Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “System study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Mars power system concept definition study. Volume 1: Study results

A preliminary top level study was completed to define power system concepts applicable to Mars surface applications. This effort included definition of power system requirements and selection of power systems with the potential for high commonality. These power systems included dynamic isotope, Proton Exchange Membrane (PEM) regenerative fuel cell, sodium sulfur battery, photovoltaic, and reactor concepts. Design influencing factors were identified. Characterization studies were then done for each concept to determine system performance, size/volume, and mass. Operations studies were done to determine emplacement/deployment maintenance/servicing, and startup/shutdown requirements. Technology development roadmaps were written for each candidate power system (included in Volume 2). Example power system architectures were defined and compared on a mass basis. The dynamic isotope power system and nuclear reactor power system architectures had significantly lower total masses than the photovoltaic system architectures. Integrated development and deployment time phasing plans were completed for an example DIPS and reactor architecture option to determine the development strategies required to meet the mission scenario requirements.

Littman, Franklin D.↗

Onymous early‐life performance degradation analysis of recent photovoltaic module technologies

Abstract The cost of photovoltaic (PV) modules has declined by 85% since 2010. To achieve this reduction, manufacturers altered module designs and bill of materials; changes that could affect module durability and reliability. To determine if these changes have affected module durability, we measured the performance degradation of 834 fielded PV modules representing 13 module types from 7 manufacturers in 3 climates over 5 years. Degradation rates ( Rd ) are highly nonlinear over time, and seasonal variations are present in some module types. Mean and median degradation rate values of −0.62%/year and −0.58%/year, respectively, are consistent with rates measured for older modules. Of the 23 systems studied, 6 have degradation rates that will exceed the warranty limits in the future, whereas 13 systems demonstrate the potential of achieving lifetimes beyond 30 years, assuming Rd trends have stabilized.

14 SOLAR ENERGY↗

Fabrication of Tantalum and Hafnium Carbide Fibers via Forcespinning TM for Ultrahigh‐Temperature Applications

In this work, a novel method for producing ultrafine tantalum and hafnium carbide fibers using the Forcespinning TM technique via a nonhalide‐based sol‐gel process was investigated. An optimal solution viscosity range was systematically determined via rheological studies of neat PAN/DMF as a function of fiber formation. Subsequently, Forcespinning TM parameters were also systemically studied to determine the optimal rotational velocity and spinneret‐to‐collecting rod distance required for ideal fiber formation. TaC and HfC fibers were synthesized via Forcespinning TM utilizing a mixture of PAN and refractory transition metal alkoxides (i.e., tantalum (V) ethoxide and hafnium (IV) tert‐butoxide) in DMF solution based on optimal conditions determined from the neat PAN/DMF. In all instances after calcination, powder X‐ray diffraction (PXRD) and energy dispersive spectroscopy (EDS) indicated that TaC and HfC fibers were produced. TGA/DSC confirmed the chemical stability of the resulting fibers.

Lee, Harold O.↗

Stress ratio effect on cyclic debonding in adhesively bonded composite joints

A study was conducted to investigate the stress ratio effect on cyclic debond growth behavior in adhesively bonded composite joints. The system studied consisted of graphite/epoxy adherends bonded with a toughened epoxy adhesive. This study showed that the strain energy release rate range was the driving factor for cyclic debonding of the tested bonded system when subjected to cyclic loads with different stress ratios for both mode I and mixed mode I-II loadings.

Mall, S.↗

NASA's Advanced Propulsion Technology Activities for Third Generation Fully Reusable Launch Vehicle Applications

NASA's Office of Aeronautics and Space Transportation Technology (OASTT) established the following three major goals, referred to as "The Three Pillars for Success": Global Civil Aviation, Revolutionary Technology Leaps, and Access to Space. The Advanced Space Transportation Program Office (ASTP) at the NASA's Marshall Space Flight Center in Huntsville, Ala. focuses on future space transportation technologies under the "Access to Space" pillar. The Propulsion Projects within ASTP under the investment area of Spaceliner100, focus on the earth-to-orbit (ETO) third generation reusable launch vehicle technologies. The goals of Spaceliner 100 is to reduce cost by a factor of 100 and improve safety by a factor of 10,000 over current conditions. The ETO Propulsion Projects in ASTP, are actively developing combination/combined-cycle propulsion technologies that utilized airbreathing propulsion during a major portion of the trajectory. System integration, components, materials and advanced rocket technologies are also being pursued. Over the last several years, one of the main thrusts has been to develop rocket-based combined cycle (RBCC) technologies. The focus has been on conducting ground tests of several engine designs to establish the RBCC flowpaths performance. Flowpath testing of three different RBCC engine designs is progressing. Additionally, vehicle system studies are being conducted to assess potential operational space access vehicles utilizing combined-cycle propulsion systems. The design, manufacturing, and ground testing of a scale flight-type engine are planned. The first flight demonstration of an airbreathing combined cycle propulsion system is envisioned around 2005. The paper will describe the advanced propulsion technologies that are being being developed under the ETO activities in the ASTP program. Progress, findings, and future activities for the propulsion technologies will be discussed.

Hueter, Uwe↗

Integrated Components Technology Demonstrations Overview

Integrated Components Technology Demonstrations (ICTD) is a project under the Ultra-Efficient Engine Technology Program (UEET) as designated in the UEET Program Commitment Agreement. The ICTD Project will provide the opportunity to conduct technology demonstration tests of advanced turbine engine components (e.g., combustor, compressor, turbine, and materials) as part of an integrated system (TRL 6). Initially, the major objectives of the Integrated Components Technology Demonstrations project are to Conduct component technology evaluation and system studies to determine, and prioritize, the most promising propulsion concepts, cycle, and architecture for a propulsion system with a Technology Availability Date of approximately 2010 and Entry Into Service of 2015. Determine the most attractive, cost-effective approaches for conducting the needed demonstration tests. Conduct demonstration tests of selected component technologies (i.e.,2200 F CMC combustor liner and aspirating seal) in partnership with industry.

Long-Davis, Mary Jo↗

Open Rotor Development

The ERA project executed a comprehensive test program for Open Rotor aerodynamic and acoustic performance. System studies used the data to estimate the fuel burn savings and acoustic margin for an aircraft system with open rotor propulsion. The acoustic measurements were used to produce an auralization that compares the legacy blades to the current generation of open rotor designs.

Open Rotors↗

Strapdown system Performance Optimization Test evaluations (SPOT), volume 2

A three axis inertial system is packaged in an Apollo gimbal fixture for fine grain evaluation of strapdown system performance in dynamic environments. These evaluations have provided information to assess the effectiveness of real-time compensation techniques and to study system performance tradeoffs to factors such as quantization iteration rate. The strapdown performance and tradeoff studies conducted in this program are discussed.

Blaha, R. J.↗

Geoscience Laser Ranging System design and performance predictions

The Geoscience Laser System (GLRS) will be a high-precision distance-measuring instrument planned for deployment on the EOS-B platform. Its primary objectives are to perform ranging measurements to ground targets to monitor crustal deformation and tectonic plate motions, and nadir-looking altimetry to determine ice sheet thicknesses, surface topography, and vertical profiles of clouds and aerosols. The system uses a mode-locked, 3-color Nd:YAG laser source, a Microchannel Plate-PMT for absolute time-of-flight (TOF) measurement (at 532 nm), a streak camera for TOF 2-color dispersion measurement (532 nm and 355 nm), and a Si avalanche photodiode for altimeter waveform detection (1064 nm). The performance goals are to make ranging measurements to ground targets with about 1 cm accuracy, and altimetry height measurements over ice with 10 cm accuracy. This paper presents an overview of the design concept developed during a phase B study. System engineering issues and trade studies are discussed, with particular attention to error budgets and performance predictions.

Anderson, Kent L.↗

Propeller modulation effects on a scanning-beam microwave landing system

The results of a systems study and ground test of the effects of propeller modulation on a time-multiplexed, scanning-beam microwave landing system (MLS) are presented. Propeller modulation effects are analyzed in terms of spacing between receiving antenna and propeller, propeller blade width, and propeller speed. Principal study conclusions: (1) scanning beam MLS is susceptible to errors due to synchronous propeller modulation; (2) the number of synchronous interference multiples increases as the number of propeller blades increases and as the data rate decreases; (3) the probability of synchronous interference decreases at higher data rates; and (4) MLS receiver susceptibility to propeller modulation depends upon the dynamic response of the receiver automatic gain control and the respective tracking loops.

Pope, J. M.↗

Radar Studies in the Solar System

We aid in study of the solar system by means of ground-based radar. We have concentrated on: (1) developing the ephemerides needed to acquire radar data at Arecibo Observatory and (2) analyzing the resultant data to: test fundamental laws of gravitation; determine the size , shape, topography, and spin vectors of the targets; and study the surface properties of these objects, through their scattering law and polarization characteristics. We are engaged in radar observations of asteroids and comets, both as systematically planned targets and as "targets of opportunity." In the course of the program, we have prepared ephemerides for about 80 asteroids and three comets, and the radar observations have been made or attempted at the Arecibo Observatory, in most cases successfully, and in some cases on more than one apparition. The results of these observations have included echo spectra for the targets and, in some cases, delay - Doppler images and measurements of the total round-trip delay to the targets. Perhaps the most dramatic of these results are the images obtained for asteroids (4179) Toutatis and 1989PB (Castalia), which were revealed to be double-lobed objects by the radar images. Besides these direct results, the radar observations have furnished information on the sizes and shapes of the targets through analysis of the Doppler width of the echoes as a function of time, and on the surface properties (such as composition, bulk density, and roughness) through analysis of the reflectivity and of the polarization state of the echoes. We have also refined the orbits of the observed asteroids as a result of the Doppler (and in some cases delay) measurements from the radar observations. Although the orbits of main-belt asteroids accessible to ground-based radar are quite well known from the available optical data, some near-Earth objects have been seen by radar very soon after their optical discovery (for example, 199OMF, just eight days after discovery). In such cases. the radar results ensure that the object in question can be anticipated and identified at the next apparition. We have also participated in radar studies of the terrestrial planets. The results of these studies have included both planetary topography profiles from the analysis of round-trip delays to points along the target Doppler equator and determinations of the target spin state. The latter is of special interest in the case of Venus, which is very close to, but not on, a multi-body spin-orbit resonance such that Venus rotates 12 times for every 8 Earth orbits and 13 Venus orbits. As a result, Venus presents nearly the same face toward Earth at each inferior conjunction. Our latest results confirm that the spin state of Venus is slightly off the resonance. The delay measurements from planetary 2 ranging have also been used in combination with other types of range data in testing general relativity with increasing accuracy. We have also been engaged in radar studies of planetary satellites. Using our ephemerides, Arecibo made radar observations of the Galilean satellites of Jupiter and of Mars' satellite Phobos during the favorable opposition seasons (1988-1992 for Jupiter and 1990 for Mars). An attempt was also made to observe Deimos, but without detecting an echo. In 1997, an attempt was made to observe Saturn's satellite Titan, using the newly upgraded Arecibo radar system for transmitting and the Goldstone radar for receiving, but no echo was detected. The study of satellites by radar is in many ways similar to that of asteroids. The results from these observations have included characterization of the surface properties from the reflectivity and polarization ratio, as well as (in the case of the large satellites of Jupiter) the variation of reflectivity with incidence angle.

Shaprio, Irwin I.↗

Influence of structural dynamics on vehicle design - Government view

Dynamic design considerations for aerospace vehicles are discussed, taking into account fixed wing aircraft, rotary wing aircraft, and launch, space, and reentry vehicles. It is pointed out that space vehicles have probably had the most significant design problems from the standpoint of structural dynamics, because their large lightweight structures are highly nonlinear. Examples of problems in the case of conventional aircraft include the flutter encountered by high performance military aircraft with external stores. A description is presented of a number of examples which illustrate the direction of present efforts for improving aircraft efficiency. Attention is given to the results of studies on the structural design concepts for the arrow-wing supersonic cruise aircraft configuration and a system study on low-wing-loading, short haul transports.

Kordes, E. E.↗

Solar electric propulsion and interorbital transportation

In-house MSFC and contracted systems studies have evaluated the requirements associated with candidate SEP missions and the results point to a standard system approach for both program flexibility and economy. The prospects for economical space transportation in the 1980s have already provided a stimulus for Space Industrialization (SI) planning. Two SI initiatives that are used as examples for interorbital transportation requirements are discussed - Public Service Platforms and Satellite Power System. The interorbital requirements for SI range from support of manned geosynchronous missions to transfers of bulk cargo and large-delicate space structures from low earth orbit to geosynchronous orbit.

Austin, R. E.↗

Recent advances in Alkali Metal Thermoelectric Converter (AMTEC) electrode performance and modeling

The Alkali Metal Thermoelectric Converter (AMTEC) is a direct energy conversion device, utilizing a high sodium vapor pressure or activity ratio across a beta-double prime-alumina solid electrolyte (BASE). This paper describes progress on the remaining scientific issue which must be resolved to demonstrate AMTEC feasibility for space power systems: a stable, high power density electrode. Two electrode systems have recently been discovered at JPL that now have the potential to meet space power requirements. One of these is a very thin sputtered molybdenum film, less than 0.5 micron thick, with overlying current collection grids. This electrode has experimentally demonstrated stable performance at 0.4-0.5 W/sq cm for hundreds of hours. Recent modeling results show that at least 0.7 W/sq cm can be achieved. The model of electrode performance now includes all loss mechanisms, including charge transfer resistances at the electrode/electrolyte interface. A second electrode composition, cosputtered platinum/tungsten, has demonstrated 0.8 W/sq cm for 160 hours. Systems studies show that a stable electrode performance of 0.6 W/sq cm will enable high efficiency space power systems.

Bankston, C. P.↗

Traceable and Scalable Food Balance Sheets from Agricultural Commodity Supply and Utilization Accounts (2010–2022)

Abstract The Food Balance Sheets (FBS), compiled by the Food and Agriculture Organization (FAO), serve as a cornerstone dataset for studies on agricultural development, food security, and dietary health, providing a broad overview of global and regional food systems. However, its limited transparency and scalability hinder its application in empirical analysis and multisector dynamic modeling. Here, we present a traceable Food Balance Sheets (T-FBS) dataset, developed from detailed Supply Utilization Accounts (SUA) using a novel Primary Commodity equivalent (PCe) aggregation approach. This framework enables the aggregation of commodity flows along supply chains while ensuring consistency and balance across multiple dimensions. The T-FBS dataset includes 57 PCe commodities across 195 regions for the period 2010–2022, consolidated from over 500 SUA products. While T-FBS closely aligns with FAO-FBS at aggregate levels for dietary energy and macronutrients, it identifies key uncertainties in other elements (e.g., feed, trade, stocks). By enhancing methodological transparency, traceability, and scalability, T-FBS strengthens the robustness of food system studies and fosters future research and collaboration within the open-source community.

agriculture↗

Comparison of two gas chromatograph models and analysis of binary data

The overall objective of the gas chromatograph system studies is to generate fundamental design criteria and techniques to be used in the optimum design of the system. The particular tasks currently being undertaken are the comparison of two mathematical models of the chromatograph and the analysis of binary system data. The predictions of two mathematical models, an equilibrium absorption model and a non-equilibrium absorption model exhibit the same weaknesses in their inability to predict chromatogram spreading for certain systems. The analysis of binary data using the equilibrium absorption model confirms that, for the systems considered, superposition of predicted single component behaviors is a first order representation of actual binary data. Composition effects produce non-idealities which limit the rigorous validity of superposition.

Keba, P. S.↗