium removal is highest at low pH with the negatively charged moieties of HA readily binding to the uranyl cation. Percent removal of U(VI) steadily decreased with an increase in pH and then remained comparable at a neutral/alkaline pH with the change in uranyl speciation. The percentage of colloidal silica removal was observed to be approximately 80% for both sediment- and non-sediment-bearing samples. As the pH increased, the silica removal in the non-sediment set showed a slight decrease and was in the range of 70% - 75%. Uranium removal in the unfiltered samples showed similar trends as compared to the filtered samples; however, the removal of uranium in the unfiltered samples was slightly lower compared to the filtered samples. Colloidal silica removal in non-sediment-bearing batches showed a decline with increasing pH, from 90% to 50%; conversely, the silica removal remained constant for the sediment-bearing batches at approximately 60%. Colloidal silica does not seem to have a significant effect on the removal of U(VI) before filtration due to U(VI) bound to colloidal silica remaining in suspension. The presence of humic acid, silica colloids, and SRS sediment was shown to synergistically effect the removal of U(VI). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Complex defect chemistry of hydrothermally-synthesized Nb-substituted β$'$-LiVOPO 4

Lithium vanadyl phosphate (LiVOPO 4 ) is a next-generation multielectron battery cathode that can intercalate up to two Li-ions per V-ion through the redox couples of V 4+ /V 3+ and V 5+ /V 4+ . However, its rate capacity is undermined by the sluggish Li-ion diffusion in the high-voltage region (4 V for V 5+ /V 4+ redox). Nb substitution was used to expand the crystal lattice to facilitate Li-ion diffusion. Here, in this work, Nb substitution was achieved via hydrothermal synthesis, which resulted in a new, lower symmetry β'-LiVOPO 4 phase with preferential Nb occupation of one of the two V sites. This phase presents complex defect chemistries, including cation vacancies and hydrogen interstitials, characterized by a combination of X-ray and neutron diffraction, elemental and thermogravimetric analyses, X-ray absorption spectroscopy, and magnetic susceptibility measurements. The Nb-substituted samples demonstrated improved capacity retention and rate capabilities in the high-voltage region, albeit an enlarged voltage hysteresis related to a partial V 4+ /V 3+ redox reaction, as evidenced by ex situ X-ray absorption spectroscopy and pair distribution function analysis. This work highlights the importance of understanding the complex defect chemistry and its consequence on electrochemistry in polyanionic intercalation compounds.

36 MATERIALS SCIENCE↗

Interfacial Lattice-Strain-Driven Generation of Oxygen Vacancies in an Aerobic-Annealed TiO 2 (B) Electrode

Oxygen vacancies play crucial roles in defining physical and chemical properties of materials to enhance the performances in electronics, solar cells, catalysis, sensors, and energy conversion and storage. Conventional approaches to incorporate oxygen defects mainly rely on reducing the oxygen partial pressure for the removal of product to change the equilibrium position. However, directly affecting reactants to shift the reaction toward generating oxygen vacancies is lacking and to fill this blank in synthetic methodology is very challenging. In this work, a strategy is demonstrated to create oxygen vacancies through making the reaction energetically more favorable via applying interfacial strain on reactants by coating, using TiO 2 (B) as a model system. Geometrical phase analysis and density functional theory simulations verify that the formation energy of oxygen vacancies is largely decreased under external strain. Benefiting from these, the obtained oxygen-deficient TiO 2 (B) exhibits impressively high level of capacitive charge storage, e.g., ≈53% at 0.5 mV s –1 , far surpassing the ≈31% of the unmodified counterpart. Meanwhile, the modified electrode shows significantly enhanced rate capability delivering a capacity of 112 mAh g –1 at 20 C (≈6.7 A g –1 ), ≈30% higher than air-annealed TiO 2 and comparable to vacuum-calcined TiO 2 . This work heralds a new paradigm of mechanical manipulation of materials through interfacial control for rational defect engineering.

36 MATERIALS SCIENCE↗

Preservation of human performance capacity under prolonged space flight conditions

Prophylactic measures directed toward preservation of health and maintenance of the performance ability of a man during prolonged space flight stress center on the selection of optimum work and rest cycles, physical exercises, the use of pharmacological agents, conditioning of the cardiovascular apparatus, etc. A specially selected set of hormone and pharmacological preparations is recommended to stimulate hemopoiesis.

Yeremin, A. V.↗

Fresh and Spent Nuclear Fuel Repatriation from the IRT-2000 Research Reactor Facility, Sofia, Bulgaria

The IRT 2000 research reactor, operated by the Bulgarian Institute for Nuclear Research and Nuclear Energy (INRNE), safely shipped all of their Russian-origin nuclear fuel from the Republic of Bulgaria to the Russian Federation beginning in 2003 and completing in 2008. These fresh and spent fuel shipments removed all highly enriched uranium (HEU) from Bulgaria. The fresh fuel was shipped by air in December 2003 using trucks and a commercial cargo aircraft. One combined spent fuel shipment of HEU and low enriched uranium (LEU) was completed in July 2008 using high capacity VPVR/M casks transported by truck, barge, and rail. The HEU shipments were assisted by the Russian Research Reactor Fuel Return Program (RRRFR) and the LEU spent fuel shipment was funded by Bulgaria. This report describes the work, approvals, organizations, equipment, and agreements required to complete these shipments and concludes with several major lessons learned.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Controls Request Tracker

Controls groups at large accelerators are routinely called upon to build and support controls for virtually all machine systems. While construction projects within the US DOE system are normally carefully planned and tracked by project management professionals, this support ends when construction milestones are met. However, once construction is complete, work continues as the group performs ongoing support and maintenance while also implementing requested system improvements and upgrades. With customers from virtually every accelerator and experiment group, the demands on the group often exceed the capacity of available resources. This type of diverse workload needs to be well organized and managed in order set proper priorities and ensure efficient use of resources. At SNS, we have collaborated with Cosylab to develop Controls Request Tracker (CRT), which is adapted from the Cosylab Project Manager (CPM) software. The resulting system not only provides standard request tracking features, but is interfaced to the SNS Logbook and work control system. This paper will discuss CRT and how we use it to manage the work of our controls group.

project management controls↗